Toshiba 32A60, 36A60, 27A60 User Manual

0 (0)

OWNER'S MANUAL

Color Television

TM

27A60

32A60

36A60

Welcome to

Connecting

Using the

Setting up

Using the TV’s

Appendix

Index

Toshiba

your TV

Remote Control

your TV

Features

Reference

Reference

© TOSHIBA CORPORATION, 2000

SAFETY PRECAUTIONS

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

ADVERTENCIA RIESGO DE

DESCARGA ELÉCTRICIA - NO ABRIR

The lightning symbol in the triangle tells you that the voltage inside this product may be strong enough to cause an electric shock. DO NOT TRY TO SERVICE THIS PRODUCT YOURSELF.

The exclamation mark in the triangle tells you that important operating and maintenance instructions follow this symbol.

CAUTIONS

TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLET UNLESS THE PRONGS CAN BE FULLY INSERTED INTO THE OUTLET TO PREVENT ANY EXPOSURE OF THE PRONGS ON THE POLARIZED PLUG.

PRECAUCIONES

PARA EVITAR DESCARGAS ELÉCTRICAS, NO UTILICE ESTE ENCHUFE POLARIZADO CON UN RECEPTÁCULO DE CABLE DE EXTENSIÓN U OTRA TOMA SALVO QUE LA CLAVIJA ESTÉ COMPLETAMENTE INSERTADA EN LA TOMA PARA EVITAR CUALQUIER EXPOSICIÓN DE LOS VÁSTAGOS DEL ENCHUFE POLARIZADO.

WARNING

To avoid personal injury:

Do not stand or climb on the TV.

Do not put a VCR or any heavy object on top of the TV.

ADVERTENCIA

Para evitar daños personales:

No se ponga de pie en el TV ni suba a él.

No coloque el vídeo (p. ej. VCR) ni otro objeto pesado en la parte superior del TV.

Avoid displaying stationary images on your TV screen for extended periods of time. Stationary patterns generated by a picture-in-picture (PIP) display, computer displays, video games, stock market reports, etc., can become permanently engrained on the picture tube. This damage is not protected by your warranty because it is the result of misuse. If you wish to use your TV to display still images, reduce brightness and contrast settings. Never leave a PIP, computer, or video game display unattended.

This TV set may be used with the Toshiba stand listed on page 32. Use with other stands may result in instability, causing possible injury.

Note to CATV system installers in the USA

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC, which provides guidelines for proper grounding, and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

IMPORTANT SAFETY INSTRUCTIONS

INSTRUCCIONES DE SEGURIDAD

CAUTION

PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS CONTAINED IN THIS SECTION AND THOSE ON YOUR TV SET.

RETAIN THIS SECTION FOR REFERENCE.

PRECAUCIÓN

LEA Y TENGA EN CUENTA TODAS LAS ADVERTENCIAS E INSTRUCCIONES QUE SE ENCUENTRAN EN ESTE PANFLETO Y LAS DE LOS APARATOS DE TELEVISIÓN.

MANTENGA ESTE PANFLETO PARA FUTURAS REFERENCIAS.

Electrical energy can perform many useful functions. This TV set has been engineered and manufactured to assure your personal safety. However, improper use can result in potential electrical shock or fire hazards. In order not to defeat the safeguards incorporated in this TV set, observe the following basic rules for antenna/TV installation, use and servicing.

Do not remove the cabinet cover. This may expose you to dangerous voltages. Refer all servicing to qualified service personnel.

La energía eléctrica puede realizar funciones muy útiles. Este televisor ha sido diseñado y fabricado para asegurar su seguridad personal. Sin embargo, la utilización inadecuada del mismo puede resultar en descargas eléctricas o en el riesgo de incendios. Para no anular las protecciones incorporadas en este televisor, tenga en cuenta las reglas básicas de instalación de la antena/televisor, y en caso de proplemas póngase en contacto con un centro de reparaciones.

No extraiga de la cubierta de la caja. Esto podría dejarle expuesto a tensiones peligrosas. En caso de averia, consulte los servicios de personal cualificado.

INSTALLATION / INSTALACIÓN

Power Sources — The TV set should be operated only from the type of power source indicated on the TV set or as indicated in the Owner’s Manual. If you are not sure of the type of power supply in your home, consult your sales person or your local power company. For TV sets designed to operate from battery power, refer to the operating instructions.

Fuentes de alimentación — Este televisor solamente deberá alimentarse con la fuente de alimentación indicada en la etiqueta de características. Si no está seguro del tipo de fuente de alimentación de su hogar, consulte al proveedor de su televisor o a la compañia eléctrica local. Para productos destinados a alimentarse con pilas, u otras fuentes, consulte las instrucciones de operación.

Grounding or Polarization — The TV set is equipped with one of the following type plugs. If the plug should fail to fit the power outlet, contact your electrician to replace your obsolete outlet. DO NOT defeat the safety purpose of the type plug on the TV set.

Puesta a tierra o polarización — Este televisor puede poseer un enchufe de los tipos siguinetes. Si el enchufe no entra en la toma de la red, póngase en contacto con un electricista para que le cambie la toma anticuada. NO anule el fin de seguirdad de sete tipo de enchufe del televisor.

ii

A polarized alternating current line plug — having one blade wider than the other. This plug will fit into the power outlet only one way. If you are unable to insert the plug into the outlet, try reversing the plug.

Un enchufe de línea de corriente alterna polarizado — posee una cuchilla más ancha que la otra. Este enchufe entrará en la toma de la red de una sola forma. Si no puede inertar el enchufe en la toma de la red, trate de invertirlo.

Alternate Warnings — A three-wire grounding-type plug — a plug having a third (grounding) pin. This plug will only fit into groundingtype power outlet.

Advertencias alternativas — Enchufe de tippo puesta a tierra de tres conductores — enchufe que posee un tercer terminal (de puesta a tierra). Este enchufe solamente encajará en una toma de la red de tipo puesta a tierra.

Water and Moisture — Do not use the TV set near water — for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

Agua y humedad — No utilice el televisor cerca del agua — por ejemplo, cerca de una bañera, un lavabo, un fregadero, una lavadora, en un sótano húmedo, cerca de una piscina, ni lugares por el estilo.

Ventilation — The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. Never block or cover these slots and openings to ensure reliable operation of the TV set and to protect it from overheating.

Ventilación — Las ranuras y aberturas de la caja y de la parte posterior o de la base son para proporcionar la ventilación necesaria. Para asegurar la operación fiable del televisor para protegerlo contra el recalentamiento. No bloquee ni cubra nunca estas ranuras y aberturas.

a.Never cover the slots and openings with a cloth or other materials.

a.No cubra nunca las ranuras ni las aberturas con paños ni otros materiales.

b.Never block the slots and openings by placing the TV set on a bed, sofa, rug or other similar surface.

b.No bloquee nunca las ranuras ni las aberturas colocando el televisor sobre una cama, un sofá, una alfombra, ni demás superficies similares.

c.Never place the TV set in a confined space such as a bookcase, builtin cabinet, or any other place of poor ventilation.

c.No coloque nunca el televisor en un espacio cubierto, como una librería o un estante empotrados, nien un lugar de mala ventilación.

Heat — Do not place the TV set near or over a radiator or heat register, or where it is exposed to direct sunlight.

Calor — No coloque el televisor cerca ni sobre un radiador ni un registro de calor, ni expuesto a la luz solar directa.

Power-Cord Protection — Do not allow anything to rest on or roll over the power cord, and do not place the TV set where the power cord is subject to wear or abuse.

Protección del cable de alimentación — No coloque ni pase sobre el cable de alimentación, ni coloque el telivisor donde su cable de alimentación pueda sufir cualquier tipo de daños.

Accessories — Do not place the TV set on an unstable cart, stand, tripod, bracket, or table. The TV set may fall, causing serious injury to a child or adult, and serious damage to the TV set. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the TV set, and should use a mounting accessory recommended by the manufacturer.

Accesorios — No coloque el televisor sobre un carrito, una base, un trípode, un soporte ni una mesea inestable. El televisor podría caerse, causando serios daños a niños o adultos, o al propio televisor. Utilice solamente el carrito, la base, el trípode, el soporte, o la mesa que recomiende el fabricante, o que se venda con el televisor, y utilice un accesorio de montaje recomendado por el fabricante.

A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

La combinación de un producto y un carrito deberá moverse con cuidado. Las paradas repentinas, la fuerza excesiva, y las superficies desiguales pondrían hacer que volcase la combinación del carrito y del producto.

USE / UTILIZACIÓN

Overloading — Do not overload wall outlets, extension cords or convenience receptacles beyond their capacity, since this can result in fire or electric shock.

Sobrecarga — No sobrecargue las tomas de la red, los cables prolongadores, ni los adaptadores para múltiples tomas, ya que esto supondría el riesgo de incendios o de descargas eléctricas.

During lightning storms, or when the TV set will be left unattended and unused for a long period of time, unplug the power cord from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV set due to lightning and power-line surges.

Durante tormentas eléctricas, o cuando no vaya a utilizar el televisor durante mucho tiempo, desenchufe el cable de alimentación de la toma de la red y desconecte la antena o el sistema de cablevisión. Esto evitará que se dañe el televisor debido a rayos y a sobretensiones repentinas en la red.

Object and Liquid Entry — Never push objects of any kind into the TV set through the cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock.

Never spill liquid of any kind on the TV set.

Entrada de objetos y líquidos — No introduzca nunca objetos de ningún tipo en este televisor a través de las aberturas, ya que podrían tocar puntos de tensión peligrosa o cortocircuitar piezas, lo que podría resultar en incendio o descarga eléctrica. No vierta nunca liquidos de ningún tipo sobre este televisor.

Cleaning — Unplug the TV set from the wall outlet before cleaning or polishing it. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the TV set.

Limpieza — Desenchufe el televisor de la toma de la red antes de limpiarlo. No utilice limpiadores líquidos ni aerosoles. Para limpiar el exterior del televisor, utilice un paño ligeramente humedecido en agua.

Attachments — Never add accessories that have not been specifically designed for the TV set. Never remodel the TV set by yourself as this can result in a fire hazard or electric shock.

Aditamentos — No utilice aditamentos no recomendados por el fabricante del televisor, ya que podrían suponer un peligro. No remodele nunca el televisor usted mismo, ya que esto podría causar el riesgo de incendios o descargas eléctricas.

If a snapping or popping sound from a TV set is heard continuously or frequently while the TV set is operated, unplug the TV set and consult your dealer or service technician. It is normal for some TV sets to make occasional snapping or popping sounds, particularly when being turned on or off.

Si se oye un sonido seco de un televisor continuo o frecuente mientras el televisor esté funcionando, desenchúfelo y consulte a su proveedor o a un técnico de servicio. Es normal que algunos televisores produzcan sonidos secos, particularmente cuando conecte o desconecte su alimentación.

iii

SERVICE / SERVICIO DE REPARACIÓN

Damage Requiring Service — Unplug the TV set from the wall outlet and refer servicing to qualified service personnel under the following conditions:

Daños que requieren el servicio de reparación — En los casos siguientes, desenchufe el televisor de la toma de la red y solicite los servicios de personal de reparación especializado:

a. When the power cord or plug is damaged or frayed.

a.Cuando se haya dañado el cable de alimentación o el enchufe.

b.When liquid has been spilled into the TV set.

b.Cuando se haya vertido líquido dentro del televisor.

c.When the TV set has been exposed to rain or water.

c.Cuando el televisor haya estado expuesto a la lluvia o al agua.

d.When the TV set has been subject to excessive shock by being dropped, or the cabinet has been damaged.

d.Cuando el televisor haya estado expuesto a golpes excesivos o haya caído, o su caja se haya dañado.

e.When the TV set does not operate normally even though you follow the operating instructions. Adjust only those controls that are specified in the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV set to normal operation.

When the TV set exhibits a distinct change in performance. This indicates a need for service.

e.Cuando el televisor no funcione normalmente incluso al seguir las instrucciones de operación. Ajuste solamente los controles indicados en las instrucciones de operación, ya que un ajuste inadecuado de otros controles podría resultar en daños y a menudo requerirán un trabajo difícil por un técnico cualificado para devolver el televisor a su funcionamiento normal.

Cuando el funcionamiento del televisor haya cambiado notablemente — esto indica la necesidad del servicio de reparación.

Servicing — Do not attempt to service the TV set yourself. To open or remove the covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Reparación — No intente nunca reparar el televisor por sí mismo. La apertura o extracción de cubiertas podría exponerle a tensiones peligrosas u otros peligros. En caso de avería solicite los servicios de personal de reparación cualificado.

Replacement Parts — When replacement parts are required, be sure the service technician certifies in writing that he has used replacement parts specified by the manufacturer that have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards.

Reemplazo de piezas — Cuando sea necesario reemplazar piezas, cerciórese de que el técnico de reparación utilice las piezas de reemplazo especificadas por el fabricante u otras que posean las mismas características que las originales. Las substituciones no autorizadas podrían resultar en incendios, descargas eléctricas, u otros peligros.

Safety Check — Upon completion of any service or repairs to the TV set, ask the service technician to perform routine safety checks (as specified by the manufacturer) to determine that the TV set is in safe operating condition, and to so certify.

Comprobación de seguridad — Al finalizar cualquier reparación de este televisor, solicite al técnico de reparación que realice las comprobaciones de sguridad (especificadas por el fabricante) para determinar y certificar si el producto se encuentra en las condiciones de operación apropiadas.

When the TV set reaches the end of its useful life, improper disposal could result in a picture tube implosion. Ask a qualified service technician to dispose of the TV set.

Cuando el televisor llegue al final de su vida útil, si se deshace de él de forma inapropiada, el tubo de imagen puede explotar. Cuando desee deshacerse de un televisor, solicite este servicio a un técnico de reparación especializado.

ANTENNA / ANTENA

Outdoor Antenna Grounding — If an outdoor antenna is installed, follow the precautions below.

An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits.

WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM, EXTREME CARE SHOULD BE TAKEN TO KEEP FROM CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT WITH THEM IS ALMOST INVARIABLY FATAL.

Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code in the USA and Section 54 of the Canadian Electrical Code in Canada provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

Puesta a tierra de la antena exterior — Cuando instale una antena exterior, tenga en cuenta las precauciones siguientes.

Un sistema de antena esterior no deberá colocarse cerca de líneas de alta tensión ni otros circuitos de iluminación o alimentación, ni donde pueda entrar en contacto con tales líneas o circuitos.

CUANDO INSTALE UN SISTEMA DE ANTENA EXTERIOR, TENGA EXTREMADO CUIDADO PARA EVITAR QUE ENTRE EN CONTACTO CON TALES LÍNEAS DE ALIMENTACIÓN O CIRCUITOS, YA QUE TAL CONTACTO PODRÍA RESULTAR INVARIABLEMENTE FATAL.

Cerciórese de que el sistema de antena esté puesto a tierra a fin de que proporcione cierta protección contra sobretensiones y cargas estáticas. La Sección 810 del Código Eléctrico Nacional (NEC) de EE.UU. y la Sección 54 del Código Eléctrico Canadiense ofrecen informacón con respecto a la puesta a tierra adecuada de una unidad de descarga de antena, el tamaño de los conductores de puesta a tierra, la ubicación de la unidad de descarga de la antena, la conexión de los electrodos de puesta a tierra, y los requisitos de tales electrodos.

iv

Welcome to Toshiba ..............................................................................................................................

1

Exploring your new TV ...............................................................................................................................

1

Selecting a location for the TV ....................................................................................................................

1

Connecting your TV ...............................................................................................................................

2

Connecting a VCR ......................................................................................................................................

2

Connecting a cable converter box ................................................................................................................

3

Connecting a cable converter box and a VCR .............................................................................................

3

Connecting a DVD/satellite receiver and a VCR .........................................................................................

4

Connecting a DVD with ColorStream™ and a VCR .................................................................................

4

Connecting two VCRs ................................................................................................................................

5

Connecting a camcorder .............................................................................................................................

6

Connecting an audio amplifier ....................................................................................................................

6

Using the remote control .....................................................................................................................

7

Preparing the remote control for use ...........................................................................................................

7

Installing the remote control batteries .........................................................................................................

7

Using the remote control with a VCR or a cable TV converter ....................................................................

7

Programming the remote control for use with a VCR or a cable TV converter ............................................

8

VCR code table .....................................................................................................................................

9

Cable TV converter code table ..............................................................................................................

9

Location of controls ..................................................................................................................................

11

Setting up your TV ..............................................................................................................................

12

Changing the on-screen display language ..................................................................................................

12

Selecting the antenna input .......................................................................................................................

12

Using the TV/VIDEO button .............................................................................................................

12

Adding channels to the TV’s memory .......................................................................................................

13

Programming channels automatically ..................................................................................................

13

Adding and erasing channels manually ................................................................................................

14

Changing channels ....................................................................................................................................

14

Using the TV’s features......................................................................................................................

15

Adjusting the channel settings ...................................................................................................................

15

Switching between two channels .........................................................................................................

15

Programming your favorite channels ...................................................................................................

15

Using the V-Chip ......................................................................................................................................

16

Selecting a PIN code ...........................................................................................................................

16

Blocking programs by ratings ..............................................................................................................

17

Blocking unrated movies or programs .................................................................................................

20

Blocking channels ...............................................................................................................................

20

Video Lock ...............................................................................................................................................

21

v

Labeling channels ......................................................................................................................................

22

Video Label ...............................................................................................................................................

23

Watching picture-in-picture (PIP) .............................................................................................................

24

Switching the main and small pictures ................................................................................................

25

Changing the position of the small picture ..........................................................................................

25

Freezing the small picture ....................................................................................................................

25

Watching multi-window PIP .....................................................................................................................

25

Adjusting the picture .................................................................................................................................

26

Adjusting the picture quality ...............................................................................................................

26

Selecting the color temperature ...........................................................................................................

27

Adjusting the picture preferences .........................................................................................................

27

Watching video input ................................................................................................................................

27

Displaying on-screen information .............................................................................................................

27

Setting the off-timer ..................................................................................................................................

27

Auto power off ..........................................................................................................................................

28

Using the closed caption feature ................................................................................................................

28

Adjusting the sound ..................................................................................................................................

29

Muting the sound ...............................................................................................................................

29

Selecting stereo/SAP broadcasts ...........................................................................................................

29

Adjusting the sound quality.................................................................................................................

30

Using the surround sound feature .......................................................................................................

31

Viewing the demonstration mode .............................................................................................................

31

Understanding the last mode memory feature ...........................................................................................

31

Appendix ...............................................................................................................................................

32

Cleaning and care ......................................................................................................................................

32

Troubleshooting ........................................................................................................................................

32

Specifications ............................................................................................................................................

33

Limited United States warranty .................................................................................................................

34

Attention Canadian customers ............................................................................................................

35

Index ......................................................................................................................................................

36

vi

Welcome to Toshiba

Congratulations! You have purchased one of the finest color TVs on the market. The goal of this manual is to guide you through setting up and operating your Toshiba TV as quickly as possible. Please make sure you’ve received the following items: TV, remote control, batteries, manual, registration card, and extended service plan literature. If you did not receive all of the items, or any of the items are damaged or broken, please contact your Toshiba dealer. In addition, you may need to purchase other audio or video cables to connect your equipment. See “Connecting your TV” on page 2 for more information.

Please read all the safety and operating instructions carefully before you begin.

This manual applies to models 27A60, 32A60 and 36A60, and there are slight differences among them. The 36A60 is the model used for illustration purposes. Instructions in this manual are based on using the Remote Control. Check the model of your TV before using this manual.

Exploring your new TV

You can operate your TV by using the buttons on the front panel or the remote control. The back panel provides all the terminal connections you will need to connect other equipment to your TV.

32A60

 

36A60

 

 

 

 

 

 

 

RECALL

MUTE

POWER

 

 

 

 

 

27A60

 

 

 

1

2

3

 

 

 

 

 

 

 

 

4

5

6

 

 

 

 

7

8

9

 

 

 

 

 

 

 

CH RTN

 

 

 

 

100

0

ENT

 

 

 

 

 

CH

 

 

 

 

 

VOL MENU/

VOL

 

 

 

 

 

ENTER

 

 

 

 

 

 

CH

 

 

 

 

 

TV

 

 

 

 

 

 

 

CABLE

 

 

 

 

 

 

 

VCR

EXIT

 

 

 

ANT (75)

 

 

 

 

 

 

 

 

 

FAV CH

TV/VIDEO

 

 

ANT-1

OUT ANT-2

REC

TV/VCR

STOP

PLAY

 

 

 

 

 

 

DVD IN

OUT

IN

 

STILL

SOURCE PIP

COLOR

Y

VIDEO

VIDEO 2 VIDEO 1

SLOW

PAUSE

REW

FF

STREAM

 

VIDEO

 

 

 

 

INPUT

 

L

 

PIP CH

LOCATE SWAP

L

Cb

MONO

L/MONO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

S VIDEO

 

 

 

 

AUDIO

Cr

AUDIO

AUDIO

 

 

 

 

 

 

 

 

 

R

 

R

R

 

 

 

 

 

 

 

 

 

 

Selecting a location for the TV

Place the TV on the floor or on a sturdy platform in a location where light does not directly hit the screen.

Place the TV far enough from the walls to allow proper ventilation. Inadequate ventilation may cause overheating, which may damage the TV.

The model number and serial number are on the back of your TV. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV.

Model number: ________________________

Serial number: ________________________

Caution:

The plug has one prong wider than the other and will fit only one way into a standard electrical outlet (120 volt AC, 60 Hz). If the plug does not fit into the outlet, try turning it around. If the plug still does not fit, the outlet is probably non-standard and must be replaced by a qualified electrician. Do not tamper with the plug or try to force it into a non-standard outlet.

wide prong

Toshiba

Welcome to

Connecting your TV

Remote Control

Using the

Setting up your TV

Features

Using the TV’s

Appendix

Index

1

Connecting your TV

Connecting your TV

If you haven’t connected electronic equipment before, or you have been frustrated in the past, you may wish to read this section. (Cables are not supplied.)

A coaxial cable is the standard cable that comes in from your antenna or cable converter box. Coaxial cables use “F” connectors.

Audio and video cables are usually color coded according to use: yellow for video and red and white for audio. The red audio cable is for the stereo right channel, and the white audio cable is for the stereo (or mono) left channel. If you look at the rear panel of the TV, you will see that the terminals are color coded in the same manner as the cables.

S-video cables provide better picture performance. S-video cables can only be used with S-video compatible components.

ColorStreamTM cables come in sets of three and provide the best picture performance. ColorStream cables can only be used with ColorStream compatible components.

S-Video

ANTENNA Cable

Coaxial Cable

AUDIO

ColorStream

Cable

Cable

 

VIDEO

Cable

Connecting a VCR

This connection allows you to watch local channels and video programs, play or record on the VCR while watching TV, and to record from one channel while watching another channel.

You will need:

one coaxial cable

one pair of audio cables (only one cable for a mono VCR)

one video cable

 

Cable Lead-in from Cable Box

TV

or Antenna

 

 

 

 

 

 

 

 

ANT (75)

 

 

 

ANT-1

OUT

ANT-2

DVD IN

OUT

 

IN

COLOR

Y

VIDEO

VIDEO 2 VIDEO 1

STREAM

 

 

VIDEO

INPUT

 

L

 

 

 

 

 

 

L

Cb

MONO

 

L/MONO

 

 

 

 

 

 

 

 

S VIDEO

AUDIO

Cr

AUDIO

 

AUDIO

 

 

R

 

R

 

R

 

 

 

Stereo VCR

 

 

 

 

VIDEO

 

AUDIO

 

 

 

L

R

 

 

 

 

IN

 

 

IN from ANT OUT to TV

OUT

CH 3

 

CH 4

Caution:

Do not plug the TV in until you have finished connecting all of your equipment.

Caution:

If using a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable. If you have a S-VHS VCR, use the S-video connections and remove the video cable.

Do not connect the video cable and the S-video cable to Video-1 simultaneously.

2

Connecting a cable converter box

This connection allows you to watch cable and premium channels. You should keep your TV selected to ANT-1 so that you can use the TV features. When viewing premium channels, select ANT-2 and tune the TV to channel 3 or 4 (whichever channel is vacant in your area), then use the converter box to change channels.

You will need two coaxial cables.

From Cable

 

ANT (75)

 

ANT-1

OUT ANT-2

DVD IN

OUT

IN

COLOR

VIDEO

VIDEO 2 VIDEO 1

STREAM Y

 

VIDEO

INPUT

 

L

 

 

 

Cb

MONO

L/MONO

L

 

 

S VIDEO

AUDIO

Cr

AUDIO

AUDIO

 

 

 

R

 

R

R

 

 

IN OUT

cable converter box

Connecting a cable converter box and a VCR

This connection allows you to watch and record basic and premium cable channels, as well as watch videotapes. Change the TV to video mode. Tune the VCR to channel 3 or 4 (the same channel as the cable box output switch). Use the cable convertor box to change channels. The PIP source should be set to TV mode. (see page 24)

You will need:

three coaxial cables

one pair of audio cables (only one cable for a mono VCR)

one video cable

cable splitter

 

 

 

From Cable

 

 

 

 

 

 

 

IN

 

 

 

 

 

 

cable splitter

 

 

IN

 

 

OUT

OUT

 

 

 

 

 

 

cable converter box

 

OUT

 

 

 

 

TV

 

 

 

 

 

 

 

 

ANT (75)

 

 

 

 

 

ANT-1

OUT

ANT-2

 

 

DVD IN

OUT

 

 

IN

 

COLOR

Y

VIDEO

VIDEO 2 VIDEO 1

 

STREAM

 

 

 

VIDEO

 

INPUT

 

 

 

 

 

 

L

 

 

 

 

 

 

 

 

 

 

L

Cb

MONO

 

 

L/MONO

 

 

 

 

 

 

 

 

 

 

 

 

S VIDEO

 

AUDIO

Cr

AUDIO

 

 

AUDIO

 

R

 

R

 

 

R

 

 

 

 

 

 

Stereo VCR

 

 

 

 

 

 

VIDEO

 

AUDIO

 

 

 

 

 

L

R

 

 

 

 

 

 

IN

IN from ANT

OUT to TV

 

 

 

 

 

OUT

CH 3

 

CH 4

Caution:

If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable. If you have a S-VHS VCR, use the S-video connections and remove the video cable. Do not connect the video cable and the

S-video cable to Video-1 simultaneously.

Toshiba

Welcome to

Connecting your TV

Remote Control

Using the

Setting up your TV

Features

Using the TV’s

Appendix

Index

3

Connecting your TV

Connecting a DVD/satellite receiver and a VCR

This connection allows you to watch DVD/satellite, video and TV programs. You can record from the DVD/satellite receiver and TV, as well as record one TV channel while watching another channel.

You will need:

one coaxial cable

three pairs of audio cables (only one cable for a mono VCR)

two video cables

one S-video cable

To Satellite

DVD / Satellite Receiver

AUDIO

 

 

 

 

 

L OUT

 

 

 

 

 

VIDEO

 

 

 

 

Caution:

OUT

 

 

Satellite IN

S VIDEO

R

 

 

 

You can use a video cable instead of the

 

 

 

 

 

 

 

 

 

 

S-video cable, but the picture quality will

 

 

 

 

 

decrease. If you use a S-video cable between

TV

 

 

 

 

the TV and DVD/satellite receiver, make the

 

 

ANT (75)

 

audio connections only and remove the video

 

 

 

 

 

connection.

 

 

ANT-1

OUT ANT-2

 

Do not connect the video cable and the

INPUT

 

 

 

 

S-video cable to Video-1 simultaneously.

 

OUT

IN

 

Antenna

DVD IN

 

 

COLOR

 

VIDEO

VIDEO 2 VIDEO 1

 

 

STREAM Y

 

VIDEO

 

 

 

 

 

 

 

 

 

L

 

 

To

L

Cb

MONO

L/MONO

 

 

 

 

 

AUDIO

Cr

AUDIO

AUDIO S VIDEO

R

 

R

R

Stereo VCR

 

 

 

VIDEO

AUDIO

 

 

L

R

IN

 

IN from ANT OUT to TV

OUT

 

CH 3

 

 

CH 4

Connecting a DVD with ColorStream™ and a VCR

This connection allows you to watch DVD, video or TV programs and to record DVD or TV programs. You can record from one source and watch a program from another source. Your TV is capable of using ColorStream (color difference). Connecting your TV to a ColorStream compatible DVD, such as a Toshiba DVD, can greatly enhance picture quality and performance.

You will need:

one coaxial cable

three pairs of audio cables (only one cable for a mono VCR)

two video cables

one set of ColorStream video cables

4

Toshiba 32A60, 36A60, 27A60 User Manual

 

 

 

 

To Antenna

DVD Player with ColorStreamTM

 

 

 

 

 

AUDIO

 

 

 

 

 

 

L OUT

L

 

 

 

 

 

VIDEO

 

 

COLORSTREAMTM

 

 

OUT

 

 

 

S VIDEO

R

R

Y

Cb

Cr

 

 

 

 

 

 

TV

 

 

 

 

 

 

 

 

 

 

ANT (75)

 

 

 

 

 

ANT-1

OUT

ANT-2

 

 

DVD IN

OUT

 

IN

 

 

COLOR

Y

VIDEO

VIDEO 2 VIDEO 1

 

 

STREAM

 

 

VIDEO

 

 

INPUT

 

 

 

 

 

 

L

 

 

 

 

 

 

 

 

 

 

L

Cb

MONO

 

L/MONO

 

 

 

 

 

 

 

 

 

 

 

 

S VIDEO

 

 

AUDIO

Cr

AUDIO

 

AUDIO

 

 

 

 

 

 

R

 

R

 

R

Stereo VCR

VIDEO

AUDIO

 

 

L

R

IN

IN from ANT OUT to TV

OUT

CH 3

 

CH 4

Caution:

To play from the DVD, the DVD and TV must use ColorStream connections. To record from the DVD, the DVD and TV must select Video.

Connecting two VCRs

This connection allows you to record from one VCR to another VCR while watching a video program. You will also be able to record from one TV channel while watching another channel.

You will need:

one coaxial cable

two pairs of audio cables (only two cables for mono VCRs)

two video cables

Stereo VCR / Playback

VIDEO

AUDIO

 

 

 

L

R

 

 

 

IN

IN from ANT OUT to TV

 

 

 

 

 

OUT

CH 3

 

 

 

CH 4

TV

Stereo VCR / Recording

 

 

ANT (75)

 

 

 

 

ANT-1

OUT

ANT-2

Antenna

STREAM

Y

OUT

 

IN

DVD IN

 

 

COLOR

 

VIDEO

VIDEO 2 VIDEO 1

 

INPUT

 

 

 

VIDEO

To

 

L

 

 

L

Cb

MONO

 

L/MONO

 

 

 

 

 

 

S VIDEO

AUDIO

Cr

AUDIO

AUDIO

 

R

 

R

R

VIDEO

AUDIO

 

 

 

L

R

 

IN

IN from ANT OUT to TV

OUT

CH 3

 

CH 4

Caution:

Do not connect one VCR to the output and input jacks on the TV at the same time. If you are using a S-VHS VCR, use the S-video connections and remove the video cable. Do not connect the video cable and the S-video cable to Video-1 simultaneously.

Toshiba

Welcome to

Connecting your TV

Remote Control

Using the

Setting up your TV

Features

Using the TV’s

Appendix

Index

5

Connecting your TV

Connecting a camcorder

This connection allows you to watch video materials recorded on a camcorder.

You will need:

one pair of audio cables

one video cable

Camcorder

 

 

VIDEO

AUDIO

 

 

 

 

L OUT

 

 

 

 

R

TV Back

 

 

 

 

 

 

ANT (75)

 

 

ANT-1

OUT

ANT-2

DVD IN

OUT

 

IN

COLOR

Y

VIDEO

VIDEO 2 VIDEO 1

STREAM

 

 

VIDEO

 

 

 

INPUT

 

 

 

 

L

 

 

 

 

 

 

L

Cb

MONO

 

L/MONO

 

 

 

 

 

 

 

 

S VIDEO

AUDIO Cr

AUDIO

 

AUDIO

 

 

R

 

R

 

R

Connecting an audio amplifier

This connection allows you to use an audio amplifier to adjust the audio level. This also allows you to use external speakers.

To control the audio, turn on the TV and the stereo amplifier. You will need one pair of audio cables.

 

To Cable, Cable Box

 

 

Audio Amplifier

or Antenna

 

 

 

 

 

 

 

 

 

 

AUDIO

 

 

 

 

L

R

 

 

 

 

 

IN

 

 

 

 

 

OUT

 

 

TV

 

 

 

 

 

 

 

 

ANT (75)

 

 

 

 

ANT-1

OUT

ANT-2

 

DVD IN

OUT

 

IN

 

COLOR

Y

VIDEO

VIDEO 2 VIDEO 1

 

STREAM

 

 

VIDEO

 

 

 

 

 

INPUT

 

 

 

 

 

L

 

 

 

 

 

 

 

 

L

Cb

MONO

 

L/MONO

 

 

 

 

 

 

 

 

 

 

S VIDEO

 

AUDIO

Cr

AUDIO

 

AUDIO

 

 

 

 

R

 

R

 

R

Caution:

If you are using a S-VHS camcorder with a S-video output, connect this to the S-video input on the TV and remove the video cable. Do not connect the video cable and the S-video cable to Video-1 simultaneously.

6

Using the remote control

Preparing the remote control for use

With the remote control, you can operate your TV, most VCR models, and cable TV converters together, even if they are different brands. If you will be using your TV with a Toshiba VCR, your remote control is already programmed and ready to use. If you own different brands of VCRs and/or converters, you first have to program your remote control. (See “Programming the remote control for use with a VCR or a cable TV converter” on page 8.)

Installing the remote control batteries

To install the batteries:

1. Slide the battery cover off of the back of the remote control.

2.Install two “AA” size batteries. Match the + and - signs on the batteries to the signs on the battery compartment.

3.Slide the battery cover back on to the remote control until the lock snaps.

Using the remote control with a VCR or a cable TV converter

To control a Toshiba VCR:

Set the TV/CABLE/VCR switch to the VCR position. The buttons shown to the right will then control the VCR. The rest of the buttons will operate the TV as usual.

To control a cable TV converter:

Program the remote control to recognize the brand of your converter (see “Programming the remote control for use with a VCR or cable TV converter,” page 8). The shaded buttons shown on the right will control the cable TV converter.

Set the TV/CABLE/VCR switch to the CABLE position.

Note:

This remote control’s functions may or may not operate your VCR or cable TV converter. Refer to the owner’s manuals supplied with the equipment to see which features are available. In addition, the original controllers may have features not available on this remote control. If you would like to continue to use these features, you may want to use the original remote control.

Caution:

Dispose of your batteries in a designated disposal area. Do not throw your batteries into a fire.

Do not mix battery types or combine used batteries with new ones.

Remove dead batteries immediately to prevent battery acid from leaking into the battery compartment.

If you do not intend to use the remote control for a long time, remove the batteries.

RECALL

MUTE

POWER

POWER

 

 

 

1

2

3

 

4

5

6

 

7

8

9

Channel

Number

 

 

CH RTN

100

0

ENT

Enter

 

 

 

Channel

 

 

CH

 

 

VOL

MENU/

VOL

 

 

 

ENTER

 

 

 

 

CH

 

 

TV

 

 

 

TV/Cable/VCR

CABLE

 

 

 

 

VCR

 

EXIT

 

 

 

 

 

 

 

 

FAV CH

TV/VIDEO

TV/VCR

 

 

Play

REC

TV/VCR STOP

PLAY

Stop

 

 

 

 

 

STILL

SOURCE

PIP

Record

SLOW

PAUSE

REW

FF

Fast Forward

 

 

 

 

PIP CH

LOCATE SWAP

Rewind

 

 

 

 

 

 

 

 

Pause

 

 

 

 

Slow

Note:

Some cable/TV converters may require the ENT key to be pressed after pressing channel

numbers. (i.e. 0 – 2 – ENT)

Toshiba

Welcome to

Connecting your TV

Remote Control

Using the

Setting up your TV

Features

Using the TV’s

Appendix

Index

7

Remote Control

Using the

Programming the remote control for use with a VCR or a cable TV converter

This remote control is pre-programmed to operate Toshiba VCRs. To use VCRs or cable converters other than Toshiba models, you must follow the steps below before you operate your remote control.

1.Refer to the “VCR code table” or “Cable TV converter code table” on pages 9-10 to find the number that corresponds to the brand name of your VCR or converter.

If more than one number is listed, try each one separately until you find the one that works.

2.If you are reprogramming the remote control to operate your:

VCR, set the TV/CABLE/VCR switch on the remote control to VCR.

cable converter, set the TV/CABLE/VCR switch on the remote control to CABLE.

3.Hold down the RECALL button while using the Number buttons to enter the three-digit code number of your brand of VCR or converter.

4.Point the remote control at the VCR or converter and press POWER to test the code number.

If the VCR or converter turns on, you have entered the right number.

If the VCR or converter does not respond to the remote control, you may have entered the wrong number. Repeat steps 1-4 with another code number.

For future reference, write down the code numbers you used:

VCR code

_____________________

Cable code

_____________________

Recall

RECALL

MUTE

POWER

POWER

 

 

 

 

1

2

3

 

4

5

6

 

7

8

9

Number

 

 

CH RTN

 

100

0

ENT

 

CH

VOL MENU/ VOL

ENTER

CH

TV

CABLE

VCR EXIT

Note:

Each time you replace the batteries, you must reprogram the remote control.

Some newer VCRs are capable of working on either of two remote codes. These VCRs have a switch labeled “VCR1/VCR2.” If your VCR has this kind of switch, it may not respond to any of the code numbers for your VCR brand name. In this case, set the switch to the other position (VCR1 or VCR2) and reprogram the remote control.

8

Loading...
+ 30 hidden pages