SATA / IDE TO USB 2.0 Adapter
SUPPORT 2.5”, 3.5” & 5.25” IDE/SATA DRIVE
FEATURES
Transfer Rates Up to 12Mbps With USB 1.1
Transfer Rates Up to 480Mbps With USB 2.0
Easily add storage to any system with USB
Currently supports up to 500GB
Supports ATA/ATAPI-7
Supports LBA-48 Addressing
Hot-swappable: Plug and play without rebooting!
PRODUCTDESCRIPTION
The SATA/IDE-USB Adapter gives you the flexibility of connecting almost any type of drive to your computer via USB. SATA, 3.5” IDE, 5.25” IDE, and 2.5” IDE drives are all supported and can be easily hot-swapped to your system. The included external power adapter will allow you to power your drives outside your system giving you the ability to quickly add or swap between drives without opening your case. The SATA/IDE-USB adapter incorporate 3 interfaces to one USB adapters.
SPECIFICATION
Interface: |
SATA to USB 2.0 |
|
3.5” & 5.25” IDE to USB 2.0 |
|
2.5” IDE to USB 2.0 |
Dimensions: |
70 x 43 x 10 mm |
Cable Length: |
92cm (36in) |
SYSTEMREQUIREMENTS
Intel Pentium II 350MHz-compatible or Apple G3 processor and greater
MicrosoftWindows 98SE/ME/2000/XP or Mac OS 8.6 and greater
USB-equipped system
For USB 2.0 speeds, the system must support USB 2.0 specifications
CD Rom drive (if drivers are needed)
MODEL: CB-ISATAU2
Loading...