TRENDnet Pan-Tilt Internet Camera Server User Manual

Size:
3.67 Mb
Download

PREFACE

The Pan/Tilt Internet Camera Server (TV-IP410) /WirelessPan/Tilt Internet Camera Server(TV-IP410W)providesreal-timesecurity surveillance over a large viewing area. Monitor people in your camera’s viewing field and manage the camera from any Internet connection.

See more with one Internet camera—remotelypan the camera side-to-sidea remarkable 330 degrees and tiltup-and-down105 degrees.

The TV-IP410/TV-IP410Wprovides high quality video streams over a secure or wireless connection. Advanced intuitive software includes motion detection recording, email alerts and scheduled recordings. This camera’s brilliant image quality, pan and tilt functionality and low light recording capabilities make it ideal for home, small office and business use.

Chapter 1 Introduction to Your Camera describes the features of the camera. You will also know the components and functions of the camera.

Chapter 2 Hardware Installation helps you install the camera according to your application environment. You can use this camera at home, at work, at any where you want.

Chapter 3 Accessing the Camera lets you start using your camera without problem. The camera can be set up easily and work within your network environment instantly.

Chapter 4 Configuring the Camera guides you through the configuration of the camera using the Web browser on your PC.

Chapter 5 SecurView Softwae using the convenience software to monitor your camera

- 1 -

Chapter 6 Appendix provides the specification of the camera and some useful information for using your camera.

NOTE The illustrations and configuration values in this guide are for reference only. The actual settings depend on your practical application of the camera.

- 2 -

 

Contents

 

PR E F A C E .................................................................

1

CH A P T E R 1 ..............................................................

5

IN T R O D U C T I O N ..........................................................

5

1.1

PACKAGE CONTENTS ...........................................................

5

1.2

GETTING TO KNOW YOUR CAMERA......................................

6

1.3

FEATURES AND BENEFITS....................................................

8

1.4

SYSTEM REQUIREMENT .......................................................

9

CHAPTER 2 .............................................................

10

HARDW ARE INSTALL ATION ..........................................

10

2.1

INSTALLING THE WALL MOUNT KIT....................................

10

2.2

CONNECTING THECAMERA TOLAN/WLAN.....................

11

2.3

APPLICATIONS OF THE CAMERA ........................................

12

CHAPTER 3 .............................................................

13

ACCESSI NG THE CAMERA ...........................................

13

3.1

USING IPSETUP..................................................................

13

3.2

ACCESSING TO THE CAMERA.............................................

18

3.3

CONFIGURING THEIP ADDRESS OF THEPC.....................

23

CHAPTER 4 .............................................................

24

CONFIGURI NG THE CAMERA ........................................

24

4.1

USING THE WEB CONFIGURATION.....................................

24

4.2

USING SMART WIZARD.......................................................

25

4.3

BASIC SETUP ......................................................................

29

4.4

NETWORK SETTINGS..........................................................

33

4.5

PAN/TILT SETTINGS ...........................................................

40

4.6

SETTING UP VIDEO .............................................................

41

4.7

EVENT SERVER CONFIGURATION......................................

44

4.8

MOTION DETECT ................................................................

47

4.9

EVENT CONFIG ...................................................................

48

4.10

TOOLS.................................................................................

54

4.11

INFORMATION .....................................................................

56

CHAPTER 5 .............................................................

57

SECUR VI EW ™ SOFTW ARE ..........................................

57

- 3 -

5.1

INSTALLATION .....................................................................

57

5.2

USING INSTALLATION .........................................................

62

ITEM FEATURES ...........................................................................

62

TO ADD A CAMERA .......................................................................

68

TO REMOVE A CAMERA................................................................

71

TO LINK TO THEWEB PAGE OF THE CAMERA..............................

72

TO RECORD VIDEO.......................................................................

73

TO CONFIGURE THE RECORDING SETTINGS...............................

77

TO PLAYBACK THE RECORDED VIDEO .........................................

79

TO SET UP MOTION DETECTION OPTIONS ...................................

80

ACCOUNT .....................................................................................

82

OTHER .........................................................................................

82

INFORMATION...............................................................................

83

AP P E N D I X ...............................................................

85

A.1

SPECIFICATION ...................................................................

85

A.2

GPIO TERMINAL APPLICATION ..........................................

87

A.3 GLOSSARY OF TERMS..........................................................

88

- 4 -

CHAPTER1

INTRODUCTION

1.1 Package Contents

The package includes the following:

5TV-IP410orTV-IP410WCamera

5CD-ROM(User’s Guide and Utility)

5Multi-LanguageQuick Installation Guide

5External Antenna (for TV-IP422Wonly)

5GPIO Connector

5RJ-45Cable

512V 1.5A Power Adapter (3.5mm)

5Wall Mount Kit

NOTE: If there is item missing, please contact your local authorized dealer.

- 5 -

1.2 Getting to Know Your Camera

Adjustable LEDs rotate the lens to have clear image.

Antenna for TV-IP410W only

Power LED

Link LED

indicates the

indicates the

camera’s network

camera is powered

connectivity with the

on with the steady

flashing green light.

amber light.

 

Front View

- 6 -

Ethernet Cable Connector

Connecto to network by using the RJ-45Cable. It also support the NWay protocol.

GPIO Connectors

It is used to connect the external device.

External Antenna

Connects the external antenna.

DC Power Connector connects the AC power adapter, in order to supply power to the camera.

Reset Button

Press it quickly to restart the camera. Press and hold for 5 seconds to set to factory default.

Rear View

- 7 -

1.3 Features and Benefits

MJPEG Supported

The camera provides you with excellent MJPEG images technology, allowing you to adjust image size and quality, and bit rate according to the networking environment.

Optimal Viewing

With the pan/tile functions, you can easily monitor everywhere via the camera by moving the camera lens to the left/right (165/165 degrees) or up/down (90/15 degrees). In addition, you can assign up to eight positions for the camera, enabling you to move the camera lens to the desired position quickly.

I/O Connectors Provided

The camera provides the I/O connectors on the rear panel (IN/OUT), which provide the physical interface to send and receive digital signals to a variety of external alarm devices. You can connect a special featured device, and then configure the settings and control the device from the GPIO Trigger window of Web Configuration.

Remote Control Supported

By using a standard Web browser or the bundled SecurView software application, the administrator can easily change the configuration of the camera via Intranet or Internet. In addition, the camera can be upgraded remotely when a new firmware is available. The users are also allowed to monitor the image and take snapshots via the network.

Multiple Platforms Supported

The camera supports multiple network protocols, including TCP/IP, SMTP e-mail,HTTP, and other Internet related protocols. Therefore, you can use the camera in a mixed operating system environment, such as Windows 2000 and Windows XP and Windows Vista.

Multiple Applications Supported

Through the remote access technology, you can use the cameras to monitor various objects and places for your own purposes.

For example, babies at home, patients in the hospital, office, banks,

-8 -

and more. The camera can capture both still images and video clips, so that you can keep the archives and restore them at any time.

1.4 System Requirement

Networking

LAN:

10Base-TEthernet or100Base-TXFast Ethernet.

WLAN:

IEEE 802.11b/g.

Accessing the Camera using Web Browser

Platform:

Microsoft® Windows® 2000/XP/Vista

CPU:

Intel Pentium III 800MHz or above

RAM:

512MB

Resolution:

800x600 or above

User Interface:

Microsoft® Internet Explorer 6.0 or above

Accessing the Camera using SecurView®

Platform: Microsoft® Windows® 2000/XP/Vista Hardware Requirement:

1 camera connected: Intel Pentium III 800MHz; 512MB RAM

2 ~ 4 cameras connected: Intel Pentium 4 1.3GHz; 512MB RAM 5 ~ 8 cameras connected: Intel Pentium 4 2.4GHz; 1GB RAM

9 ~ 16 cameras connected: Intel Pentium 4 3.4GHz; 2GB RAM Resolution: 1024x768 or above

NOTE: Monitoring multiple cameras may require a high performance CPU. To have the better performance, it recommends that you set the camera video resolution and frame rate to low level.

- 9 -