Topcom FIDELITY 1081 User Manual

0 (0)
Topcom FIDELITY 1081 User Manual

,PSRUWDQW

),'(/,7< OLQHSKRQH\RXURQDFWLYDWHGEHWRKDVVHUYLFHWKLVFDOOHUGLVSOD\,'¶µ&DOOHUXVH7RWKLVDFWLYDWHWRFRPSDQ\WHOHSKRQH\RXUIURPVXEVFULSWLRQVHSDUDWHDQHHG\RX1RUPDOO\

IXQFWLRQ,I\RXGRQ¶WKDYHWKH&DOOHU,'IXQFWLRQRQ\RXUSKRQHOLQHWKHLQFRPLQJWHOHSKRQH

WHOHSKRQH\RXURIGLVSOD\WKHRQVKRZQEH127ZLOOQXPEHUV

86(5 *8,'(

9

PRGLILFDWLRQVWRUHVHUYDWLRQZLWKSXEOLVKHGDUHPDQXDOWKLVLQGHVFULEHGIHDWXUHV7KH

 

 

 

 

 

 

 

 

 

1 Before Initial use

Thank you for purchasing this new desktop caller ID telephone.

1.1Intended Purpose

This product is intend to be connected indoor to an analogue PSTN telephone line.

1.2Caller ID

To use ‘Caller ID’ (display caller), this service has to be activated on your phone line. Normally you need a separate subscription from your telephone company to activate this function. If you don’t have the Caller ID function on your phone line, the incoming telephone numbers will NOT be shown on the display of your telephone.

1.3Connection

The CE symbol indicates that the unit complies with the essential requirements of the R&TTE directive.

This device has been designed and manufactured to comply with the 98/482/EC rule, referent to the Pan European connection of a terminal to the Public Switching Telephone Network (PSTN) and following the established guidelines by the 1999/ 5/EC Directive about radio electric equipment and the reciprocal acknowledge of their conformity. However, due to the fact that there are some differences in the PSTNs from one country to another, the verifying measurements by themselves do not set up an unconditional guarantee for an optimal working in every connection point to the PSTN of any country.If any problem comes up, get in touch firstly with the distributor.

In any case, use conditions for which the product has been created should be respected as well as avoid its use in public or private networks with technical requirements clearly different to those established in the EU.

Topcom Fidelity 1081

2 Safety instructions

Please read carefully through the following information concerning safety and proper use. Make yourself familiar with all the functions of the equipment. Be careful to keep these advice notes and if necessary pass them on to a third party.

Do not place the basic unit in a damp room or at a distance of less than 1.5 m away from a water source. Keep water away from the telephone.

Do not use the telephone in environments where there is a risk of explosions.

Dispose of the batteries and maintain the telephone in an environment-friendly manner.

3 Cleaning

Clean the telephone with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive solvents.

4Disposal of the device (environment)

At the end of the product lifecycle, you should not throw this product into the normal household garbage but bring the product to a collection

point for the recycling of electrical and electronic equipments. The

symbol on the product, user guide and/or box indicate this.

Some of the product materials can be re-used if you bring them to a recycling point. By re-using some parts or raw materials from used products you make an important contribution to the protection of the environment.

Please contact your local authorities in case you need more information on the collection points in your area.

ENGLISH

Topcom Fidelity 1081

3

Loading...
+ 5 hidden pages