Tripp Lite B126-004, B126-110, B126-1P0-WP-1, B126-1A0-WP-1, B126-002 User Manual
...
Warranty |
FREE.com/warranty |
|||
Registration:win |
Lite |
|||
|
|
|
for |
|
|
online |
today Tripp |
|
|
register |
to |
.tripplite |
|
|
www |
|
|
||
chance |
— |
|
|
|
product |
|
|
|
|
Owner’s Manual
Package Contents |
2 |
Product Features |
2 |
Mounting Instructions |
7 |
Standard Extender Kit Installation |
8 |
Extender Kit with Remote/Repeater Installation |
10 |
Standard Extender/Splitter Installation |
13 |
Extender/Splitter with Remote/Repeater Installation |
16 |
Extender/Splitter Daisy-Chain Installation (B126-004 only) |
20 |
Extender/Splitter Daisy-Chain with Remote/Repeater |
23 |
Installation (B126-004 only) |
|
Warranty & Warranty Registration |
27 |
1111 W. 35th Street, Chicago, IL 60609 USA www.tripplite.com/support
Copyright © 2011 Tripp Lite. All rights reserved.
1
201109206-93-3023-EN.indd 1 |
10/24/2011 10:01:17 AM |
Package Contents
|
1A1 |
1A1-WP |
002 |
004 |
1A0 |
1A0-WP-1 |
1P0 |
1P0-WP-1 |
110 |
|
|
B126- |
B126- |
B126- |
B126- |
B126- |
B126- |
B126- |
B126- |
B126- |
|
|
|
|
|
|
|
|
|
|
|
|
Local Unit (L), Remote Unit (R), |
B |
B |
L |
L |
R |
R |
R |
R |
R |
|
or Both (B) |
||||||||||
|
|
|
|
|
|
|
|
|
||
External Power Supplies |
2 |
2 |
1 |
1 |
1 |
1 |
0 |
0 |
1 |
|
(0, 1, or 2) |
||||||||||
|
|
|
|
|
|
|
|
|
||
Mounting Hardware |
X |
|
X |
X |
X |
|
|
|
X |
|
Wallplate Screws |
|
X |
|
|
|
X |
|
X |
|
|
Screwdriver for |
X |
X |
|
|
X |
X |
|
|
X |
|
Equalization Adjustment |
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
||
HDMI Daisy-chain Cable |
|
|
|
X |
|
|
|
|
|
Product Features
All
•Support a maximum video resolution of 1080p (60Hz)
•Plug-and-play; no software or drivers required
•Support up to 7.1 channel surround sound audio
•HDCP and 3D compatible
2
201109206-93-3023-EN.indd 2 |
10/24/2011 10:01:17 AM |
Product Features
B126-1A1
•HDMI over Cat5 Active Extender Kit (Box-style)
•Extends a 1080i (60Hz) signal up to 200 ft. from the source, or a 1080p (60Hz) signal up to 150 ft. from the source
•Features an additional HDMI port on the local transmitter unit for the connection of local monitor
•Remote receiver unit features a built-in Equalization control for video image adjustment
•Includes mounting hardware that allows both the local transmitter and remote receiver units to be wallmounted, rackmounted or pole mounted
B126-1A1-WP
•HDMI over Cat5 Active Extender Wallplate Kit
•Extends a 1080i (60Hz) signal up to 200 ft. from the source, or a 1080p (60Hz) signal up to 150 ft. from the source
•Remote receiver unit features a built-in Equalization control for video image adjustment
•RJ45-style wallplates allow for the use of standard Cat5e/6 patch cables; 110 punchdown connection not required
B126-002
•2-Port HDMI over Cat5 Extender/Splitter Local Transmitter Unit
(Box-style)
•Splits an HDMI signal into 2
•Works with remote/repeater and receiver units to extend an HDMI signal past the 16 ft. (5 m) distance limitation
•Includes mounting hardware that allows unit to be wallmounted, rackmounted or pole mounted
3
201109206-93-3023-EN.indd 3 |
10/24/2011 10:01:17 AM |
Product Features
B126-004
•4-Port HDMI over Cat5 Extender/Splitter Local Transmitter Unit
(Box-style)
•Splits an HDMI signal into 4
•Features an additional HDMI port, which can be used to connect a local monitor or to daisy-chain additional B126-004 units.
Up to 3 B126-004 units can be daisy-chained together to increase the number of connected monitors.
•Works with remote/repeater and receiver units to extend an HDMI signal past the 16 ft. (5 m) distance limitation
•Includes mounting hardware that allows unit to be wallmounted, rackmounted or pole mounted.
•Up to 3 B126-004 units can be mounted in a B132-004-RB 1U rackmount bracket
B126-1A0
•HDMI over Cat5 Active Extender Remote Receiver Unit (Box-style)
•Works with B126-002 and B126-004 extender/splitters to extend a 1080i (60Hz) signal up to 200 ft. from the source, or a 1080p (60Hz) signal up to 150 ft. from the source
•Features a built-in Equalization control for video image adjustment
•Includes mounting hardware that allows the unit to be wallmounted, rackmounted or pole mounted
4
201109206-93-3023-EN.indd 4 |
10/24/2011 10:01:17 AM |
Product Features
B126-1A0-WP-1
•HDMI over Cat5 Active Extender Wallplate
•Works with B126-002 and B126-004 extender/splitters to extend a 1080i (60Hz) signal up to 200 ft. from the source, or a 1080p (60Hz) signal up to 150 ft. from the source
•Features a built-in Equalization control for video image adjustment
•RJ45-style wallplate allows for the use of standard Cat5e/6 patch cables; 110 punchdown connection not required
B126-1P0
•HDMI over Cat5 Passive Extender Remote Receiver Unit (Box-style)
•Works with B126-002 and B126-004 extender/splitters to extend a 1080i (60Hz) signal up to 100 ft. from the source, or a 1080p (60Hz) signal up to 50 ft. from the source
•Features a built-in HDMI cable; a separate HDMI cable is not required
•No external power required
B126-1P0-WP-1
•HDMI over Cat5 Passive Extender Wallplate
•Works with B126-002 and B126-004 extender/splitters to extend a 1080i (60Hz) signal up to 100 ft. from the source, or a 1080p (60Hz) signal up to 50 ft. from the source
•RJ45-style wallplate allows for the use of standard Cat5e/6 patch cables; 110 punchdown connection not required
•No external power required
5
201109206-93-3023-EN.indd 5 |
10/24/2011 10:01:17 AM |
Product Features
B126-110
•HDMI over Cat5 Active Extender Remote/Repeater Unit (Box-style)
•Extends and expands Tripp Lite HDMI over Cat5 installation, allowing multiple monitors to be located at different points in a chain of up to
700 ft.
•Extends a 1080i (60Hz) signal up to 175 ft., or a 1080p (60Hz) signal up to 125 ft. from the local transmitter unit to the first remote/ repeater unit in the installation
•Extends a 1080i (60Hz) signal up to an additional 175 ft., or a 1080p (60Hz) signal up to an additional 125 ft. from each remote/ repeater unit to the next unit in the chain. In a full 4 level daisychain installation, a 1080i (60Hz) signal can be extended up to 700 ft., or a 1080p (60Hz) signal up to 500 ft. from the source to the last remote unit in the chain.
•Connect up to 4 remote units (3 remote/repeaters and 1 receiver), with a monitor located at each point in the chain
•Features a built-in Equalization control for video image adjustment
•Includes mounting hardware that allows the unit to be wall-mounted, rack-mounted or pole-mounted
Optional Accessories:
•B132-004-RB 1U Rackmount Bracket
•N202-Series Cat6 24AWG, solid wire patch cables
•P568-Series High-Speed HDMI cables
6
201109206-93-3023-EN.indd 6 |
10/24/2011 10:01:17 AM |
Mounting Instructions (select models only)
The B126-002, B126-004, B126-1A1, B126-1A0 and B126-110 come with mounting hardware that allows them to be mounted in a variety of ways. The following images show the different ways the included mounting brackets can be attached for different mounting methods. Note: The B126-004 can also be mounted to a Tripp Lite
B132-004-RB 1U Rackmount Bracket. Up to 3 B126-004 local units can be connected to a B132-004-RB.
Wallmount
19” Rackmount Pole Mount
7
201109206-93-3023-EN.indd 7 |
10/24/2011 10:01:19 AM |
Standard Extender Kit Installation
Notes:
1)Test to make sure the entire installation works properly before pulling cables through ceilings/walls.
2)To achieve maximum distance and performance, use 24 AWG solid wire Cat5e/6 cable. Using stranded wire Cat5e/6 cable, or cable with a gauge (AWG) size higher than 24 AWG, will result in shorter extension distance. Higher gauge cabling, such as 26 AWG, has a more limited transmission capability than lower gauge cabling. All Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid wire cabling.
3)The B126-1A1 and B126-1A1-WP are set to transmit a stereo audio signal by default. Press the Audio button on the local unit to switch to 7.1-channel surround-sound audio.
4)The installation diagram shows a B126-1A1 unit. The B126-1A1-WP installation is the same, except there is no local monitor port.
OPTIONAL LOCAL
MONITOR
BLU-RAY
LOCAL REMOTE
TRANSMITTER RECEIVER 
Up to 200 ft. at 1080i (60Hz)
Up to 150 ft. at 1080p (60Hz)
8
201109206-93-3023-EN.indd 8 |
10/24/2011 10:01:20 AM |
Standard Extender Kit Installation
1Make sure the HDMI source is powered OFF.
2Connect the HDMI source to the INPUT port on the B126-1A1 or B126-1A1-WP local unit using a Tripp Lite P568-Series HDMI Cable.
3Optional for B126-1A1: Connect a local monitor to the LOCAL port on the B126-1A1 local unit using a Tripp Lite P568-Series HDMI
Cable.
4Connect the external power supply to the local unit and plug it into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU) or Uninterruptible Power Supply (UPS). The green LED illuminates to indicate the unit is receiving power from the external power supply.
5Using Cat5e/6 cable, connect the RJ45 port on the local unit to the RJ45 port on the remote unit.
6Connect the external power supply to the remote unit and plug it into a Tripp Lite Surge Suppressor, PDU or UPS. The green LED illuminates to indicate the unit is receiving power from the external power supply. The orange LED illuminates to indicate the unit is connected to a powered ON local unit.
7Connect the remote unit’s HDMI port to a monitor using a Tripp Lite
P568-Series HDMI Cable.
8Turn on the power to the HDMI source. The orange LED on the local unit illuminates to indicate a signal is being received from the source.
9If necessary, use the Equalization control on the remote unit to adjust the video image. Note: An improper Equalization setting can cause the monitor not to display a picture at all. Try each Equalization setting until an acceptable picture is displayed.
9
201109206-93-3023-EN.indd 9 |
10/24/2011 10:01:20 AM |
Loading...