Toshiba 37WL58A, 37WL58T, 32WL58A, 37WL58E, 32WL58E User Manual

OWNER'S MANUAL

LCD Color TV

32WL58A

32WL58E

32WL58T

37WL58A

37WL58E

37WL58T

Owner's Record

You will find the model number and serial number on the back of the TV. Record these numbers in the spaces provided below. Refer to them whenever you call upon your TOSHIBA dealer regarding this product.

Model number:

Serial number:

Introduction

Basic operation Getting started

Features

Equipment	connections
	Referencesection

#01E01_32/37WL58AET

1

8/5/05, 3:43 PM

Black

Toshiba 32/37WL58AET (E)

Welcome to Toshiba

•Thank you for purchasing this Toshiba LCD Color Television. This manual will help you use the exciting features of your new TV.

•Instructions in this manual are based on using the remote control.

•You can also use the controls on the TV if they have the same name as those on the remote control.

•Please read all the safety and operating instructions carefully, and keep the manual for future reference.

Contents
Introduction
Important Safety Instructions .................................	3
Installation ...........................................................	3
Use .......................................................................	5
Service .................................................................	6
Cleaning .............................................................	7
Important information.............................................	7
Important information .......................................	7
Getting started
Installation ................................................................	8
Connecting an antenna ...................................	8
Exploring your new TV .............................................	9
Installing the remote control batteries ............	9
TV top, TV front ....................................................	9
TV back ...............................................................	10
Learning about the remote control ......................	11
Location of controls ...........................................	11
Turning the TV on, Selecting a language ..............	12
Switching on the TV ...........................................	12
Switching off the TV............................................	12
Selecting a language .......................................	12
Learning about the menu system .........................	13
Menu display chart ............................................	13
Programming channel memory ............................	14
System selection, Auto tuning ...........................	14
Manual tuning ....................................................	14
Program sorting ..................................................	16
Watching TV programs ...........................................	17
Volume, Sound mute, Changing program
positions, Program return, On-screen
information .........................................................	17
Basic operation
Viewing the wide-screen picture format .............	18
Picture size selection ..........................................	18
Picture position, Reset .............................................	19
Picture position adjustment ..............................	19
Reset (Picture position adjustment) .................	19
Picture quality adjustment .....................................	20
Picture quality adjustment ................................	20
To activate the black stretch ...........................	21
To activate the MPEG NR (Noise Reduction) ...	21
To activate the DNR
(Digital Noise Reduction) ..................................	21
To select the color temperature ......................	22
To use the cinema mode ..................................	22
To use the picture still .........................................	22
To adjust the color management ....................	23
To reset the base color adjustment .................	23
Sound adjustment ...................................................	24
MTS (Multi-channel TV Sound) setting..............	24
Selecting the dual 1 or dual 2 mode ...............	24
Stereo/Bilingual selection ..................................	25
Sound quality adjustment .................................	25
To select the audio output ................................	26
To select the HDMI audio mode ......................	26

To use the WOW surround sound ......................	27
To use the stable sound .....................................	27
To activate/deactivate the speaker ...............	27
Woofer internal/external mode, Bass boost,
Woofer system ....................................................	28
Features
Input selection .........................................................	29
Input selection ....................................................	29
Timer, Gray screen ...................................................	30
Timer ....................................................................	30
To activate gray screen ....................................	30
Side panel adjustment ...............................................	31
Side panel adjustment ......................................	31
To use the auto format ......................................	31
Teletext – Setting up ................................................	32
Teletext mode ....................................................	32
About Teletext..........................................................	33
Teletext general information ............................	33
Teletext SW adjustment .....................................	33
Teletext – FAST and LIST modes ..............................	34
Using FAST mode ................................................	34
Using LIST mode ..................................................	34
Teletext – Control buttons .......................................	35
Teletext buttons on the remote control ...........	35
BRIDGE MEDIA using................................................	36
To use the BRIDGE MEDIA ..................................	36
To use the BRIDGE MEDIA (still picture) ............	37
To use the BRIDGE MEDIA (motion picture) ....	40
To use the BRIDGE MEDIA (information) ..........	43
Double-Window using.............................................	44
To display the double-window .........................	44
To select the headphone mode ......................	45
To adjust the headphone volume
(Mode 2) .............................................................	45
To use a headphone .........................................	46
Equipment connections
Side connections .....................................................	47
Connection example ........................................	47
Back connections ...................................................	48
Connection example ........................................	48
Connecting a computer ........................................	49
To connect a computer ....................................	49
PC setting .................................................................	50
To adjust a PC setting ........................................	50
Connecting an HDMI and a DVI device ..............	52
To connect an HDMI and a DVI device ..........	52
Reference section
Troubleshooting .......................................................	53
Symptom and solution ......................................	53
Broadcast system, Specifications ..........................	54
Broadcast transmission systems of each
country or region ...............................................	54
LCD color television ...........................................	54

2

#01E02_32/37WL58AET

2

8/5/05, 3:43 PM

Black

Toshiba 32/37WL58AET (E)

Introduction

Important Safety Instructions

•Be sure to observe the following instructions and precautions to ensure safe use of this TV.

•The exact power cord will vary according to the country or region.

Installation

Always connect the power plug to an electrical outlet equipped with A model: 220-240V, AC 50Hz, E model: 220-240V, AC 50/60Hz and T model: 110-240V, AC 50/60Hz.

Never use the TV outside the specified voltage range. It may cause a fire or an electric shock.

WARNING ABOUT THREE-WIRE GROUNDING-TYPE PLUG: Never remove the earthing pin on the power plug. This system is equipped with a three pin earthing-type power plug. This plug will only fit an earthing-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician to replace the wall outlet.

Never defeat the purpose of the earthing plug.

Check!

Ex. 220-240V AC, 50/60Hz

About the fuse

In a three pin earthing-type, the fuse fitted in this plug is approved by ASTA or BSI to BS1362. It should only be replaced by a correctly rated and approved type and the fuse cover must be refitted.

Never insert or remove the power plug with wet hands.

This may cause electric shock.

Never place the TV in an unstabilized location such as on a shaky table, incline or location subject to vibration.

The TV may drop or fall down which may cause injury or damage.

Never block or cover the slots and openings in the cabinet.

•Never place the TV so that it is facing upward, or on its side.

•Never place the TV in a closet, bookshelf where the ventilation is poor.

•Never drape a newspaper, tablecloth or curtain on the TV.

•When installing the TV against a wall, always keep the TV at least 10 cm away from the wall.

•Never place the TV on a soft unstable surface, such as a carpet, or a cushion.

The inside of this TV will overheat if the ventilation holes are covered, blocked or sealed, which may result in a fire.

Never place the TV near a heater or in direct sunlight.

The surface of the cabinet or power cord may melt and result in fire or electric shock.

Introduction

Basic operation Getting started

Features

Equipment	connections
	Referencesection

3

#01E03-07_32/37WL58AET

3

8/5/05, 3:44 PM

Black

Toshiba 32/37WL58AET (E)

Introduction

Introduction

Important Safety Instructions (continued)

Installation (continued)

Never place the TV in an area exposed to high humidity levels, such as in a bathroom or close to a humidifier.

This may cause a fire or an electric shock.

Never place the TV next to a stove where it will be exposed to oil, smoke, or steam, or in a location where there is a large quantity of dust.

This may cause a fire or electric shock.

Install the TV in a horizontal, stable location. Connect between two clips on the back of the TV and a wall, pillar, etc., with a sturdy tie and clip of supplied accessories (see page 55).

•Use as short a tie as possible to ensure the TV is stable.

•If the TV is not installed securely, it may lean or fall over and cause an injury.

Sturdy tie

(as short as possible)

Clip

Clip

Clip

Side view

Top view

Precautions for moving the TV

•When moving the TV, be sure to remove the power plug from the wall outlet and disconnect the antenna cable and audio/video cables, any steady ties. Fire or electric shock may result if the power cord is damaged.

•When carrying the TV, at least two people are needed. Be sure to carry it upright.

•Never carry the TV with the screen facing up or down.

Precautions for installing on outdoor antenna

An outside antenna system should not be located in the vicinity of overhead power lines, or other electric light or power circuits.

If the antenna falls down or drops, it may cause injury or electric shock.

4

#01E03-07_32/37WL58AET

4

8/5/05, 3:44 PM

Black

Toshiba 32/37WL58AET (E)

Use

Never place hot objects or open flame sources, such as lighted candles or nightlights, on or close to the TV.

High temperatures can melt plastic and lead to fires.

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

When liquids are spilled or small items are dropped inside the TV, this may cause a fire or an electric shock. If small objects drop inside the TV, turn off the TV and remove the power plug from the outlet immediately and contact a service technician.

Never insert objects (metal or paper) or pour water inside the TV through ventilation holes and other openings.

These items may cause a fire or an electric shock.

If these objects are inserted inside the TV, turn off the TV and remove the power plug from the outlet immediately and contact a service technician. Be especially careful that children do not insert objects in the TV.

Never stand or climb on the TV.

Be especially careful in households with children to prevent them through climbing on top of the TV.

It may move, fall over, break, become damaged or cause an injury.

When the TV will not be used for a long period of time, such as during vacation or travel, remove the power plug from the wall outlet for safety.

Never pull on the power cord when removing the plug from the wall outlet.

Always hold the plug firmly when removing it. If the power cord is yanked, the cord may become damaged and fire or electric shock may occur.

Introduction

Basic operation Getting started

Features

Clip

Equipment	connections
	Referencesection

5

#01E03-07_32/37WL58AET

5

8/5/05, 3:44 PM

Black

Toshiba 32/37WL58AET (E)

Introduction

Introduction

Important Safety Instructions (continued)

Use (continued)

Never cut, break, modify, twist, bunch up or bent the cord or apply excessive force or tension to it.

Never place heavy objects on the cord or allow it to overheat as this may cause damage, fire or electric shock. Contact a service technician if the power cord is damaged.

If there is thunder or lightning, never touch the antenna cable or other connected cables.

You may suffer an electric shock.

Service

Never repair, modify or disassemble the TV by yourself.

If it may cause a fire or an electric shock. Consult a service technician for inspection and repairs.

When a malfunction occurs, or if smoke or an unusual odor comes from the TV, turn off the TV and remove the power plug from the outlet immediately.

Make sure that the smoke or smell has stopped, then contact a service technician. If the TV is still used in this condition, it may cause a fire or an electric shock.

If the TV is dropped or the cabinet is broken, turn off the TV and remove the power plug from the outlet immediately.

If the TV is still power used in this condition, it may cause a fire or an electric shock. If the cabinet is broken, be careful when handling the TV to prevent an injury. Contact a service technician for inspection and repair.

6

#01E03-07_32/37WL58AET

6

8/5/05, 3:44 PM

Black

Toshiba 32/37WL58AET (E)

Introduction

Important Safety Instructions (continued), Important in formation

Service (continued)

When the TV reaches the end of its useful life, ask a qualified service technician to properly dispose of the TV.

Note:

The lamp unit contains a small amount of mercury. Disposal of mercury may be regulated due to environmental considerations.

Dispose of the used lamp unit by the approved method for your area. For disposal or recycling information, please contact your local authorities.

Cleaning

Remove the power plug before cleaning.

Never use solvents such as benzine or thinner to clean the TV.

– These solvents may distort the cabinet or damage its finish.

– If rubber or vinyl products remain in contact with the TV for a long time, a stain may result.

If the cabinet becomes dirty, clean it with a soft, dry cloth.

When cleaning the surface of the LCD display, wipe the panel surface gently with a soft, dry cloth.

Introduction

Basic operation Getting started

Features

Periodically disconnect the power plug from the outlet and check it.

If dust has collected on the power plug connectors, clean off the Clean here dust.

This dust may cause a fire due to reduced insulation on the plug.

Important information

About LCD screen

•If you have the LCD screen facing to the sun, the LCD screen will be damaged. Be aware of locating the TV in the place such as window side or outside of the room.

•Never press the LCD screen strongly or scratch it, and never put anything on it. These actions will damage the LCD screen.

About cabinet

•Never spray volatile compounds such as insecticide on the cabinet. This may cause a discoloration or damage the cabinet.

Some pixels of the screen do not light up

•The LCD display panel is manufactured using an extremely high level of precision technology, however sometimes some pixels of the screen may be missing picture elements or have luminous spots. This is not a sign of a malfunction.

About Interference

•The LCD display may cause interference in image, sound, etc. of other electronic equipment that receives electromagnetic waves (e.g. AM radios and video equipment).

7

Equipment	connections
	Referencesection

#01E03-07_32/37WL58AET

7

8/5/05, 3:45 PM

Black

Toshiba 32/37WL58AET (E)

Getting started

Important information (continued), Installation

Getting started

Important information (continued)

About using under the low temperature places

•If you use the TV in the room of 0°C or less, the picture brightness may vary until the LCD monitor warms up. This is not a sign of a malfunction.

About afterimage

•If a still picture is displayed, an afterimage may remain on the screen, however it will disappear. This is not a sign of malfunction.

Exemptions

■Toshiba is not liable for any damage caused by fires, natural disaster (such as thunder, earthquake, etc.), acts by third parties, accidents, owner's misuse, or uses in other improper conditions.

■Toshiba is not liable for incidental damages (such as profit loss or interruption in business, modification or erasure of record data, etc.) caused by use or inability to use of product.

■Toshiba is not liable for any damage caused by neglect of the instructions described in the owner's manual.

■Toshiba is not liable for any damage caused by misuse or malfunction through simultaneous use of this product and the connected equipment.

Connecting an antenna

Optimum reception of color requires a good signal and will generally mean that an outdoor antenna must be used. The exact type and positioning of the antenna will depend upon your particular area.

Your Toshiba dealer or service personnel can best advise you on which antenna to use in your area. Before connecting the antenna cable, turn off all main POWER switches.

Before connecting the antenna cable, remove the back terminal cover (see page 10).

VHF and/or

UHF antenna

	300 Ω twin-lead feeder
		75 Ω
	Antenna adaptor	antenna
		terminal
	(not supplied)

75 Ω coaxial cable

Plug

(not supplied)

TV back view

75 Ω antenna terminal

8

#01E08-12_32/37WL58AET

8

8/5/05, 3:45 PM

Black

Toshiba 32/37WL58AET (E)

Getting started

Exploring your new TV

•You can operate your TV using the buttons on the top of the panel or the remote control. The back and side of the panel provide the terminal connections to connect other equipment to your TV. See “Equipment connections” on pages 47-52.

Introduction

Installing the remote control batteries

Remove the battery cover.

Insert two R03 (AAA) batteries matching the –/+ polarities of the battery to the –/+ marks inside the battery compartment.

Caution:

•Dispose of batteries in a designated disposal area. Never throw batteries into a fire.

•Attention should be drawn to the environmental aspects of battery disposal.

•Never mix battery types or combine used batteries with new ones.

Effective range

within 5 m

Notes:

•If the remote control does not operate correctly, or if the operating range becomes reduced, replace both batteries with new ones.

•If the batteries are dead or if you will not use the remote control for a long time, remove the batteries to prevent battery acid from leaking into the battery compartment.

Basic operation Getting started

Features

TV top, TV front

For the use of each control, see the pages in brackets.

TV top view							TV front view

You can swivel the TV screen.
Swivel angle: 15 degrees to	Top view
left and right.

				/ Power switch
				[12]
Input source					Remote sensor
	Volume – + [17]		Power [12]		Power indicator
selection [29]	Menu	[13]			(red) [12]
MENU [13]		Program position		[17]	On-timer indicator
		Menu	[13]		(green) [30]

Equipment	connections
	Referencesection

9

#01E08-12_32/37WL58AET

9

8/5/05, 3:45 PM

Black

Toshiba 32/37WL58AET (E)

Getting started

Getting started

Exploring your new TV (continued)

TV back

• Before connecting external equipment etc., remove the back terminal covers (squeeze tabs ( mark in the figure below) and pull covers).

Left side view

Right side view

TV back view

(1) Video 1 input terminals [48]

(C1) COMPONENT VIDEO INPUT terminals [48]

(C2) COMPONENT VIDEO INPUT terminals [48]

WOOFER OUT terminal [28, 48]

AUDIO OUT terminals [48] (Fixed/Variable)

Card into the slot [36]

			Squeeze tab and pull here
			to open the door.
			RGB/PC
			input [49]
		Power cord
		Cable holder*	HDMI 2
			input terminal [52]
		Back view
	Antenna input
	[8]
	Right side
	view
	(2)	RGB/PC	HDMI 1
		(AUDIO)
			input terminal [52]
	Video 2 input	input [49]
	terminals [47]		HDMI 2 AUDIO
			input terminals [52]
MONITOR	Headphone jack		HDMI 1 AUDIO
OUT terminals
	(3.5 mm, stereo)
[48]			input terminals [52]

Headphones [45]

(Not supplied)

*You can use the cable holder to hold antenna cable, video and audio cables etc.

When moving the TV, never hold this holder.

10

#01E08-12_32/37WL58AET

10

8/5/05, 3:46 PM

Black

Toshiba 32/37WL58AET (E)

Getting started

Learning about the remote control

Introduction

Location of controls

For the use of each control, see the pages in brackets.

Teletext on/off [33 – 35]

CALL [15, 17] Initial/index function for Teletext [35]

To return to the previous program [17]

Picture mode selection [20]

MENU [13]

DVD MENU

•Menu [13]

•Volume – + [17, 44]

OK [13, 29]

Stereo/bilingual selection [25]

Mode switch

TV : To control TV

VCR : To control VCR

DVD : To control DVD

When in VCR or DVD mode: (Only for Toshiba VCR/DVD players)

to EJECT

to REWIND

to PLAY

to FAST FORWARD

to PAUSE

to SKIP-REWIND to STOP

to SKIP-FORWARD

CALL

1 2

4 5

7 8

0

MENU

P

DVD

MENU

OK

P

TV

VCR

DVD

CT-90241

			Gettingstarted
	Power on/Standby [12]
6	(For Toshiba TV/VCR/DVD)		operation
3
	Number buttons (0-9)	[17, 30]
9	• Input source selection [29]		Basic
	HDMI 1, HDMI 2, PC, BM)
	( 1, 2, C1,	C2,

•To access sub-pages when in teletext [33]

	Picture size selection [18]				Features
EXIT	EXIT [13]
	• Menu		[13]
	• Program position			[17]
	• Teletext		[34]
	• P	[44]
	• Teletext control buttons [34]				Equipment connections
	(Four colored buttons: Red,
	Green, Yellow, Blue)
	• BRIDGE MEDIA [37-43]
	• Bass boost on/off [28]
	• External woofer on/off [28]
	Sound mute [17]				section
	When in Teletext mode:
					Reference
	? To reveal concealed text [35]
	v To hold a wanted page [35]
	^ To enlarge teletext display size [35]
	y/X To select a page while viewing
		a normal picture [35]
	When in TV mode:
	y/X To select the time display [35]
		Double-Window on/off [44]
		Picture STILL [22, 44]
	n		Double-Window picture/
			sound selection [44]

11

#01E08-12_32/37WL58AET

11

8/5/05, 3:46 PM

Black

Toshiba 32/37WL58AET (E)

Getting started

Turning the TV on, Selecting a language

Getting started

• Connect the power cord to a wall outlet.

Switching on the TV

TV top view

CALL
1	2	3
4	5	6
7	8	9
	0
MENU	P	EXIT

DVD

MENU

OK

P

Note:

If you watch black and white programs when the color system mode is set to Auto, color noise may appear on the screen. In this case select the appropriate Color system (For the system of each country or region, refer to pages 15 and 54).

12

Press the				/	POWER switch
on the TV left side until it							1		Mono
clicks.
The		Power ON indicator lights in red. Press the							button on
the remote control or on the TV top panel if no picture
appears.

Switching off the TV

Press the button on the remote control or on the TV top panel to switch to the standby mode.

To switch the TV off, press the / POWER switch on the TV left side .

Power indicator will be turned off.

Notes:

•This TV is not full disconnected from the main supply, as minute current is consumed even when the / POWER switch is turned off.

When the TV will not be used for a long period of time, such as during vacation or travel, remove the power plug from the wall outlet.

•The TV will automatically turn itself off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes its broadcast for the day. This function does not work in external input or Gray screen Off mode.

•If power is cut off while you are viewing the TV, the Last Mode Memory function turns on the TV automatically when power is applied again. If power is going to be off for a long time and you are going to be away from your TV, unplug the power cord to prevent the TV from tuning on in your absence.

Selecting a language

Choose from 9 different languages (English, Chinese (CS), Malay, Thai, Vietnamese, Russian, Arabic, Persian or French) for the onscreen display.

Press the MENU button, then press the or button to display the SET UP menu.

Press the	or	button to
select Language.
			SET UP
			Language		English
Press the	or	button to	Auto tuning		OK
select the desired language.			Manual tuning		OK
			Program sorting		OK
			AV connection		OK
			Picture position		OK
			MENU Back EXIT Watch TV

#01E08-12_32/37WL58AET

12

8/5/05, 3:46 PM

Black

Toshiba 32/37WL58AET (E)

Getting started

Learning about the menu system

•We suggest you familiarize yourself with the display charts before using the menu system:

•Press the MENU button to display menu, then press the or button to select main menu headings.

•Press the or button to select an item.

•Press the or button to select or adjust setting.

•Press the OK button to display the next menu.

Introduction

Menu display chart

PICTURE menu

PICTURE
Picture settings		OK
Color management		Off
Base color adjustment
Cinema mode		On
MENU Back EXIT Watch TV

SOUND menu

SOUND		1/2
MTS		Auto
Dual		Dual 1
Headphone		Mode1
Headphone level
Bass		0
Treble		0
MENU Back EXIT Watch TV

SET UP menu

SET UP
Language		English
Auto tuning		OK
Manual tuning		OK
Program sorting		OK
AV connection		OK
Picture position		OK
MENU Back EXIT Watch TV

TIMER menu

		TIMER
	Sleep timer			00:00
	On timer			00:00
	On timer Position			01
	MENU Back	EXIT Watch TV
FUNCTION
menu
		FUNCTION
	Teletext			FAST
	Teletext SW			1
	Auto format			On
	Gray screen			On
	Side panel			1
	MENU Back	EXIT Watch TV

started

Getting

Black stretch

On

2/2

Picture settings

MPEG NR

Low

PICTURE

DNR

Auto

Picture settings

OK

Picture settings

Normal

1/2

Color Temperature

Color management

Off

Back light

100

Contrast

100

Base color adjustment

Contrast

100

operationBasic

Cinema mode

On

Brightness

50

MENU Back

EXIT Watch TV

Color

50

Tint

0

MENU Back EXIT Watch TV

Sharpness

0

MENU Back

EXIT Watch TV

	SOUND	2/2
	Balance	0
	Speaker	On
	SOUND	1/2
MTS		Auto
Dual		Dual 1
	Headphone	Mode1
	Headphone level
Bass		0
Treble		0

MENU Back EXIT Watch TV

SET UP
Language		English
Auto tuning		OK
Manual tuning		OK
Program sorting		OK
AV connection		OK
Picture position		OK
MENU Back EXIT Watch TV

TIMER
Sleep timer	00:00
On timer	00:00
On timer Position	01

MENU Back EXIT Watch TV

	FUNCTION
Teletext		FAST
Teletext SW		1
Auto format		On
Gray screen		On
Side panel		1
MENU Back	EXIT Watch TV

Notes:

•In the video input mode ( 1, 2, C1, C2, HDMI 1, HDMI 2), Auto tuning, Manual tuning and Program sorting are not available. Instead, Manual setting appears in the SET UP menu (see page 29).

•If you connect external equipment via component video source to external input, Color system selection in the Manual setting menu is not available.

•If you do not make a selection for a while, the menu display disappears automatically.

•If you want to close the menu display instantly, press the EXIT button except for the BRIDGE MEDIA function (see page 36).

•To return to the previous menu, press the MENU button except for the BRIDGE MEDIA function (see page 36).

•The buttons function as the Program position P / P buttons when there is no menu display on the screen.

•The buttons function as the Volume +/ – buttons when there is no menu display on the screen.

•In the PC input mode, PC Setting appears in the SET UP menu (see page 29).

•In the 480i or 576i input signals mode, you can select the Cinema mode in the PICTURE menu (see page 22).

•When you use the color management function (see page 23), you can select the Base color adjustment in the PICTURE menu.

•When you use the double-window function (see page 45), you can select the Headphone level in the SOUND menu.

13

Features

Equipment	connections
	Referencesection

#01E13-17_32/37WL58AET

13

8/5/05, 3:47 PM

Black

Toshiba 32/37WL58AET (E)

Getting started

Programming channel memory

Getting started

•First, use the Auto tuning function to preset all the active channels in your area automatically. Then, arrange the preset channels with the Manual tuning function so that you can tune into only desired channels.

•Use the Manual tuning operation if desired channels cannot be preset with the Auto tuning or if you would like to preset channels to specific position numbers one by one.

System selection, Auto tuning

CALL
1	2	3
4	5	6
7	8	9
	0
MENU	P	EXIT

DVD

MENU

OK

P

TV

VCR

DVD

14

Press the MENU button, then press the or button to display the SET UP menu.

Press the or button to select Auto tuning.

Press the OK button to display the Auto tuning menu.

SET UP
Language		English
Auto tuning		OK
Manual tuning		OK
Program sorting		OK
AV connection		OK
Picture position		OK
MENU Back EXIT Watch TV

Auto tuning

!Press OK key to start. EXIT for no change.

MENU Back EXIT Watch TV

Press the OK button to start the			Auto tuning
automatic search.	Searching
	Pos	:2
The search will begin for all
	EXIT	Stop

available stations.

The slide bar will move along the line as the search progresses.

If you make a mistake, simply repeat steps 1-4 to start again from the beginning.

When the automatic search is complete, the TV will automatically return to the first program position.

Press the P or P button to view the programmed position.

Manual tuning

Press the MENU button, then press the or button to display the SET UP menu. Press the or button to select Manual tuning.

Press the OK button to display the Manual tuning menu. Press the or button to select the program position you want to arrange.

Press the OK button to display the breakdown menu.

Press the or button to select an item, then press the or button to select the item as shown below and on the next page.

A.Program position selection

B.Sound system (see page 54)

		SET UP
Language			English
Auto tuning			OK
Manual tuning			OK
Program sorting			OK
AV connection			OK
Picture position			OK
MENU Back EXIT Watch TV
	Manual tuning
Prog. Sys.		Label
1	B/G
2	B/G
3	B/G
4	B/G
5	B/G
6	B/G

OK

Select

MENU Back

EXIT Watch TV

Manual tuning

Program

1

B/G

A

OK

Store

MENU Back

EXIT Watch TV

A

C

E

G

B

D

F

H

#01E13-17_32/37WL58AET

14

8/5/05, 3:47 PM

Black

Toshiba 32/37WL58AET (E)

Manual tuning (continued)

CALL

1 2 3

4 5 6

7 8 9

0

MENU	P	EXIT

DVD

MENU

OK

P

TV

VCR

DVD

#01E13-17_32/37WL58AET		15

Black

Introduction

C. Color system (see page 54)

started

A : Automatic (factory setting), P : PAL, S : SECAM

Getting

N4 : NTSC 4.43 (MHz), N3 : NTSC 3.58 (MHz)

If the color of a certain channel is abnormal, the automatic

color system selection (A) may have malfunctioned, or

sound system selection is wrong. In such a case, select

another color and/or sound system (see page 54).

D. Program position skip selection

operation

Press the

or

button to turn the program position skip

option on “

” or off “

”.

The program position will then be skipped when you

select channels with the P

or P button.

Basic

The “

” mark will appear beside a program position

number when you use the Number button on the remote

control.

E. Channel search operation

Press the

button to search up the band or the

button

to search down the band.

Press the

or

button repeatedly until your desired

Features

channel is displayed.

When a station/satellite is found, it will be displayed.

NEVER PRESS ANY OTHER BUTTONS WHILE THE

SET IS TUNING.

F. Auto Fine Tuning

Press the

or

button to turn the Auto Fine Tuning

option on “ ” or off “0”.

The Auto Fine Tuning function automatically corrects

slight fluctuations when receiving signals.

Equipment connections

Press the

or

button to turn the ANT ATT option on

Manual Fine Tuning

While the Auto Fine Tuning turn off “0”, press the

or

button so that the better picture and sound are obtained.

G. ANT ATT (Antenna attenuator)

“ ” or off “

”, when visual interference occurs, set the

ANT ATT to on.

H. Label

Station labels appear under the program position display

section

each time you turn on the TV, select a channel, or press

the CALL button.

Reference

To change or create station labels:

1) Press the

or button repeatedly to select a

character for the first space, then press the button.

*(blank space)

2)Repeat step 1) to enter the rest of the characters. If you would like a blank space in the label name, you must choose a blank space from the list of characters.

Press the OK button to store your settings.

15

8/5/05, 3:47 PM

Toshiba 32/37WL58AET (E)

Getting started

Getting started

Programming channel memory (continued)

•This TV is capable of receiving a number of different channels depending upon where you live.

•Program sorting is an easy way of storing each channel on the program position of your choice.

Program sorting

CALL

1 2 3

4 5 6

7 8 9

0

MENU	P	EXIT

DVD

MENU

OK

P

TV

VCR

DVD

Ex.: To swap channel ABCD (Prog.1) for channel MNOP (Prog.4):

Press the MENU button, then press the or button to display the SET UP menu. Press the or button to select Program sorting.

Press the OK button to display the Program sorting menu.

Press the or button to select the channel ABCD, then press the button.

Press the button to select the new position “4”, then press the button.

Press the button to select the channel MNOP, then press the button.

Press the button to select the new position “1”, then press the button.

Confirm new sorting list.

SET UP

Language	English
Auto tuning	OK
Manual tuning	OK
Program sorting	OK
AV connection	OK
Picture position	OK

MENU Back			EXIT Watch TV
			Program sorting
Prog.			Label
1			ABCD

2EFGH

3IJKL

4MNOP

5

6

Select

MENU Back

EXIT Watch TV

Program sorting

Prog. Label

1EFGH

2IJKL

3				MNOP
4				ABCD
5
6
		Sort		Store
MENU Back				EXIT Watch TV

				Program sorting
Prog.				Label
1				EFGH
2				IJKL
3				MNOP
4				ABCD
5
6
		Sort		Store
MENU Back				EXIT Watch TV
				Program sorting
Prog.				Label
1				MNOP

2EFGH

3IJKL

4ABCD

5

6

Select

MENU Back

EXIT Watch TV

16

#01E13-17_32/37WL58AET

16

8/5/05, 3:48 PM

Black

Toshiba 32/37WL58AET (E)

Getting started

Watching TV programs

Introduction

Volume, Sound mute, Changing program positions, Program return, On-screen information

TV top view	To alter the volume:
	Press the	+ or	– button
	to raise or lower the volume.			Volume	30

			To mute the sound:
			Press the	button. The word
			Sound mute appears on the
			screen.		Sound mute
CALL			Press the	button again to
1	2	3	restore the sound.
4	5	6	To change program position:
			Enter the desired program
7	8	9	position number using the		1	MNOP	Mono
			Number buttons on the remote
	0		control.
			For program positions below 10, use 0 and the required
			number e.g., for program position 1.
			You can also change the program position by using the P or
MENU	P	EXIT	P button.
			The program position will be displayed on the screen with
DVD
MENU			the Mono/Stereo/Dual audio status.
	OK		To switch between two program positions:
			You can switch two program positions without entering actual
			position number each time.
			Select the first program
	P		position you want to view.		2	EFGH	Stereo
			Select the second program
			position with the Number
			buttons (0-9).		3 IJKL		Dual
			Press the	button. The
TV			previous channel will be
VCR			displayed.
DVD
			Each time you press the button, the TV will switch back and
			forth between the two program positions.
			To display the on-screen information:
			Press the CALL button to
			display the following on-screen		4	ABCD	Stereo
			information.
			The information will disappear
			in 6 seconds.
			• Program position or external input mode selected
Note:			• Program skip on/off information
			• Label (if set)
The program position selection change
			• Mono/Stereo/Dual audio status
between different format channels takes
several seconds.			To erase the display instantly, press the CALL button again.

17

Basic operation Getting started

Features

Equipment	connections
	Referencesection

#01E13-17_32/37WL58AET

17

8/5/05, 3:48 PM

Black

Toshiba 32/37WL58AET (E)