Targus Wireless Multimedia Presenter with Trackball User Manual

Size:
3.68 Mb
Download

Wireless Multimedia Presenter with Trackball

USER GUIDE

CAUTION

LASER RADIATION. DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. CLASS I LASER PRODUCT.

NEVER POINT A LASER BEAM INTO A PERSON’S EYES OR VIEW A LASER BEAM DIRECTLY, AS PROLONGED EXPOSURE CAN BE HAZARDOUS TO THE EYES.

MOMENTARY EXPOSURE FROM A LASER POINTER, SUCH AS AN INADVERTENT SWEEP OF THE LIGHT ACROSS A PERSON'S EYES, MAY CAUSE TEMPORARY FLASH BLINDNESS SIMILAR TO THE EFFECT OF A CAMERA FLASH BULB. ALTHOUGH THIS CONDITION IS TEMPORARY, IT CAN BECOME MORE DANGEROUS IF THE EXPOSED PERSON IS ENGAGED IN A VISION-CRITICALACTIVITY SUCH AS DRIVING.

2

TARGUS WIRELESS

MULTIMEDIA

PRESENTER WITH

TRACKBALL

Introduction

Congratulations on your purchase of the Targus Wireless Multimedia Presenter with Trackball. The presenter is a combination trackball mouse and multimedia presenter. With thepresenter you can control cursor movement anywhere within 20m of its receiver and project ared laser pointer beam.

NOTE: THE ACTUAL EFFECTIVE DISTANCE MAY INCREASE OR DECREASE DEPENDING ON THE SURROUNDING ENVIRONMENT.

The Targus Wireless Multimedia Presenter also features primary and secondary buttons (left and right mouse click buttons) that emulate the page up/down keys when in Presenter Mode and volume up/volume down keys when in Multimedia Mode.

System Requirements

Hardware

PC

USB interface

Operating System

Windows® 98SE/ME/2000/XP

Windows Vista™

3

Targus Wireless Multimedia Presenter with Trackball

Installing the Batteries

1 Remove the battery cover located on the bottom of the presenter.

Connect Button

Battery Cover

Batteries

2 Insert the supplied batteries, making sure that the positive (+) and negative (-)ends ofeach battery match the polarity indicators inside the battery housing.

WARNINGS: WHEN REPLACING THE BATTERIES, YOU MAY USE ALKALINE OR OTHERHEAVY-DUTYNIMH BATTERIES. NEVER COMBINE ANALKALINE WITH ANIMH BATTERY IN A DEVICE.

AVOID MIXING NEW AND USED BATTERIES IN A DEVICE.

3 Slide the battery cover back into position until it “clicks” firmly into place.

4

Targus Wireless Multimedia Presenter with Trackball

OFF

ON

4 Turn the power switch located on the side of the presenter to the “On” position.

Connecting the Receiver and Installing theDefault Device Drivers

1 Plug the USB receiver into an available USB port on your computer.

Windows®98SE/Me Operating Systems

The Add New Hardware Wizard appears.If it does not, the operating system has installed the default driver automatically. No othersteps are necessary.

2Click Next.The locate driver screen appears.

3Select Search for the best driver for your device. (Recommended)and then click Next.The wizard searches for

the appropriate device driver.

4 Click Next, thenFinish to complete the driver installation.

5

Targus Wireless Multimedia Presenter with Trackball

Windows®2000/XP & Windows Vista™

The Found New Hardware Wizard appears.

If it does not, the operating system has installed the default driver automatically. No othersteps are necessary.

5Click Next.The wizard searches for the appropriate device driver.

6Click Next, thenFinish to complete the driver installation.

Establishing a Communications Link

After your computer detects the USB receiver and the driver software is installed, you mustestablish a communications link between the presenter and its receiver BEFORE you canuse the presenter.

Make sure that your computer is turned on and has detected the USB receiver before youestablish a communications link.

The light emitter diode (LED) illuminates to indicate your computer has detected the receiver.

1 Press and release the Connection button on the receiver.

Connection button

The receiver’s LED turns off.

2 Press and release the Connection button, located on the bottom of the presenter.The receiver’s LED resumes glowing when the set up has been completed.

You are now ready to use the presenter.

6

Targus Wireless Multimedia Presenter with Trackball

Using the Presenter

The presenter’s default setting is Mouse mode. To change modes, press the Mode select button. The mode indicator LED illuminates to indicate the mode you are currently in:

Green LED - Mouse mode

Red LED - Presentation mode

Yellow LED - Multimedia mode

Functionality

The presenter provides 3 working modes:

Mouse Mode

In Mouse Mode the device will work as a Mouse and provides functionalities as follows:

NOTE: THE FOLLOWING KEYS DO NOT WORK UNDER THEWINDOWS98 OPERATING SYSTEM:

Internet hot key

E-mailhot key

7

Targus Wireless Multimedia Presenter with Trackball

Presenter Mode

In Presenter Mode the device will work as a Wireless Presenter and provide the functionalities as follows:

NOTE: THE FOLLOWING KEYS DO NOT WORK UNDER THEWINDOWS98 OPERATING SYSTEM:

Internet hot key

E-mailhot key

8

Targus Wireless Multimedia Presenter with Trackball

Multimedia Mode

In Multimedia Mode the device will provide functionalities as follows:

NOTE: THE FOLLOWING KEYS DO NOT WORK UNDER THEWINDOWS98 OPERATING SYSTEM:

Internet hot key

Multimedia functions: play/pause, volume up, volume down

E-mailhot key

9

Targus Wireless Multimedia Presenter with Trackball

Laser Pointer

The laser pointer can be activated anytime, in all modes, by pressing the laser pointer trigger located on the bottom of the presenter.

Laser Pointer

Trigger

Bottom-sideof presenter

Operating Hints

For optimal performance and RF reception:

Place the receiver at least 15 cm away from all electrical devices, such as your monitor, speakers or external storage devices.

The presenter will enter a suspend mode at the same time

your computer does. To activate, roll the trackball.

• If your computer has a metal case that contains aluminum or magnesium, use the presenter to the side. The display panel may interfere with the radio frequency signal if you use the presenter directly in front of the computer.

10