Whistler 2000 WATT, 3000 WATT, 1200 WATT User Manual

0 (0)

OWNER’S MANUAL

1200/2000/3000 WATT SERIES

HIGH SURGE POWER INVERTERS

THE WHISTLER GROUP, INC. CORPORATE HEADQUARTERS

13016 N. Walton Blvd.

Bentonville, AR 72712

TEL (479) 273-6012 FX (479) 273-2927 www.whistlergroup.com

CUSTOMER RETURN CENTER

1201 N. Dixieland Rd. Rogers, AR 72756

Consumer Relations Tel (800) 531-0004 Email: info@whistlergroup.com

P/N 20562

© 2004 The Whistler Group, Inc.

If you have questions concerning the operation of this Whistler product please call customer service:

1-800-531-0004

Hours:

Monday - Friday 8:00 am - 5:00 pm CT

Please keep the receipt in a safe place. You may register your product online at www.whistlergroup.com. If the unit is returned without a dated proof of purchase, an out of warranty service charge applies. Note: Your warranty period begins at the time of purchase. The warranty is validated only by your receipt.

Now is the time to record the serial number of the unit in the space provided in the warranty section of the manual.

INTRODUCTION

Dear Whistler Owner,

For many of us, a vehicle is more than just transportation. It can be a mobile office, communications or entertainment center, or simply an expression of our personality. Whistler products are designed to make the time you spend in your vehicle more productive, more fulfilling, safer, or just simply more fun. Our mission is to provide products that improve your driving experience.

Whistler offers a complete line of DC to AC inverters ranging in capacity from 75 Watts to 3000 Watts. These inverters offer advanced technology, dependable operation and will provide years of reliable service when used in accordance with our operating instructions.

Your new Whistler power inverter allows you to run most AC appliances right from your car, boat or RV. They’re great for weekend use and life on the road. They’re also great for power outages from 1200 thru 3000 watts. To fully acquaint yourself with the operation of your Whistler power inverter we recommend reading this entire manual.

Sincerely,

THE WHISTLER GROUP, INC.

1

1200 watt series shown

TABLE OF CONTENTS

Topic

Page

Features Summary ..................................................................

 

3-7

Important Information................................................................

 

8

Inverter Information ............................................................

9

- 11

• Getting Started

 

 

• Don’t Push It

 

 

Battery Information...........................................................

11

- 13

• Selecting the Optimum Power Source

 

 

Cable Information .............................................................

13

- 14

• Wire Cable Gauges

 

 

Operation ..........................................................................

15

- 23

• Making the Connection

 

 

• Tips

 

 

• Recharging Equipment

 

 

• Power Source

 

 

• TV’s & Microwaves

 

 

Technical Operating Principles........................................

23

- 25

Operation Summary .........................................................

25

- 27

Troubleshooting ................................................................

28

- 29

Specifications............................................................................

 

30

Warranty Information ...............................................................

 

31

 

 

 

2

WHISTLER FEATURES

A Word About Whistler Power Inverters

Whistler inverters convert low voltage, direct current (DC) to 110 volt alternating household current (AC). The AC output is called “modified sine wave”. See “Technical Operating Principles” section for more information. Depending on the model and its rated capacity, Whistler inverters draw power either from standard 12 volt automobile and marine batteries or from portable high power 12 volt sources.

 

b

d

Inverter Features

e

 

a

c

a). ON/OFF Switch. This switch controls the flow of power from the power source to the inverter. It does not control the power running from the inverter to the equipment or appliance being operated.

b). High Temperature LED Indicator Light. This light will turn RED and the inverter will automatically shut down when the internal temperature exceeds design parameters for safe operation. When this occurs, turn the equipment or appliance off.

In the event of excess temperature, the High Speed Cooling

3

FEATURES

Fan also will automatically turn on. Overheating may result when the inverter is being operated at levels exceeding its wattage rating or because it has been placed in a location or in an manner which prevents proper heat dissipation. After approximately 15 minutes, the High Temperature Indicator light and the Cooling Fan will turn off and the inverter will automatically restart indicating that the inverter temperature has dropped to a safe operating level.

Over Load LED Indicator Light. This light will turn RED and the inverter will automatically shut down when the continuous power draw from the inverter exceeds the maximum continuous power rating for the inverter. Turn the inverter OFF (O), determine and resolve the cause of the overload prior to resuming operation of the equipment or appliance. Turning the inverter ON (I) will reset it.

c).Remote Operation Jack.

The inverter is designed to be operated from a remote location via the WHISTLER PP015DC Remote Control Switch which plugs into this socket. This optional accessory is available through WHISTLER or your WHISTLER dealer.

i

2000 watt series shown

j

FEATURES

d). Wattage & Voltage

Wattage Indicator. This illuminated Digital display monitors the wattage being consumed by the inverter.

When the reading rises above the rated limits, the inverter may automatically shut down. In this event, it is likely that the draw of the equipment or appliance being operated is greater than the battery is capable of producing.

Voltage Indicator. This Digital display monitors the voltage being drawn from the battery by the inverter. The voltage is measured at the Negative and Positive power input terminals on the inverter. The voltage level reading will be lower than the battery voltage due to the voltage "drop" that occurs as the battery voltage runs through the terminal connections and cables.

The inverter is designed to operate with input voltages ranging from 10 to 15 volts. When the voltage drops below 10.5 volts DC an audible alarm will sound. If the voltage drops below 10 volts DC, the voltage indicator will go out and the inverter will automatically shut down. The inverter also will shut down automatically when the input voltage exceeds 15 volts DC. Despite this "built in" protection, the inverter may be damaged if the input voltage exceeds 15 volts DC and damage caused by excess voltage input is not covered under the WHISTLER warranty.

Note: In the event of automatic shut down or continuous audible alarm, turn the inverter OFF (O) until the source of the related problem has been determined and resolved.

4

5

Whistler 2000 WATT, 3000 WATT, 1200 WATT User Manual

FEATURES

e). Standard North American 110 AC Outlets are provided.

f). High Speed Cooling Fan. This fan will turn on automatically when the internal temperature exceeds design parameters for safe operation. The Cooling Fan will automatically turn off when the temperature drops to a safe operating level. This fan does not run continuously.

h). Power Input Terminals

Make note of the proper polarity.

i). Chassis Ground Terminal Lug.

Note:

The 3000 watt inverters incorporates all of the operating and safety features of the 1200 and 2000 models. In addition to these common features, the 3000 is equipped with circuit breakers and a terminal for making direct connection between the inverter and an electrical distribution panel.

FEATURES

d

b

g

 

e a

c

3000 watt series shown - Front view

g). Circuit Breakers. (3000 Watt Only). Each 110 AC outlet is equipped with a 15 amp circuit breaker.

3000 watt

 

h

 

series shown-

 

 

Back view

 

 

 

 

f

6

7

IMPORTANT INFORMATION

Important Information About Your New Whistler Inverter.

This manual will provide you with directions for the safe and efficient operation of your Whistle Power Inverter.

Important Note: Each of the following operating procedures and safety features must be carefully reviewed and thoroughly understood prior to using the inverter. Failure to do so may result in damage to the inverter or equipment or serious personal injury.

Notes:

Your Whistler inverter is designed to operate from a 12 volt power source only. Never attempt to connect your Whistler inverter to any other power source, including any AC power source.

• 110 volts can be lethal. Improper use of your Whistler inverter may result in property damage, personal injury or loss of life.

NOTE: Not recommended for use with medical equipment.

Check with the appliance manufacturer for compatibility with modified sine wave inverters.

Some appliances may not work well, not at all or be damaged. This is especially true for medical equipment.

For more information on compatibility issues, please visit our inverter FAQ page at:

www.whistlergroup.com/faq-inverters.asp

INVERTER INFORMATION

Getting Started

Power equipment and appliances which operate with motors or tubes require an initial surge of power to get them up and running. This power surge is referred to as the "starting load" or "peak load." By comparison, electrical devices such as standard light bulbs do not require a large starting load). Once the equipment or appliance has been powered up, it settles down to a slower pace and requires far less electrical power to operate. This lower power requirement is referred to as the "continuous load."

In order to ensure that the capacity of your Whistler inverter is sufficient to meet the required start up load, you must first determine the power consumption of the equipment or appliance you plan to operate.

Power consumption is rated either in wattage or in amperes, and information regarding the required "watts" or "amps" generally is stamped or printed on most appliances and equipment. If this information is not indicated on the appliance or equipment, check the owner’s manual. Contact the appliance or equipment manufacturer to determine if the device you are using (TV’s, battery re-charger, computer, etc.) is compatible with a modified sine wave.

If the power consumption is rated in amps, multiply the number of amps by 110 (AC voltage) to determine the comparable wattage rating. Induction motors may require 2 to 6 times their wattage rating to start up.

For further information on the fundamental operating principles of Whistler inverters and related technical data, see "Technical Operating Principles"

8

9

Loading...
+ 12 hidden pages