Victory Refrigeration VPT-119-NS, VPT- 88-NS, VPT- 46-NS, VPT-65-NS User Manual

Size:
349.43 Kb
Download

R e f r i g e r a t i o n a t i t s b e s t

Installation, Operation & Troubleshooting Instructions

Pizza Table Refrigerator

For Models: VPT- 46-NS,VPT-65-NS,VPT-88-NS,VPT-119-NS

Manual Part No.: 50842804

Rev: 00

Print Date: 07/20/04

1 1 0 W o o d c r e s t R o a d , C h e r r y H i l l , N J 0 8 0 0 3

Phone: (856) 4284200 Fax: (856) 428-7299Website:www.victory-refrig.com

E-Mail:parts@victory-refrig.comorder-entry@victory-refrig.comservice@victory-refrig.com

PART OF AGA FOODSERVICE GROUP

T H A N K Y O U

Thank you for purchasing a Victory Refrigeration Pizza Table Refrigerator! This unit has passed our strict Quality Control Inspection and meets the high standards set by Victory Refrigeration. You have made a quality investment that with proper maintenance will give you years of service.

Please read the following installation and maintenance instructions before installing or using your unit. If you have any questions, please call our Customer Service Department at (856) 428-4200.

IMPORTANT INFORMATION - PLEASE READ

Please read these instructions carefully before installing or using. If recommended procedures are not followed, warranty claims will be denied.

Your Warranty Registration information is located on the next page of this manual. Please complete the card and submit it to Victory Refrigeration within 10 days of installation. Failure to properly register equipment can void the warranty.

Victory Refrigeration reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.

A detailed Owners Manual with a troubleshooting guide, parts lists and additional information can be ordered from the factory or may be downloaded free from the website at www.victory-refrig.com.

Warranty

(Continental USA Only)

The Seller warrants to the original purchaser, equipment manufactured by Seller to be free from defects in material and workmanship for which it is responsible. The Seller's obligation under this warranty shall be limited to replacing or repairing at Seller's option, without charge, F.O.B. Sellers factory, any part found to be defective and any labor and material expense incurred by Seller in repairing or replacing such part, such warranty to be limited to a period of one year from date of purchase or thirteen months from date of shipment from Seller's factory, whichever is earlier, provided terms of payment have been fully met. All labor shall be performed during regular working hours. Overtime premium charges will be at Buyer's expense.

Proof of purchase must be supplied to Seller to validate warranty. This warranty is valid only if equipment is properly installed, started-upand inspected by the dealer or authorized Victory Service agent.

Removal or alteration of the serial/data plate from any equipment shall be deemed to release Seller from all warranty obligations or any other obligations, expressed or implied.

This warranty does not cover Thermostat or Defrost Timer calibration and/or adjustment, freight damage, normal maintenance items outlined in Owner's Manual, adjustment of door mechanisms or replacement of light bulbs, fuses or batteries.

Any repairs or replacement of defective parts shall be performed by Seller's authorized service personnel. Seller shall not be responsible for any costs incurred if the work is performed by other than Seller's authorized service personnel. Reimbursement claims for part(s) or labor service costs must be made in writing. Model, cabinet serial numbers and installation location must be shown on the claim. A receipted bill from the servicing agency must accompany the claim, together with full details of the service problems, diagnosis and work performed. Victory reserves sole discretion whether further documentation on a claim is to be submitted.

Seller shall not be liable for consequential damages of any kind which occur during the course of installation of equipment, or which result from the use or misuse by Buyer, its employees or others of the equipment supplied hereunder, and Buyer's sole and exclusive remedy against Seller for any breach of the foregoing warranty or otherwise shall be for the repair or replacement of the equipment or parts thereof affected by such breach.

The foregoing warranty shall be valid and binding upon Seller if and only if Buyer loads, operates and maintains the equipment supplied hereunder in accordance with the instruction manual provided to Buyer. Seller does not guarantee the process of manufacture by Buyer or the quality of product to be produced by the equipment supplied hereunder and Seller shall not be liable for any prospective or lost product or profits of Buyer.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHATSOEVER. SPECIFICALLY THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE.

The foregoing shall be Seller's sole and exclusive obligation and Buyer's sole and exclusive remedy for any action, whether in breach of contract or negligence. In no event shall Seller be liable for a sum in excess of the purchase price of the item.

You may register online at www.victory-refrig.com, fax this completed page to(856) 428-7299, or copy and mail form below to Victory.

*NOTE: The following mail-inform or online registration must be filled out and forwarded to Victory by the installer or customer within 10 days afterstart-up.Failure to do this will invalidate the warranties. Retain this information for your records.

110 WOODCREST ROAD CHERRY HILL, NJ 08003-3648

TEL: (856)428-4200FAX: (856)428-7299

WARRANTIES NOT VALID UNLESS REGISTERED AT FACTORY WITHIN 10 DAYS AFTER START-UPDATE.

Cabinet Model No.______________________

Cabinet Serial No._________________

(Data plate information located inside cooler on the upper left wall)

ORIGINAL DATE OF INSTALLATION __________________________________________________________________

INSTALLATION COMPANY NAME ____________________________________________________________________

STREET_______________________________ CITY_____________________ STATE______ ZIP CODE___________

DISTRIBUTOR’S NAME_____________________________________________________________________________

STREET_______________________________ CITY_____________________ STATE______ ZIP CODE___________

INSTALLATION INSTRUCTIONS

Proper installation is the first step to operation. We recommend that your Pizza Table Refrigerator be installed by an authorized Victory Certified Installer.

Receiving Shipment

All units are performance tested and thoroughly inspected prior to shipment. Upon leaving the factory, all units are in perfect condition. Upon receipt, examine the exterior of the shipment packaging for any signs of rough handling. If the cabinet is damaged, it should be noted on the delivery slip or bill of lading and signed. A claim must be filed immediately against the carrier indicating the extent and estimated cost of damage incurred.

Uncrating

Refer to “VPT Uncrating & Caster Installation Instructions”

Locating Your New Pizza Table Refrigerator

Consider the following when selecting a location cabinet:

1.Clearance - (a) Pizza Table Refrigerators are spaced 2” (inches) off the wall by the drain line cover. There are no spacing requirements for the sides of the unit.(b) Pizza Table lids must have at least 1” (inch) clearance when fully opened to avoid any damage when or if the unit is under any type of covering.

2.Floor Load - The floor on which the cabinet will rest must be free of vibration and suitably strong enough to support the combined weights of the cabinet plus the maximum product load.

3.Ventilation - The air cooled,self-containedrefrigeration system requires a sufficient amount of cool, clean air. Avoid placing the refrigerator cabinet near heat generating equipment such as ovens, ranges, heaters, fryers, steam kettles,

etc., and out of direct sunlight. Avoid locating the self-containedrefrigerator cabinet in an unheated room, or where the room temperature may be below 65°F.

4.Ambient Temperature - Pizza Table Refrigerators are approved for operation underNSF-7standard which is for operation in +86°F room temperature.

Installing Casters

Refer to “VPT Uncrating & Caster Installation Instructions”

Leveling

Refer to “VPT Uncrating & Caster Installation Instructions”

Cabinet Cleaning

Prior to placing your new Pizza Table Refrigerator and all shelves, pan dividers and food storage pans into operation, it is advisable that the interior be washed thoroughly with a mild detergent and water solution. Rinse with clear water and a sanitizing solution. Allow cabinet to air dry.

Installing Shelves

All cabinets with shelves are supplied with pilasters and shelf clip supports. Shelves are easily installed by inserting the shelf support clips into the pilasters so they fit tightly. Align the shelf so the smaller fill wires run from front to rear and rest the shelf on the clips.

Electric Supply

Wiring should be done by a qualified electrician in accordance with local electrical codes. A separate ground wire must be supplied for all installations. A properly wired refrigerator will assure proper operation. Electrical supply requirements are on the cabinet serial/data plate located on the upper left interior tank wall inside the cabinet. It is recommended that a direct, properly protected line of the proper size wire be installed from the main supply to your refrigerator. To assure that the correct voltage is being supplied, while the refrigerator is in operation take a voltage reading at the motorcompressor electrical connections, or as close to themotor-compressoras possible.

All refrigerator electrical systems are internally grounded.

Power Cord & Switch

The power cord for the Pizza Table Refrigerator is shipped inside the refrigeration compartment.

1.Remove the rear refrigeration cover. (See Figure 1)

2.Remove the two 1/4” hex head shipping bolts at the rear of the condensing unit base. With these shipping bolts removed, the condensing unit is serviceable from the front of the Pizza Table Refrigerator. (See Figure 2)

3.Feed the power cord plug thru the round opening and reinstall the rear refrigeration cover to provide power to the

Pizza Table Refrigerator.

1

 

4.Remove the front refrigeration cover. A power switch is located in the front upper left corner of the refrigeration compartment.

5.Move the power switch to the “ON” position.

*Note: The power switch located in the front of the refrigeration compartment must be in the “ON” position for the Pizza Table Refrigerator to operate.

Figure 1

Figure 2

Temperature Controls

Temperature Controls for the pizza table refrigerator storage and pan rail areas are set at the factory to maintain NSF Standard 7 holding temperature. The temperature controls are located behind the front grill and should only be adjusted by a qualified technician.

Refrigerated Pan Rail & Night Switch

The refrigerated pan rail is a “Food Holding” area only and is not approved for storage of food. It is recommended that at the close of each work day, the food in the pan rail be removed and stored in a refrigerator.

A night switch has been provided to turn off the pan rail when not in use and is located on the front grill. This will help save energy and make cleaning easy.

The pan rail is “ON” when the night switch inside the refrigerated pan rail label displays a green light. “OFF” position is indicated when the night switch is not

displaying a green light. See “Refrigerated Pan Rail Label”.

“Refrigerated Pan Rail Label”

Installing Replacement Door Gasket (if required)

Removing

Beginning at one corner, pry gasket loose from the retaining strip. Peel remainder of gasket from the door and discard.

Replacing

Before replacing, be sure the gasket and door are at room temperature. (If necessary, soak the gasket in warm water to make it more pliable.) Align new gasket frame on the door retainer strip. Starting at one corner, press each corner of the gasket into the retainer strip. Once started, the gasket can be easily inserted around the entire perimeter of the door by simply press rolling into place.

Installation Checklist

After the cabinet has been installed, leveled and cleaned as described, refer to the following checklist prior to start-up.

Check for proper electricalhook-up.

Check exposed refrigeration line connections for leaks. Make sure refrigeration lines are not dented, kinked or rubbing.

Check condenser fan for freedom to rotate without striking any stationary members.

Check that cabinet is level.

Check to see if back of cabinet has the required 2” (inch) minimum clearance from the wall or any flat surface.

Product Load

After the Pizza Table Refrigerator has been started and reaches the proper storage temperatures, food may be loaded. For optimum energy efficiency, we recommend allowing a 1-1/2”clearance between the interior cabinet wall and product load.

2

PERIODIC MAINTENANCE

Cabinet Cleaning

Victory Refrigeration recommends periodic internal and exterior cleaning as outlined below.

Daily Exterior Cleaning

1.Clean surface with a sponge and cleaning solution. Use a non-abrasivecleaner that does not contain chlorine.

2.Polish with a soft cloth, wiping with the grain of the metal.

3.Once a week wipe with a film cutting agent to maintain shine.

Weekly Interior Cleaning

1.Remove all food, food related items and shelves.

2.Discontinue power to refrigeration system by turning temperature control switch (or dial knob) all the way to the right.

3.Remove loose food particles from interior floors, walls and ceiling.

4.Scrub all interior surfaces with warm detergent solution 100°F - 120°F (38°C - 39°C) and a nylon bristled brush.

5.Rinse with clear water and allow to air dry.

6.Reinstall shelves.

7.Restore power to refrigeration system by turning temperature control switch (or dial knob) to the right.

8.Return food to cabinet when temperature indicator reaches safety zone.

Condenser Maintenance

To keep your cabinet running efficiently, it is recommended that you clean the condenser once every three months. However, once a month is recommended if the unit is located near cooking equipment which produces grease laden vapors, i.e. fryers, grills, steam kettles, etc.

The refrigeration condensing unit is accessible from the front of the Pizza Table Refrigerator. (See Figure 3)

Caution: At installation two shipping screws must be removed from the rear of the condensing unit to allow service from the front of the unit. (Refer toFigure 2)

1.Remove the front refrigeration cover (grill), by removing all screws. Be careful of the Night Switch when removing.

2.Remove power from the Pizza Table Refrigerator by moving the power switch to the “OFF” position.

3.Remove the air baffle located above the condenser.

4.Remove the two screws at the front of the condensing units base.

5.Slide the condensing unit forward to clean.

Caution: The suction line coil will expand to allow the unit to slide forward. Observe the suction line coil as the unit slides forward to ensure no interference is encountered.

6. Reverse the steps for installation and restart of the Pizza Table.

Figure 3

WARNING: Failure to keep condenser clean may cause premature failure of motor-compressorwhich will NOT be covered by warranty.

Lubrication

Unless otherwise specified, all Victory refrigerators are equipped with oilless type motors. The motor-compressoris a sealed unit and is constantly lubricated when in operation. The condenser and the evaporator motors are equipped with lifetime oiled bearings which never need to be oiled.

3

BEFORE CALLING SERVICE GUIDE FOR COMMON PROBLEMS

Caution: Disconnect Power Supply Prior to Attempting Any Service!

4

REPLACEMENT PARTS

VPT Pizza Tables

Part No.

 

Description

VPT46

VPT65

VPT88

VPT-119

 

 

 

 

 

 

 

Refrigeration Components

 

 

 

 

 

 

 

 

 

 

10797224

Condenser Unit w/ Fan Assembly, RH or LH (Complete)

X

 

 

 

10797215

Condenser Unit w/ Fan Assembly, RH or LH (Complete)

 

X

 

 

10797232

Condenser Unit w/ Fan Assembly, RH (Complete)

 

 

X

 

10797226

Condenser Unit w/ Fan Assembly, LH (Complete)

 

 

X

 

10797221

Condenser Unit w/ Fan Assembly, RH (Complete)

 

 

 

X

10797211

Condenser Unit w/ Fan Assembly, LH (Complete)

 

 

 

X

50855901

Compressor, 1/4 H.P.

R134a

X

 

 

 

50762901

Compressor, 1/3+ H.P.

R134a

 

X

 

 

50848201

Compressor, 1/3 H.P.

R134a

 

 

X

 

50831201

Compressor, 1/2+ H.P. R134a

 

 

 

X

50686503

Filter Drier, 1/4” ODF

 

X

X

X

X

50878402

Expansion Valve

 

X

X

X

X

50757404

Coil, Condenser

 

X

X

X

 

50829801

Coil, Condenser

 

 

 

 

X

50193101

Fan Motor, Condenser

 

X

X

X

X

50618602

Blade, Condenser Fan

 

X

X

X

X

04458311

Bracket, Condenser Fan Motor

X

X

X

 

04458301

Bracket, Condenser Fan Motor

 

 

 

X

04458212

Fan Cover, Condenser

 

X

X

X

 

04458201

Fan Cover, Condenser

 

 

 

 

X

04458411

Top Fan Cover, Condenser

X

X

X

 

04458401

Top Fan Cover, Condenser

 

 

 

X

10796919

Coil Assembly, Evaporator R134a (RH or LH)

X

 

 

 

10796904

Coil Assembly, Evaporator R134a (RH)

 

X

X

 

10796916

Coil Assembly, Evaporator R134a (LH)

 

X

X

 

10796921

Coil Assembly, Evaporator R134a (RH)

 

 

 

X

10796905

Coil Assembly, Evaporator R134a (LH)

 

 

 

X

50597502

Coil, Evaporator (Fin to Fin Dimensions: 4” x 6” x 13”)

X

 

 

 

50597503

Coil, Evaporator (Fin to Fin Dimensions: 4” x 6” x 17”)

 

X

X

 

50597602

Coil, Evaporator (Fin to Fin Dimensions: 4” x 6” x 25”)

 

 

 

X

10797304

Fan Panel Assembly, Evaporator

X

 

 

 

10797303

Fan Panel Assembly, Evaporator

 

X

 

 

10797302

Fan Panel Assembly, Evaporator

 

 

X

 

10797301

Fan Panel Assembly, Evaporator

 

 

 

X

04420301

Fan Panel (without fan, includes 1 cut-outfor fan)

X

 

 

 

04458803

Fan Panel (without fan, includes 1 cut-outfor fan)

 

X

 

 

04458802

Fan Panel (without fan, includes 2 cut-outsfor fans)

 

 

X

 

04458801

Fan Panel (without fan, includes 2 cut-outsfor fans)

 

 

 

X

04422101

Fan Panel End, Left

 

X

X

 

X

04422103

Fan Panel End, Right

 

X

X

 

X

04422109

Fan Panel End, Left

 

 

 

X

 

04422110

Fan Panel End, Right

 

 

 

X

 

50639801

Fan Motor, Evaporator

 

X

X

X

X

50598001

Fan Blade, Evaporator

 

X

X

 

 

50830503

Fan Blade, Evaporator

 

 

 

X

X

50842201

Fan Guard, Plastic

 

X

X

X

X

04415201

Bracket, Evaporator Fan Motor

X

X

X

X

 

 

 

 

 

 

 

5

VPT Pizza Tables

Part No.

Description

VPT46

VPT65

VPT88

VPT-119

 

 

 

 

 

 

 

 

 

Refrigeration Components (cont’d)

 

 

 

 

 

 

 

 

 

 

 

 

04461601

Condensate Drain Pan

X

X

X

 

 

04447401

Condensate Drain Pan

 

 

 

X

 

50313101

Temperature Control, Ranco (Model# 016-111)

X

X

X

X

 

50686801

Solenoid Valve, 1/4 with Coil (MN# MKC120V)

X

X

X

X

 

50694702

Pressure Control, Low (MN# 085CP1A-1K)

X

X

X

X

 

50569502

Thermometer, Hanging Stem

X

X

X

X

 

 

Electrical Components

 

 

 

 

 

 

 

 

 

 

 

 

50518901

Heater Wire, Half Door Mullion

X

X

X

X

 

50828201

Cord & Plug Assembly (115V/60Hz/, 15 Amps)

X

X

X

X

 

50584001

Switch, Toggle

X

X

X

X

 

50619602

Switch, Rocker Green Light

X

X

X

X

 

 

Door and Components

 

 

 

 

 

 

 

 

 

 

 

 

10818401

Door Assembly, Left Hinged

X

X

X

X

 

10818501

Door Assembly, Right Hinged

 

X

X

X

 

50829502

Gasket, Half Door

X

X

X

X

 

50827602

Gasket Retainer Strip, Side

X

X

X

X

 

50827701

Gasket Retainer Strip, Top or Bottom

X

X

X

X

 

50827902

Door Pan (or Liner), Flat

X

X

X

X

 

 

Hardware

 

 

 

 

 

 

 

 

 

 

 

 

10685101

Hinge Assembly, Complete

X

X

X

X

 

50520102

Hinge Barrel

X

X

X

X

 

50520103

Hinge Base

X

X

X

X

 

50520104

Hinge Shim

X

X

X

X

 

50520105

Hinge Cover

X

X

X

X

 

50520106

Hinge Cam

X

X

X

X

 

50678801

Hinge Barrel Base Screws

X

X

X

X

 

05312701

Hinge Barrel Shim

X

X

X

X

 

50648301

Caster, 3-1/2”(with Brake)

X

X

X

X

 

50648302

Caster, 3-1/2”(without Brake)

X

X

X

X

 

 

Shelves

 

 

 

 

 

 

 

 

 

 

 

 

50597806

Shelf, Epoxy Coated Narrow End

X

X

X

X

 

50597906

Shelf, Epoxy Coated Narrow Center

 

 

X

X

 

50022501

Clips, Shelf

X

X

X

X

 

03244201

Strip, Pilaster

X

 

 

 

 

03254101

Pilaster & Mullion

 

 

 

X

 

03254102

Pilaster & Mullion

 

X

X

 

 

6

VPT Pizza Tables

Part No.

Description

 

VPT46

VPT65

VPT88

VPT-119

 

 

 

 

 

 

 

Cabinet, Miscellaneous

 

 

 

 

 

 

 

 

 

 

 

50883201

Victory “Refrigerator” Logo

 

X

X

X

X

50830404

Cutting Board, Standard (Dimensions: 18” x

119”)

 

 

 

X

50830405

Cutting Board, Standard (Dimensions: 18” x

88”)

 

 

X

 

50830406

Cutting Board, Standard (Dimensions: 18” x

65”)

 

X

 

 

50830407

Cutting Board, Standard (Dimensions: 18” x

46”)

X

 

 

 

50839501

Cutting Board, Granite (Non-NSF;Dimensions:18”x 119”)

 

 

 

X

50839502

Cutting Board, Granite (Non-NSF;Dimensions:18”x 88”)

 

 

X

 

50839503

Cutting Board, Granite (Non-NSF;Dimensions:18”x 65”)

 

X

 

 

50839504

Cutting Board, Granite (Non-NSF;Dimensions:18”x 46”)

X

 

 

 

01379601

Bracket, Retainer

 

X

X

X

X

50755502

Rubber Boot, Garnish Rack

 

X

X

X

X

50755503

Rack, 2.25” Garnish

 

X

X

X

X

05314201

Lid, Pan Rail (2 Per VPT-119)

 

 

 

 

X

05314214

Lid, Pan Rail (2 Per VPT-88;1 PerVPT-46)

 

X

 

X

 

05314216

Lid, Pan Rail (1 Per VPT-65)

 

 

X

 

 

50632001

Handle, Lid with Screws

 

X

X

X

X

50767001

Kit, Lid Bracket with Pins

 

X

X

X

X

01372801

Pan Support, Rail

 

 

 

 

X

01372802

Pan Support, Rail

 

X

 

X

 

01372813

Pan Support, Rail

 

 

X

 

 

09351301

Divider, Pan

 

X

X

X

X

04457801

Grill, Rear (covers back of right side refrig. system)

X

 

 

 

04457811

Grill, Rear (covers back of right side refrig. system)

 

X

X

X

04457812

Grill, Rear (covers back of left side refrig. system)

 

X

X

X

04463101

Grill, Front w/ Flour Filter (covers front of refrig. system)

X

X

X

 

04463102

Grill, Front w/o Flour Filter (covers front of refrig. system)

X

X

X

 

04470201

Grill, Front w/o Flour Filter (covers front of refrig. system)

 

 

 

X

04470203

Grill, Front w/ Flour Filter (covers front of refrig. system)

 

 

 

X

10803101

Grill Assembly, Flour Filter (complete)

 

 

 

 

X

10803104

Grill Assembly, Flour Filter (complete)

 

X

X

X

 

 

 

 

 

 

 

 

7

WIRING DIAGRAM

VPT (Self-Contained)

115V/60Hz/1Ph

8

Victory Refrigeration Inc

110 Woodcrest Road

Cherry Hill, NJ 08003-3648

Tel: (856)428-4200

Fax: (856)428-7299Web: www.victory-refrig.com

E-mail: service@victory-refrig.comor

parts@victory-refrig.com