VTech 6895 User Manual

Size:
4.26 Mb
Download

STEP 1 Check package contents (mi6866)

Quick Start Guide

Make sure your phone’s packaging includes the following:

 

mi6896/6895/6870/6866

STEP 1 Check package contents (mi6896/6895)

Make sure your phone’s packaging includes the following:

Charger power adaptors (3)

Base unit

Handset

Belt clip

Base unit

Handsets (4)

Chargers (3)

Telephone line cord

Battery

Quick start guide

Telephone line cord

Belt clips (4) Batteries (4) Quick start guide

Base power adaptor Wall mount bracket

User’s manual

STEP 1 Check package contents (mi6870)

Make sure your phone’s packaging includes the following:

Charger power adaptor

Base unit

Handsets (2)

Charger

Telephone line cord

Belt clips (2) Batteries (2) Quick start guide

Base power adaptor Wall mount bracket

User’s manual

Base power adaptor

Wall mount bracket

User’s manual

STEP 2 Connect power to telephone base/ chargers

Plug the power adaptor into an electrical outlet not controlled by a wall switch, and the connector into the power jack on bottom of the telephone base/chargers.

AC power outlet

AC power outlet

NOTE:

Use only the power adaptors supplied with your VTech telephone.

STEP 3 Battery installation

1.Align the two holes in the plug with the socket pins, then snap the plug into place. Place the battery in the compartment with the wires in the upper right corner.

2.Replace cover by sliding it upwards until it clicks into place.

STEP 4 Charge the battery

1.Place the handset in the base unit/chargers.

2.Charge the battery for at least 16 hours before first use.

STEP 5 Connect to phone line

Plug one end of the telephone line cord into the telephone line jack at the bottom of the telephone base. Then plug the other

end of the cord into the wall telephone outlet.

Telephone outlet

STEP 6 Making and receiving calls

Making a call

Press

or SPEAKER and listen for dial tone.

Dial the phone number. -OR-

Dial the phone number.

Press .

Receiving a call

Press ,SPEAKERPHONE, or any dialing key except

OFF.

Hanging up

Press OFF or place the handset in its base.

STEP 7 Set the Clock

1.Press TIME/SET to listen to the current setting.

2.Press TIME/SET again to indicate changes needed.

3.Press CHANGE to change the day, hour, minute, or year.

4.When you hear the correct setting, press TIME/SET to advance to the next setting.

NOTE:

If you have caller ID service, the time will automatically be updated with the first incoming call after you program the year into the system.

STEP 8 Record your outgoing announcement

1.Press SETUP, the system announces “Announcement. Press PLAY or press RECORD. To continue setup, press

SETUP.

2.Press REC/MEMO and speak toward theMIC on the base to record an announcement for up to 90 seconds.

3.Press PLAY/STOP / ( when finished recording).

NOTE:

For complete feature instructions, please refer to your user’s manual.

IMPORTANT!

If your product is not working properly:

1.Refer to your user’s manual.

2.Visit our website at www.vtechphones.com or in Canada, www vtechcanada.com.

3.Call our customer service at 1-800-595-9511or1-800-2677377 in Canada.

96-006136-020-100