Turbosound TXD User Manual

0 (0)
Turbosound TXD User Manual

TXD series

USER MANUAL

Turbosound Ltd., Star Road, Partridge Green, West Sussex RH13 8RY UK

Tel: +44 (0)1403 711447 Fax: +44 (0)1403 710155 web: www.turbosound.com

Issue 1.3 July 2006

Copyright © 2006 Turbosound Ltd.

user manual

 

TXD series

 

Contents

 

Introduction .....................................................................................................................................

4

Thanks ..........................................................................................................................................

4

Features ...........................................................................................................................................

5

Product Range Summary...............................................................................................................

6

TXD-081........................................................................................................................................

6

TXD-121........................................................................................................................................

6

TXD-151........................................................................................................................................

7

TXD-252........................................................................................................................................

7

TXD-115........................................................................................................................................

8

TXD-215........................................................................................................................................

8

TXD-118........................................................................................................................................

9

TXD-218........................................................................................................................................

9

TXD-12M ....................................................................................................................................

10

TXD-15M ....................................................................................................................................

10

System requirements ...................................................................................................................

12

Bi-amplified operation ..............................................................................................................

13

Amplifier considerations ..........................................................................................................

14

Equalisation ...............................................................................................................................

14

Dispersion ..................................................................................................................................

15

System Connections.....................................................................................................................

16

Passive two way system...........................................................................................................

16

Passive two-way system (TXD-252) ........................................................................................

16

Passive full-range system with subs .......................................................................................

17

Passive full-range system with subs .......................................................................................

17

Passive full-range system with subs .......................................................................................

18

Live performance monitor system ..........................................................................................

18

Bi-amplified system with subs.................................................................................................

19

Club system with multiple zones.............................................................................................

20

Mounting and fixing .....................................................................................................................

21

Pole assembly............................................................................................................................

22

Choosing the best location ..........................................................................................................

23

Maintenance..................................................................................................................................

24

Removal of the low frequency driver(s)..................................................................................

24

Removal of the high frequency compression driver .............................................................

24

Appendix A....................................................................................................................................

26

Technical Specifications ...........................................................................................................

26

Appendix B ....................................................................................................................................

28

Spares and Accessories............................................................................................................

28

Flying Accessories ....................................................................................................................

28

Appendix C ....................................................................................................................................

29

TXD series manual page 2

user manual

TXD series

Use of thread locking compounds ..........................................................................................

29

Appendix D....................................................................................................................................

30

Limited Warranty ..........................................................................................................................

30

Warranty Coverage ...................................................................................................................

30

Shipping.....................................................................................................................................

30

Incidental and consequential damages ..................................................................................

31

Limitation of implied warranties..............................................................................................

31

TXD series manual page 3

user manual

TXD series

INTRODUCTION

Thanks

Thank you for choosing a TURBOSOUND TXD series loudspeaker product for your application. Please spare a little time to read the contents of this manual, so that you can obtain the best possible performance from this unit.

All TURBOSOUND products are carefully engineered for world class performance and reliability.

If you would like further information about this or any other TURBOSOUND product, please contact us. Detailed product information is available on our web site at www.turbosound.com

We look forward to helping you in the near future.

Congratulations, you have just purchased a professional loudspeaker system from the renowned Turbosound range, designed to give you the best in audio quality and many years of reliable, trouble free operation. It offers superior audio quality, full technical documentation, and rigging and flying hardware options. Please read through this manual carefully before you attempt to operate the loudspeaker system. It contains valuable information enabling you to quickly and easily set up and connect the loudspeakers, important system and set-up checks together with positioning and mounting instructions.

Unpacking the TXD series loudspeaker

After unpacking the unit please check carefully for damage. If damage is found, please notify the carrier concerned at once. You, the consignee, must instigate any claim. Please retain all packaging in case of future re-shipment.

TXD series manual page 4

user manual

TXD series

FEATURES

Superb audio quality: carefully designed and matched loudspeaker drive units are used to give

you exceptional performance and many years of reliable, trouble free operation.

High quality loudspeaker components are used throughout the range. Low frequency drivers are specified for high sensitivity and durability, while high frequency drivers are selected for consistent and reliable performance.

High frequency protection system: two-stage thermal overload circuits operate on all two-way products to prevent damage to the HF drive units from both transient peaks and long term heating effects.

Professional appearance: TXD series enclosures are equally suited to live sound and DJ applications as well as permanent installations.

Easy transportability: comfortable, ergonomic flush handles are provided on all TXD series enclosures for easy lifting and transportation in mobile sound reinforcement applications.

Wide dispersion: TXD series enclosures are designed to give wide and even dispersion patterns in order to maximise sound coverage over a given area from single loudspeakers.

Solid construction: all Turbosound TXD series cabinets are built from high grade, multilayer birch plywood and are finished in a durable semi-matt textured paint.

Integral rigging points: fitted as standard, enabling use with optional M10 shoulder eyebolts for many types of fixed installations. TXD-081, TXD-121 and TXD-151 enclosures can be permanently installed using Turbosound wall and ceiling brackets. All models are type-tested for load rating to ensure safe rigging.

Pole mount and tripod stand use is facilitated by the provision of integral pole mount fittings.

Speakon NL4MP connectors are fitted to all TXD series enclosures, enabling simple and easy hook-ups as well providing loop-in / loop-out facilities to additional enclosures.

TXD series manual page 5

user manual

TXD series

PRODUCT RANGE SUMMARY

TXD-081

The TXD-081 is a compact two-way loudspeaker recommended for portable speech and music reinforcement in an easily transportable cabinet, as well as fixed installation applications requiring professional quality background sound.

It is an all-passive design featuring an 8” low frequency driver and a 1” high frequency compression driver on a 100ºH x 60ºV Converging Elliptical Waveguide™ HF horn. The drive units are matched with an internal passive crossover network to ensure a seamless transition and these are all housed in an optimally tuned trapezoidal birch plywood enclosure.

The compression driver is protected from accidental damage due to overdriving by an intelligent protection circuit built into the crossover network which detects signal level, and automatically attenuates should it approach or exceed potentially damaging levels.

The TXD-081 is equipped with internal rigging points for use with Turbosound wall and ceiling brackets, and M10 eyebolts. A standard 35mm pole mount is fitted.

The rear panel carries dual Neutrik Speakon NL4MP speaker connectors for input and parallel connections to an additional TXD series cabinet, or TXD series bass enclosures.

TXD-121

The TXD-121 is a compact trapezoidal passive two-way loudspeaker enclosure designed for use in a wide variety of live sound, fixed installation and mobile DJ applications that require professional sound quality in an easily transportable format.

It consists of a 12” reflex-loaded low frequency driver and a 1” high frequency compression driver on a 70ºH x 40ºV dispersion HF horn in an optimally tuned trapezoidal enclosure. These highgrade components are matched with an internal second order passive crossover network to ensure a seamless transition between the HF and LF drivers.

The crossover incorporates a two stage thermal overload protection system which prevents damage to the high frequency driver, reacting instantly to large transient peaks while still allowing wide dynamic range to be maintained. Although the protection system is transparent at normal operating levels, as the level increases the signal is gradually and imperceptibly compressed once the critical threshold has been reached.

The cabinet is constructed from 15mm (5/8”) birch plywood, screwed and glued together for maximum rigidity. A pole mount socket is fitted for use with optional 35mm poles and loudspeaker stands. Two recessed flush handles are provided for easy lifting and carrying and four rubber feet are fitted to the bottom of the cabinet. A grey powder-coated perforated steel mesh grille protects the drivers from damage.

M10 rigging points are provided on the top and rear of the cabinet to enable it to be suspended and angled in permanent installations using shoulder eyebolts. M8 rigging points are provided on

TXD series manual page 6

user manual

TXD series

the rear of the cabinet for use with Turbosound wall and ceiling brackets. Two Neutrik Speakon NL4MP speaker connectors are located on the rear panel, providing input and parallel connections to additional TXD series cabinets or bass enclosures.

TXD-151

The TXD-151 is a trapezoidal passive two-way loudspeaker enclosure designed for use in a wide variety of live sound, fixed installation and mobile DJ applications that require professional sound quality in an easily transportable format.

It consists of a 15” reflex-loaded low frequency driver and a 1” high frequency compression driver on a 70ºH x 40ºV dispersion HF horn in an optimally tuned trapezoidal enclosure. These highgrade components are matched with an internal second order passive crossover network to ensure a seamless transition between the HF and LF drivers.

The crossover incorporates a two stage thermal overload protection system which prevents damage to the high frequency driver, reacting instantly to large transient peaks while still allowing wide dynamic range to be maintained. Although the protection system is transparent at normal operating levels, as the level increases the signal is gradually and imperceptibly compressed once the critical threshold has been reached.

The cabinet is constructed from 15mm (5/8”) birch plywood, screwed and glued together for maximum rigidity. A pole mount socket is fitted for use with optional 35mm poles and loudspeaker stands. Two recessed flush handles are provided for easy lifting and carrying and four rubber feet are fitted to the bottom of the cabinet. A grey powder-coated perforated steel mesh grille protects the drivers from damage.

M10 rigging points are provided on the top and rear of the cabinet to enable it to be suspended and angled in permanent installations using shoulder eyebolts. M8 rigging points are provided on the rear of the cabinet for use with Turbosound wall and ceiling brackets. Two Neutrik Speakon NL4MP speaker connectors are located on the rear panel, providing input and parallel connections to additional TXD series cabinets or bass enclosures.

TXD-252

The TXD-252 is a trapezoidal active/passive full range loudspeaker enclosure, designed for use in a wide variety of live sound, DJ and fixed installation applications.

It consists of two 500 watt (program) 15” low frequency drivers and a 3” coil compression driver on a rotatable 80°H x 50°V Converging Elliptical Waveguide™, in an optimally tuned birch plywood cabinet.

Two Speakon NL4MP speaker connectors are provided on the rear panel for input and link connections when used in passive mode, as well as a third switchable Speakon which is used to bypass the passive crossover when the cabinet is operated in bi-amplified mode. The internal

TXD series manual page 7

user manual

TXD series

passive crossover network also protects the high frequency compression driver from being overdriven.

The TXD-252 is ideal live music in bars and pubs, or for installing as a permanent system for pubs and clubs. It can be suspended vertically, or horizontally with the HF horn rotated, using the M10 rigging points. Due to the trapezoidal cabinet shape it can be positioned close to a ceiling where space is limited.

TXD-115

The TXD-115 is a front-loaded low frequency loudspeaker enclosure designed to give bass and sub-bass reinforcement to TXD series 2-way enclosures in a wide variety of live sound applications, as well as in fixed installations ranging from cafes, pubs, bars and restaurants to retail stores and houses of worship.

It consists of a reflex-loaded 15” low frequency driver in an optimally tuned rectangular enclosure. The TXD-115 includes a low-pass crossover network which filters high frequency signals from the bass driver when used in conjunction with 2-way enclosures such as the TXD-121 or TXD-151, enabling a full range system to be powered from a single amplifier channel without the need for external electronic crossovers.

The enclosure is fitted with internal M10 threaded rigging points on the top and rear, which allow single cabinets to be suspended and angled in fixed installations using optional M10 shoulder eyebolts.

The cabinet is constructed from 15mm (5/8”) birch plywood, and is finished in a durable semi-matt textured TurboBlue™ paint. Two flush handles are provided on the sides for easy lifting and carrying, and four rubber feet are fitted to the bottom of the cabinet. Two Neutrik Speakon NL4MP connectors provide input and parallel connections to additional TXD series cabinets.

TXD-215

The TXD-215 is a front-loaded low frequency loudspeaker enclosure designed to give bass and sub-bass reinforcement to TXD series 2-way enclosures in a wide variety of live sound applications, as well as in fixed installations ranging from cafes, pubs, bars and restaurants to retail stores and houses of worship.

It consists of two reflex-loaded 15” low frequency drivers in an optimally tuned rectangular enclosure. The TXD-215 includes a low-pass crossover network which filters high frequency signals from the bass driver when used in conjunction with 2-way enclosures such as the TXD-121 or TXD-151, enabling a full range system to be powered from a single amplifier channel without the need for external electronic crossovers.

The cabinet is constructed from 15mm (5/8”) birch plywood, screwed and glued together for maximum rigidity. Pole mount sockets are fitted on the top and sides of the cabinet to enable full range cabinets to be mounted on optional 35mm poles. When used in a horizontal format the two side-mounted pole mounts allow two TXD series enclosures to be mounted on top of a single

TXD series manual page 8

user manual

TXD series

bass cabinet to provide wider horizontal dispersion. Four recessed flush handles are provided for easy lifting and carrying and the cabinet is pre-drilled for optional T4 wheels. A grey powdercoated perforated steel mesh grille protects the drive units from damage.

M10 rigging points are provided on the top and rear of the cabinet, which allow single cabinets to be suspended and angled in fixed installations using optional M10 shoulder eyebolts.

Two Neutrik Speakon NL4MP connectors are located on the rear panel, providing input and parallel connections to additional TXD series cabinets.

TXD-118

The TXD-118 is a front-loaded low frequency loudspeaker enclosure designed to give bass and sub-bass reinforcement to TXD series 2-way enclosures in a wide variety of live sound applications, as well as in fixed installations ranging from cafes, pubs, bars and restaurants to retail stores and houses of worship.

It consists of a front-loaded 18” low frequency driver in a birch plywood enclosure, optimally tuned for extended low frequency response. The TXD-118 includes a low-pass crossover network which filters high frequency signals from the bass driver when used in conjunction with 2-way enclosures such as the TXD-121 or TXD-151, enabling a full range system to be powered from a single amplifier channel without the need for external electronic crossovers

The enclosure is fitted with internal M10 threaded rigging points on the top and rear, which allow single cabinets to be suspended and angled in fixed installations using optional M10 shoulder eyebolts. A pole mount socket is fitted to the top of the cabinet to enable two-way enclosures to be mounted on 35mm poles.

The cabinet is constructed from 15mm (5/8”) birch plywood, and is finished in a durable semi-matt textured TurboBlue™ paint. Two flush handles are provided on the sides for easy lifting and carrying, and four rubber feet are fitted to the bottom of the cabinet. Two Neutrik Speakon NL4MP connectors provide input and parallel connections to additional TXD series loudspeakers.

TXD-218

The TXD-218 is a front-loaded low frequency loudspeaker enclosure designed to give bass and sub-bass reinforcement to TXD series 2-way enclosures in a wide variety of live sound applications, as well as in fixed installations ranging from cafes, pubs, bars and restaurants to retail stores and houses of worship.

It consists of two front-loaded 18” low frequency drivers in a birch plywood enclosure, optimally tuned for extended low frequency response. The TXD-218 includes a low-pass crossover network which filters high frequency signals from the bass driver when used in conjunction with 2-way enclosures such as the TXD-121 or TXD-151, enabling a full range system to be powered from a single amplifier channel without the need for external electronic crossovers

TXD series manual page 9

user manual

TXD series

The enclosure is fitted with internal M10 threaded rigging points on the top and rear, which allow single cabinets to be suspended and angled in fixed installations using optional M10 shoulder eyebolts.

The cabinet is constructed from 15mm (5/8”) birch plywood, and is finished in a durable semi-matt textured TurboBlue™ paint. Two flush handles are provided on the sides for easy lifting and carrying. Two Neutrik Speakon NL4MP connectors provide input and parallel connections to additional TXD series loudspeakers.

TXD-12M

The TXD-12M is a compact passive two-way wedge monitor enclosure designed for use in a wide variety of live sound, fixed installation and mobile DJ applications that require professional sound quality in an easily transportable format.

It consists of a 12” reflex-loaded low frequency driver and a 1” high frequency driver on a 40ºH x 70ºV dispersion HF horn in an optimally tuned enclosure. These high grade components are matched with a third order passive crossover network to ensure a seamless transition between the HF and LF devices.

The crossover network incorporates a two-stage thermal overload protection system which prevents damage to the high frequency driver, reacting instantly to large transient peaks while still allowing wide dynamic range to be maintained. Although the protection system is transparent at normal operating levels, as the level increases the signal is gradually and imperceptibly compressed once the critical threshold has been reached.

The cabinet is constructed from 15mm (5/8”) birch plywood, screwed and glued together for maximum rigidity. Its symmetrical shape allows the monitor to be inverted and used as left/right mirror image pairs.

In addition to its primary function as a floor monitor, the TXD-12M is also suitable for front-of- house applications and can be used with the integral pole mount socket on top of optional 35mm poles and loudspeaker stands. Two recessed flush handles are provided for easy lifting and carrying, and eight rubber feet are fitted. A grey powder-coated perforated steel mesh grille protects the drive units from damage.

A Neutrik Speakon NL4MP connector is located at each end of the cabinet on recessed panels, providing input and parallel link connections to additional TXD series monitors.

TXD-15M

The TXD-16M is a switchable passive/biamp two-way wedge monitor enclosure designed for use in a wide variety of live sound, fixed installation and mobile DJ applications that require professional sound quality in an easily transportable format.

It consists of a 15” reflex-loaded low frequency driver and a 1” high frequency driver on a 40ºH x 70ºV dispersion HF horn in an optimally tuned enclosure. These high grade components are

TXD series manual page 10

Loading...
+ 22 hidden pages