VT3210LED/VT4210LED
LED TV
- User Guide
- Guide de l’utilisateur
- Guida dell’utente
Model No. : VS13772-1M
VS13776-1M
Contents |
|
|
Compliance Information....................................................................................... |
|
i |
Declaration of RoHS Compliance....................................................................... |
|
ii |
Copyright Information........................................................................................ |
|
iii |
Product Registration.......................................................................................... |
|
iii |
TV Wall Mount..................................................................................................... |
|
iv |
Safety Instructions............................................................................................. |
|
iv |
Wet Location....................................................................................................... |
|
iv |
Outdoor Use........................................................................................................ |
|
iv |
Disconnect Device - The Mains Plug or An Appliance Coupler..................... |
iv |
|
WARNING............................................................................................................. |
|
v |
USE...................................................................................................................... |
|
vi |
Important Safety Instructions............................................................................ |
|
vi |
List of Features.................................................................................................. |
|
10 |
Package Contents.............................................................................................. |
|
10 |
Installing the LED TV......................................................................................... |
|
11 |
Disconnecting the stand......................................................................................... |
|
11 |
Installing the stand.................................................................................................. |
|
11 |
Mounting ViewSonic LED TV to the wall................................................................ |
|
12 |
Wall Mount Kit Specifications (VESA).................................................................... |
|
13 |
Front and side View................................................................................................ |
|
14 |
Rear View............................................................................................................... |
|
15 |
Connecting the LED TV..................................................................................... |
|
17 |
Cable System or VHF/UHF Antenna System......................................................... |
|
17 |
Cable System and VHF/UHF Antenna System....................................................... |
|
17 |
HD Cable Box/HD Satellite Box.............................................................................. |
|
18 |
Personal Computer................................................................................................. |
|
19 |
Digital audio system................................................................................................ |
|
19 |
Other Equipments................................................................................................... |
|
20 |
Acceptable signal formats for VGA IN and HDMI terminals.................................... |
|
21 |
Remote Control and TV Controls..................................................................... |
|
22 |
Inserting Remote Control Batteries......................................................................... |
|
22 |
Remote Control and TV Controls............................................................................ |
|
23 |
Operation............................................................................................................ |
|
24 |
Turning the TV On and Off...................................................................................... |
|
24 |
Changing Channels................................................................................................ |
|
24 |
Adjusting the Volume.............................................................................................. |
|
24 |
Viewing the Source Information.............................................................................. |
|
24 |
Automatic Power Down.......................................................................................... |
|
24 |
ViewSonic |
VT3210LED/VT4210LED |
|
ENGLISH
ENGLISH
No Signal Power Down........................................................................................... |
24 |
Using the OSD Menu.............................................................................................. |
25 |
Customizing the Picture Settings............................................................................ |
25 |
Customizing the Audio Settings.............................................................................. |
27 |
Customizing the Preferences Settings.................................................................... |
29 |
Customizing the Locks Settings.............................................................................. |
30 |
Customizing the Setup Settings.............................................................................. |
32 |
Cleaning the LED TV......................................................................................... |
34 |
Disclaimer............................................................................................................... |
34 |
Troubleshooting................................................................................................. |
35 |
Specifications.................................................................................................... |
38 |
Limited Warranty................................................................................................ |
41 |
Mexico Limited Warranty.................................................................................. |
42 |
ViewSonic |
VT3210LED/VT4210LED |
Compliance Information
FCC Statement
This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Warning: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
Following information is only for EU-member states:
The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste, but use the return and collection systems according to local law.
If the batteries, accumulators and button cells included with this equipment, display the chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of more than 0.0005% Mercury or more than, 0.002% Cadmium, or more than 0.004% Lead.
ENERGY STAR Information:
To ensure your television is operating at optimal energy efficiency, select [Home] mode during initial activation.
To return to [Home] mode settings, select [Standard] picture mode. [Standard] mode is recommended for normal home use.
Keeping the TV at its factory default settings that meet ENERGY STAR criteria.
Enabling certain features and functionality of LED TV will increase its energy consumption, possibly beyond the limits required for ENERGY STAR qualification.
ENGLISH
ViewSonic |
i |
VT3210LED/VT4210LED |
ENGLISH
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European ParliamentandtheCouncilonrestrictionoftheuseofcertainhazardoussubstancesinelectricalandelectronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below:
Substance |
Proposed Maximum |
Actual Concentration |
|
Concentration |
|||
|
|
||
|
|
|
|
Lead (Pb) |
0.1% |
< 0.1% |
|
|
|
|
|
Mercury (Hg) |
0.1% |
< 0.1% |
|
|
|
|
|
Cadmium (Cd) |
0.01% |
< 0.01% |
|
|
|
|
|
Hexavalent Chromium (Cr6+) |
0.1% |
< 0.1% |
|
Polybrominated biphenyls (PBB) |
0.1% |
< 0.1% |
|
|
|
|
|
Polybrominated diphenyl ethers (PBDE) |
0.1% |
< 0.1% |
|
|
|
|
Certain components of products as stated above are exempted under the Annex of the RoHS Directives as noted below:
Examples of exempted components are:
1.Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically mentioned in the Annex of RoHS Directive.
2.Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic ceramic parts (e.g. piezoelectronic devices).
3.Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).
4.Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.
ViewSonic |
ii |
VT3210LED/VT4210LED |
Copyright Information
Copyright © ViewSonic® Corporation, 2010. All rights reserved.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation.
ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency (EPA).
As an ENERGY STAR® partner, ViewSonic Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein;norforincidentalorconsequentialdamagesresultingfromfurnishingthismaterial,ortheperformance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change product specifications without notice. Information in this document may change without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from ViewSonic Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes available, please register your product on the Internet at: www.viewsonic.com.
For Your Records
Product Name: VT3210LED/VT4210LED ViewSonic LED TV
Model Number: VS13772 (VT3210LED-1M) /VS13776 (VT4210LED-1M) Document Number: VT3210LED-1M_UG_ENG Rev. 1A 10-04-10
VT4210LED-1M_UG_ENG Rev. 1A 10-04-10 Serial Number: _________________________________
Purchase Date: _________________________________
Product disposal at end of product life
ViewSonic respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit ViewSonic website to learn more.
USA & Canada: http://www.viewsonic.com/company/green/recycle-program/ Europe: http://www.viewsoniceurope.com/uk/support/recycling-information/ Taiwan: http://recycle.epa.gov.tw/recycle/index2.aspx
ENGLISH
ViewSonic |
iii |
VT3210LED/VT4210LED |
ENGLISH
TV Wall Mount
To find the perfect mount for VT3210LED / VT4210LED, please browse www.viewsonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775.
Safety Instructions
The symbol is intended to alert the user to presence of un-insulated “Hazardous Voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user that improper use of the product may result in product malfunction. The user should pay attention to avoid accidents or unnecessary problems.
Wet Location
Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
Outdoor Use
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Disconnect Device - The Mains Plug or An Appliance Coupler
The mains plug or an appliance coupler is used as the disconnect device for disconnection from the mains, the disconnect device shall remain readily operable.
ViewSonic |
iv |
VT3210LED/VT4210LED |
WARNING
Do not expose this TV to rain or moisture. It may increase the risk to fire or electronic shock.
Dangerous Voltage:
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of dangerous voltage within the inside of the product that may be sufficient level to constitute a risk of electric shock to persons.
Instruction: The
exclamation point within
an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance.
The TV shall not be exposed to dripping or splashing. Do not put objects filled
with liquids, such as vases, on the TV.
CAUTION
To prevent electric shock, do not use this polarized AC plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.
Declaration of Conformity
Trade Name: ViewSonic Model: VT3210LED / VT4210LED Responsible Party: ViewSonic Corporation Address: 381 Brea Canyon Road, Walnut, CA. 91789 USA Telephone Number: 1-800-688- 6688 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTIFICATION
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the device and receiver.
•Connect the device into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Pursuant to FCC regulations, be cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
SAFETY
•Operate the TV on 120V AC only.
•Use the AC power cord specified by ViewSonic and suitable for the voltage where you use it.
•The plug is designed, for safety purposes, to fit into the wall outlet only one way.
•If you are unable to insert the plug fully into the outlet, contact your dealer.
•If any liquid or solid object should fall inside the cabinet, stop operating, unplug the TV immediately and have it checked by qualified service technician.
•If you will not be using the TV for a long time, disconnect the power by pulling the plug itself. Do not pull on the cord.
•For details concerning safety precautions, refer to Important Safety instructions on page 3.
Installation
•The TV should be installed near an easily accessible power outlet.
•To prevent internal heat buildup, do not block the ventilation openings.
•Do not install the TV in a hot or humid place, or in a place subject to excessive dust or mechanical vibration.
•Avoid operating the TV at temperatures below 41ºF (5ºC).
•When the TV is transported directly from a cold to a warm location, or if the room temperature changes suddenly, the picture may be blurred or show poor color due to moisture
condensation. In this case, please wait a few hours before turning on the TV, in order to let the moisture evaporate first.
•To ensure best picture quality, do not expose the screen to direct illumination or sunlight. We recommend you use spot lighting directed down from the ceiling or to cover the windows that face the screen with opaque curtains. It is better that TV is installed where the floor and walls are not of a reflective material.
TO CUSTOMERS
To install the specified TV, sufficient expertise is required. Make sure you subcontract the installation to ViewSonic dealer or licensed contractors and
pay adequate attention to safety during the installation.
Note
This television includes a QAM demodulator, which should allow you to receive unscrambled digital cable television programming via subscription service to a cable service provider.
The type of programming and signal provided by your cable service provider will affect the availability of digital cable
television programming in your area.
TRADEMARK
INFORMATION
•Macintosh is a trademark of Apple Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
•HDMI, the HDMI logo and HighDefinition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
ENGLISH
ViewSonic |
v |
VT3210LED/VT4210LED |
ENGLISH
•This production contains Bitstream Vera Sans fonts under the following copyright.
Copyright © 2003 by Bitstream, Inc. All Rights Reserved. Bitstream Vera is a trademark of Bitstream, Inc.
IMPORTANT SAFETY
INSTRUCTIONS
1.Read these instructions completely before using the equipment.
2.Keep these instructions in a safe place.
3.Heed all warnings.
4.Follow all instructions.
5.Do not use this apparatus near water.
6.Clean with a soft, dry cloth.
7.Do not block any ventilation openings.
Install the equipment in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat.
9.Do not attempt to circumvent the safety provisions of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade and the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the outlet.
10.Prevent the power cord from being tread upon or pinched, particularly at the plug, convenience receptacles, and the point where they exit from the device. Be sure that the power outlet is located near the equipment so that it is easily accessible.
11.Only use attachments/ accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
13.Unplug this apparatus when it will be unused for a long period of time.
14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, or the unit does not operate normally, or has been dropped.
USE
AC power Cord
Keep the following guidelines to protect the AC power cord from being damaged. If the AC power cord is damaged, it may result in a fire or an electric shock. Stop using it and ask your dealer or ViewSonic service center to exchange it.
•Do not place the TV where the power cord is subject to wear or abuse.
•Do not pinch, bend, or twist the cord excessively.
•The core lines may be bared and cut, causing a short-circuit,
and resulting in a fire or an electric shock.
• Do not convert or damage the power cord.
• Avoid power cord being rolled over or rested upon.
•When the power cord is plugged in, do not move the TV.
•Keep the power cord away from heat sources.
•When you disconnect the AC power cord, disconnect it from the wall outlet first.
•When disconnecting the power cord, grasp the plug instead of pulling the power cord.
•Use only an original ViewSonic AC power cord, not other brands.
•Do not use the supplied AC power cord on any other equipment.
Wall outlet
Insert the plug fully into the outlet. If it is loose, do not use it. Doing so may cause arcing and
result in a fire. Contact your electrician to change the outlet.
Wiring
For your safety, be sure to unplug the AC power cord when connecting cables.
Take care not to trip on the cables. It may cause damage to the TV set.
Electric shock
Do not touch the AC power cord or the TV with a 
wet hand. If you plug/unplug the AC power cord 
from the TV with a wet hand, it may cause electric 
shock.
Lightning storms
During a lightning storm, unplug the TV from the wall outlet and disconnect the antenna to prevent damage to the TV.
When not in use
If you will not be using the TV set for long periods of time, the TV set should be disconnected from the AC power outlet to prevent power line surges. The TV set is not disconnected from the AC power source when the TV set is switched off.
To disconnect the TV set completely, unplug from the AC power outlet.
Overloading
This TV set is designed to operate on a 120V 
AC supply only. If there are too many appliances 
connected to the same AC power outlet, it could 
result in a fire or an electric shock. 
Optional equipment
If optional equipment is to be installed, leave some space between optional equipment and the TV set. Picture distortion and/or noisy sound may occur if the TV set is positioned in close proximity to any equipment emitting electromagnetic radiation.
Small accessories
Keep small accessories in a safe place where children are unable to reach.
ViewSonic |
vi |
VT3210LED/VT4210LED |
ANTENNAS
Outdoor antenna grounding
If an outdoor antenna is installed, follow the precautions below. Do not install the outdoor antenna system near of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits.
WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM, EXTREME CARE SHOULD BE TAKEN TO KEEP FROM CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT WITH THEM IS ALMOST INVARIABLY FATAL. Be sure the antenna system is grounded so that it can provide some protection against voltage surges and built-up static charges.
Section 810 of the National Electrical Code (NEC) in the U.S.A. and Section 54 of the Canadian Electrical Code in Canada provides information with in regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
Antenna grounding according to the National Electrical Code, ANS/NFPA 70
|
|
|
|
|
|
Antenna |
|
|
Ground clam |
|
|
|
discharge |
||||
|
|
|
||||||
Electric service |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
equipmen |
|
|
|
|
|
|
|
|
Ground clamps |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Grounding conductors |
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
||
|
Power service grounding |
|
||||||
|
electrode system |
|
||||||
Batteries
•Do not cast away batteries in a fire.
•Do not disassembled, overheat, or short-circuit the batteries.
•If the battery is replaced in the wrong way, it may cause danger of explosion. Replace only with the same or equivalent type.
•Batteries must not be exposed to excessive heat such as sunshine, fire or the like.
Dispose used batteries
To preserve our environment, dispose of used batteries according to your local laws or regulations.
CLEANING
Cleaning the AC power plug
Unplug the AC power plug and clean it 
regularly. If the plug is covered with dust and gathers moisture, its insulation may deteriorate 
and result in a fire.
Cleaning the screen surface/ cabinet of the TV set
When cleaning this TV, unplug the AC power 
cord. If not, it may result in electric shock. Use
a dry soft cloth to clean the cabinet of the TV. To remove dust near the screen, wipe it gently with a soft cloth. Stubborn stains
may be removed with a cloth slightly dampened with a solution of mild soap and warm water. Never use strong solvents such as thinner or benzine for cleaning. If using a chemically pretreated cloth, please follow the instruction provided on the package. The ventilation holes can accumulate dust over time.
To ensure proper ventilation, we recommend you to remove the dust periodically (once a month) using a vacuum cleaner, while the LED TV is powered off.
MAGNETIC INFLUENCE
This TV contains a strong magnet in the speaker unit that generates a magnetic field. Keep any items susceptible to magnetic fields away from the speaker.
SOUND
If you hear snapping or popping sound comes from the TV continuously or frequently while the TV is
operating, 
unplug the TV and consult your dealer or service 
technician. It is normal for some TVs to make occasional snapping or popping sounds, particularly when being turned on or off.
CARRYING THE TV Carry the TV as instructed
To prevent dropping the TV and causing serious injury, you must follow these guidelines:
•Disconnect all cables before carrying the TV.
•Carrying the large size TV requires at least two or three people.
•When you carry the TV, place your hands as illustrated and hold it securely. Do not put stress on the LCD panel and the frame around the screen.
•When carrying the TV, do not subject it to shocks, vibration, or excessive force.
•When lifting or moving the TV, hold it securely from the bottom. Place your palm directly under the panel.
VENTILATION
Slots and openings in TV are provided for ventilation. To ensure reliable operation of the TV and to protect it from overheating, be sure these openings are not blocked or covered. The TV may accumulate dust and get dirty if proper ventilation is not provided. For proper ventilation, follow the following guidelines:
• Never install the TV face up, down or sideways.
• Never install the TV turned over or upside down.
• Never cover the slots and openings with a
ENGLISH
ViewSonic |
vii |
VT3210LED/VT4210LED |
ENGLISH
cloth or other materials.
•Never block the slots and openings by placing the TV on a bed, sofa, rug or other similar surface.
•Never place the TV in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided.
Leave some space around the TV set as shown below. Otherwise, air-circulation may be inadequate and cause overheating, which may cause a fire or damage to the TV set.
Installed on the wall
11.875 inches
(30.16 cm)
4 inches |
|
|
|
|
|
4 inches |
||||
|
|
|
|
|
||||||
(10 cm) |
|
|
|
|
|
(10 cm) |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 inches
(10 cm)
Installed with stand
11.875 inches
(30.16 cm)
4 inches |
|
|
|
|
|
|
4 inches |
|
|
|
|
|
2.375 inches |
|||
|
|
|
|
|
|
|
|
|
||||||||
(10 cm) |
|
|
|
|
|
|
(10 cm) |
|
|
|
(6.03 cm) |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Leave at least this space around the set. Do not install the TV set as follows:
Air circulation is blocked. |
Air circulation is blocked. |
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Objects and ventilation holes
Never push any objects into the slots on the TV cabinet as they may touch dangerous voltage points or short out parts that could result in a fire or an electric shock. Do not place any objects on
the TV.
MOISTURE
Moisture and flammable objects
• Keep the product away from moisture. Do not expose this appliance to rain or moisture. Do not
place objects filled with liquids, such as vases, on
the TV.
• Do not use power-line operated V sets near water, such as in places like a bathtub, washbowl, kitchen sink, laundry tub, a wet basement, or near a
swimming pool, etc. It may cause fire or electric shock.
•Do not let this TV get wet. Never spill liquid of any kind on the TV. If water penetrates into the product, unplug the power cord and contact ViewSonic.
•Do not operate the TV when wet. It may result in electric shock or damage to the TV.
•To prevent fire, keep flammable objects or open flame (e.g. candles) away from the TV.
INSTALLATION
To do Wall mount installation, you need a Wall-Mount Bracket. When installing or removing the TV using the Wall-Mount Bracket, be sure to use qualified contractors. If not properly secured during installation or removal from the Wall-Mount Bracket, the TV may fall and cause serious injury.
Optional wall mount
•When installing the TV using a Wall-Mount Bracket, make sure you follow the operating instructions supplied with the Wall-Mount Bracket.
•Attach the brackets supplied with the Wall-Mount Bracket.
•The TV is not designed for hanging from the ceiling. It may fall and cause serious injury.
Placement
The TV should be installed near an easily accessible AC power outlet.
Observe the following to prevent the TV from falling from the stand or wall mount.
•Place the TV on a stable, level surface.
•Do not hang anything on the TV. Do not allow children to climb on the TV.
• Do not install the TV in places subject to extreme temperature, such as in direct
sunlight, near a radiator, or heating vent. If the TV is exposed to extreme temperature, the TV may overheat and cause deformation of the enclosure or cause malfunction.
•Do not install the TV in a place exposed to direct air conditioning.
•If the TV is installed in such a location, moisture may condense inside and may cause a malfunction.
•Do not place the TV in hot, oily, humid or
excessively dusty places.
• Do not install the TV where insects may enter.
•Do not install the TV where it may be exposed to mechanical vibration.
•Do not install the TV in a location where it may spear up, such as on or behind a pillar, or where you might bump your head on it. It may cause injury.
Preventing the TV from toppling over
To prevent the TV from toppling over, secure the TV to a wall or stand.
Placement for watching
We suggest you to watch the TV at a distance of 3-7 times that of the screen height, and not in excessive brightness. It is easy to cause eye fatigue if you watch TV for too long or in a dark room. To obtain clear picture, do not expose the screen to direct illumination or sunlight. Use spot lighting directed down from the ceiling if you can.
ViewSonic |
viii |
VT3210LED/VT4210LED |
Use in outdoor
This TV is not designed for outdoors installation. Do not expose the TV to rain, as it may result in a fire or an electric shock.
Also, do not expose the TV to direct sunlight, as it may heat up and become damaged.
Vehicle, ships and other vessels
Do not install this TV in a vehicle. 
Car accidents may cause the TV to fall down and 
cause injury. Do not install this TV in a ship or vessel.
If the TV is exposed to seawater, it may cause a fire or damage the TV.
Medical institutions
Do not place this TV in a place where medical equipment is in use. It may cause the medical equipment to malfunction.
VOLUME ADJUSTMENT
•Adjust the volume to avoid disturbing your neighbors. Sound carries easily at night. Therefore, we suggest you close the windows or use headphones.
•When using headphones, adjust the volume to appropriate levels, or hearing damage may result.
LCD SCREEN
•Although the LCD screen is made with high precision technology and has effective pixels of 99.99% or more, black dots or bright points or light (red, blue, or green) may appear constantly on the LCD screen. This is a structural property of the LCD panel and is not a malfunction.
•The LCD screen is made with high-precision technology. To achieve a high level of performance and picture quality, this TV’s backlight setting is set to maximize the brightness of the TV. However, uneven brightness may be observed when the LED TV is viewed in a dark environment without an input source or a blank screen. This is a normal condition, not a malfunction of the TV. To improve this condition, change the Picture mode, Backlight setting, enable the Light Sensor, or turn on the Power management.
•Avoid exposing the LCD screen surface to direct sunlight. It is likely to damage the LCD panel.
•Do not push or scratch the LCD screen, or place objects on top of the TV. The image may be uneven or the LCD panel may be damaged.
•If the TV is used in a cold place, a smear may occur in the picture or the picture may become dark. It is not caused by a failure. This condition will improve as the temperature rises.
•When still pictures are displayed continuously, ghosting may occur. It should disappear after a short period of time.
•The screen and cabinet get warm when the TV is in use. This is a normal condition.
•Spraying insect repellent with volatile material on the screen will cause damage.
•Do not make prolonged contact with rubber or plastic material.
Broken pieces
Do not throw anything at the TV.
Doing so may break the screen glass and cause serious injury.
If the surface of the TV cracks, unplug the AC
power cord before touching the TV. Otherwise electric shock may result.
Handling of broken glass and liquid crystal leakage
If the LCD panel gets damaged, crystalline liquid leakage may occur, or scattered broken glass may result. Do not touch broken glass or crystalline liquid which is toxic, with bare hands as cuts, poisoning or skin irritation may occur. Also do not glass fragments or leaked crystalline liquid get into your eyes or mouth. Should either contacted your eyes or mouth, rinse the contacted area thoroughly with water and consult your doctor.
SERVICING
Do not attempt to repair the TV yourself,
since opening the cabinet may expose you to dangerous voltage or other hazards. Ask qualified service personnel to do the servicing
for your TV.
Replacement parts
When replacement parts are required, be sure the service technician certifies in writing that he/she has used replacement parts specified by the manufacturer that have the same characteristics as the original parts. Unauthorized substitutions may cause a fire, an electric shock or other hazards.
Safety check
Upon completion of repairs to the TV, ask the service technician to perform routine safety checks (as specified by the manufacturer) to determine that the TV is safe for operating, and to so certify.
Ask a qualified service technician to dispose of the TV.
For Customers in the United States
There is mercury in the lamp of this product. Disposal of these materials may be regulated due to
environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (http//www.eiae.org).
ENGLISH
ViewSonic |
ix |
VT3210LED/VT4210LED |
Getting Started
List of Features
1.Enjoy HDTV with 1366 x 768 (32’’), 1920 x 1080 (42’’) native image resolution.
2.Built-in digital tuners (HDTV, NTSC, Clear QAM-digital cable).
3.Multiple video/computer inputs: HDMI (x2), VGA, one set of YPbPr (Component)/Video (Composite) input (Includes standard A/V connections. These are switched by AV input mode (see page 29).)
4.Digital Audio Out optical audio connection with Dolby® Digital optical output format.
5.HDMI-CEC allows control of external devices from the TV remote via HDMI connection. (see page 33).
6.Media Player allows you to view photo files. (see page 33).
7.Powerful 10W + 10W speakers.
Package Contents
Check the contents of your package. It should contain:
ENGLISH
LED TV
ViewSonic©
VT3210LED
VT4210LED
LED TV
User Guide
Guide de líutilisateur
GuÌa del usuario
IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http:// www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website. “Before operating the equipment, read the
instructions in this manual carefully.”
ViewSonic User Guide
CV-90283T
Remote Control with batteries
|
|
|
|
1 ViewSonic® LED TV - The Door to High Definition |
||
|
VT3210LED |
Welcome to high definition entertainment ViewSonic LED TVs bring you a |
||||
|
whole new Full HD Experience |
|
||||
|
VT4210LED |
Before you start using your new ViewSonic LED TV, please read this Quick |
||||
|
Start Guide This guide will explain how to get great performance from your |
|||||
|
LED TV |
new high definition TV |
|
|||
Quick Start Guide |
Step 1: Register online at: http://ww |
ViewSonic.com/support |
||||
|
|
|
|
Step 2: Check your accessory contents in package |
||
|
|
|
|
Step 3: Install 2 AAA batteries (included in package) in your remote control |
||
|
|
|
|
Step 4: Install your TV If you want to mount the TV on the wall, please refer |
||
|
|
|
|
the User Guide for detailed instructions |
||
|
|
|
|
Enjoy Full HD Experience: |
|
|
|
|
For Your Convenience |
|
|
||
|
Write down your product serial numbe . |
|
Set up your ViewSonic LED TV by using proper connections to an HD content |
|||
|
|
source such as your HD cable or satellite box. |
||||
|
If you need any assistance, it will help you |
|
This TV is optimized fo HDTV |
|
||
|
Please contact ViewSonic service team directly if you have ques- |
|
Please enjoy HDTV with HD p ogramming. |
|||
|
tions on the use of your television |
|
|
|
||
|
Contact ViewSonic Service Team at |
|
Sou |
Comments & Quality |
||
|
http://ww ViewSonic.com |
|
HD Ove -The-Air Antenna (ATSC) |
Aspect ratio 16:9 |
||
|
Or call our service team: |
|
HD Cable Subscription/Programming |
|||
|
United States |
1-800-688-6688 |
|
HD Satellite Subscription |
Best picture quality |
|
|
Canada |
1-866-463-4775 |
|
HD/Blue-ray DVD Player |
|
|
|
Please Do Not Return this P oduct to the Sto |
|
Ove -The-Air Antenna (ATSC) |
Digital Content |
||
|
|
Cable Subscription/Programming |
Aspect Ratio base on program |
|||
|
|
|
|
Satellite Subscription |
Good picture quality |
|
For further information, please refer to the User Guide supplied with the TV |
DVD Player |
|
||||
Ove -The-Air Antenna (NTSC) |
Analog Content |
|||||
Please keep this Quick Start Guide for your future reference |
||||||
|
|
|
|
Cable Programming |
Original TV aspect ratio 4:3 |
|
|
|
|
|
|
Normal picture quality |
|
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic Quick Start Guide
ViewSonic |
1 |
VT3210LED/VT4210LED |
ENGLISH
Getting Started
Installing the LED TV
Disconnecting the stand
1.Place the TV face down on a soft cloth or cushion on a table.
2.Remove the screw securing the base to the stand.
3.Remove the base.
Installing the stand
1.Place the TV face down on a soft cloth or cushion on a table.
2.Attach the base to the stand with 4 screw.
ViewSonic |
2 |
VT3210LED/VT4210LED |
Getting Started
Mounting ViewSonic LED TV to the wall
The LED TV can be used in a free standing or wall-mounted position. Before installing the product to the wall, please consider the following guidelines:
•Read the Important Safety Instructions, at the start of this manual.
•Do not install in a moist or wet environment. This equipment is intended for indoor use.
•Do not install near heat source, or strong magnetic fields.
•Use only UL approved wall-mounting brackets to support the LED TV weight.
•Before attaching the wall mount plate to the back cover, ensure the product is working.
•If your LED TV is already set up for free-standing operation, you need to first remove the stand before mounting the device to the wall.
To attach the wall-mount bracket to LED TV safely, please use the following guidelines:
•Disconnect the power and any other cables that might hinder moving the LED TV.
•Set the LED TV on a table or work surface, placing the screen face down on a towel or woolen blanket to protect the screen surface from damage while installing plate.
•Before installing the LED TV on the wall, ensure you have recorded the product serial number on page (i) of the User Guide, as you will need the serial number to request service should there be a service need.
•Install the wall mount plate to the LED TV using screws NO LONGER than 10mm, as longer screws found in universal (non-ViewSonic) wall mount kits may damage the power supply causing the unit to fail. The wall-mount screw type is M6 x L13 or M6 x L10.
•Mount the wall mount bracket to the wall ensuring use of proper screws to support the installation. Ensure there is at least 3 cm of space surrounding any air-vents of your LED TV to allow adequate cooling during operation.
•Hang the LED TV wall mount plate to the wall mount bracket, completing installation. Enjoy your ViewSonic LED TV!
ENGLISH
ViewSonic |
3 |
VT3210LED/VT4210LED |
Loading...