1700 Series UPS
Transformer Module Connection Guide
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS. This sheet contains important instructions for Toshiba 1700 Series Transformer Modules. These instructions should be followed during the installation of the transformer module.
The ambient temperature range in which this unit should be operated or stored is 32°F to 104 °F (0°C to 40 °C).
This module should not be opened under any circumstances. There are no user servicable parts inside. For service contact your local Toshiba representative, or contact the Toshiba UPS marketing department toll-free at (800) 231-1412.
When adding transformer modules, be sure to use the proper model unit.
CAUTION
Misuse of this equipment could result in human injury and equipment damage. In no event will Toshiba Corporation be responsible or liable for either indirect or consequential damage or injury that may result from the use of this equipment.
Inspection/Installation
After Unpacking:
1)Check the unit for loose, broken, bent or otherwise damaged parts. If damage has occurred during shipment, keep all original packing materials for return to shipping agent. Warranty will not apply to units damaged during shipment.
2)Check to see that the rated capacity and the model number specified on the nameplate conform to the order specifications.
Installation Precautions
This transformer module is intended for use with a Toshiba 1700 Series UPS. Any electrical or mechanical modifications to this equipment, without prior written consent of Toshiba International Corporation will void all warranties and may void UL/CUL listing. Unauthorized modifications also can result in personal injury, death, or destruction of the equipment. When installing this transformer module follow all installation instructions and precautions as listed in the 1700 Series user manual
Figure 1
Module Layout
Model Number |
UF1-IO-024-6BG |
|
Capacity |
2400VA (1.68kW) |
|
Input voltage1 |
Single phase 208/240VAC, |
|
|
selectable |
|
Output voltage |
Single phase 120/240VAC |
|
Output voltage |
Within +/- 3%, steady state |
|
regulation |
||
|
||
Rated load power |
0.7 |
|
factor |
||
|
||
Rated output current |
9.5A @ 240V |
|
(rms) |
19A @120V |
|
|
Transformers |
|
Input |
Isolation |
|
Output |
Auto |
|
Mechanical Design |
||
Weight |
60 lbs (27.3 kg) |
|
Dimensions (in[mm]) |
6[152]H x 8[203]W x 19.7[502]D |
|
Note: No more than three modules should be stacked in any configuration. If the transformer module is being used with a system that has a second battery module at least one module must be placed beside the others. Stacking four modules could result in a tipping hazard.
56940-000
Loading...