Texas Instruments TMDXEVM6472 User Manual

Size:
447.35 Kb
Download

Getting Started:

The EVMC6472 ships with a Power On self Test (POST) flashed in to I2C EEPROM. The POST will be automatically executed when the board is powered ON. POST will perform memory test and EMAC internal loopback test. At 'power on' state the user LEDs will glow. The LEDs will continue to glow while the POST utility is being copied from EEPROM to IRAM. User LEDs will turn OFF once the POST is copied to IRAM.

User LED-1and userLED-2will blink to indicate successful executions of memory and EMAC internal loopback tests respectively. These LEDs will turn OFF after completion of the tests.

Please refer EVM User Guide for software installation and other details.

Helpful Hints:

Plug in all the cables before turning the EVM ON to ensure proper grounding.

Do not unnecessarily flex the boards, while inserting cables. Excessive flexing can break the PCB traces.

Online Documentation

Most of the information on EVM6472 is available online. Some of the most commonly used resources are mentioned below:

EVM6472 Information: http://www.einfochips.com/TI-TMS320C6472-EVM.php

This link contains:

Hardware & software details

User Guide

Technical Reference Manual

TMS320C6472 Datasheet

Frequently Asked Questions (FAQ)

C6472 DSP Information: http://focus.ti.com/docs/prod/folders/print/tms320c6472.html

TI Worldwide Technical Support

Internet

TI Semiconductor Product Information Center Home Page support.ti.com

TI Semiconductor KnowledgeBase Home page support.ti.com/sc/knowledgebase

Product Information Centers

Americas

 

 

 

 

Phone

+1(972) 644-5580

Fax

+1(972)927-6377

Internet/Email

support.ti.com/sc/pic/americas.htm

 

 

 

Europe, Middle East and Africa

 

 

Phone

 

 

 

 

European Free Call

00800-ASK-TEXAS

 

 

 

(00800 275 83927)

 

International

 

+49 (0) 8161 80 2121

 

Russian Support

+7 495 981 0701

 

Note: The European Free Call (Toll Free) number is not active in all countries. If you have technical difficulty calling the free call number, please use the international number above.

Fax

+(49) (0) 8161 80 2045

 

 

Internet

support.ti.com/sc/pic/euro.htm

 

 

 

 

 

Japan

 

 

 

 

Fax

 

 

 

 

International

+81-3-3344-5317

Domestic

 

0120-81-0036

Internet/Email

 

 

 

 

International

support.ti.com/sc/pic/japan.htm

 

 

Domestic

www.tij.co.jp/pic

 

 

 

 

 

 

 

 

Asia

 

 

 

 

Phone

 

 

 

 

International

+91-80-413816651-

 

 

 

Domestic

Toll-Free-Number

 

Toll-Free-Number

Australia

800-999-084

Malaysia

 

1-800-80-3973

China

800-820-8682

New Zealand

0800-446-934

Hong Kong

800-96-5941

Philippines

 

1-800-765-7404

India

1-800-425-7888

Singapore

 

800-886-1028

Indonesia

001-803-8861-1006

Taiwan

 

0800-006800

Korea

080-551-2804

Thailand

001-800-886-0010

Fax

+886-2-2378-6808

Email

 

tiasia@ti.com

Internet

support.ti.com/sc/pic/asia.htm

 

ti-china@ti.com

 

 

 

 

 

 

 

Important Notice: The products and services of Texas Instruments Incorporated and its subsidiaries described herein are sold subject to TI's standard terms and conditions of sale. Customers are advised to obtain the most current and complete information about TI products and services before placing orders. TI assumes no liability for applications assistance, customer's applications or product designs, software performance, or infringement of patents. The publication of information regarding any other company's products or services does not constitute TI's approval, warranty or endorsement thereof.

The floating bar is a trademark of Texas Instruments.

All other trademarks are the property of their respective owners

TMDXEVM6472

TMS320C6472 Evaluation Module

Quick Setup Guide

 

Boot Mode/Configuration

 

 

 

 

Settings

User

 

 

 

 

 

 

 

 

 

 

 

 

Switches

C6472

Dual Giga Ethernet

 

 

HPI - DC

(6 Core DSP)

 

 

User

 

LEDs-I2C

 

 

 

 

 

 

 

 

LEDs

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RS232-

Serial

USB mini-B

On-Board

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Embedded

 

 

 

 

 

 

 

 

Emulation

 

 

 

 

 

 

 

DDR2 RAM

 

Warm

JTAG-

JTAG-DSP

Cold

256 MB

Reset

Reset

FPGA

 

 

 

 

 

 

 

 

 

 

 

FPGA

 

 

 

 

NAND Flash

 

 

 

 

 

 

128 MB

 

 

 

AMC-

Type B+

12V DC

©2009 Texas Instruments Incorporated

eInfochips Literature: EVM6472_QSG_0.2

w w w . e i n f o c h i p s . c o m

C6472 Evaluation Module

4

2

1

3

The TMDXEVM6472 (Evaluation Module) kit includes:

TMS320C6472 Evaluation Module (Printed circuit board assembly)

Power supply and power cord

USB Cable for on-boardJTAG emulation Ethernet cable

Software (DVD) and documentation

Ensure EVM

To run Out-Of-Box

configuration switches

demo through

are set as shown.

NAND, configure

1

the switches as

1ashown above.

1a The EVMC6472 is also shipped

with an Out-Of-BoxDemo application flashed into NAND. This is a network based application which starts an HTTP server and a TELNET server with the following static IP address: 192.168.2.100. The application enables the following:

User switch 1 OFF - Static IP set as 192.168.2.100 (recommended)

User switch 1 ON - Obtains IP address from DHCP server

In order to connect to the board, the test PC should be configured with static IP address: 192.168.2.101. Once the User LEDs are OFF (indicating successful NAND boot) the user can access the following URL through a browser to view Out-Of-Boxdemo: http://192.168.2.100

Connect the USB miniB 2cable to J7 plug for on

board embedded emulation, as shown in figure. (For use with CCS debugger only)

Connect Ethernet switch / 3router / PC to the lower Giga

Ethernet port (J3) of EVM6472 board using an Ethernet cable to access EMAC0. Use upper Giga Ethernet port of J3 to access EMAC1.

Connect the 12V DC 4power adapter

(supplied with the kit) to power jack (J6).

©2009 Texas Instruments Incorporated

eInfochips Literature: EVM6472_QSG_0.2

©2009 Texas Instruments Incorporated

eInfochips Literature: EVM6472_QSG_0.2