Models BC10/BW11
Razzle Blender
Operating Instructions
052544-M
2/1/01
Complete this page for quick reference when service is required:
Taylor Distributor:
Address:
Phone:
Service:
Parts:
Date of Installation:
Information found on the data label:
Model Number:
Serial Number:
Electrical Specs: Voltage |
|
Cycle |
|||||
Phase |
|
|
|
|
|
||
Maximum Fuse Size: |
|
|
|
|
A |
||
Minimum Wire Ampacity: |
|
|
|
|
A |
E February, 2001 Taylor All rights reserved.
052544--M
The word Taylor and the Crown design
are registered trademarks in the United States of America and certain other countries.
Taylor Company
750 N. Blackhawk Blvd.
Rockton, IL 61072
Table of Contents
______________________________________________________________________________
Section 1 |
To the Installer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
1 |
Electrical Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
1 |
|
Foot Pedal Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
1 |
|
Section 2 |
To the Operator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
2 |
Warranty on Taylor Blenders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
2 |
|
Section 3 |
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
3 |
Section 4 |
Operator Parts Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
6 |
BC10 . . . . . |
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
6 |
BW11 . . . . . |
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
8 |
Accessories |
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
10 |
Optional Dispensers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
11 |
|
Optional Large Candy Dispenser Canister Assembly (X53638--1) . . . . . . . . . . . |
17 |
|
Optional Small Candy Dispenser Canister Assembly (X53638--2) . . . . . . . . . . . . |
18 |
|
Section 5 |
Important: To the Operator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
19 |
Control Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
19 |
|
Foot Pedal |
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
19 |
Reset Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
19 |
|
Splash Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
19 |
|
Motor . . . . . |
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
20 |
Permanent Agitator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
20 |
|
Section 6 |
Operating Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
21 |
Mixing Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
21 |
|
Cleaning . . |
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
22 |
Permanent Agitator Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
23 |
|
Sanitizing . |
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
23 |
Section 7 |
Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
24 |
Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
30 |
Note: Continuing research results in steady improvements; therefore, information in this manual is subject to change without notice.
Models BC10/BW11 |
Table of Contents |
Notes:
Table of Contents |
Models BC10/BW11 |
Section 1 |
To the Installer |
|
|
This machine is designed for indoor use only.
DO NOT install the machine in an area where a water jet could be used to clean or rinse the machine. Failure to follow this instruction may result in serious electrical shock.
Electrical Connections
Each unit requires one power supply. Check the data labels on the unit for fuse, wire ampacity and electrical specifications. Refer to the wiring diagram for proper power connections.
In the United States, this equipment is intended to be installed in accordance with the National Electrical Code (NEC), ANSI/NFPA 70--1987. The purpose of the NEC code is the practical safeguarding of persons and property from hazards arising from the use of electricity. This code contains provisions considered necessary for safety. Compliance therewith and proper maintenance will result in an installation essentially free from hazard!
In all other areas of the world, equipment should be installed in accordance with the existing local codes. Please contact your local authorities.
Stationary appliances which are not equipped with a power cord and a plug or other device to disconnect the appliance from the power source must have an all--pole disconnecting device with a contact gap of at least 3 mm installed in the external installation.
CAUTION: THIS EQUIPMENT MUST BE PROPERLY GROUNDED! FAILURE TO DO SO CAN RESULT IN SEVERE PERSONAL INJURY FROM ELECTRICAL SHOCK!
Foot Pedal Instructions
To use the momentary foot pedal to control the mixer, connect the foot pedal to a grounded wall outlet. Plug the mixer cord into the back of the foot pedal plug. In this mode, both the control switch and the foot pedal must be activated. Leave the control switch in the “ON” position when you wish to use the momentary foot control. Make sure the foot control is kept where it will not be activated accidently. The foot guard is an additional design feature which helps prevent accidental use of the foot pedal.
|
|
040406 |
|
|
|
Models BC10/BW11 |
1 |
To the Installer |
|
|
|
Section 2 |
To the Operator |
|
|
The mixer you have purchased has been carefully engineered and manufactured to give you dependable operation. Mixing various candies, cookies, fruits, nuts, liquid flavors, and other food items into ice cream or frozen yogurt has made unlimited flavor combinations and product textures available.
The development of counter and wall mount mixers have made this unlimited resource available to even very small retail outlets and to those facilities where counter space is limited.
The mixer, when properly operated and cared for, will produce a consistent, quality product. Like all mechanical products, it will require cleaning and maintenance. A minimum amount of care and attention is necessary if the operating procedures outlined in this manual are followed closely.
This Operator’s Manual should be read before operating or performing any maintenance on your equipment.
In the event that you should require technical assistance, please contact your local authorized Taylor Distributor.
NSF approvals of the Models BC10 and BW11 were obtained by the Vita--Mix Corporation, 8615 Usher Road, Cleveland, Ohio 44138.
If the crossed out wheeled bin symbol is affixed to this product, it signifies that this product is compliant with the EU Directive as well as other similar legislation in effect after August 13, 2005. Therefore, it must be collected separately after its use is completed, and cannot be disposed as unsorted municipal waste.
The user is responsible for returning the product to the appropriate collection facility, as specified by your local code.
For additional information regarding applicable local laws, please contact the municipal facility and/or local distributor.
Warranty on Taylor Blenders
Caution: This warranty is valid only if required exchanges are provided by an authorized Taylor Distributor.
Warranty Terms
This warranty covers only defects in material and workmanship under normal use and service. The Taylor Distributor will replace those components that become defective as follows:
SFive years from date of installation for the blender.
SOne year from date of installation for the product dispensers.
Not included are the following items:
SLabor, transportation charges, and sales or use taxes associated with the removal and return of the defective part and the installation of the replacement part.
SExternal power cords, and electrical grounding.
SWear items: agitator shaft, splash shield, and foot pedal.
SReplacements required because of operator misuse as defined below, fire or other casualty, normal wear or deterioration.
Misuse includes the owner’s failure to handle parts properly, resulting in breakage. Misuse is also defined as allowing unauthorized service agents to attempt repair on units.
For validation of warranty, this unit must be registered at the Taylor Company within thirty (30) days of installation.
050819
To the Operator 2 Models BC10/BW11
Section 3 |
|
|
Safety |
||
|
|
|
|
||
We at Taylor Company are concerned about the safety |
|
|
|
||
of the operator when he or she comes in contact with |
|
DO NOT use a water jet to clean or rinse this |
|||
the blender and its parts. Taylor has gone to extreme |
|
||||
efforts to provide built-in safety features to protect both |
|
unit. Failure to follow these instructions may result in |
|||
you and the service technician. As an example, |
|
serious electrical shock. |
|||
warning labels have been attached to the unit to further |
|
|
|
||
point out safety precautions to the operator. |
|
|
|
|
|
IMPORTANT -- Failure to adhere to the |
|
S DO NOT allow children or untrained |
|||
following safety precautions may result in severe |
|
||||
personal injury or death. Failure to comply with |
|
personnel to operate this machine. |
|||
these warnings may damage the machine and its |
|
|
|
||
components. Component damage will result in |
|
S DO NOT operate the unit unless all service |
|||
part replacement |
expense and service |
repair |
|
||
|
panels and access doors are restrained with |
||||
expense. SAVE |
THESE INSTRUCTIONS |
FOR |
|
||
|
screws. |
||||
FUTURE REFERENCE |
|
|
|||
|
|
|
|
||
|
|
|
|
S AVOID contact with the agitator shaft and |
|
To Operate Safely: |
|
|
other moving parts. |
||
|
|
|
|
S DO NOT disassemble or install parts unless |
|
DO NOT operate the machine without reading |
|
the control switch is in the “OFF” position. |
|||
|
|
|
|||
this operator’s manual. Failure to follow this instruction |
|
S Make sure the splash guard is installed prior |
|||
may result in equipment damage, poor performance, |
|
||||
|
to operating the appliance. |
||||
health hazards, or personal injury. |
|
|
|||
|
|
|
|
S Always use the foot pedal guard and avoid |
|
|
|
|
|
accidental use of the foot pedal. When using |
|
S DO NOT operate the machine unless it is |
|
the foot pedal, make sure the appliance is |
|||
|
located where accidental contact with the |
||||
properly grounded. |
|
|
|||
|
|
pedal is not likely. When the mixer is not in |
|||
|
|
|
|
||
S DO NOT attempt any repairs unless the |
|
use, place the front switch in the “OFF” |
|||
main power supply to the machine has been |
|
position to avoid accidental use of the pedal. |
|||
disconnected. |
|
|
(Note: Some international units are not |
||
S DO NOT operate the machine with larger |
|
equipped with this feature.) |
|||
|
|
|
|||
fuses than specified on the data label. |
|
|
Failure to follow these instructions may result in severe |
||
|
|
|
|
||
S DO NOT operate this appliance if the power |
|
personal injury from hazardous moving parts. |
|||
|
|
|
|||
cord is damaged. |
|
|
|
|
|
S DO NOT use this appliance outdoors. |
|
|
DO NOT operate this appliance if it |
||
Failure to follow these instructions may result in |
|
||||
|
malfunctions or is damaged in any way. Failure to |
||||
electrocution. Contact your local authorized Taylor |
|
follow this instruction may result in injury or component |
|||
Distributor for service. |
|
|
damage. |
||
|
|
|
|
040406 |
|
|
|
|
|
|
|
Models BC10/BW11 |
|
3 |
Safety |
||
|
|
|
|
|
|
Make sure the mixer is level and sitting or mounted solidly on a sturdy surface during operation. Failure to comply may result in personal injury or equipment damage.
DO NOT use attachments not recommended or sold by the Taylor Company. Doing so may cause fire, electric shock, injury, or equipment damage.
DO NOT allow the power cord to hang over the edge of the counter or touch hot surfaces. Failure to comply may result in an electrical fire.
WARNING!
Some consumers are highly allergic to peanuts, peanut oil, and peanut dust. In some severe cases, peanut allergy reactions can cause death. When blending product with peanuts, make sure excess product is cleaned from the agitator shaft to eliminate the fear of product carryover.
NOISE LEVEL: Airborne noise emission does not exceed 78 dB(A) when measured at a distance of 1.0 meter from the surface of the machine and at a height of 1.6 meters from the floor.
040406
Safety 4 Models BC10/BW11
Notes:
Models BC10/BW11 |
5 |
Safety |
|
|
|
Section 4 Operator Parts Identification
BC10
Operator Parts Identification |
6 |
Models BC10/BW11 |
|
|
|
BC10 Exploded View Parts Identification
ITEM |
DESCRIPTION |
PART NO. |
|
|
|
|
|
1 |
CAP-MIXER |
051484 |
|
|
|
|
|
2 |
SCREW-MIXER-RETAINER CAP |
051487 |
|
|
|
|
|
3 |
BRAKE (SEAL) MIXER |
051485 |
|
|
|
|
|
4 |
MOTOR-MIXER (120V) |
051481-12 |
|
|
|
||
MOTOR-MIXER (220/240V) |
051481-27 |
||
|
|||
|
|
|
|
4a |
PLATE-MOTOR MOUNTING TOP |
051481-4 |
|
|
|
|
|
4b |
BEARING-MIXER MOTOR |
051481-2 |
|
|
|
|
|
4c |
PLATE-MOTOR MTG. BOTTOM |
051481-1 |
|
|
|
|
|
5 |
CAPACITOR-MIXER (220/240V) |
051483 |
|
|
|
||
CAPACITOR-MIXER (120V) |
051482 |
||
|
|||
|
|
|
|
6 |
FRAME-MIXER-STAINLESS STL |
051480 |
|
|
|
|
|
|
BREAKER-CIRCUIT-MIXER- |
051490 |
|
7 |
3A-120V |
|
|
BREAKER-CIRCUIT-MIXER- |
051489 |
||
|
|||
|
5A-220/ 240V |
|
|
|
|
|
|
8 |
SCREW-MIXER-MTG PIVOT PIN |
051508 |
|
|
|
|
|
9 |
CORD-MIXER-18/3 GROUNDED |
051491 |
|
|
|
|
|
10 |
PEDAL-FOOT-MIXER-115V |
052451 |
|
|
|
|
|
10* |
PEDAL-FOOT-MIXER-220V |
053192 |
|
|
|
|
|
10a |
TRANSMITTER FOOT PEDAL |
052451-1 |
|
|
|
|
|
10b |
CONTROLLER-FOOT PEDAL- |
052451-2 |
|
|
115V |
|
ITEM |
DESCRIPTION |
PART NO. |
|
|
|
10b* |
SWITCH-PRESS.-FOOT PEDAL- |
053192-1 |
|
220V |
|
10c |
TUBE-AIR-FOOT PEDAL |
052451-3 |
|
|
|
11 |
GUARD-SWITCH-MIXER |
051505 |
|
|
|
12 |
SWITCH-ROCKER-MIXER |
051488 |
|
|
|
13 |
SCREW-MIXER-MOTOR MTG |
051493 |
|
|
|
14 |
PIN PIVOT-MIXER |
051507 |
|
|
|
15 |
SLINGER-MIXER |
051494 |
|
|
|
16 |
SHAFT-MIXER-AGITATOR-EXT |
051495 |
|
|
|
17 |
AGITATOR-MIXER-PERM SOFT |
051497 |
|
|
|
18 |
FOOT A.-MIXER-PLUGGED |
051500 |
|
|
|
19 |
GUARD-SPLASH-MIXER |
051499 |
|
|
|
20 |
LABEL-MIXER-COUNTER- |
052250 |
|
RAZZLE |
|
* |
CAP-CRIMP-MIXER |
051504 |
|
|
|
* |
JUMPER WIRES-MIXER |
051486 |
|
|
|
* |
MANUAL-OPERATOR-MIXER |
052544-M |
|
|
|
* |
RELIEF-STRAIN-MIXER-R ANGLE |
051492 |
|
|
|
* |
TAB INSULATOR-MIXER |
051509 |
|
(CAPACITOR) |
|
* |
TIES-CABLE-MIXER |
051502 |
|
(CAPACITOR) |
|
* NOT SHOWN
Models BC10/BW11 |
7 |
Operator Parts Identification |
|
|
|