TRC-1280
Owner’s Manual
TRC-1280 TOUCH SCREEN
This remote control was Custom Programmed for you by:
For questions about your Custom Programming call:
Custom Programming of a complex home theater and/or a multi-room system is one of the most challenging tasks within an audio/video installation. It involves an intimate knowledge of how the components interact and exact details on the proper sequences of control.
Only a Total Control dealer has the requisite experience and training to quickly and effectively customize a remote control for true automated operation.
Congratulations on your choice!
TRC-1280 Owner's Manual © 2012 Universal Remote Control, Inc.
The information in this manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Universal Remote Control, Inc.
UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL.
The information in this manual may be subject to change without prior notice.
URC - Control the Experience is a registered trademark of Universal Remote Control, Inc.
All other brand or product names are trademarks or registered trademarks of their respective companies or organizations.
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532
TRC-1280 TOUCH SCREEN
Congratulations! |
1 |
Using the TRC-1280 |
2 |
Connecting the Battery Pack |
3 |
Using the Charging Base |
3 |
Two-Way via WiFi |
3 |
Displaying the Settings Screen |
4 |
Sleep Settings |
5 |
Wireless Network Settings |
5 |
Brightness |
5 |
System |
5 |
Button Light |
6 |
Power |
6 |
Calibration |
6 |
Date and Time |
6 |
Sound & Vibration |
7 |
Pickup |
7 |
Factory Default |
7 |
Exit |
7 |
Maintaining Your TRC-1280 |
8 |
Specifications |
8 |
USA Limited Warranty Statement |
9 |
Precautions and Information Concerning |
|
Rechargeable Lithium Polymer Batteries |
10 |
Federal Communication Commission Interference |
|
Statement |
11 |
Regulatory Information to the user |
12 |
Declaration of Conformity |
13 |
TRC-1280 TOUCH SCREEN
Congratulations!
Thank you for purchasing the Total Control TRC-1280 universal remote control. This unit can control every connected device in your home using the Total Control Advanced System Controller. You can also control devices located in different rooms via Wi-Fi. Controlling your home is simple with the TRC-1280 remote.
Two-way Instant-Wi-Fi controller with dazzling 2.8” color touch screen interface
Receive two-way feedback for the rooms and music sources that can be controlled. Turn On/Off music while also viewing the current selections artist name, album and song title.
Vibrating Haptic Technology confirms button presses
The TRC-1280 has an Active Matrix color TFT display with vibrating Haptic feedback technology. When touching of an LCD button, the screen vibrates to confirm the button press.
Includes rechargeable Lithium Polymer Batteries and charger base
The TRC-1280 comes equipped with a Lithium Polymer battery that is rechargeable with the 6V charging base. You no longer need to waste money on disposable batteries or trying to locate misplaced batteries.
Requires MRX-10 or compatible URC Advanced System Controller
In combination with an MRX-10 or compatible URC Advanced System Controller, the TRC-1280 can control your system without being in line-of-sight of the equipment by sending the commands over your home network.
Programmable only by URC certified professional programmer on-premises or off-premises via the Internet
To fully automate your audio/video system, the programmer must have detailed knowledge of each component, LAN configuration, Wi-Fi optimization and how the system is connected and operated. With the ability to connect the TRC-1280 to an MRX-10 or compatible URC Advanced Controller, your installer can program the remote, with your permission, from his office should the need arise. Only a trained and certified professional audio/video installer can install a TRC-1280 remote control in a timely and efficient manner.
Page 1
TRC-1280 TOUCH SCREEN
Using the TRC-1280
The TRC-1280’s Main Menu pages display the activities and devices in your system. Press the Main page button to see what your choices are. Large systems may have more than one page. Press either of the Page buttons to see further options.
Gently press any screen button with your finger to select an activity or a device. The screen will change to display the buttons you need for that activity/device. The Page buttons may reveal additional buttons for some devices and activities.
When you would like to control another device, press the Main or Page buttons and select a new device from the Main page.
The Main button always displays the Main menu pages.
The Volume and Mute buttons are always available regardless of what screen is displayed.
The Page buttons display additional pages of controls.
The 5-way cursor buttons enables you to both scroll lists of artists, albums or songs from your Music Server on the TRC-1280 touch screen or to navigate TV guides and menus with ease.
Page 2
TRC-1280 TOUCH SCREEN
Connecting the Battery Pack
Unlock the rear cover by pressing down on the spring lock at the top of the cover. Remove the cover. For shipment from the factory, the battery is left out of the TRC-1280. Place the battery into the battery compartment, making sure you align the contacts on the battery to the contacts on the TRC-1280. The battery will snap into place when aligned properly. Replace the cover and snap it into place.
Using the Charging Base
Plug the 6V DC adapter into a power outlet and into the back of the charging base. Gently place the TRC-1280 into the cradle of the charging base. It automatically aligns itself to the contacts on the charging base. The Status light should immediately light. Red indicates that it is charging. Blue shows that it is fully charged. There is no harm in leaving the TRC-1280 on its charging base whenever it is not in use.
Red indicates charging, Blue that the remote is fully charged.
Two-Way via Wi-Fi
To use the TRC-1280 with any two-way companion product, the TRC-1280 must be configured by your installer to be part of a LAN (local area network) via a Wi-Fi b/g access point or router. This is not user configurable. If you have any questions, consult your custom installer.
Page 3
Loading...