Whistler 1710, 1730 User Manual

1710/1730 manual 10/19/01 3:56 PM Page 1

OWNER’S MANUAL

1710/1730

LASER/RADAR DETECTOR

THE WHISTLER GROUP

CORPORATE HEADQUARTERS

13016 N. Walton Blvd.

Bentonville, AR 72712

TEL [phone] FX [phone] email: [e-mail] www.whistlergroup.com

PRODUCT DEVELOPMENT CENTER

25 Industrial Ave.

Chelmsford, MA 01824

TEL [phone] FX [phone]

CUSTOMER RETURN CENTER

1201 N. Dixieland Rd.

Rogers, AR 72756

Consumer Relations Tel [phone]

P/N 1710/1730, © WHISTLER 2001

1710/1730 manual 10/19/01 3:56 PM Page 3

INTRODUCTION

Dear Whistler Owner,

For many of us, a vehicle is more than just transportation. It can be a mobile office, communications or entertainment center, or simply an expression of our personality. Whistler products are designed to make the time you spend in your vehicle more productive, more fulfilling, safer, or just simply more fun. Our mission is to provide products that improve your driving experience.

Your new Whistler 1710/1730 laser/radar detector detects all radar, laser and safety radar systems, plus offers the new Safety Warning System™ technology. This provides advanced warning of various highway hazards in communities where available, enabling you to respond more appropriately to potentially dangerous conditions. The Whistler 1730 also offers the benefit of the VG-2 mode.

To fully acquaint yourself with the operation of the Whistler radar detector and to better understand the differences between detecting radar, laser and safety radar signals, we recommend reading this entire manual.

Enjoy the Whistler 1710/1730 and please drive safely.

Sincerely,

THE WHISTLER GROUP

1

1710/1730 manual 10/19/01 3:56 PM Page 5

	TABLE OF CONTENTS		WHISTLER FEATURES
	Whistler 1730 shown
		8
	2	1					7

6

5

3

4

Whistler’s ergonomic and user-friendly design provides a new level of operating convenience. Special features include:

1. Rear Laser Antenna (1730 only) – An integrated optical waveguide provides superior detection of laser signals transmitted from behind.

2. Bracket Release Button – Provides quick and easy release of the mounting bracket.

3. Power/Volume Control – Turns unit on/off and adjusts audio level.

4. QUIET/Auto Quiet Button – Pressing QUIET before a signal is detected engages Auto Quiet Mode. Pressing QUIET during a radar/laser encounter silences audio alerts, while allowing visual alerts to keep you informed.

2	3

1710/1730 manual 10/19/01 3:56 PM Page 7

WHISTLER FEATURES

5.VG-2 Button (1730 only) – Engages (one beep) or disengages (2 beeps) VG-2 Cloaking Technology™ for nondetectibility.

6.CITY Button – Reduces the annoyance of false alerts typically encountered in urban driving areas.

7.Speaker – Provides distinct audio warnings for X, K, Ka band radar, safety radar, laser and the VG-2.

8.Power Jack – Provides connection for the power cord.

9.Radar Antenna – Compact, high-efficiency antenna receives radar signals.

10.Laser Antenna (Front) – High gain optical lens array provides increased sensitivity and field of view for leadingedge laser detection.

11.Mounting Bracket Location – Slot holds mounting bracket firmly.

WHISTLER FEATURES

Accessories

Accessories included are highly functional and easy to use.

Power Cord - Connects to the unit’s power jack and your vehicle’s lighter socket.

Windshield Bracket - Allows installation of unit on your vehicle’s windshield.

Hook & Loop Fasteners - Designed to secure the unit on a level dashboard.

4	5

1710/1730 manual 10/19/01 3:56 PM Page 9

INSTALLATION

Mounting Guidelines

•Mount the unit as low as possible near the center of the windshield.

•Do not mount your unit behind wipers, ornaments, mirrored sunscreens, etc. These obstructions have metal surfaces which can affect radar and laser signals and reduce critical warning time. (Regular tinted glass does not affect reception.)

•Some newer windshields have an Instaclear™ or Electriclear™ type coating, which affect radar signals. Consult your dealer or the owner’s manual supplied with your vehicle to determine if your windshield has this coating.

•Avoid placing unit in direct contact with windshield.

•To reduce the possibility of theft, conceal your unit when not in use.

Windshield Mounting

•Install the two suction cups and rubber bumper onto the bracket by fitting them into their holes.

•Press the suction cups onto the windshield at the location you have chosen. IMPORTANT: Some newer cars have a plastic safety coating on the inside of the windshield. The windshield bracket may leave permanent marks on this type of surface. To find out if your vehicle has this type of windshield, check the owner’s manual or ask your dealer. We recommend that you do not leave the suction cup bracket on the window in direct sunlight. If the detector is removed, this may cause blistering of the dash in some vehicles.

•Slide the detector onto the bracket until it locks into place.

•If necessary, the unit may be leveled by bending the wind-

6

INSTALLATION

shield bracket. Press the bracket release button and remove the detector before bending.

Dash Mounting

•Make sure the mounting location you have chosen is relatively level and is clean and dry. Clean with isopropyl alcohol if necessary to remove any waxes or polishes.

•Separate the fastener strips. Peel the paper backing off each strip and adhere one piece to the dash and the other piece to the bottom of the unit, taking care not to cover the serial number.

Be careful not to place the fastener strip over the unit’s serial number. If the fastener strip is removed, the serial number may be pulled off the unit. Units without serial numbers are not covered under warranty.

7