Loading...
DEM-DSD1796/PCM1795/PCM1796/PCM1798
DSD1796/PCM1795/PCM1796/PCM1798 Evaluation Module
User's Guide
Literature Number: SLEU057A
September 2004–Revised May 2009
2 |
SLEU057A–September 2004–Revised May 2009 |
Submit Documentation Feedback
Contents
Preface ............................................................................................................................... |
|
5 |
|
1 |
Description ................................................................................................................ |
7 |
|
1.1 |
Functional Block Diagram .................................................................................................. |
8 |
|
1.2 |
EVM Features ................................................................................................................ |
8 |
|
1.3 |
System Requirements....................................................................................................... |
9 |
|
1.4 |
Electrostatic Discharge Warning........................................................................................... |
9 |
|
1.5 |
Function Control for DAI Interface Format ............................................................................... |
9 |
|
1.6 |
Reset Operation.............................................................................................................. |
9 |
|
1.7 |
SW006 Operation Control for DAC ...................................................................................... |
10 |
|
1.8 |
Jumper Connection ........................................................................................................ |
10 |
|
1.9 |
Demonstration Software................................................................................................... |
10 |
|
2 |
Schematics, PCB Layout, and Bill of Materials ............................................................. |
11 |
|
2.1 |
DEM-DAI/ASDAC Printed Circuit Board Layout........................................................................ |
12 |
|
2.2 |
DEM-AS/CDAC Printed Circuit Board Layout .......................................................................... |
15 |
|
2.3 |
DEM-DAI/ASDAC Schematics............................................................................................ |
17 |
|
2.4 |
DEM-AS/CDAC Schematics .............................................................................................. |
19 |
|
2.5 |
Component Lists ........................................................................................................... |
20 |
|
|
2.5.1 |
DEM-AS/CDAC_96/98 Parts List................................................................................ |
20 |
|
2.5.2 |
DEM-DAI/ASDAC_96/98 Parts List ............................................................................. |
20 |
Revision History................................................................................................................. |
22 |
||
Important Notices............................................................................................................... |
23 |
||
SLEU057A–September 2004–Revised May 2009 |
Contents |
3 |
Submit Documentation Feedback
|
|
www.ti.com |
|
List of Figures |
|
1-1 |
DEM-DSD1796/PCM1795/PCM1796/PCM1798 Block Diagram ...................................................... |
8 |
2-1 |
DEM-DAI/ASDAC Silkscreen ............................................................................................. |
12 |
2-2 |
DEM-DAI/ASDAC (Top View) ............................................................................................ |
13 |
2-3 |
DEM-DAI/ASDAC (Bottom View)......................................................................................... |
14 |
2-4 |
DEM-AS/CDAC Silkscreen................................................................................................ |
15 |
2-5 |
DEM-AS/CDAC (Top View) ............................................................................................... |
15 |
2-6 |
DEM-AS/CDAC (Bottom View) ........................................................................................... |
16 |
2-7 |
DEM-DAI/ASDAC Analog Section (Sockets for Daughterboard and Low-Pass Filter)............................ |
17 |
2-8 |
DEM-DAI/ASDAC Connector and Regulator ........................................................................... |
17 |
2-9 |
DEM-DAI/ASDAC Digital Section (Digital Audio Interface) ........................................................... |
18 |
2-10 |
DEM-AS/CDAC ............................................................................................................. |
19 |
|
List of Tables |
|
1-1 |
Digital Audio Receiver Configuration...................................................................................... |
9 |
1-2 |
SW006 Options............................................................................................................. |
10 |
2-1 |
Bill of Materials ............................................................................................................. |
20 |
2-2 |
Bill of Materials ............................................................................................................. |
20 |
4 |
List of Figures |
SLEU057A–September 2004–Revised May 2009 |
Submit Documentation Feedback
Preface
SLEU057A–September 2004–Revised May 2009
Read This First
About This Manual
This document provides the information needed to set up and operate the DEM-DSD1796/PCM1795/PCM1796/PCM1798 EVM evaluation module, a test platform for the 24-bit, 192-kHz, sampling stereo DSD1796, PCM1795, PCM1796, and PCM1798 audio digital-to-analog converters (DACs). For a more detailed description of these devices, refer to the specific device product data sheet available from the Texas Instruments web site at http://www.ti.com.
How to Use This Manual
Throughout this document, the abbreviation EVM and the term evaluation module are synonymous with the DEM-DSD1796/PCM1795/PCM1796/PCM1798 EVM. Unless specifically noted, the information presented in this manual applies to the DSD1796, PCM1795, PCM1796, and PCM1798 audio stereo DACs.
Chapter 1 describes the hardware setup guide for the EVM, including the necessary information required to configure the EVM switches and jumpers for product evaluation. This chapter also explains how to use the software provided with the DEM-DSD1796/PCM1795/PCM1796/PCM1798 EVM for controlling the DAC.
Chapter 2 includes the EVM electrical schematics, printed circuit board (PCB) layouts, and the bills of material for both the DEM-DSD1796/PCM1795/PCM1796/PCM1798, the DEM-AS/CDAC, and the DEM-DAI/ASDAC.
Information About Cautions and Warnings
This document contains caution statements.
CAUTION
This is an example of a caution statement. A caution statement describes a situation that could potentially damage your software or equipment.
The information in a caution or a warning is provided for your protection. Please read each caution and warning carefully.
If You Need Assistance
If you have questions regarding either the use of this evaluation module or the information contained in the accompanying documentation, please contact the Texas Instruments Product Information Center at (972) 644–5580 or visit the TI web site at www.ti.com.
FCC Warning
This equipment is intended for use in a laboratory test environment only. It generates, uses, and can radiate radio frequency energy and has not been tested for compliance with the limits of computing devices pursuant to subpart J of part 15 of FCC rules, which are designed to provide reasonable protection against radio frequency interference. Operation of this equipment in other environments may cause interference with radio communications, in which case the user at his own expense is required to take whatever measures may be required to correct this interference.
Microsoft, Windows are registered trademarks of Microsoft Corporation.
I2S is a trademark of NXP Semiconductors.
TOSLINK is a trademark of Toshiba Corporation.
All other trademarks are the property of their respective owners.
SLEU057A–September 2004–Revised May 2009 |
Read This First |
5 |
Submit Documentation Feedback |
|
|
Trademarks |
www.ti.com |
Trademarks
All trademarks are the property of their respective owners.
6 |
Read This First |
SLEU057A–September 2004–Revised May 2009 |
|
|
Submit Documentation Feedback |
Chapter 1
SLEU057A–September 2004–Revised May 2009
Description
The DEM-DSD1796/PCM1795/PCM1796/PCM1798 is an evaluation fixture for the DSD1796/PCM1795/ PCM1796/PCM1798 series of 24-bit, 192-kHz sampling stereo DACs. This EVM provides all necessary connectors and circuitry for interfacing to audio test systems and commercial audio equipment.
Topic |
|
Page |
1.1 |
Functional Block Diagram............................................................ |
8 |
1.2 |
EVM Features............................................................................. |
8 |
1.3 |
System Requirements ................................................................. |
9 |
1.4 |
Electrostatic Discharge Warning .................................................. |
9 |
1.5 |
Function Control for DAI Interface Format ..................................... |
9 |
1.6 |
Reset Operation.......................................................................... |
9 |
1.7 |
SW006 Operation Control for DAC .............................................. |
10 |
1.8 |
Jumper Connection................................................................... |
10 |
1.9 |
Demonstration Software ............................................................ |
10 |
SLEU057A–September 2004–Revised May 2009 |
Description |
7 |
Submit Documentation Feedback |
|
|
Functional Block Diagram |
www.ti.com |
1.1Functional Block Diagram
Figure 1-1 illustrates the functional block diagram of the DEM-DSD1796/PCM1795/PCM1796/PCM1798 EVM.
|
|
I/V |
|
|
|
CN003 |
5534a |
|
|
|
Serial |
|
BAL Amp |
LchOUT |
|
Connector |
|
||
|
|
5534a |
(4.5 VRMS) |
|
|
|
|
||
|
|
I/V |
|
|
|
|
5534a |
|
|
S/PDIF IN |
|
DSDS1796 |
|
|
DAI |
PCM1795 |
|
|
|
OPT |
|
|
||
CS8414 |
PCM1796 |
|
|
|
Coax |
|
|
||
|
PCM1798 |
|
|
|
|
|
|
|
|
|
|
I/V |
|
|
|
|
5534a |
|
|
|
|
|
BAL Amp |
RchOUT |
|
SW001−003 |
|
5534a |
(4.5 VRMS) |
|
|
|
|
|
|
Mode Control |
I/V |
|
|
|
|
|
|
|
|
|
5534a |
|
|
|
|
DEM-AS/CDAC Daughter Card |
|
|
|
|
3.3-V |
|
|
|
|
Regulator |
|
|
|
|
+VCC |
±AVCC |
|
|
|
(5 V) |
(±15 V) |
|
|
Figure 1-1. DEM-DSD1796/PCM1795/PCM1796/PCM1798 Block Diagram |
|
||
1.2EVM Features
The DEM-DSD1796/PCM1795/PCM1796/PCM1798 series of stereo DACs consist of a DAI (S/PDIF) section that uses a DSD1796/PCM1795/PCM1796/PCM1798 DAC section, a differential current/voltage (I/V) section, and a balanced amplifier with a post-low-pass filter (LPF) section.
The DEM-DSD1796/PCM1795/PCM1796/PCM1798 requires a 5-V digital power supply for its digital circuits, a 5-V analog power supply for the device itself, and a ±15-V analog power supply for the balanced amplifier circuits.
The DAI section has both coaxial and optical inputs that are switch-selectable and capable of handling sampling rates up to 96 kHz.
The DSD1796/PCM1795/PCM1796/PCM1798 accepts PCM audio data input at a sampling rate up to 192
kHz, or a 64-fS DSD signal input, as determined by functional control settings and jumper connections on the board.
This evaluation fixture uses the DEM-DSD1796/PCM1795/PCM1796/PCM1798 demonstration board and demonstration software for functional evaluation and operational control of the DSD1796/PCM1795/PCM1796/PCM1798 DAC device.
8 |
Description |
SLEU057A–September 2004–Revised May 2009 |
Submit Documentation Feedback
Loading...