Whistler WIC-3509P User Manual

Size:
3.27 Mb
Download

Wireless Inspection Camera with Recording Color LCD Monitor

Model No.: WIC-3509P

The Whistler Group Corporate Headquarters

Customer Return Center

3604 NW Frontage Rd. • Bentonville, AR 72712

551 N. 13th St. • Rogers, AR 72756

Tel 479.273.6012 • Fax 479.273.2927

Customer Service Tel 800.531.0004

www.whistlergroup.com

Version No.: 1.0

Please read this User Manual carefully before using the product!

Welcome

1

Packing List

2

Component/Controls

3

Installation

4

Operation

7

Basic Operation

7

Other Operations & Settings For Monitor

8

Record Video

8

Take Photo

9

Play Video/Feature

10

Delete Video/Feature

11

Delete Folder

12

Language Setting

13

Video System Setting

13

Format

14

Default Setup

14

View Version Information

15

Frame Rate Setting

15

Time Stamp Setting

15

Recording Type

16

Date/Time Setting

17

Event Playback

17

Specifications

18

Caution

19

Warranty

20

Accessories

21

FCC Information

Back Cover

Customer Service 1-800-531-0004
Monday - Friday • 8:00 am - 5:00 pm CT or visit our website: www.whistlergroup.com

Thank you for choosing our wireless inspection camera. Please read the user manual carefully before using this product. This product is designed as a remote inspection device. It can be used to look into tight spots and wirelessly transmit real-timevideo to the monitor. Typical applications include HVAC, automotive inspection, cable routing, etc.

If you have questions concerning the operation of this Whistler product, please call:

Please keep the receipt in a safe place.You may register your product online at www.whistlergroup.com. For warranty verification purposes, a copy of your dated store receipt must accompany any unit sent in for warranty work. If the unit

is returned without a dated store receipt, an out of warranty service charge applies. Note: Your warranty period begins at the time of purchase. The warranty is validated only by dated store receipt! Please record the serial numbers (located on the back of the monitor and inside the grip’s battery compartment door) in the space provided in the warranty section of the manual.

Enjoy your Whistler Inspection Camera.

Sincerely,

The Whistler Group, Inc.

- 1 -

Handheld Grip

9mm Camera with

3.5 in. LCD Monitor

3 ft. tube

Mirror Accessory

Magnet Accessory

Hook Accessory

Clip

Clip

Clip

Accessory Collar

Adapter Cable

Power Adapter

Magnetic Swivel

Mount

- 2 -

COMPONENTS / CONTROLS

- 3 -

Install the batteries, camera tube, and micro SD card (optional) before using product.

3. Reinstall battery compartment, cover, and screw.

When connecting the camera tube to the handheld unit, make sure the keyed ends are properly aligned. Once they are lined up, finger tighten the knob to hold the connector in place.

 

Engage Camera Tube Plug

 

Finger tighten the knurled knob

 

and Grip Socket

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

- 4 -

The product also supports wired use by connecting the monitor to the camera.

Install the Magnetic Swivel Mount

The magnetic swivel mount can be used to secure the monitor to a metal object Install the bracket as shown below.

The three included accessories (mirror, hook, and magnet) all attach to the camera (image head) in the same manner. Slide the accessory through the plastic holder, aligning it with the notch in holder.

Engage the “hook” on the accessory end with hole in the camera head. Slide the plastic holder onto the camera head until it clicks to lock.

Accessory

Notch

Hole

Plastic Holder

Image head

 

 

 

Slide Plastic Holder

 

 

onto image head

Accessory Installed

- 5 -

(Optional)

After the SD Card is inserted properly, the monitor will indicate icon; otherwiseicon will appear.

(Optional)

on playback.

Connect the adapter to the monitor and plug the adapter into a 110v AC outlet.The power indicator will illuminate red or the battery capacity icon will indicate charging, and will turn off after a full charge.

- 6 -

Rotate the ON/OFF switch to turn on the camera. The power indicator on top of the grip will illuminate. The intensity of the LEDs that surround the camera on the imager head can be adjusted by rotating the switch.

OFF

ON

on

the

Rotate the ON/OFF switch for better image effect.

- 7 -

Gently guide the tube into the desired location. Slight adjustments can be made while maneuvering the head in a forward direction.

The flexible tube can be bent to accommodate exploration in a variety of locations.

1. During operation, press button to enter VIDEO mode:

- 8 -