Viper VE 17DSP-EU User Manual

Size:
261.91 Kb
Download

User Manual

VE 17P-EU

VE 17HDP-EU

VE 17DSP-EU

VE 17HSP-EU

english

User Manual…………………………………………… 1-10

deutch

Betriebsanleitung……………………………………… xxx

francais

Notice d’utilisation ………………………………….… xxx

nederlands

Gebruiksaanwijzing …………………………………... xxx

italiano

Istruzioni sull´uso……………………………………… xxx

espanol

Instrucciones de manejo……………………………… xxx

portugues

Instruções de operação……………………………… xxx

Company information: www.vipercleaning.euinfo-eu@vipercleaning.com

VF72305(1) – 2009-12-22

USER MANUAL

ENGLISH

TABLE OF CONTENTS

 

INTRODUCTION ..............................................................................................................................................................

2

MANUAL PURPOSE AND CONTENTS ..........................................................................................................................................

2

TARGET...........................................................................................................................................................................................

2

HOW TO KEEP THIS MANUAL.......................................................................................................................................................

2

DECLARATION OF CONFORMITY ................................................................................................................................................

2

OTHER REFERENCE MANUALS...................................................................................................................................................

2

SPARE PARTS AND MAINTENANCE.............................................................................................................................................

2

CHANGES AND IMPROVEMENTS ................................................................................................................................................

3

OPERATION CAPABILITIES ...........................................................................................................................................................

3

CONVENTIONS ..............................................................................................................................................................................

3

UNPACKING/DELIVERY ................................................................................................................................................

3

SAFETY ..........................................................................................................................................................................

3

SYMBOLS .......................................................................................................................................................................................

3

GENERAL INSTRUCTIONS............................................................................................................................................................

4

MACHINE DESCRIPTION ..............................................................................................................................................

6

MACHINE STRUCTURE .................................................................................................................................................................

6

TECHNICAL DATA...........................................................................................................................................................................

7

WIRING DIAGRAM..........................................................................................................................................................................

8

BEFORE STARTING THE POLISHER...........................................................................................................................

9

ASSEMBLY…………….................................................................................................................................................................... 9

TRANSPORT...................................................................................................................................................................................

9

OPERATION OF POLISHER..........................................................................................................................................

9

BASIC OPERATION.......................................................................................................................................................................

9

MAINTENANCE.............................................................................................................................................................................

10

STORAGE........................................................................................................................................................................................

10

VF72309(1)2009-12

VE17P-EUVE17HDP-EUVE17DSP-EUVE17HSP-EU

1

ENGLISH

USER MANUAL

 

 

 

 

INTRODUCTION

NOTE

The numbers in brackets refer to the components shown in Machine Description chapter.

MANUAL PURPOSE AND CONTENTS

The purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safe and autonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts and disposal. Before performing any procedure on the machine, the operators and qualified technicians must read this Manual carefully. Contact VIPER in case of doubts concerning the interpretation of the instructions and for any further information.

TARGET

This Manual is intended for operators and technicians qualified to perform the machine maintenance.

The operators must not perform procedures reserved for qualified technicians. VIPER will not be answerable for damages coming from the non-observanceof this prohibition.

HOW TO KEEP THIS MANUAL

The User Manual must be kept near the machine, inside an adequate case, away from liquids and other substances that can cause damage to it.

DECLARATION OF CONFORMITY

The declaration of conformity, supplied with the machine, certifies the machine conformity with the law in force.

NOTE

Two copies of the original declaration of conformity are provided together with the machine documentation. CE-declaration is print in Quick Start Guide

IDENTIFICATION DATA

The machine model and serial number are marked on the plate .

The machine model year is written in the declaration of conformity and it is also indicated by the first two figures of the machine serial number.

This information is useful when requiring machine spare parts. Use the following table to write down the machine identification data.

MACHINE model ...............................................................................

MACHINE serial number ...................................................................

OTHER REFERENCE MANUALS

Service Manual (that can be consulted at VIPER Service Centers)

Spare Parts List (see www.vipercleaning.eu)

SPARE PARTS AND MAINTENANCE

All necessary operating, maintenance and repair procedures must be performed out by qualified personnel or by VIPER Service Centers. Only original spare parts and accessories must be used.

Contact VIPER for service or to order spare parts and accessories, specifying the machine model and serial number.

2

VE17P-EUVE17HDP-EUVE17DSP-EUVE17HSP-EU

VF72309 (1)2009-12

USER MANUAL

ENGLISH

 

 

 

 

CHANGES AND IMPROVEMENTS

VIPER constantly improves its products and reserves the right to make changes and improvements at its discretion without being obliged to apply such benefits to the machines that were previously sold.

Any change and/or addition of accessories must be approved and performed by VIPER.

OPERATION CAPABILITIES

All single-disccleaners are designed to clean and care for floor coverings inside buildings only. The cleaners are suitable for commercial use, e.g. in hotels, schools, hospitals, etc.

CONVENTIONS

Forward, backward, front, rear, left or right and up are intended with reference to the operator’s position, that is to say in working position with the handle(1).

UNPACKING/DELIVERY

To unpack the machine, carefully follow the instructions on the packing.

When the machine is delivered, check that the packing and the machine were not damaged during transportation. In case of visible damages, keep the packing and have it checked by the carrier that delivered it. Call the carrier immediately to fill in a damage claim. Check that the machine is equipped with the following features:

1.Technical documents:

SIDE-WINDINGPOLISHER User Manual

SIDE-WINDINGPOLISHER Spare Parts List

SAFETY

The following symbols indicate potentially dangerous situations. Always read this information carefully and take all necessary precautions to safeguard people and property.

The operator's cooperation is essential in order to prevent injury. No accident prevention program is effective without the total cooperation of the person responsible for the machine operation. Most of the accidents that may occur in a factory, while working or moving around, are caused by failure to comply with the simplest rules for exercising prudence. A careful and prudent operator is the best guarantee against accidents and is essential for successful completion of any prevention program.

SYMBOLS

DANGER!

It indicates a dangerous situation with risk of death for the operator.

WARNING!

It indicates a potential risk of injury for people or damage to objects.

CAUTION!

It indicates a caution related to important or useful functions.

Pay careful attention to the paragraphs marked by this symbol.

NOTE

It indicates the necessity to refer to the User Manual before performing any procedure.

VF72309 (1)2009-12

VE17P-EUVE17HDP-EUVE17DSP-EUVE17HSP-EU

3

ENGLISH

USER MANUAL

 

 

 

 

GENERAL INSTRUCTIONS

Specific warnings and cautions to inform about potential damages to people and machine are shown below.

DANGER!

Always disconnect the power supply cable when the machine is not in use, before performing maintenance procedures, before replacing the brush/pad-holderand before opening any access panel.

This machine must be used by properly trained and authorized personnel only. Children or disabled people cannot use this machine.

Do not wear jewels when working near electrical components.

Do not work under the lifted machine without supporting it with safety stands.

Do not operate the machine near toxic, dangerous, flammable and/or explosive powders, liquids or vapors.

WARNING!

The machine power supply cable is grounded and the relevant plug is grounded too. In case of machine malfunction or breakdown, grounding connection reduces the risk of electric shock.

The power supply cable plug must be connected to an appropriate outlet, which is grounded according to law in force.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

if the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Improper connection can cause electric shock. Consult a qualified technician to make sure that the outlet is properly grounded.

Do not tamper with the power supply cable plug. If the power supply cable plug cannot be connected to the outlet, have new grounded outlet installed by a qualified technician, according to the law in force.

Before connecting the power supply cable to the electrical mains, check that frequency and voltage, shown on the machine serial number plate, match the electrical mains voltage.

Regularly check the power supply cable for damages, cracks, cuts, etc. If the power supply cable is damaged, replace it immediately.

To avoid any risk, if the power supply cable is damaged, contact VIPER Service Center or a qualified technician.

Do not pull or carry the machine by the power supply cable and never use the power supply cable as a handle. Do not close a door on the power supply cable, or pull the power supply cable around sharp edges or corners. Do not run the machine on the power supply cable.

Keep the power supply cable away from heated surfaces.

To reduce the risk of fire, electric shock, or injury, do not leave the machine unattended when it is plugged in. Disconnect the machine from the electrical mains when not in use and before performing maintenance procedures.

To avoid electric shock, do not expose the machine to rain or other bad weather conditions. Store the machine indoors, in a dry place.

Do not allow to be used as a toy. Close attention is necessary when used near children.

Use only as shown in this Manual. Use only VIPER's recommended accessories.

Take all necessary precautions to prevent hair, jewels and loose clothes from being caught by the machine moving parts.

Do not leave the machine unattended without being sure that it cannot move independently.

Do not use the machine in particularly dusty areas.

While using this machine, take care not to cause damage to people or objects.

Do not bump into shelves or scaffoldings, especially where there is a risk of falling objects.

Do not put any can containing fluids on the machine.

The machine working temperature must be between 0°C and +40°C.

The machine storage temperature must be between 0°C and +40°C.

VIPER machines can be used in combination with standard detergents which can not damage any materials of VIPER machines (no use of solvents or other aggressive liquid materials). VIPER will not pay any claims regarding using aggressive detergents in VIPER machines. If you need a special detergent for cleaning purposes, please contact your VIPER dealer.

4

VE17P-EUVE17HDP-EUVE17DSP-EUVE17HSP-EU

VF723091)2009-12

USER MANUAL

ENGLISH

 

 

 

 

The humidity must be between 30% and 95%.

Do not use the machine as a means of transport.

Do not use the machine on slopes with a gradient exceeding the specifications.

Do not allow the brush/pad to operate while the machine is stationary to avoid damaging the floor.

In case of fire, use a powder fire extinguisher, not a water one.

Do not tamper with the machine safety guards and follow the ordinary maintenance instructions scrupulously.

Do not allow any object to enter into the openings. Do not use the machine if the openings are clogged. Always keep the openings free from dust, hairs and any other foreign material which could reduce the air flow.

Do not remove or modify the plates affixed to the machine.

If the machine is used according to the instructions, the vibrations are not dangerous. The machine vibration level is less than 2.5 m/s2 (98/37/EEC-EN1033/1995).

This machine cannot be used on roads or public streets.

Pay attention during machine transportation when temperature is below freezing point. The water in the recovery tank or in the hoses could freeze and seriously damage the machine.

Use brushes and pads supplied with the machine and those specified in the User Manual. Using other brushes or pads could reduce safety.

In case of machine malfunctions, ensure that these are not due to lack of maintenance. If necessary, request assistance from the authorized personnel or from an authorized VIPER Service Center.

If the machine

does not work properly

is damaged

has water or foam leaks

has been left outdoors exposed to bad weather conditions

is wet or has been dropped into water

turn it off immediately and contact VIPER Service Center or a qualified technician.

If parts must be replaced, require ORIGINAL spare parts from an authorized VIPER Dealer or Retailer.

To ensure machine proper and safe operation, the scheduled maintenance shown in the relevant chapter of this manual must be performed by the authorized personnel or by an authorized VIPER Service Center.

Carefully read all the instructions before performing any maintenance/repair procedure.

Do not wash the machine with direct or pressurized water jets, or with corrosive substances.

The machine must be disposed of properly, because of the presence of toxic-harmfulmaterials (batteries, electrical components, etc.), which are subject to standards that require disposal in special centers (see Scrapping chapter).

Caution: This appliance is not suitable for picking up hazardous dust.

Caution: This appliance is for dry use only and is not to be used or stored outdoors in wet conditions

WARNING: Only use the brushes provided with the appliance or those specified in the instructiton manual. The use of other brushes may impair safety.

The plug is to be removed from the socket-outletwhen its power source during cleaning or maintenance and when replacing parts or converting the appliance to another function

Do not allow the rotating brushes to come into contact with the supply Cord.

The A-weightedsound pressure level LPA in dB(A) < 85 dB (A) emitted by the appliance.

This appliance is suitable for commercial use, for example in hotels, schools, hospitals, factories, shops, offices and rental businesses.

VF72309 (1)2009-12

E17P-EUVE17HDP-EUVE17DSP-EUVE17HSP-EU

5

ENGLISH

USER MANUAL

 

 

 

 

MACHINE DESCRIPTION

MACHINE STRUCTURE

1.Guide Handle

2.Switch Lever, Right

3.Adjustment Lever

4.Shaft

5.Cord Wrap

6.Switch Plug (VE17P-EUVE17HDP-

EU VE17HSP-EU),Switch(H/L speed)

(VE17DSP-EU)

7.Wheel

8.Barb Hose

9.Bumper

16

10.Mainframe

11.Motor Cover

12.Power Cord

13.Strain Relief

14.Lever Solution

15.Switch Lever, Left

16.Button interlock

17.Pad Driver

18.Pad

19.Brush

20.Solution tank assembly

1

15

20

 

14

 

2

13

 

 

 

3

 

 

4

5 12

6

11

7

8

10

 

9

18

17

 

 

19

6

VE17P-EUVE17HDP-EUVE17DSP-EUVE17HSP-EU

VF72309 (1)2009-12

 

 

 

 

USER MANUAL

 

ENGLISH

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TECHNICAL DATA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Model

VE17P-EU

VE17HDP-EU

VE17DSP-EU

VE17HSP-EU

 

 

 

 

 

 

 

 

 

Voltage

220 – 240 V

220 – 240 V

220 – 240 V

220 – 240 V

 

 

Power

750 W

1120 W

1125 W/1500 W

1500 W

 

 

 

 

 

 

 

 

 

Current

4.6 A

7 A

7.2 A/9.5 A

9.8 A

 

 

 

 

 

 

 

 

 

Frequency

50-60Hz

50-60Hz

50-60Hz

50-60Hz

 

 

Brush Speed

150 rpm

150 rpm

150 / 300 rpm

300 rpm

 

 

 

 

 

 

 

 

 

Brush Diameter

43.2 cm

43.2 cm

43.2 cm

43.2 cm

 

 

Dimension LXWXH

53.6x43.2x121.9 cm

53.6x 43.2x121.9cm

53.6 x43.2x121.9 cm

53.6x43.2x121.9 cm

 

 

 

 

 

 

 

 

 

Weight

43 kg

45 kg

46 kg

45 kg

 

 

Length of Power cord

15m

15 m

15 m

15 m

 

 

 

 

 

 

 

 

 

 

 

 

VF72309 (1)2009-12

VE17P-EUVE17HDP-EUVE17DSP-EUVE17HSP-EU

7

ENGLISH

USER MANUAL

 

 

 

 

WIRING DIAGRAM FOR VE17P-EUVE17HDP-EUVE17HSP-EU

Motor

WIRING DIAGRAM FOR VE17DSP-EU

Motor

8

VE17P-EUVE17HDP-EUVE17DSP-EUVE17HSP-EU

VF72309 (1)2009-12

USER MANUAL

ENGLISH

 

 

 

 

BEFORE STARTING THE MACHINE

ASSEMBLY

For transport reasons the motor head and shaft are supplied not assembled.

1

1] Insert the gear index housing (1) into the “U” shape bracket (2).

 

 

2

2] Align the holes of the gear index housing and the “U” shape bracket.

3]Insert the socket screws into the holes of the “U” shape bracket and then tighten the screws.

4] Wind the power cord around the handle and the power cord hook.

TRANSPORT

1] Place the handle in the upright position, Grasp the handle with both hands and tip the cleaner until it stands on the two wheels (1).

2] Wheel the cleaner to where it is needed.

1

OPERATION OF THE MACHINE

BASIC OPERATION

 

 

 

 

 

 

 

 

 

 

 

 

1] Remove any obstructions or other obstacles in the area which is to be

 

 

 

 

 

 

 

 

 

 

 

 

cleaned.

 

 

 

 

 

 

 

 

 

 

 

 

 

2] Place the handle in the upright position and tilt machine back until handle

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

rests on the floor.

 

 

 

 

 

 

 

 

 

 

 

 

 

*Be sure the machine is not plugged into an outlet.

 

 

 

 

 

 

 

 

 

 

 

 

 

3] Attach the pad driver or brush to the machine by placing the clutch plate

 

 

 

 

 

 

 

 

 

 

 

 

over the gearbox hub and turning the driver / brush 1/4 turn.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4] Place machine back into its upright position.

 

 

 

 

 

 

 

 

 

 

 

 

 

5] Plug power cord into a grounded outlet.

 

 

 

 

 

 

 

 

 

 

 

 

 

*Never use an extension cord in conjunction with the standard power

 

 

 

 

 

 

 

 

 

 

 

 

cord.

 

 

 

 

 

 

6] The handle height may be adjusted by pulling the adjustment lever (1) and

 

 

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

lower the shaft (2) into its cleaning position.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7] To start the machine, press the red safety button(3) on the top of the upper

 

 

 

 

 

 

 

 

 

 

switch housing ,and then squeeze either of the operating triggers(4/5) the

 

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

 

safety button (3) must be depressed prior to squeezing

the operating

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

 

 

 

 

triggers (4/5).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VF72309 (1)2009-12

VE17P-EUVE17HDP-EUVE17DSP-EUVE17HSP-EU

 

9

ENGLISH

USER MANUAL

 

 

 

 

1

MAINTENANCE

8] Select either low speed {150 rpm} or high speed {300 rpm} by pushing the motor mounted switch (1) into the low or high position.(Only for VE17DS) *Never change the speed while operating the machine. Be sure the power is turned off prior to changing the speed.

9] When the machine is in operation, both hands should be placed on the switch housing {upper handle}.

10] During operation, to make the machine go right, gently raise the handle. To make the machine go left, gently lower the handle.

11] To stop the machine at any time, simply release the operating trigger and the machine will stop automatically.

12] Unplug machine as soon as you are not using it. 13] Tilt machine back and remove pad driver or brush.

14] Roll the power cord around the handle and the power cord hook.

To keep the machine performing well for many years, please follow the following maintenance procedures.

* Always confirm that the machine is unplugged prior to performing any maintenance or repairs. *Never store a low speed machine with the pad driver or brush mounted to the machine.

1] Clean the outside of the machine with a mild cleaner.

2] Check power cord for any damage. If damage is detected, replace power cord immediately. 3] Lubricate wheels with a water resistant lubricant once a month.

4] Check machine for loose or missing nuts and bolts, and replace as necessary.

5] If the machine is used in a dusty environment, you may remove the motor cover and blow the motor, clean with compressed air. This will ensure proper ventilation, and allow the motor to run cooler.

STORAGE

1] Unplug machine from power source. 2] Store in upright position in a dry area.

Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.

10

VE17P-EUVE17HDP-EUVE17DSP-EUVE17HSP-EU

VF72309 (1)2009-12