TRENDnet Outdoor PoE Megapixel Day-Night Internet Camera User Manual

Size:
4.66 Mb
Download

TRENDnet User’s Guide

Cover Page

TRENDnet User’s Guide

 

Contents

 

Product Overview .................................................................................

2

Package Contents .............................................................................................................

2

Features............................................................................................................................

2

Product Hardware Features .............................................................................................

2

Application Diagram.........................................................................................................

3

Installation ...........................................................................................

4

Hardware Installation.......................................................................................................

4

Camera Installation ..........................................................................................................

5

Configuration........................................................................................

8

Viewing Camera Basic Function .......................................................................................

8

Configuring the Camera Setting .....................................................................................

10

System............................................................................................................................

11

NETWORK.......................................................................................................................

13

AUDIO/VIDEO SETTING ..................................................................................................

25

EVENT CONFIGURATION ................................................................................................

29

Factory Default ...................................................................................

33

How to Access the IP camera via IP Installer ........................................

34

How to setup/access the camera behind a Router ...............................

35

Technical Specifications ......................................................................

38

Troubleshooting .................................................................................

40

© Copyright 2014 TRENDnet. All Rights Reserved.

Table of Contents

i

TRENDnet User’s Guide

Product Overview

TV-IP302PI

Package Contents

TV-IP302PI

Multi-LanguageQuick Installation Guide

CD-ROM(Utility, Software & User's guide)

Power adapter (12V DC. 1A) (1.5M / 5 ft.)

Network cable (1.5 M/ 5 ft.)

RJ-45coupler

Camera Mounting hardware

Features

The Outdoor Megapixel PoE Day / Night Internet Camera, model TV-IP302PI,provides powerful megapixel night vision in complete darkness for up to 15 meters (50 feet). This camera is outdoor ready with an IP66 weather rated housing. The compact aluminum enclosure, a mere 4 inches long (10 cm), comes with an adjustable sun visor.

TV-IP302PI

Product Hardware Features

Camera Overview

Shield

IR Lens

Camera Stand

Shield: It is used to protect the camera for the inclement weather.

IR Lens: IR lens for the camera.

Camera Stand: the mounting stand to hold the camera.

© Copyright 2014 TRENDnet. All Rights Reserved.

2

TRENDnet User’s Guide

TV-IP302PI

Application Diagram

Camera Connectors

Speaker

GPIO

Ethernet /PoE

Microphone

BNC

Power

Out

 

Port

Port

In

Video Out

Connector

 

 

Power Connector: Connects the power adapter to supply power to the camera if usingnon-PoEconnection

BNC Video Out: Connect a CRT monitor or handheld monitor.

Microphone In: Connects an external microphone to receive theon-the-spotsound where the camera is installed.

Ethernet/PoE Port: Plugs the network cable to connect to your local area network (LAN). If you are using the PoE, you must have the network cable connect to your PoE switch or PoE Injector.

GPIO Port: Connect external device. Please refer to I/O setting paragraph. It's also used for IP camera reset. Please refer to Factory Default paragraph.

Speaker Out: Connects an external audio device (such as the active speaker) to deliver sound via the camera.

© Copyright 2014 TRENDnet. All Rights Reserved.

3

TRENDnet User’s Guide

 

TV-IP302PI

Installation

2.

Once both notches are aligned with the shield, slide th4e shield forward.

 

 

Hardware Installation

Shield Installation

1.Align the notches on the sides of the IP camera to the shield.

3. Adjust the IP camera to fit the shield.

© Copyright 2014 TRENDnet. All Rights Reserved.

4

TRENDnet User’s Guide

Bracket Installation

1.Turn and lock the bracket into the mounting hole of IP camera. Use screws to fix the bracket to ceiling or wall, and turn the knob tightly to fix the angle of camera.

LED Indicator

The green LED will be flash when power on the camera and if there is the data transmission.

LED

Waterproofing

The camera is designed featuring waterproof. However, you need to protect the connectors from water soak. For example, you can tape the junction points of the connectors while you connect the cables or purchase a weatherproof cable/power cord protector.

TV-IP302PI

Camera Installation

1.Insert the Installation CD-ROMinto your computer’sCD-ROMdrive to initiate theAuto-Runprogram. Click the Install Camera.

2.Write down the MAC ID of the camera.

© Copyright 2014 TRENDnet. All Rights Reserved.

5

TRENDnet User’s Guide

3.Plug in and connect the power adapter to the camera. If you are using the PoE to supply power to the camera, please skip to the next step. Click Next when you are done.

4.Connect a network cable to the camera’s network port and then to your router.

If you are using PoE, please ensure the cable is connected to a PoE switch or PoE injector.

TV-IP302PI

5.Wait while camera is searching.

6.The founded cameras will show on the screen. The camera already selected by default if you have only one camera installed. If you have more than one camera in the same Network, you will need to identify the camera by the MAC ID. Click

Next.

© Copyright 2014 TRENDnet. All Rights Reserved.

6

TRENDnet User’s Guide

7.Select "DHCP" option to assign an IP by DHCP server or Select "Fixed IP" to set IP address manually. Click Next.

8.If you select "Fixed IP", fill out the IP address, subnet mask, default gateway, DNS server. Please ensure that the IP address of the camera and the computer must within the same network. Click Next.

TV-IP302PI

9.Type in the Password. The default password is “admin”. You must change the default password of the camera. Enter the default password: admin and enter the new password. The password must be between 8 and 32 characters. (Alphanumeric: a-z,A-Z,0-9),and confirm the new password by entering the password twice.

10.Click “here” to access to the camera’s web page or clickNext. It is recommended that you access the IP camera now if it was using a DHCP connection.

© Copyright 2014 TRENDnet. All Rights Reserved.

7

TRENDnet User’s Guide

11.Click Finish to exit the program or clickHome to return to the main screen. This device also supports the Mobile App. Using your mobile device to scan the QR code to install the App.

TV-IP302PI

Configuration

Viewing Camera Basic Function

Open the Web browser on your computer (example showed in this User’s Guide is based on the Internet Explorer). In the Address bar, type the IP address you got from "Camera Installation" chapter or found by IP Installer, and then press [Enter].

When the login window appears, enter the User name (admin) and Password and press OK to access to the main screen of the camera’s Web Configuration.

Note: if you are initially access to the camera, you will be prompted to install a new plug-infor the camera. Permission request depends on the Internet security settings of your computer. ClickAllow andInstall to process.

© Copyright 2014 TRENDnet. All Rights Reserved.

8

TRENDnet User’s Guide

After you login into the live screen of the camera, the main page will appear as below:

 

    

The live screen of the IP camera configuration provides you with many useful information and functions, including:

SETUP : Click the button to configure the camera.

SNAPSHOT: Click the button to take a snapshot. The snapshot will pop up another window for your review first. Click disk iconto save the snapshot at the desire destination.

System Information: It shows current system Date, Time, Video Resolution, and Video Refreshing Rate.

Digital Zoom: The drop down menu has 3 images size available, 1/2x, 1x and 2x. The default is 1/2x.

Streaming Profile: Use the drop down menu to select Streaming 1 & Streaming 2 video. (If the streaming 2 setting is closed on “AUDIO/VIDEO SETTING >> Video”,

this option will not appear)

TV-IP302PI

Speaker/Microphone: Click the "Mic" to speak out through the camera. Click the “Speaker” to receive theon-sidesound and voice from the camera.

Online Visitor: It shows how many people connect to this IP camera.

Relay On: Click the Relay out "ON" to trigger the relay output for testing. click "Off" to stop triggering. To switch between these two types of relay out, please

refer to page 32 of the GPIO Setting session.

One the live view video, right click the mouse for the additional menu options.

Snapshot: Save a JPEG picture

Record Start: Record the video in the local PC. It will ask you where to save the video. To stop recording,right-clickthe mouse again. Select “Record Stop”. The video format is AVI. Use Microsoft Media Player to play the recorded file.

Mute: Turn off the audio. Click again to turn on it.

The "mute" button does not affect the playback recording video. As long as the "2-WayAudio" option in the audio setting is enabled, all the audio will be recorded into the playback video even you click "mute" in the live page.

Full Screen:Full-screenmode.

© Copyright 2014 TRENDnet. All Rights Reserved.

9