Unigreen Trolleys and Barrows User Manual

ENGLISH

OPERATING AND MAINTENANCE

MANUAL

CR

TROLLEYS AND BARROWS

Please read this instruction booklet carefully before use.

01/2005

	ALLOWED EQUIPMENTS					CR 125P	CR 125P	CR 80	CR 75	CR 70	CR 50P
								2R	1R	1R
		Pump			MC 20	X		X	X	X	X
	COMET PUMPS	“	“		MP 30		X
		“	“		MP 40		X
		“	“		APS 31		X
	ANNOVI REV.	Pump			AR 252	X		X	X	X	X
	PUMPS	“	“		AR 30		X
		Oleo Mac			550	X		X	X	X	X
		CM			46	X		X	X	X	X
		B. & S.			6,5 HP		X
	COMBUSTION	Honda GX120			4 HP		X
		Tecumsen			5 HP		X
	MOTORS
		Honda GC160			5 HP		X
		Honda GX160			5,5 HP		X
		Robin			2 HP	X		X	X
		B. & S.			3,5 HP	X				X	X
	ELECTIC	Monofase			220 V	X		X	X	X	X
	MOTOTRS	Trifase			380 V	X	X			X	X
		AVT.			20	X	X	X	X	X	X
	HOSE-REELS	“ “			40	X	X	X	X
		“	“		50		X
	SPRAYGUNS	Lever Spraygun				X	X	X	X	X	X
		“Mitra” Spraygun				X	X
	WEED-KILLING
	BOOMS	3 mt Weed-killing boom				X	X
	NOZZLES	Standard Nozzle				X	X
		Antidrip Unijet Nozzle				X	X
		Fan		KEMATAL		X	X
		“	“	CERAMIC		X	X
	NOZZLE TIPS	“	“	BRASS		X	X
		“	“ Stainless-Steel			X	X
		Cone		CERAMIC		X	X
	LAWNMOWER	Tow-hook kit				X	X
	WEIGHT IN Kg	Net Weight (full optionals)				55	80	45	45	30	30
		Total Weight (full optionals)				180	205	125	120	100	80

2

20									1		2		3		4		5 21					6
19																											7
18
17																											8
16
																											9
15
																										10

14			13		12	11
				CR 75
1	17	13	2	3	21 5

18																						7
																				4
16																						6
																					14
15																						11
																							10
8													4
									CR 50

3

1									17							2		3 4			5 21			8
18																																					7
20
19																																				6
16																																					9
15																																				11
																																						10
																14								12
																			CR 80
									1					2		3 4			5 21					6
18																																								7
17
16
8																																								9
15
																																									11
14
																																							10

13	12
	CR 125

4

2	3	4	5	21 12	22

2

23

16

24	25	26	OFF	27

ON

S

c

d e

f

g

b

a

44

11

h

i

p o n m l

5

						31 43 38 29		30
+ bar		- bar
+ psi		- psi
31			29	32				35
				42				40
			40	34
32			42
								33
38				39
33
28 314336 29			30			28	42 31 29	30
32								32
				33				34
42			34	40				36
40			37					37
								38
38			41					41
39			33
				39
28 29	30	31				29
			32	- bar			+ bar
42				- psi			+ psi
			33
41				42
			34				PRESS
			35
40			36	30
			37				BY-PASS
			38
								OFF
39							ON
				40	36	41
6

13
12	1
16
	4
22
13
4	1
16
	12
	5
	7

SUMMARY

PART ONE

1. GENERAL INFORMATION _______________________________________9

1.1	TERMS OF THE GUARANTEE..................................................................................	9
1.2	THE ADDRESS OF THE MANUFACTURER..........................................................	10
1.3	USE AND CONSERVATION OF THESE OPERATING
	AND MAINTENANCE INSTRUCTIONS ................................................................	10
1.4	SYMBOLS .................................................................................................................	11

2. FEATURES AND TECHNICAL SPECIFICATIONS__________________11

2.1	IDENTIFICATION OF PARTS...................................................................................		12
	2.1.1	Trolley/Barrow parts ......................................................................................	12
	2.1.2	Motor-driven pump parts ...............................................................................	12
2.2	SAFETY DEVICES ....................................................................................................		12
2.3	IDENTIFICATION LABELAND WARNING LABELS...........................................		13
2.4	STANDARD ACCESSORIES ....................................................................................		14
2.5	OPTIONALACCESSORIES......................................................................................		14

3.DESIGNATED USE _____________________________________________14

4.OPERATION___________________________________________________15

4.1	PRELIMINARY PROCEDURES ...............................................................................		15
	4.1.1 Control and connection to mains electricity...................................................		16
	4.1.2	Preparing chemicals for spraying..................................................................	17
	4.1.3	Filling the tank ...............................................................................................	17
4.2	SPRAYING..................................................................................................................		18

5.SWITCHING OFF ______________________________________________20

6.CLEANING, STORAGE AND MAINTENANCE_____________________21

6.1	CLEANING AND STORAGE....................................................................................	21
6.2	ROUTINE MAINTENANCE .....................................................................................	22
	6.2.1 Diaphragm rupture .......................................................................................	22
6.3	SPECIAL MAINTENANCE.......................................................................................	23

7.MOVING AND TRANSPORTATION_______________________________23

8.DISMANTLING AND DISPOSAL _________________________________24

9.PROBLEMS, CAUSES AND SOLUTIONS__________________________24

PART TWO

1.REMOVING THE APPLIANCE

FROM ITS PACKING MATERIALS_______________________________25

2.ASSEMBLY ____________________________________________________25

2.1 MOUNTING THE HOSE REEL (OPTIONAL)..........................................................

26

8

INTRODUCTION

This manual is divided into two separate sections.

The first is for use by the end user and the Skilled Technician; the second is for use by the Skilled Technician alone.

Skilled Technician means a person, generally employed by the service centre, who has received appropriate training and is authorised to carry out special maintenance and repairs on the appliance (the term “appliance” is used to indicate both trolleys and barrows). Any work on electrical parts must be carried out by a Skilled Technician who is also a Qualified Electrician, i.e. a person with professional training who is authorised to check, install and repair electrical equipment correctly and according to the current regulations in the country where the appliance is installed.

CAUTION

•The appliances are supplied in a kit and must be assembled; the motor-driven pump (operated by an electric motor or combustion engine) must be the type recommended by the Manufacturer.Othertypesofmotor-drivenpumpsmustnotbeusedunlesspriorauthorisation is granted by the Manufacturer.

•The kits must be assembled and the motor-driven pump must be installed by a Skilled Technician according to the instructions contained in part two of these instructions.

The Declaration of Conformity contained at the end of this section in the instructions is only guaranteed if the above requisites are met.

PART ONE

1. GENERAL INFORMATION

Congratulations for choosing one of our products! We would like to remind you that we took the safety of the operator, the efficiency of its use and the protection of the environment into great consideration when designing and manufacturing this product.

In order to preserve its features over time, please read and follow these instructions carefully. Particular attention must be awarded to the parts with the following symbol:

CAUTION

as they contain important instructions regarding safety when using the appliance.

The Manufacturer is not liable for damage caused by:

•failure to comply with these instructions and the instructions for the combustion engine, if any, used with the appliance;

•use of the appliance not included in the list in the “DESIGNATED USE” section;

•failure to comply with current safety regulations and regulations for the prevention of accidents in the workplace when using the appliance;

•tampering with the safety devices and devices limiting the maximum operating pressure

•incorrect installation

•failure to carry out the required maintenance;

•modifications or actions without prior authorisation by the Manufacturer;

•use of non-original or non-specific spare parts or accessories for this model of appliance;

•repairs which were not carried out by a Skilled Technician.

1.1TERMS OF THE GUARANTEE

The guarantee is valid for a period of 24 months from the date on the sales document (receipt, invoice etc.) provided the guarantee certificate included with the appliance’s documents was sent

9