TRENDnet 21000BASE-T User Manual

Size:
497 Kb
Download

System Events: Monitoring the system’s trap.Device Bootup: a trap when booting up the system.

Illegal Login: a trap when there is using a wrong password login, and it will record from where the IP to be login.

Fiber Port Events: Monitoring the Fiber port status.

Link Up/Link Down: a trap when there is linking status happens in fiber port.

Abnormal* Receive Error: a trap when there are receive data error in fiber port.

Abnormal* Transmit Error: a trap when there are transmit data error in fiber port.

Copper Port Events: Monitoring the copper port status.

Abnormal* Receive Error: a trap when there are receive data error in copper port.

Abnormal* Transmit Error: a trap when there are transmit data error in copper port.

Abnormal*: 50 error packet count within 10 seconds.

Set Password

Password is the invaluable tool for the manager to secure Web Management Switch, use this function to change the password.

If you forget the password, press the “Reset” button in the rear panel of the Switch, the current setting includes VLAN, Port Setting… etc. will be lost and the Switch will restore to the default setting.

35

Figure 27. Set Password

Backup Setting

The backup tools help you to backup the current setting of the Switch. Once you need to backup the setting, press the “Backup” button to save the setting.

To restore a current setting file to the device, you must specify the backup file and press “Restore” button to proceed the setting of the recorded file.

Figure 28. Backup Setting

Note: when restoring a recorded file, the current password will not be erased.

36

Reset Setting

The Factory Reset button helps you to reset the device back to the default setting from the factory. Be aware that the entire configuration will be reset, the IP address of the device will be set to default setting 192.168.0.1.

Figure 29. Reset Setting

Logout

When press this function, the web configuration will go back to first Login page.

Figure 30. Logout

37

TECHNICAL SPECIFICATIONS

 

General

 

 

 

 

Standards

IEEE 802.3 10BASE-TEthernet

 

IEEE 802.3u 100BASE-TXFast Ethernet

 

IEEE 802.3ab 1000BASE-TGigabit Ethernet

 

IEEE 802.3x Full Duplex Flow Control

 

 

Protocol

CSMA/CD

 

 

Data Transfer Rate

Ethernet: 10Mbps (half duplex), 20Mbps (full-duplex)

 

Fast Ethernet: 100Mbps (half duplex), 200Mbps (full-duplex)

 

Gigabit Ethernet: 2000Mbps (full-duplex)

 

 

Topology

Star

 

 

Network Cables

10BASET: 2-pairUTP Cat. 3, 4, 5; up to 100m

 

100BASE-TX:2-pairUTP Cat. 5; up to 100m

 

1000BASE-T:4-pairUTP Cat. 5; up to 100m

 

Fiber module: mini-GBICFiber module

 

 

Number of Ports

24 × 10/100Mbps Auto-MDIXRJ45 ports

 

2 × 10/100/1000Mbps Auto-MDIXRJ45 ports

 

2 × mini-GBICfiber slot

 

 

 

Physical and Environmental

 

 

 

 

AC inputs

100-240VAC,50-60Hz internal universal power supply

 

 

Power Consumption

19Watts (Max)

 

 

Temperature

Operating: 0° ~ 40° C, Storage:-10° ~ 70° C

 

 

Humidity

Operating: 10% ~ 90%, Storage: 5% ~ 90%

 

 

Dimensions

440 x 200 x 44 mm (W x H x D)

 

 

EMI:

FCC Class A, CE Mark Class A, VCCI Class A

 

 

Safety:

cUL(UL60950), CB(IEC60950)

 

 

39

 

 

 

Performance

 

 

 

 

 

 

 

 

 

 

Transmits Method:

Store-and-forward

 

 

 

 

 

 

 

Filtering

Address

4K entries per device

 

 

Table:

 

 

 

 

 

 

 

 

 

 

 

 

Packet

 

10Mbps Ethernet: 14,880/pps

 

 

Filtering/Forwarding

100Mbps Fast Ethernet: 148,800/pps

 

 

Rate:

 

 

 

 

1000Mbps Gigabit Ethernet: 1,488,000/pps

 

 

 

 

 

 

 

 

 

 

 

MAC

Address

Automatic update

 

 

Learning:

 

 

 

 

 

 

 

 

 

 

 

Transmits Method:

Store-and-forward

 

 

 

 

 

 

 

RAM Buffer:

 

768K bytes per device

 

 

 

 

 

 

40