Toshiba MW20FP1, MW24FP1, MW 27FP1 User Manual

4.5 (2)

DIGITAL VIDEO

COMBINATION FLAT COLOR TELEVISION AND VIDEO CASSETTE RECORDER / DVD VIDEO PLAYER

MW20FP1

MW24FP1

MW27FP1

OWNER’S MANUAL

Introduction

Connections

Basic setup

TV operation

Playback

(VCR)

Recording

(VCR)

Other functions (VCR)

Basic playback (DVD)

Advanced playback (DVD)

Function setup (DVD)

Others

2

13

18

23

33

38

42

44

47

56

60

Illustration of MW20FP1

©2004 Toshiba Corporation

This device does not tape-record copy protected DVD video discs.

5L00201C [E]Cover

1

20/4/04, 16:04

Introduction

IMPORTANT SAFEGUARDS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's

enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the distance between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with the FCC (Federal Communications Commission) Rules could void the user's authority to operate this equipment.

COPYRIGHT: It is permissible to record television programs, films, video tapes and other material only in the event that third party copyrights and other rights are not violated.

CAUTION:

THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM.

TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS OWNER'S MANUAL CAREFULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LO- CATION-SEE SERVICE PROCEDURE.

USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE ENCLOSURE. VISIBLE LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED. DO NOT STARE INTO BEAM.

Location of the required Marking

The rating sheet and the safety caution are on the rear of the unit.

VHF/UHF

OUT PUT

LINE 1 IN

 

 

 

VIDEO

VIDEO

 

DIGITAL AUDIO

 

 

L

L

 

COAXIAL AUDIO

AUDIO

 

R

R

CERTIFICATION: COMPLIES WITH

FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J.

2

5L00201C [E]p02-05

2

 

20/4/04, 16:04

 

 

 

 

 

1.READ INSTRUCTIONS

All the safety and operating instructions should be read before the unit is operated.

2.RETAIN INSTRUCTIONS

The safety and operating instructions should be retained for future reference.

3.HEED WARNINGS

All warnings on the unit and in the operating instructions should be adhered to.

4.FOLLOW INSTRUCTIONS

All operating and use instructions should be followed.

5.CLEANING

Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning the exterior cabinet only.

6.ATTACHMENTS

The manufacturer of this unit does not make any recommendations for attachments, as they may cause hazards.

7.WATER AND MOISTURE

Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet

basement, or near a swimming pool.

8.ACCESSORIES

Do not place this unit on an unstable cart, stand, tripod, bracket, or table.

The unit may fall, causing serious injury, and serious damage to the unit.

8A. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

9. VENTILATION

PORTABLE CART WARNING (symbol provided by RETAC)

Slots and openings in the cabinet back or bottom are provided for ventilation,

S3126A

and to ensure reliable operation of the unit, and to protect it from overheating.

These openings must not be blocked or covered. The openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

10.POWER SOURCE

This unit should be operated only from the type of power source indicated on the rating plate. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For units intended to operate from battery power, or other sources, refer to the respective pages on this Owner's Manual for their operating instructions.

11.GROUNDING OR POLARIZATION

This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Instead of the polarized alternating-current line plug, your unit may be equipped with a 3-wire grounding-type plug (a plug having a third (grounding) pin). This plug will only fit into a grounding-type power outlet. This too, is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet.

Do not defeat the safety purpose of the grounding-type plug.

12.POWER-CORD PROTECTION

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

Introduction

3

5L00201C [E]p02-05

3

 

20/4/04, 16:04

 

 

 

 

 

Introduction

IMPORTANT SAFEGUARDS (Continued)

13.LIGHTNING

To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.

14.POWER LINES

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall onto or against such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.

15.OVERLOADING

Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.

16.OBJECT AND LIQUID ENTRY

Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.

17.OUTDOOR ANTENNA GROUNDING

If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the National Electrical Code (NEC), ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

18.SERVICING

Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

For example:

a.When the power-supply cord or plug is damaged.

b.If liquid has been spilled, or objects have fallen into the unit.

c.If the unit has been exposed to rain or water.

d.If the unit does not operate normally by following the operating instructions. Adjust only those

controls that are covered by the operating instructions, as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the

unit to its normal operation.

e.If the unit has been dropped or the cabinet has been damaged.

f.When the unit exhibits a distinct change in performance, this indicates a need for service.

19.REPLACEMENT PARTS

When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock or other hazards.

20.SAFETY CHECK

Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.

21.HEAT

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

22.DISC TRAY

Keep your fingers well clear of the disc tray as it is closing. It may cause serious personal injury.

23.CONNECTING

When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's manual of the other equipment carefully and follow the instructions when making any connections.

24.SOUND VOLUME

Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high volume sound may cause hearing or speaker damage.

25.SOUND DISTORTION

Do not allow the product output distorted sound for a longtime. It may cause speaker overheating and fire.

26.HEADPHONES

When you use the headphones, keep the volume at a moderate level. If you use the headphones continu-

4

ously with high volume sound, it may cause hearing damage.

 

5L00201C [E]p02-05

4

 

20/4/04, 16:04

 

 

 

 

 

27. LASER BEAM

Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the laser beam. It may cause sight damage.

28. DISC

Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious

Introduction

personal injury and product malfunction.

 

 

 

 

 

 

 

 

 

 

 

29. NOTE TO CABLE TV SYSTEM INSTALLER

 

 

 

 

 

 

This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the NEC that

 

provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be con-

 

nected to the grounding system of the building, as close to the point of cable entry as practical.

 

EXAMPLE OF ANTENNA GROUNDING AS PER THE

 

NATIONAL ELECTRICAL CODE

 

 

 

 

 

 

 

 

 

 

ANTENNA LEAD

 

GROUND

 

 

 

 

IN WIRE

 

 

 

 

 

 

 

 

 

CLAMP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ANTENNA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DISCHARGE UNIT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(NEC SECTION 810-20)

 

ELECTRIC SERVICE

 

 

 

 

 

 

 

 

GROUNDING CONDUCTORS

 

 

 

 

 

 

 

 

 

 

EQUIPMENT

 

 

 

 

 

 

 

 

(NEC SECTION 810-21)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GROUND CLAMPS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

POWER SERVICE GROUNDING

 

NEC-NATIONAL ELECTRICAL CODE

 

 

 

 

 

 

 

ELECTRODE SYSTEM

 

 

 

 

 

 

 

 

 

S2898A

 

 

(NEC ART 250, PART H)

 

 

 

 

 

 

 

IMPORTANT RECYCLING INFORMATION

This product uses both Cathode Ray Tube (CRT) and other components that contain lead. In your community there might be regulations that require you to dispose these materials properly under environmental considerations. Please contact your local authorities, or the Electronic Industries Alliance (http://www.eiae.org) for disposal or recycling information.

Power source

AC Outlet

Wider Hole

and Blade

Polarized AC Cord Plug

(One blade is wider than the other.)

TO USE AC POWER SOURCE

Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet.

Notes:

Never connect the AC line cord plug to other than the specified voltage (120V 60Hz). Use the attached power cord only.

If the polarized AC cord does not fit into a non-polarized AC outlet, do not attempt to file or cut the blade. It is the user’s responsibility to have an electrician replace the obsolete outlet.

If you cause a static discharge when touching the unit and the unit fails to function, simply unplug the unit from the AC outlet and plug it back in. The unit should return to normal operation.

If the AC cord plug is plugged in for the first time, wait for approx. 5 seconds before pressing the POWER button.

5

5L00201C [E]p02-05

5

 

20/4/04, 16:04

 

 

 

 

 

Introduction

Precautions

Notes on handling

Notes on moisture condensation

When shipping the unit, the original shipping carton and packing materials come in handy. For maximum protection, repack the unit as it was originally packed at the factory.

Do not use volatile liquids, such as insect spray, near the unit. Do not leave rubber or plastic products in contact with the unit for a long time. They will leave marks on the finish.

The top and rear panels of the unit may become warm after a long period of use. This is not a malfunction.

When the unit is not in use, be sure to remove the disc and the video cassette turn off the power.

If you do not use the unit for a long period, the unit may not function properly in the future. Turn on and use the unit occasionally.

Notes on locating

Place the unit on a level surface. Do not use it on a shaky or unstable surface such as a wobbling table or inclined stand. The loaded disc or the video tape may come off the proper position and cause damage to the unit.

When you place this unit near a TV, radio, or VCR, the playback picture may become poor and the sound may be distorted. In this case, place the unit away from the TV, radio, or VCR.

Notes on cleaning

Use a soft, dry cloth for cleaning.

For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a dry cloth to wipe it dry.

Do not use any type of solvent, such as thinner and benzine, as they may damage the surface of the unit. If you use a chemical saturated cloth to clean the unit, follow that product’s instructions.

To obtain a clear picture

The unit is a high technology, precision device. If the video head, the head drum, the optical pick-up lens and disc drive parts are dirty or worn down, the picture quality becomes poor. To obtain a clear picture, we recommend regular inspection and maintenance (cleaning or parts replacement) every 1,000 hours of use depending on the operating environment. For details, contact your nearest dealer.

Moisture condensation damages the unit. Please read the following carefully.

Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day. Drops of water form on the outside of the glass. In the same way, moisture may condense on the head drum or the optical pick-up lens inside this unit, one of the most crucial internal parts of the unit.

 

 

 

le of m

ois

 

 

mp

 

a

 

 

tu

re

Ex

 

 

e

 

 

 

nd nsatio

Tape

 

co

 

n!

Head drum

Moisture condensation occurs during the following cases.

When you bring the unit directly from a cold place to a warm place.

When you use the unit in a room where you just turned on the heater, or a place where the cold wind from the air conditioner directly hits the unit.

In summer, when you use the unit in a hot and humid place just after you move the unit from an air conditioned room.

When you use the unit in a humid place.

Do not use the unit when moisture condensation may occur.

If you use the unit in such a situation, it may damage discs and internal parts. Remove the disc or the video tape, connect the power cord of the unit to the wall outlet, turn on the unit, and leave it for two or three hours. After two or three hours, the unit will have warmed up and evaporated any moisture. Keep the unit connected to the wall outlet and moisture condensation will seldom occur.

Wait!

Wall outlet

6

5L00201C [E]p06-12

6

 

20/4/04, 16:04

 

 

 

 

 

Notes on discs

On handling discs

Do not touch the playback side of the disc.

Playback side

Do not attach paper or tape to discs.

On cleaning discs

Fingerprints and dust on the disc cause picture and sound deterioration. Wipe the disc from the center outwards with a soft cloth. Always keep the disc clean.

If you cannot wipe off the dust with a soft cloth, wipe the disc lightly with a slightly moistened soft cloth and finish with a dry cloth.

Do not use any type of solvent such as thinner, benzine, commercially available cleaners or antistatic spray for vinyl LPs. It may damage the disc.

On storing discs

Do not store discs in a place subject to direct sunlight or near heat sources.

Do not store discs in places subject to moisture and dust such as a bathroom or near a humidifier. Store discs vertically in a case. Stacking or placing objects on discs outside of their case may cause warping.

Structure of disc contents

 

 

 

Introduction

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Audio CDs are divided into tracks.

 

 

 

 

 

 

 

 

 

 

 

Normally, DVD video discs are divided into titles, and

 

the titles are sub-divided into chapters. Video CDs and

 

DVD video disc

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVD video disc

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Title 1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Title 2

 

 

 

 

 

 

 

 

 

Chapter

 

 

 

 

 

 

Chapter 1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 Chapter 2

 

 

Chapter 2 Chapter 3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Video CD/Audio CD

Video CD/Audio CD

Track 1

Track 2

Track 3

Track 4

Track 5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Each title, chapter or track is assigned a number, which is called “title number”, “chapter number” or “track number” respectively.

There may be discs that do not have these numbers.

Notes on copyright

It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, and rent copyrighted material without permission.

This device does not tape-record copy protected DVD Video Discs.

The device is not to be used for copying copyrighted content without the express written permission of the copyright owner.

Obtaining such permission is the sole responsibility of the user.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

7

5L00201C [E]p06-12

7

 

20/4/04, 16:04

 

 

 

 

 

Introduction

Notes on discs (Continued)

About this owner’s manual

This owner’s manual explains the basic instructions of this unit. Some DVD video discs are produced in a manner that allows specific or limited operation during playback. As such, the unit may not respond to all operating commands. This is not a defect in the unit. Refer to instruction notes of discs.

“ ” may appear on the TV screen during operation. A “ ” means that the operation is not permitted by the unit or the disc.

For example, sometimes it is unable to stop the playback of copyright message of the disc when the STOP (3) button is pressed. Alternatively, the “ ” may also indicate that the feature is not available for the disc.

Notes on region numbers

The region number of this unit is 1. If region numbers, which stand for their playable area, are printed on your DVD video disc and you do not find 1 or ALL , disc

playback will not be allowed by the player. (In this case, the unit will display a message on-screen.)

On Video CDs

This DVD supports Video CDs equipped with the PBC (Version 2.0) function. (PBC is the abbreviation of Playback Control.) You can enjoy two playback variations depending on types of discs.

Video CD not equipped with PBC function (Version 1.1)

Sound and movie can be played on this DVD in the same way as an audio CD.

Video CD equipped with PBC function (Version 2.0)

In addition to operation of a Video CD not equipped with the PBC function, you can enjoy playback of interactive software with search function by using the menu displayed on the TV screen (Menu Playback). Some of the functions described in this owner’s manual may not work with some discs.

Playable discs

This unit can play the following discs.

 

Disc Mark

Contents

Disc

Maximum

 

Size

playback time

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Approx. 4 hours

 

 

 

 

 

(single sided disc)

 

 

 

Audio

12 cm

 

 

 

 

Approx. 8 hours

 

 

 

 

 

 

 

+

 

DVD

 

 

 

(double sided disc)

 

 

Video

 

video

 

 

 

 

 

 

(moving

 

 

discs

 

 

 

Approx. 80 minutes

 

 

pictures)

 

 

 

 

 

 

(single sided disc)

 

 

 

 

8 cm

 

 

 

 

 

Approx. 160 minutes

 

 

 

 

 

 

 

 

 

 

(double sided disc)

 

 

 

 

 

 

 

 

 

Audio

12 cm

Approx. 74 minutes

 

 

 

 

 

Video

 

 

+

 

 

 

 

Video

 

 

CDs

 

 

 

 

DIGITAL VIDEO

(moving

 

 

 

 

 

 

pictures)

 

 

 

 

 

8 cm

Approx. 20 minutes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12 cm

Approx. 74 minutes

Audio

 

 

Audio

 

 

CDs

 

 

8 cm

 

 

 

 

 

 

 

 

 

(CD

Approx. 20 minutes

 

 

 

 

single)

 

 

 

 

 

 

 

The following discs are also available.

CD-R/CD-RW discs of CD-DA, Video CD, MP3, WMA or JPEG format

Kodak Picture CD and FUJICOLOR CD format Some of these discs may be incompatible.

You cannot play discs other than those listed above.

You cannot play discs of DVD-RAM, DVD-ROM, Photo CD, etc., or non standardized discs even if they may be labeled as above.

Some CD-R/RWs can not be played back depending on the recording conditions.

This unit uses the NTSC color system, and cannot play DVD video discs recorded in any other color system (PAL, SECAM, etc.).

8

5L00201C [E]p06-12

8

 

20/4/04, 16:04

 

 

 

 

 

Contents

 

Introduction

 

IMPORTANT SAFEGUARDS ...........................

2

Precautions ......................................................

6

Notes on discs ..................................................

7

Contents ...........................................................

9

Identification of controls .................................

10

Connections

 

Antenna connections ......................................

13

Cable TV connections ....................................

14

Connecting to optional equipment ..................

15

Basic setup

 

Starting setup .................................................

18

Clock setting ...................................................

19

Setting the language ......................................

22

TV/VCR operation status ...............................

22

TV operation

 

TV operation ...................................................

23

Closed captions ..............................................

25

To memorize channels ...................................

26

Setting the V-Chip ..........................................

27

To set the on timer ..........................................

29

To set the off timer ..........................................

30

Picture control adjustment ..............................

31

Adjusting the picture preference ....................

31

Sound control adjustment ..............................

32

Stereo and Second Audio Program (SAP) .....

32

Playback (VCR)

 

Loading and unloading a cassette tape .........

33

Cassette tape playback ..................................

34

Special playback ............................................

35

Convenient function .......................................

36

Recording (VCR)

 

Recording a TV program ................................

38

One-touch Timer Recording (OTR) ................

39

Timer recording ..............................................

40

Other functions (VCR)

 

Duplicating a video tape .................................

42

Recording a DVD/CD disc ..............................

43

Basic playback (DVD)

 

Playing a disc .................................................

44

Advanced playback (DVD)

 

Zooming .........................................................

47

Locating desired scene ..................................

47

Repeat playback.............................................

48

A-B Repeat playback......................................

48

Program playback ..........................................

49

Random playback...........................................

49

Changing angles ............................................

50

Title selection .................................................

50

DVD menu ......................................................

50

Changing soundtrack language .....................

51

Subtitles .........................................................

51

Karaoke playback...........................................

52

Disc status......................................................

52

To turn off the PBC ........................................

52

MP3/WMA/JPEG CD operation .....................

53

Function setup (DVD)

 

Customizing the function settings ..................

56

Temporary disabling of rating level

 

by DVD disc ...................................................

59

Others

 

Language code list .........................................

60

Reception disturbances ..................................

61

Troubleshooting .............................................

62

Specifications .................................................

64

Limited warranty .............................................

65

Introduction

9

5L00201C [E]p06-12

9

 

20/4/04, 16:04

 

 

 

 

 

Introduction

Identification of controls

See the page in for details.

This owner’s manual uses the illustrations of MW20FP1. MW27FP1 model has some differences in appearance from the illustrations. Example: Model MW27FP1 has a door on the front panel.

Front panel

Illustration of MW20FP1

Cassette loading slot

33

TIMER REC indicator

40

 

Remote sensor

12

Disc tray 44

*PHONES jack 24

 

 

 

POWER button

*AUDIO (L/R)/VIDEO IN (LINE IN 2) jacks

42

 

 

SKIP

button

46

REW (Rewind) button

34

 

 

 

 

PLAY button 44

 

STOP/EJECT button

33

POWER

 

 

 

STOP button 44

 

PLAY button

34

indicator 19

 

 

 

 

 

 

 

FF (Fast Forward) button

34

REC/OTR

SKIP

button

46

REC/OTR button

38

VOLUME ▲/▼ buttons 23

indicator

38

CHANNEL ▲/▼ buttons

24

OPEN/CLOSE button 44

 

 

Model MW27FP1 has a door on the front panel. Please open it to access the *PHONES jack and the *AUDIO (L/R)/VIDEO IN (LINE IN 2) jacks.

Rear panel

 

 

 

 

 

 

 

VHF/UHF

 

 

 

 

 

 

DIGITAL AUDIO

 

 

 

 

VHF/UHF

OUT PUT

LINE 1 IN

 

 

 

 

 

 

 

 

 

VIDEO

VIDEO

 

RF IN (VHF/UHF) jack

14

 

DIGITAL AUDIO

 

 

 

L

L(MONO)

 

 

 

 

COAXIAL

AUDIO

 

 

 

 

AUDIO

 

 

 

 

R

R

 

AC power cord

5

 

 

 

 

COAXIAL DIGITAL AUDIO OUT jack 16

AUDIO (L/R)/VIDEO IN (LINE 1 IN) jacks 42

 

 

 

 

 

AUDIO (L/R)/VIDEO OUT jacks 15

10

 

 

 

 

 

5L00201C [E]p06-12

10

 

 

 

20/4/04, 16:04

Toshiba MW20FP1, MW24FP1, MW 27FP1 User Manual

Remote control

The instructions in this manual describe the functions on the remote control. See the page in for details.

DVD button 44

TV/VCR button 19

Direct channel

selection buttons (0-9) 23 Number buttons (0-9) 27

DISPLAY button 22

SLEEP button 24

AUDIO SELECT button 32 REC buttons 36

TIMER REC buttons 40 PLAY button 34 44

REV button 34 46

CM SKIP button 35 JUMP button 47

COUNTER RESET button 36 ANGLE button 50

SP/SLP button 38 RETURN button 56

MENU button 19 SETUP button 56

Direction buttons 18 ( / //)

CANCEL/CLEAR button 18

*DVD MENU button

Use the MENU button to display the menu included on many DVD video discs. To operate a menu, follow the instructions in “DVD menu”. 50

TV/VCR

DVD

POWER

POWER button 18

 

 

 

 

1

2

3

 

CHANNEL

/

buttons 24

 

 

 

CHANNEL

MUTE button 24

 

4

5

6

 

 

7

8

9

 

VOLUME

/

buttons 23

DISPLAY

 

MUTE

VOLUME

CLOSED CAPTION button 25

 

0

 

 

 

AUDIO

CHANNEL

CLOSED

SKIP

button 46

SLEEP

 

 

 

 

SELECT

RETURN

CAPTION

 

 

 

 

TIMER

SKIP

SKIP

SLOW button 35

46

REC

SLOW

 

 

 

 

REC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CHANNEL RETURN button 24

 

 

 

 

SKIP

button 46

 

PLAY

 

STOP button 34

44

 

 

 

 

FWD button 34

46

REV

 

 

FWD

 

 

 

 

 

 

 

 

PAUSE/STILL button 35

CM SKIP/JUMP

PAUSE/STILL

ZERO RETURN button 37

 

STOP

 

SUBTITLE button 51

 

 

 

 

 

 

 

 

PROGRAM button 29

 

COUNTER

ZERO

INPUT

REPEAT A-B button 48

SP/SLP

RESET

RETURN

SELECT

RETURN

ANGLE

SUBTITLE

ZOOM

INPUT SELECT button 42

MENU

 

PROGRAM

D.TRACKING

 

 

 

 

 

 

 

 

ZOOM button 47

SETUP

 

REPEAT A-B

TOP MENU

 

 

 

 

 

ENTER

 

TRK +

D.TRACKING button 35

 

 

 

 

CANCEL

 

 

TRK -

TOP MENU button 50

 

 

 

DVD MENU

 

 

 

 

CLEAR

 

 

PLAY MODE

TRK + button 35

 

*DVD MENU button 50

TRK – button 35

PLAY MODE button 48

ENTER button 18

Introduction

11

5L00201C [E]p06-12

11

 

20/4/04, 16:04

 

 

 

 

 

Introduction

Identification of controls (continued)

Inserting batteries

1 Slide the battery compartment cover in the direction of the arrow.

Battery precautions:

Install two “R03/AAA” batteries

3

Replace the compartment

(supplied), paying attention to the

cover.

2 polarity diagram in the battery

 

compartment.

The precautions below should be followed when using batteries in this device:

1.Use only the size and type of batteries specified.

2.Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device. To avoid a potential short circuit, insert the “–” end first.

3.Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.

4.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

5.Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)

Remote control basics

Press POWER to turn the unit on or off.

Select your desired operating mode (TV/VCR or DVD) using TV/VCR or DVD.

Tap CHANNEL or to move through the channels one channel at a time.

The Direction buttons (// / ) are also used to navigate on-screen menu system.

You can directly access specific channels using Direct channel selection buttons.

Illustration of MW20FP1

Operation:

Aim the remote control at the remote sensor and press control buttons to operate.

Operate the remote control within 30° angle on either side of the remote sensor, up to a distance of approx. 5 meters.

Approx. 5 meters

12

5L00201C [E]p06-12

12

 

20/4/04, 16:04

 

 

 

 

 

Connections

Antenna connections

If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV service (CABLE), see page 14 for Cable TV connections.

Combination VHF/UHF antenna (Single 75 ohm cable or 300 ohm twin-lead wire)

Antenna

Antenna

jack

jack

75 ohm coaxial cable (not supplied)

300-75 ohm matching transformer (supplied)

Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack.

If your combination VHF/UHF antenna has a 300 ohm twin-lead wire, the use of the 300-75 ohm matching transformer may be necessary.

Connections

Combination VHF/UHF antenna (Separate VHF and UHF 300 ohm twin-lead wires)

Antenna

jack

Combiner (not supplied)

UHF 300 ohm twin-lead wire

(not supplied)

300-75 ohm matching transformer (supplied)

VHF 300 ohm twin-lead wire (not supplied)

Connect the UHF 300 ohm twin-lead wire to the combiner (not supplied). Connect the VHF 300 ohm twin-lead wire to the 300-75 ohm matching transformer. Attach the transformer to the combiner, then attach the combiner to the antenna jack.

Separate VHF/UHF antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)

Antenna

jack

VHF 75 ohm (not supplied)

Combiner (not supplied)

UHF 300 ohm twin-lead wire

(not supplied)

Connect the VHF 75 ohm cable and UHF 300 ohm twin-lead wire to the combiner (not supplied). Attach the combiner to the antenna jack.

13

5L00201C [E]p13-17

13

 

20/4/04, 16:04

 

 

 

 

 

Connections

Cable TV connections

This unit has an extended tuning range and can tune most cable channels without using a Cable TV converter box. Some cable companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company.

For subscribers to basic cable TV service

Antenna

jack

75 ohm coaxial cable

For basic cable service not requiring a converter/descrambler box, connect the Cable TV 75 ohm coaxial cable directly to the Antenna jack on the back of the unit.

For subscribers to scrambled cable TV service

If you subscribe to a cable TV service which requires the use of a converter/descrambler box, connect the incoming 75 ohm coaxial cable to the converter/descrambler box. Using another 75 ohm coaxial cable, connect the output jack of the converter/descrambler box to the antenna jack on the unit. Follow the connections shown below. Set the unit to the output channel of the converter/descrambler box (usually channel 3 or 4) and use the converter/descrambler box to select channels.

Incoming

 

 

Antenna

75 ohm

 

 

 

75 ohm cable to

jack

Cable TV

Converter/

the unit

 

 

descrambler

 

 

For subscribers to unscrambled basic cable TV service with scrambled

premium channels

If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the use of a converter/descrambler box, you may wish to use a signal splitter and an A/B Switch box (available from the cable company or an electronics supply store). Follow the connections shown below. With the switch in the “B” position, you can directly tune any nonscrambled channels on your unit. With the switch in the “A” position, tune your unit to the output of the converter/descrambler box (usually channel 3 or 4) and use the converter/descrambler box to tune scrambled channels.

Incoming

Converter/

 

 

 

descrambler

 

 

Antenna

75 ohm

 

 

75 ohm cable to

 

 

jack

Cable TV

A/B switch

A

the unit

 

Splitter

B

 

 

 

 

 

14

5L00201C [E]p13-17

14

 

20/4/04, 16:04

 

 

 

 

 

Connecting to optional equipment

Before connecting the unit to other equipment, be sure to turn off the power and

INPUT SELECT

unplug all of the equipment from the wall outlet before making any connections.

You can enjoy the TV game, camcorder or high quality dynamic sounds of DVD

 

video discs or audio CDs by connecting the unit to optional audio equipment.

 

Using the audio/video inputs

Press INPUT SELECT repeatedly to select the desired mode.

“LINE1”, “LINE2” or TV channel will display on the screen for 4 seconds.

 

TV Channel

 

LINE1

 

LINE2

 

LINE 1

 

 

 

 

 

 

(Back)

 

(Front)

 

 

 

 

 

 

 

 

 

 

Note: In the DVD mode this key will not operate.

Connections

Connecting a camcorder or a TV game

To playback from the camcorder or playing a TV Game, connect the camcorder to the unit as shown.

Signal flow

Illustration of MW20FP1

Camcorder

To AUDIO (L/R)/VIDEO OUT

Audio/Video cable (not supplied)

OR

 

 

(yellow)

(yellow)

 

(white)

 

 

(white)

To AUDIO (L/R)/VIDEO IN

(red)

(red)

(LINE IN 2)

 

 

 

TV GAME

Note: Model MW27FP1 has a door on the front panel. Please open it to access the AUDIO (L/R)/VIDEO IN (LINE IN 2) jacks.

Connecting to an audio system

Connect the unit to your audio system.

VHF/UHF

OUT PUT

LINE 1 IN

 

 

 

VIDEO

VIDEO

 

DIGITAL AUDIO

 

 

L

L

 

COAXIAL AUDIO

AUDIO

 

R

R

To ANALOG AUDIO OUT

Audio system

(white)

(white) Audio cable (not supplied)

 

(red)

 

 

(red)

 

To audio inputs of the amplifier

15

5L00201C [E]p13-17

15

 

20/4/04, 16:04

 

 

 

 

 

Connections

Connecting to optional equipment (Continued)

You can enjoy high quality dynamic sounds by connecting the

• This section uses the following reference mark.

unit to optional audio equipment.

 

 

: Front speaker

: Center speaker

 

 

 

 

 

 

: Rear speaker

: Signal flow

 

 

 

 

 

 

: Sub woofer

 

Connecting to an amplifier equipped with a Dolby Digital decoder

Dolby Digital

Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs with this dynamic realistic sound by connecting the unit to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark.

Amplifier equipped with a

VHF/UHF

Dolby Digital decoder

DIGITAL AUDIO

 

To COAXIAL

 

type digital

To COAXIAL DIGITAL

audio input

AUDIO OUT

 

75 Ω coaxial cable (not supplied)

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.

Connecting to an amplifier equipped with Dolby Surround Pro Logic

Dolby Surround Pro Logic

You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system (right and left front speakers, a center speaker, and one or two rear speakers).

3With an amplifier equipped with Dolby Digital

Connect the equipment the same way as described in “Connecting to an amplifier equipped with a Dolby Digital decoder.”

Refer to that amplifier’s owner’s manual and set the amplifier so you can enjoy Dolby Surround Pro Logic sound.

3With an amplifier not equipped with Dolby Digital

Connect the equipment as follows.

This connection is only suitable for Video CDs and Audio CDs.

*

Amplifier equipped with

VHF/UHF

 

Dolby Surround Pro Logic

DIGITAL AUDIO

 

To audio

 

 

input

To AUDIO (L/R) OUT

Audio cable (not supplied)

Connect one or two rear speakers. The output sound from the rear speakers will be monaural even if you connect two rear speakers.

Connecting to an amplifier equipped with a DTS decoder

Digital Theater Systems (DTS)

DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs. If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded sound tracks on DVD video discs or audio CDs.

Amplifier equipped with

VHF/UHF

a DTS decoder

DIGITAL AUDIO

To COAXIAL

 

type digital

To COAXIAL DIGITAL

audio input

AUDIO OUT

75 Ω coaxial cable (not supplied)

“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

16

5L00201C [E]p13-17

16

 

20/4/04, 16:04

 

 

 

 

 

Connecting to an amplifier equipped with a MPEG audio decoder

MPEG2 sound

You can enjoy motion picture and live concert DVD video discs with dynamic realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor.

Amplifier equipped with an

VHF/UHF

MPEG2 audio decoder

DIGITAL AUDIO

To COAXIAL

To COAXIAL DIGITAL

type digital

audio input

AUDIO OUT

75 Ω coaxial cable (not supplied)

Connecting to an amplifier equipped with a digital audio input

2 channel digital stereo

You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and speaker system (right and left front speakers).

Amplifier equipped with a

Digital audio input

To COAXIAL

 

type digital

To COAXIAL DIGITAL

audio input

AUDIO OUT

 

75 Ω coaxial cable (not supplied)

Notes:

VHF/UHF

DIGITAL AUDIO

DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the unit to the AC-3 RF input of a Dolby Digital Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO OUT jack of the unit.

Connect the COAXIAL DIGITAL AUDIO OUT jack of the unit to the “COAXIAL” input of a Receiver or Processor.

Refer to the owner’s manual of the connected equipment as well.

When you connect the unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.

The output sound of the unit has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.

Turn off the amplifier before you connect or disconnect the unit’s power cord. If you leave the amplifier power on, the speakers may be damaged.

Connections

17

5L00201C [E]p13-17

17

 

20/4/04, 16:04

 

 

 

 

 

Basic setup

Starting setup

POWER

The STARTING SETUP function makes installing your unit easily. It leads you the Language selection, TV/CABLE selection and auto channel memory automatically.

IMPORTANT: Make sure that the antenna or cable TV system connection

is made!

/

ENTER

Starting setup

1 Press POWER.

The starting setup function begins and the Language setup menu appears on the screen. Press or to select your desired language, then press ENTER.

POWER

LANGUAGE/IDIOMA/LANGUE

4 Now the “AUTO CH MEMORY” and “AUTO CLOCK”starts.

After the starting setup is completed, the TV channel appears on the screen.

AUTO CH MEMORY

ENGLISH

STOP : CANCEL

ESPAÑ OL

 

FRANCAIS

 

ENTER

2 Press or to select “TV” or “CABLE”, then press ENTER.

CHANNEL PLAN

TV

CABLE

AUTO CLOCK

STOP : CANCEL

ENTER

Press or to select “START”, then press 3 ENTER.

If you select “CANCEL” and press ENTER, the STARTING SETUP stops and changes to the TV screen.

AUTO SETUP

START

CANCEL

ENTER

Notes:

The starting setup function will work only when you press the

POWER button for the first time.

In “AUTO CLOCK” setting, it may take more than 10 minutes to read the EDS signal for one channel, which has only “Time of day” or “Local time zone”.

18

5L00201C [E]p18-21

18

 

20/4/04, 16:05

 

 

 

 

 

Clock setting

The auto clock function will automatically set the built-in clock (Month, Day, Year and Time) when the unit is connected to an antenna or cable system and it is turned off. As the unit searches for a receivable station in your area and it receives a broadcast signal for auto clock, the auto clock needs several minutes to set itself.

TV/VCR POWER

DISPLAY

MENU

// /

Auto clock setting

To set auto clock to OFF

Preparation:

Connect the antenna or cable system.

If you use a cable box, turn it on.

Plug the AC power cord to the AC outlet.

1Make sure the unit is turned off.

If you press POWER, the Auto Clock set is not effective.

2Wait at least three minutes and press POWER. Then press TV/VCR to select TV/VCR mode.

The POWER indicator will light.

POWER POWER

TV/VCR

3 Press DISPLAY to check the clock on the screen.

TV/VCR

 

8 : 47AM MON

CH 125

STEREO SAP

 

DISPLAY

00 : 00 : 00 SP

4 If the clock is not set, check the antenna condition. The Auto clock may not function properly if the reception condition is not good.

Auto clock adjustment

The Auto clock adjustment will be performed at 12:00 PM everyday if you turn off the unit.

If you use a cable box and you want Auto Clock adjust ment to be performed, the cable box must be left on.

The Auto Clock adjustment is not effective when there is a difference of more than 5 minutes exists between the built-in clock time and the actual time.

When shipped from factory the AUTO CLOCK is set to “ON”. But if you do not want auto clock set (Adjustment):

1 Press MENU, then press or to select option.

MENU

SETUP

 

CLOCK SET

 

 

ON/OFF TIMER

 

 

AUTO CLOCK

ON

ENTER

STANDARD TIME

 

DAYLIGHT

 

 

 

 

SAVING TIME

 

 

/ / / / MENU

 

2 Press or to select “AUT O CLOCK”.

 

CLOCK SET

 

 

ON/OFF TIMER

 

 

AUTO CLOCK

ON

ENTER

STANDARD TIME

 

 

 

 

DAYLIGHT

 

 

SAVING TIME

 

 

/ / / / MENU

 

3 Press or to select “OFF” .

 

CLOCK SET

 

 

ON/OFF TIMER

 

 

AUTO CLOCK

OFF

ENTER

STANDARD TIME

 

DAYLIGHT

 

 

 

 

SAVING TIME

 

 

/ / / / MENU

 

4 Press MENU repeatedly until the menu screen is cleared.

 

• When the AUTO CLOCK is set to

MENU

“OFF”, the Auto Clock adjustment

 

does not function.

SETUP

• Set the clock manually 21 .

 

Notes:

If the unit does not operate properly, or No key operation (by the unit and/or the remote control): Static electricity, etc., may affect the player's operation. Disconnect the AC power cord once, then connect it again.

The TV section has its own menu and also DVD section has its own menu 56 .

If no buttons are pressed for more than 60 seconds, the TV/VCR menu screen will return to normal TV operation automatically.

setup Basic

19

5L00201C [E]p18-21

19

 

20/4/04, 16:05

 

 

 

 

 

Basic setup

Clock setting (continued)

To set standard time

To set daylight saving time

In the rare event that you live within broadcast range of two stations in two different time zones, the unit may recognize the wrong station for the auto clock set.

To correct the situation:

You can set the Daylight saving time automatically or manually.

1

Press MENU, then press

or

to select

1

Press MENU, then press

or

to select

 

 

 

 

 

option.

 

 

 

 

option.

 

 

 

 

 

 

CLOCK SET

 

 

CLOCK SET

 

 

 

 

ON/OFF TIMER

 

 

ON/OFF TIMER

 

 

 

 

 

 

 

 

 

 

MENU

 

AUTO CLOCK

ON

MENU

AUTO CLOCK

ON

 

ENTER

 

 

 

 

STANDARD TIME

 

STANDARD TIME

 

 

 

 

 

 

 

ENTER

 

 

 

 

DAYLIGHT

 

 

DAYLIGHT

 

 

 

 

 

SAVING TIME

 

 

 

SAVING TIME

 

 

SETUP

 

 

 

 

SETUP

 

 

 

 

 

 

/

/ / / MENU

 

 

/

/ / / MENU

 

 

 

 

 

 

 

 

 

2 Press or to select “ST ANDARD TIME” , then press .

 

CLOCK SET

 

 

ON/OFF TIMER

 

 

AUTO CLOCK

ON

ENTER

STANDARD TIME

 

 

DAYLIGHT

 

 

SAVING TIME

 

 

/ / / MENU

 

Press // / to select your time zone, then 3 press ENTER.

ATLANTIC

: GMT–4hours

EASTERN

: GMT–5hours

CENTRAL

: GMT–6hours

MOUNTAIN

: GMT–7hours

PACIFIC

: GMT–8hours

ALASKA

: GMT–9hours

ENTER

: GMT–10hours

HAWAII

AUTO

: AUTO SET

(GMT: Greenwich Mean Time)

4 Press MENU repeatedly until the menu screen is cleared.

MENU

SETUP

Note:

To be able to select the standard time, the clock must first be set by “AUTO CLOCK” once.

20

2 Press or to select “DA YLIGHT SAVING TIME”, then press .

CLOCK SET

 

ON/OFF TIMER

 

AUTO CLOCK

ON

ENTER

 

STANDARD TIME

 

DAYLIGHT

 

SAVING TIME

 

/ / / MENU

 

3 Press or to select one of the options, then press ENTER.

DAYLIGHT SAVING TIME

ON

OFF

ENTER

AUTO

//ENTER/MENU

ON: for manual setting (forward one hour)

OFF: for manual setting (back one hour)

AUTO: for automatic setting (read EDS in the signal)

When you want to set the Daylight Saving Time manually, on the first Sunday in April you set to “ON”, and on the last Sunday in October you set to “OFF”.

4 Press MENU repeatedly until the menu screen is cleared.

MENU

SETUP

Notes:

When shipped from factory, the DAYLIGHT SAVING TIME is set to “AUTO” position.

When the clock is not set, Daylight Saving Time setting is not available.

When there is no Daylight Saving Time in your area, always select “OFF” position in step 3.

5L00201C [E]p18-21

20

 

20/4/04, 16:05

 

 

 

 

 

Manual clock setting

MENU

You must set the date and time manually for timer recordings,

ENTER

 

ON/OFF timer and daylight saving time if the auto clock

 

process did not set them correctly.

 

EXAMPLE: Setting the clock to “8:30 AM”, 27th. (SAT)

March, 2004.

1 Press MENU, then press or to select option.

 

 

CLOCK SET

 

 

 

ON/OFF TIMER

 

MENU

 

AUTO CLOCK

ON

ENTER

STANDARD TIME

 

 

 

 

 

DAYLIGHT

 

SETUP

 

SAVING TIME

 

 

 

 

 

 

/ / / / MENU

 

2 Press or to select “CLOCK SET”, then press .

 

CLOCK SET

 

 

ON/OFF TIMER

 

 

AUTO CLOCK

ON

ENTER

STANDARD TIME

 

 

DAYLIGHT

 

 

SAVING TIME

 

 

/ / / MENU

 

3 Press or to set the month, then press .

 

CLOCK SET

 

 

MONTH

3

 

DAY

1(MON)

ENTER

YEAR

2004

 

TIME

12:00AM

//// ENTER/MENU

Set the day, year and time as in step 4, then 4 press ENTER.

 

CLOCK SET

 

 

MONTH

3

 

DAY

27(SAT)

ENTER

YEAR

2004

 

TIME

8:30AM

//// ENTER/MENU

5 After setting the clock, date and time starts functioning automatically.

8:30 AM SAT

To make corrections any time during the process

Press or repeatedly until the item you want to change blinks, then set the item again.

Notes:

After a power failure or disconnection of the power, the timer settings will be lost. In this case, reset the present time.

When you set the minute, you can change in 10-minutes step by holding down or .

setup Basic

21

5L00201C [E]p18-21

21

 

20/4/04, 16:05

 

 

 

 

 

Loading...
+ 47 hidden pages