TRENDnet Multi-Function Printer User Manual

Size:
889.73 Kb
Download

Quick Installation Guide

TE100-MP1UN

H/W: V1.0R

Table of Contents

English .......................................................................................................................................................

1

1.

Before You Start ................................................................................................................................

1

2.

How to Install .....................................................................................................................................

2

3.

Printing ..............................................................................................................................................

7

4.

Faxing ...............................................................................................................................................

8

5.

Scanner .............................................................................................................................................

9

Troubleshooting ...........................................................................................................................................

10

Version 09.16.08

1. Before You Start

Package Contents

?TE100-MP1UN

?UtilityCD-ROM

?Multi-LanguageQuick Installation

Guide

?Power Adapter (5V, 2A)

System Requirements

?CD-ROMDrive

?CPU: 300Mhz or above/ 800Mhz or above (Windows Vista)?Memory: 256MB RAM or above/ 512MB RAM or above (Window Vista)?Windows 2000/XP/2003 Server/Vista (32bit)

Note:

1.Do not perform the following unless instructed to do so:

1.Install the utility

2.Connect printer to Print Server

3.Connect computer to Print Server

2.The utility must be installed on each computer in order to use your multifunction printer.

Application

1-PortMulti-FunctionPrint Server

(TE100-MP1UN)

Internet

Cable/DSL

Modem

4-PortGigabit Firewall Router

(TWG-BRF114)

Multi-Functional

Workstations with Fast Ethernet Adapter

USB 2.0 Printer

(TE100-PCIWN)

1

English

2. How to install

1.Install the printer drivers to your computer. Then power down the printer and disconnect the printer from your computer.

Note: Please refer to your printer's manual for printer installation instructions.

2.Insert the Utility CD-ROMinto yourCD-ROMdrive.

3.Click Run Autorun.exe(Windows

Vista only).

4. Click Install Utility. Then click Setup Wizard.

5.Connect the USB Printer to the USB port on the Print Server. Then clickOK.

2

English

6.Connect a RJ-45network cable from a Switch/Router to theLAN port of the Print Server.

7.Connect a RJ-45network cable from a Switch/Router to the Ethernet port on your computer and then clickOK.

8.Power ON your printer and then

click OK.

9.Connect the AC Power Adapterto the Print Server and then to a power outlet. Then click OK.

10.Verify the Status LED is on and the Error LED if off on the Print Server. Then clickYes.

3

English

11.Select the print server and then click Next.

12.Configure the IP address of the print server to be in the same subnet as your network and then click Next.

13.Copy down the IP address and then click Next.

14. Click Finish.

4

English

15. Click Yes.

16.Click Next and then follow the

InstallShield Wizard instructions.

17. Click Finish.

18.Click on Resource and then click

Connect.

5

English

19.The printer driver wizard appears. Follow the printer driver wizard to install the printer.

20.Click OK.

Print Server configuration is now complete.

For detailed information regarding the TE100-MP1UN configuration and advanced settings, please refer to the User's Guide on the UtilityCD-ROMor TRENDnet's website at www.trendnet.com

Register Your Product

To ensure the highest level of customer service and support, please take a moment to register your product Online at: www.TRENDnet.com/register

Thank you for choosing TRENDnet

6

English

3. Printing

Note: Only one user can use the print server at a time. Once a user has finished using the print server, another user can use it.

1.Click on Resource and then click

Connect.

2.Status will now show the client computer and IP address that is currently using the printer.

3.User can now start printing.

4.Click Disconnect.

7

English

4. Faxing

Note: Only one user can use the print server at a time. Once a user has finished using the print server, another user can use it.

1.Click on Resource and then click

Connect.

2.Status will now show the client computer and IP address that is currently using the printer.

3.User can now start Faxing. Follow the Multifunction printer software instructions for faxing.

4.Click Disconnect.

8

English