Targus AMP13US AMP13US User Manual

Size:
206.68 Kb
Download

410-1681-001F /AMP13US

1 YEAR LIMITED WARRANTY: We pride ourselves on the quality of our products. For complete warranty details and a list of our worldwide offices, please visit www.targus.com. Features and specifications are subject to change without notice. Microsoft, Windows, Windows Vista and PowerPoint are registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Mac and Keynote are registered trademarks of Apple Inc., registered in the U.S. and other countries. All trademarks and registered trademarks are the property of their respective owners. ©2012 Targus Group International, Inc.

N2953

User Guide

 

Targus Laser Presentation Remote

Introduction

Thank you for your purchase of the Targus Laser Presentation Remote. This combination remote with laser pointer, controls both Microsoft PowerPoint® and Apple Keynote®. This cordless remote also offers true plug and play capability with no need for software drivers, while longrange 2.4 GHz technology allows for effective presentations up to 50 feet (15 m).

Contents

Targus Laser Presentation Remote

Mini USB Receiver

1 x AAA Battery

User Guide

System Requirements

Hardware

• USB port

Operating System

Microsoft Windows® 2000

Microsoft Windows® XP

Microsoft Windows Vista®

Microsoft Windows® 7

Microsoft Windows® 8

Mac OS® X 10.4 to 10.8

2

Targus Laser Presentation Remote

Setting Up Your Remote

Installing the Battery

Press the battery cover release button to open the battery cover and carefully lift the cover as shown.

Battery cover

Battery

cover

release button

 

Insert the supplied battery, making sure the positive (+) and negative (-)end of the battery match the polarity indicators inside the battery compartment.

3

Targus Laser Presentation Remote

Remove the mini USB receiver stored inside the center compartment.

Slide the battery cover back into position until it “clicks” firmly into place.

Targus Laser Presentation Remote

Using Your Remote

Before using the remote, please select your computer type and preferred presentation software. Locate the switch inside the battery compartment as shown.

PC PowerPoint®

Mac KeyNote®

Mac PowerPoint®

NOTE: SELECT “PC POWERPOINT” IF YOU USE A COMPUTER MADE BY: HP/COMPAQ, DELL, TOSHIBA, GATEWAY, PANASONIC, FUJITSU, SONY, IBM/LENOVO, ACER, ASUS, ETC.

4

5

Targus Laser Presentation Remote

This remote is a plug and play device. It will automatically operate when the

USB receiver is connected to the computer. Plug the mini USB receiver into any available USB port on your computer.

Turn on the remote by pressing and holding the On/Off power button for 3 seconds.

Targus Laser Presentation Remote

Keys and Functions

3

2

4

5

1

8

6

7

9

6

7

 

 

Targus Laser Presentation Remote

 

 

 

 

 

 

 

 

 

 

 

 

 

Press and hold for 3 seconds to turn on the remote.LED

 

 

1

Power button

ring will turn green.

 

 

 

 

 

Press and hold for 3 seconds to turn off the remote.LED

 

 

 

 

 

 

 

 

ring will shut off.

 

 

 

 

 

 

 

2

Blank screen button

The screen will become blank/dark.

 

 

 

 

 

 

 

 

 

Start - Press once to begin.

 

 

3

Slide show

 

 

 

Stop - Press and hold for 2 seconds to stop the slide

 

 

 

 

show.

 

 

 

 

 

 

 

4

Page Forward/Next slide

Press once to go to next slide.

 

 

 

 

 

 

 

5

Page

Press once to go back one slide.

 

 

Backward/Previous slide

 

 

 

 

 

 

 

 

 

 

 

6

Laser pointer

Laser light is emitted from the opening.

 

 

 

 

 

 

 

7

LED light ring

Power and KeyLockTM indicator.

 

 

 

 

Press once to enable KeyLock function.

 

 

 

 

- Disables all keys except the laser, page forward/next

 

 

8

KeyLock button

slide and page backward/previous slide buttons.

 

 

- LED ring will become RED.

 

 

 

 

 

 

 

 

 

Press once to disable the KeyLock function.

 

 

 

 

- LED ring will return to GREEN.

 

 

 

 

 

 

 

9

Laser pointer button

Press and hold to activate the laser pointer.

 

 

 

 

 

 

Targus Laser Presentation Remote

Safety Measures

To avoid possible eye damage, never point the remote’s laser at people, especially their faces, or look directly into the remote’s laser beam.

Avoid pointing the remote’s laser beam at a mirror or other highly-reflectivesurface.

Keep the remote away from young children.

Never view the remote’s laser beam using telescopic devices, such as a microscope or binoculars.

Any attempt to disassemble, adjust or repair the remote may result in exposure to laser light or other safety hazards.

Troubleshooting

What do I do if the response time of the remote is slow or it intermittently stops working?

Make sure that the remote is within 50 feet (15 m) of the mini USB receiver and computer.

Increase the distance between the remote’s receiver and the base units of other wireless devices.

Turn off any wireless devices and their base units that are near the remote’s receiver.

Replace the battery.

8

9

Targus Laser Presentation Remote

Technical Support

For technical questions, please visit:

US

Internet: www.targus.com/support.asp

Australia

Internet: www.targus.com/au

 

Email: infoaust@targus.com

 

Telephone: 1800-641-645

New Zealand

Telephone: 0800-633-222

Product Registration

Targus recommends that you register your Targus accessory shortly after purchasing it. Go to:

http://www.targus.com/registration.asp

You will need to provide your full name, email address, country of residence and product information.

Regulatory Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Targus Laser Presentation Remote

OneYear Warranty

1.Targus warrants to the original purchaser that its products are free from defects in materials and workmanship for one year. This warranty is limited to defects, materials and workmanship.

2.The benefits to the consumer given by the warranty are in addition to other rights and remedies of the consumer under law in relation to the goods to which the warranty relates. 3. The warranty is given by (i) Targus Australia, (ii) Targus Australia’s business address is: 117-119Bowden Street, Meadowbank, NSW 2114 Australia, (iii) Targus Australia’s telephone number is

1800 641 645, Email: infoaust@targus.com (iv) To make a warranty claim for goods purchased in New Zealand, the telephone number is: 0800 633 222, or the goods may be returned to the supplier in New Zealand. 4. What the purchaser must do to entitle the purchaser to claim warranty:- (i) The purchaser must call the telephone number for Australia or New Zealand set out above, (ii) The purchaser must provide the purchaser’s name, daytime contact number, business hours delivery address, the Targus model number on the product, date and place of purchase with receipt for purchase if required, and describe the fault condition. 5. What Targus must do:- (i) Targus will provide the purchaser with store return information or a return authorisation so that the purchaser may return the product for warranty inspection, (ii) If after inspection Targus finds the product is defective in materials or workmanship, Targus shall replace (or repair) the defective product at the discretion of Targus and ship the product from

Targus warehouse at its expense within three business days (Monday to Friday excluding public holidays) of receiving the returned goods. If the product is no longer available Targus reserves the right to replace with the nearest corresponding product of no lesser quality, (iii) Targus will bear the cost of return delivery to the purchaser regardless of the inspection test result. The purchaser must bear the cost of the delivery to Targus. There is no charge for inspection. 6.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.

You are entitled to a replacement or refund for a major failure and for compensation for any other reasonable foreseeable loss or damage.You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. 7. Please note: (i) Features and specifications of all Targus products are subject to change without notification, (ii) In some instances: Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods, (iii) If goods accepted for repair retain user-generateddata: During the process of repair some or all of your stored data may be lost. Please ensure that you have saved this data elsewhere prior to repair.

10

11

Targus Laser Presentation Remote

FCC Statement

Tested to Comply

This equipment has been tested and found to comply with the limits of a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna;

Increase the separation between the equipment and receiver;

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;

Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not authorized by the party responsible for compliance could void the user’s authority to operate this product.

Declaration of Conformity

Hereby, Targus, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Microsoft, Windows, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All trademarks and registered trademarks are the property of their respective owners. All rights reserved. Features and specifications are subject to change without notice. © 2012. Targus Group International, Inc. and Targus, Inc., Anaheim, CA 92806 USA

Targus Laser Presentation Remote

AVOID EXPOSURE — HAZARDOUS ELECTROMAGNETIC RADIATION EMITTED FROM THIS APERTURE.

LASER RADIATION. DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. CLASS 2 LASER PRODUCT.

NEVER POINT A LASER BEAM INTO A PERSON’S EYES OR VIEW A LASER BEAM DIRECTLY, AS PROLONGED EXPOSURE CAN BE HAZARDOUS TO THE EYES. MOMENTARY EXPOSURE FROM A LASER POINTER, SUCH AS AN INADVERTENT SWEEP OF THE LIGHT ACROSS A PERSON’S EYES, MAY CAUSE TEMPORARY FLASH BLINDNESS SIMILAR TO THE EFFECT OF A CAMERA FLASH BULB. ALTHOUGH THIS CONDITION IS TEMPORARY, IT CAN BECOME MORE DANGEROUS IF THE EXPOSED PERSON IS ENGAGED IN A VISION-CRITICALACTIVITY SUCH AS DRIVING.

CAUTION: ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

THIS DEVICE AND ITS ANTENNA(S) MUST NOT BE CO-LOCATEDOR OPERATING IN CONJUNCTION WITH ANY OTHER ANTENNA OR TRANSMITTER. YOUR DEVICE CONTAINS A LOW POWER TRANSMITTER. WHEN DEVICE IS TRANSMITTED IT SENDS OUT RADIO FREQUENCY (RF) SIGNAL.NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

12

13