Victory Refrigeration FIS-1D-S7-XH, FISA-1D-S7-XH, FIS-3D-S7-XH, FIA-1D-S7-XH, FISA-3D-S7-XH, FIS-2D-S7-XH, FISA-2D-S7-XH, FIA-2D-S7-XH User Manual

Size:
485.57 Kb
Download

Project:

Location:

Item #:

Quantity:

Extra-HighRoll-inFreezers

FIS MODELS —

Stainless steel exterior and interior.

FIS-1D-S7-XHFIS-2D-S7-XHFIS-3D-S7-XH

FISA MODELS —

Stainless steel exterior. Aluminum interior.

FISA-1D-S7-XHFISA-2D-S7-XHFISA-3D-S7-XH

FIA MODELS —

Stainless steel fronts and doors. Aluminum sides and interior.

FIA-1D-S7-XHFIA-2D-S7-XH

Roll-Thruand Remote Models Available

FISA-2D-S7-XH

Cabinet:

Each Victory cabinet is internally supported, braced and assembled into a single rigid unit. The cabinet front and doors are constructed of heavy gauge polished stainless steel to maintain an attractive appearance after years of heavy use. Foamed-in-placepolyurethane insulation throughout the cabinet and doors ensures the ultimate in energy efficiency.

Doors:

The self-closingdoors are securely mounted on ruggedcam-lifthinges, which have a lifetime guarantee. Each door has a heavyduty cylinder lock andself-adjustingmagnetic gasket to prevent the cold air from escaping. Humidity control wires located around the door jamb prevent condensation from forming on the cabinet front and are concealed by a high impact,non-conductivethermal breaker strip. The interior door liner is constructed of durable ABS material, which resists denting and scratching and is

easy to clean. Each safety grip handle is guaranteed for life. Removable ramps are provided on the bottom of each door opening.

Refrigeration System:

All components of the self-containedrefrigeration system are mounted on top of the cabinet. The air circulating fans and the forcedconvection-coolingcoil are contained in an insulated housing separate from the product zone allowing for maximum food storage capacity. All condensate water is disposed of automatically by the energy efficientnon-electriccondensate evaporator, no plumbing is required.

FIS and FISA Models

• Digital Thermometer/Battery Back-up

FIA Models

• Dial Thermometer

Standard Features (all models)

Energy Saver Switch

Stainless Steel Case Front and Door(s)

Lifetime Heavy-DutyCam Lift Hinges

Lifetime Safety Grip Handle(s)

Self-ClosingDoors with Safety Stops

Adjustable Wiper Gasket(s)

Removable Ramps(s)

Energy Saving Thermal Breaker Strips

Door Opening Accepts Carts up to 27”w x 29”d x 72 1/2”h

Heavy-DutyCylinder Locks

One Piece Self-AdjustingMagnetic Door Gaskets

High Impact ABS Interior Door Liner

Plasticized Fin Coil

Environmentally Friendly R-404ARefrigerant

Non-ElectricCondensate Evaporator

Automatic Defrost

Stainless Steel Floor

Cord and Plug Attached on 115V Models 12 Amps or Less

Optional Features and Accessories

Dial or Digital Thermometer

Change Door Swing

Shelf Pilaster Strips

Adjustable Stainless Steel Wire Shelves

Stainless Steel Angle Pan Slides

Zinc Plated Wire Pan Slides

Stainless Steel Case Back

Remote and Roll-ThruModels

Note: All 2 & 3 section Roll-Thrumodels only have stainless steel interiors

Approvals:

Victory Refrigeration specification sheets are available online at www.victory-refrig.com.

Victory Refrigeration, Inc. I 110 Woodcrest Road I Cherry Hill, NJ 08003 USA I Phone: 856.428.4200 I Fax: 856.428.7299 I E-mail:sales@victory-refrig.com

Victory Refrigeration, Inc.

Extra-HighRoll-inFreezers

CHARACTERISTICS

ONE SECTION

TWO SECTION

THREE SECTION

 

 

Roll-In

Roll-Thru

Roll-In

Roll-Thru

Roll-In

Roll-Thru

 

Width, Overall

36 1/2

36 1/2

68 7/8

68 7/8

101 1/4

101 1/4

Depth, Overall (incl. handles)

35 7/8

39 3/8

35 7/8

39 3/8

35 7/8

39 3/8

Height, Overall

89 1/2

89 1/2

89 1/2

89 1/2

89 1/2

89 1/2

Depth, Door(s) Open 90º

65 1/4

65 1/4

65 1/4

65 1/4

65 1/4

65 1/4

Depth Cast Over Ramp

35 1/2

35 1/2

35 1/2

35 1/2

35 1/2

35 1/2

Clear Door Width

27 3/4

27 3/4

27 3/4

27 3/4

27 3/4

27 3/4

Clear Full Door Height

72 1/4

72 1/4

72 1/4

72 1/4

72 1/4

72 1/4

Capacity Net (cubic feet)

36.3

36.3

72.6

72.6

108.9

108.9

No. of Full Doors

1

2

2

4

3

6

Cabinet Voltage

115/60/1

115/60/1

115/60/1

115/60/1

115/60/1

115/60/1

Feed Wires

3

3

32

3

3

3

Condensing Unit Voltage

208-230/60/1

208-230/60/1

208-230/60/1

208-230/60/1

208-230/60/1

208-30/60/1

Condensing Unit Size (HP)

3/4

1

1

2

2.5

2.5

Total Amperes

10.9

13.1

13.9

18.2

22.7

22.7

Crated dim. & wts.

Ht.

Width

Depth

Cu.Ft.

Lbs

One Section

921/2

413/4

443/4

94.1

720

Two Section

921/2

745/8

443/4

168.1 1090

Three Section

921/2

107

443/4

241.1

1470

Approximate Roll-Thruweights, add 15%

FOR REMOTE MODELS– Substitute an “R” for the “S” in suffix. For example: Model FIS-1D-S7(self-contained)would beFIS-1D-R7remote cabinet. Air circulating fans, expansion valve and plasticized coil are provided. Condensing units not supplied. The following units are recommended with1/2” O.D. Suction line,1/4” O.D. Liquid line.

REMOTE REFRIGERATION

 

Cond. Unit

BTUH

Cabinet

Amps*

One Section

3/4 H.P.

2540

115/60/1

4.9

Two Section

1 H.P.

4400

115/60/1

7.8

Three Section 2.5 H.P.

5800

115/60/1

8.5

*(In Defrost)

For Remote Roll-Thru–Consultfactory

Dimensional tolerance ± 1/4” Metric dimensions (MM)

 

ROLL-THRUMODELS

 

 

39.38

ELEC.

39.38

39.38

CONN.

(1000)

(1000)

(1000)

 

ELEC. CONN.

 

ELEC. CONN.

 

 

 

ROLL-INMODELS

NOTE: If cabinet is located directly against wall and/or under low ceiling, a minimum clearance of 2” is required.

We reserve the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.

31.25

(793)

35.88

(911)

 

63.62

 

(1616)

ELEC.

 

CONN.

35.88

 

(911)

96.00

(2438)

35.88

(911)

 

36.50

 

(927)

 

89.50

72.25

(2273)

(1835)

 

.88

27.75

(705)

(22)

 

 

 

ELEC. CONN.

 

 

 

68.88

 

 

 

(1749)

 

 

 

 

89.50

 

 

 

(2273)

72.25

 

 

72.25

(1835)

 

 

(1835)

.88

27.75

27.75

.88

(705)

(705)

(22)

(22)

 

 

 

ELEC.CONN.

 

 

 

101.25

 

34.88

 

(2571)

 

(873)

 

 

 

14.12

 

 

 

(358)

 

 

 

89.50

 

 

 

(2273)

27.75

27.75

27.75

32.38

(705)

(705)

(705)

(822)

 

 

 

35.50 (902)

 

 

 

TO RAMP

Continuous product development may necessitate specification changes and design without notice.

Victory participates in the KCL CADalog, the most current source of CAD symbols for foodservice designers worldwide. Symbols include standard equipment in plan, side, front and 3-Dviews, layered for FEDA/FCSI recommended guidelines.

PART OF AGA FOODSERVICE GROUP

Copyright November 2007

Printed in U.S.A.