Symphonic WF20D4 User Manual

Size:
856.5 Kb
Download

OWNER’S

MANUAL

COLOR TV/DVD WF20D4 (20 inch)

SUPPLIED ACCESSORIES

INSTRUCCIONES

EN ESPAÑOL INCLUIDAS.

Remote Control Unit

Batteries

Owner’s Manual

 

 

Owner's Manual

NE228UD

2 AA Batteries

1EMN20057

As an ENERGYSTAR®

Partner, our company has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. ENERGY STAR® is a U.S. registered mark.

If you need additional assistance for set-upor operating after reading owner’s manual, please callTOLL FREE : 1-800-242-7158.

Or visit our WEB SITE at http://www.funai-corp.com

Please read before using this equipment

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The caution marking is located on the rear of the cabinet.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

IMPORTANT SAFEGUARDS

1.Read instructions-Allthe safety and operating instructions

 

Accessoires- Ne placez pas cette appareil sur une table

should be read before the appliance is operated.

 

roulante, un support, un trépied, une console ou une table

2.Retain Instructions-Thesafety and operating instructions

 

instable. Cette appareil risquerait de tomber, pouvant grave-

 

ment blesser quelqu'un et l'appareil même pourrait être

should be retained for future reference.

 

 

sérieusement endommagé. N'utilisez qu'une table roulante,

3.Heed Warnings-Allwarnings on the appliance and in the

 

 

un support, un trépied, une console ou une table recom-

operating instructions should be adhered to.

 

 

mandé par le fabriquant, ou vendu avec l’appareil. Pour

4.Follow Instructions-Alloperating and use instructions

 

 

n'importe quelle installation de l'appareil, on devra suivre

should be followed.

 

 

les instructions du fabriquant et l'on devra utiliser les acces-

5.Cleaning-Unplugthe unit from the wall outlet before clean-

 

soires d'installation recommandés par le fabriquant.

ing. Do not use liquid cleaners or aerosol cleaners. Use a

 

L'ensemble combiné de l'appareil avec une table roulante

damp cloth for cleaning.

 

 

devra être déplacé avec précaution. Des arrêts brusques,

EXCEPTION: A product that is meant for uninterrupted

 

une force excessive et des surfaces inégales peuvent provo-

service and, that for some specific reason, such as the possi-

 

quer le renversement de l'ensemble combiné de

bility of the loss of an authorization code for a CATV con-

 

l'appareil/table roulante.

verter, is not intended to be unplugged by the user for clean-

9. Ventilation-Slotsand openings in the cabinet and the back

ing or any other purpose, may exclude the reference to

 

or bottom are provided for ventilation and to ensure reliable

unplugging the appliance in the cleaning description other-

 

operation of the unit and to protect it from overheating, and

wise required in item 5.

 

 

these openings must not be blocked or covered. The open-

6.Attachments-Donot use attachments not recommended by

 

ings should never be blocked by placing the unit on a bed,

the unit manufacturer as they may cause hazards.

 

sofa, rug, or other similar surface. This unit should never be

7.Water and Moisture-Donot use this unit nearwater-for

 

placed near or over a radiator or heat register. This unit

 

should not be placed in a built-ininstallation such as a

example, near a bath tub, wash bowl, kitchen sink, or laun-

 

 

bookcase or rack unless proper ventilation is provided or

dry tub, in a wet basement, or near a swimming pool, and

 

 

the manufacturer’s instructions have been adhered to.

the like.

 

 

 

10.Power Sources-Thisunit should be operated only from the

8.Accessories-Donot place this unit on an unstable cart,

 

type of power source indicated on the marking label. If you

stand, tripod, bracket, or table. The unit may fall, causing

 

 

are not sure of the type of power supply to your home, con-

serious injury to someone, and serious damage to the appli-

 

 

sult your appliance dealer or local power company. For

ance. Use only with a cart, stand, tripod, bracket, or table

 

 

unit’s intended to operate from battery power, or other

recommended by the manufacturer, or sold with the unit.

 

 

sources, refer to the operating instructions.

Any mounting of the appliance

PORTABLE CART WARNING

 

11.Grounding or Polarization-This unit is equipped with a

should follow the manufacturer’s

AVERTISSEMENT POUR UNE

instructions and should use a mount-

TABLE ROULANTE PORTATIVE

 

polarized alternating-currentline plug(a plug having one

 

 

ing accessory recommended by the

 

 

blade wider than the other). This plug will fit into the

manufacturer. An appliance and cart

 

 

power outlet only one way. This is a safety feature. If you

combination should be moved with

 

 

are unable to insert the plug fully into the outlet, try revers-

care.

 

 

ing the plug. If the plug should still fail to fit, contact your

Quick stops, excessive force, and

 

 

electrician to replace your obsolete outlet. Do not defeat the

uneven surfaces may cause the appli-

S3126A

 

safety purpose of the polarized plug.

ance and cart combination to over-

 

 

 

 

 

turn.

 

 

 

 

– 2 –

EN

0C28

FIGURE A

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECT RICAL CODE

 

 

 

 

 

 

ANTENNA

 

 

 

 

 

 

L EAD I N

 

 

 

 

 

 

W I R E

 

GROUND

 

C L A M P

 

 

 

 

 

 

ANTENNA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DI SCHARGE UN I T

 

 

 

 

 

 

(NEC SECTION 8 10 -20)

EL ECTRI C

 

 

 

 

 

 

SE RV I CE

 

 

 

 

 

 

EQU I PMEN T

 

 

 

 

 

 

 

 

 

 

 

 

GROUNDI NG CONDUCTORS

 

 

 

 

 

 

(NEC SECTION 8 10 -21)

 

 

 

 

 

G RO UND CL AMPS

NEC - NATI O NAL EL ECTRI CAL CODE

 

 

POWER SERVI C E GROUNDI NG

 

 

 

EL EC TR ODE SYSTEM

S2 8 9 8 A

 

 

(NEC ART 2 50 , PART H)

12.Power-Cord Protection-Power-supplycords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

13.Outdoor Antenna grounding-If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A)

14.Lightning-Foradded protection for this unit receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning andpower-linesurges.

15.Power Lines-Anoutside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16.Overloading-Donot overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

17.Object and Liquid Entry-Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the unit.

18.Servicing-Donot attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19.Damage Requiring Service-Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power-supplycord or plug is damaged or frayed.

b.If liquid has been spilled, or objects have fallen into the unit.

c.If the unit has been exposed to rain or water.

d.If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the unit to its normal operation.

e.If the unit has been dropped or damaged in any way.

f.When the unit exhibits a distinct change in performancethis indicates a need for service.

20.Replacement Parts-Whenreplacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards.

21.Safety Check-Uponcompletion of any service or repairs to this unit, ask the service technician to perform routine safety checks to determine that the unit is in proper operating condition.

22.Heat-Thisunit product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

– 3 –

EN

0C28

PRECAUTIONS

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

FCC WARNINGThis equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

RADIO-TVINTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1)Reorient or relocate the receiving antenna.

2)Increase the separation between the equipment and receiver.

3)Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4)Consult the dealer or an experienced radio/TV technician for help.

LASER SAFETY

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM.

LOCATION: INSIDE, NEAR THE DECK MECHANISM.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003du Canada.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.

The serial number of this product may be found on the back of the unit. No other unit has the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.

Date of Purchase

Dealer Purchase from

Dealer Address

Dealer Phone No.

Model No.

Serial No.

– 4 –

EN

0C28

LOCATION

 

SYMBOLS USED IN THIS MANUAL

 

 

 

For safe operation and satisfactory performance of your unit, keep the following in mind when selecting a place for its installation:

Shield it from direct sunlight and keep it away from sources of intense heat.

Avoid dusty or humid places.

Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top or bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes.

Install unit in a horizontal position.

Avoid locations subject to strong vibration.

Do not place the unit near strong magnetic fields.

Avoid moving the unit to locations where temperature differences are extreme.

AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE

Do not handle the power cord with wet hands.

Do not pull on the power cord when disconnecting it from an AC wall outlet. Grasp it by the plug.

If by accident, water is spilled on your unit, unplug the power cord immediately and take the unit to our Authorized Service Center for servicing.

Do not put your fingers or objects into the unit disc loading tray.

Do not place anything directly on top of the unit.

WARNING

Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place or after heating a cold room or under conditions of high humidity. If a DVD is played in a unit which has moisture, it may damage the DVD and the unit. Therefore when the condensation occurs inside the unit, turn POWER on and allow at least 2 hours for the unit to dry out.

The following symbols below appear in some headings and notes in this manual, with the following meanings

TV

:Description refers to TV operation (in the TV mode).

DVD-V

:Description refers to playback of DVD video discs (in the DVD mode).

CD

:Description refers to playback of audio CDs (in the DVD mode).

MP3

:Description refers to playback of MP3 discs (in the DVD mode).

QUICK

:Description refers to the items to be set by the QUICK mode (in the DVD mode).

– 5 –

EN

0C28

TABLE OF CONTENTS

C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2

C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4

LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE . . . . . . . . . . . . . . . . . . . . . .5

WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 SYMBOLS USED IN THIS MANUAL . . . . . . .5

C TABLE OF CONTENTS . . . . . . . . . . . . . . . . . .6

C FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

C OPERATING CONTROLS AND FUNCTIONS . . .8

INSTALLING THE BATTERIES . . . . . . . . . . .9

C PREPARATION FOR USE . . . . . . . . . . . . . . .10

ANTENNA/CABLE CONNECTIONS . . . . . . .10 CONNECTING TO EXTERNAL INPUT JACKS .11

CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL INPUT JACKS, MD DECK OR DAT DECK (for DVD only) . .11

CONNECTING TO A DOLBY DIGITAL DECODER (for DVD) . . . . . . . . . . . . . . . . . . .12

TV SECTION

 

C SET UP FOR USE . . . . . . . . . . . . . . . . . . . . .

13

SELECTING THE LANGUAGE . . . . . . . . . . .13 CHANNEL SET UP . . . . . . . . . . . . . . . . . . . . .13 DELETING (OR ADDING) CHANNEL(S) . . .14

C TV OPERATION . . . . . . . . . . . . . . . . . . . . . . .15

WATCHING A TV PROGRAM . . . . . . . . . . . .15 DEGAUSSING . . . . . . . . . . . . . . . . . . . . . . . .15 PICTURE CONTROL . . . . . . . . . . . . . . . . . . .15 SLEEP TIMER . . . . . . . . . . . . . . . . . . . . . . . . .16 CLOSED CAPTION SYSTEM . . . . . . . . . . . .16 V-CHIPSET UP . . . . . . . . . . . . . . . . . . . . . . . .17

DVD SECTION

C ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . .19

PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . .19 DISC TYPES . . . . . . . . . . . . . . . . . . . . . . . . . .19

C PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . .20

BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . .20 GENERAL FEATURES . . . . . . . . . . . . . . . . . .20 DISC MENU . . . . . . . . . . . . . . . . . . . . . . . . . .20 TITLE MENU . . . . . . . . . . . . . . . . . . . . . . . . .20 RESUME . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 PAUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 STEP BY STEP PLAYBACK . . . . . . . . . . . . .21 FAST FORWARD/REVERSE SEARCH . . . . .21 SLOW FORWARD / SLOW REVERSE . . . . .21

C SEARCH FUNCTION . . . . . . . . . . . . . . . . . .22

TRACK SEARCH . . . . . . . . . . . . . . . . . . . . . .22 TITLE / CHAPTER SEARCH . . . . . . . . . . . . .22 TIME SEARCH . . . . . . . . . . . . . . . . . . . . . . . .22 MARKER SETUP SCREEN . . . . . . . . . . . . . .22

C SPECIAL PLAYBACK FUNCTION . . . . . . . .23

REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . .23 RANDOM PLAYBACK . . . . . . . . . . . . . . . . .23

C PLAYING A MP3 DISC . . . . . . . . . . . . . . . . . .24

MP3 PLAYBACK . . . . . . . . . . . . . . . . . . . . . .24 REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . .24 RANDOM PLAYBACK . . . . . . . . . . . . . . . . .24

C CHANGING THE SETTINGS . . . . . . . . . . . .25

SUBTITLE LANGUAGE . . . . . . . . . . . . . . . .25 AUDIO LANGUAGE . . . . . . . . . . . . . . . . . . .25 STEREO SOUND MODE . . . . . . . . . . . . . . . .25 CAMERA ANGLE . . . . . . . . . . . . . . . . . . . . . .25 BLACK LEVEL SETTING . . . . . . . . . . . . . . .25 VIRTUAL SURROUND . . . . . . . . . . . . . . . . .25

C THEON-SCREENINFORMATION . . . . . . .26

C CHANGING THE DVD SETUP ITEMS . . . .27

LANGUAGE SETTING . . . . . . . . . . . . . . . . .27 DISPLAY SETTING . . . . . . . . . . . . . . . . . . . .28 AUDIO SETTINGS . . . . . . . . . . . . . . . . . . . . .28 PARENTAL CONTROL . . . . . . . . . . . . . . . . .29 INITIALIZE . . . . . . . . . . . . . . . . . . . . . . . . . . .29

C TROUBLESHOOTING GUIDE . . . . . . . . . . .30

C MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . .32

DISC HANDLING . . . . . . . . . . . . . . . . . . . . . .32

C SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . .33

C ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

C WARRANTY . . . . . . . . . . . . . . . . . . .Back Cover

– 6 –

EN

0C28

FEATURES

TV Mode

181 channel capability PLL frequency synthesizer tuner with direct station call

(A converter may be necessary to view scrambled cable channels.)

Infrared remote control

Trilingual on screen menu display selectable in English, Spanish or French

¡Sleep Timer

The Sleep Timer function enables you to shut off the power without pressing POWER after a desired time period.

¡Closed Caption Decoder

You may view specially labeled (cc) TV programs, movies, news, etc. with either a dialogue caption or text display added to the program.

¡Auto Shut Off Function

If there is no air signal input from the antenna terminal and no operation for 15 minutes, the unit will turn itself off automatically.

¡V-CHIP

Enables parents to prevent their children from watching inappropriate material on TV.

DVD Mode

¡Dolby Digital sound

This unit can handle Dolby Digital surround sound having 5.1 channels when connected to a Dolby Digital decoder.

¡Still/fast/slow/step playback

Various playback modes are available including still pictures, fast forward/reverse, slow motion and step frames.

¡Random playback for audio CD and MP3

This unit can shuffle the order of tracks to play them in random order.

¡Program playback for audio CD and MP3

You can program the order of tracks to play them in any desired order.

¡DVD menus in a desired language

You can display DVD menus in a desired language, if available on a DVD.

¡Screen saver/Autopower-offfunctions

The screen saver program starts when there is no input from the unit for 5 minutes in the stop mode. When the screen saver program is activated for 15 minutes, the power is automatically turned off.

¡Subtitles in a desired language

You can select a desired language for the display subtitles, if that language is available on a disc.

¡Selecting a camera angle

You can select the desired camera angle, if a disc contains sequences recorded from different angles.

¡Choices for audio language and sound mode

You can select the desired audio language and sound mode, if different languages and modes are available on a disc.

¡Parental lock

You can set the control level to limit playback of discs which may not be suitable for children.

¡Automatic detection of discs

This unit automatically detects if the loaded disc is DVD, audio CD or MP3 on disc.

¡On-screendisplay

Information about the current operation can be displayed on a TV screen, allowing you to confirm the currently active functions (such as program playback), on the TV screen using the remote control.

¡Search

Chapter search / Title search / Track search / Time search

¡Repeat

Chapter / Title / Track / Group / All / A-B

¡Marker

The part designated by user can be called back.

¡Resume Play

User can resume to playback from the part at which the play was stopped.

¡Virtual Surround

¡Bit rate indication

¡DRC (Dynamic range control)

You can control the range of sound volume.

– 7 –

EN

0C28

OPERATING CONTROLS AND FUNCTIONS

TV/DVD FRONT PANEL [Fig. 1]

 

 

 

 

 

 

 

 

 

 

OPEN/

 

 

 

 

VIDEO

L–AUDIO–R

POWER

VOLUME

CHANNEL

 

STOP SKIP PLAY SKIP PAUSE CLOSE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

–SEARCH–

 

 

 

 

 

 

 

 

 

 

HEADPHONE

 

 

 

1

2

3

4

5

6

7

8 9 10111213 14

REMOTE CONTROL

[Fig. 2]

 

 

 

7. Remote Sensor Window

 

 

 

 

 

 

 

 

 

8. STOP Button [page 20]

 

 

 

 

 

 

 

 

 

 

Stops operation of the disc.

 

 

 

 

 

 

 

 

 

9. SKIPH Button [page 21]

 

 

 

 

 

 

 

 

 

 

Plays back from the beginning of the current

 

POWER PICTURE SELECT

CLOSE

 

 

 

 

chapter or track.

 

 

 

 

OPEN/

 

 

 

 

 

4

 

 

 

 

 

 

13

 

 

SEARCH (REV) E Button (Front Panel)

36

1

2

3

 

 

 

34

 

 

[page 21]

 

 

 

 

 

 

 

During playback or in the pause mode, press and

 

 

 

 

CH.

 

 

6

 

 

16

4

5

6

 

 

 

 

 

hold button down for a few seconds to change

 

 

 

 

 

 

reverse playback speed.

7

8

9

 

5

10. PLAY Button [page 20]

SLEEP

 

+100

VOL.

 

 

 

Starts playback of the disc contents.

17

0

+10

 

 

 

SKIP

 

V.SURR

MUTE

35

 

Press to change to DVD mode when TV mode.

9

 

 

 

11.

SKIP G Button [page 21]

11

 

 

 

19

 

 

 

 

Plays back from the beginning of the next chapter

10

 

PLAY

 

18

 

REV

 

 

FWD

 

 

or track.

 

 

STOP

 

8

 

PAUSE

SLOW

DISC

12

MENU

33

 

 

 

23

DISPLAY

 

 

32

 

ENTER

 

20

SETUP

TITLE

RETURN

31

 

 

 

30

21

 

 

 

CLEAR

SEARCH MODE REPEAT

A-B

29

22

 

AUDIO SUBTITLE

ANGLE

15

MODE

28

 

 

 

24

 

 

 

27

25

 

 

 

26

1.Disc loading tray

2.VIDEO input Jack [page 11]

Connect to the video output jack of a video camera or VCR.

3.AUDIO L/R input Jacks [page 11]

Connect to the audio output jacks of a video camera or VCR.

4.POWER Button [page 13]

Press to turn the power on and off.

5.VOLUME K/L (VOL.m/n) Buttons

Press to control the volume level for the DVD and TV.

6.CHANNEL K/L (CH.K/L) Buttons [page 14]

Press to select memorized channel.

Press to change to TV mode when DVD mode.

SEARCH (FWD) D Button (Front Panel)

[page 21]

During playback or in the pause mode, press and hold button down for a few seconds to change forward playback speed.

12.PAUSE Button [page 21]

Pauses the current disc operation.

13.OPEN/CLOSE Button [page 20]

Press to insert discs into or remove them from the tray.

14.HEADPHONE Jack

To connect headphone (not supplied) for personal listening.

15.MODE Button [pages 23-25]

Activates program playback or random playback mode when playing CDs or MP3.

16.Number Buttons TV Mode: [page 15]

Press two digits to directly access the desired channel. Remember to press 0 before a single digit channel.

+100 Button

Press to select cable channels which are higher than 99.

DVD Mode: [page 22]

Press to enter the desired number.

+10 Button

Press to enter the desired numbers which are greater than 9.

– 8 –

EN

0C28

TV/DVD REAR VIEW

[Fig. 3]

ANT.

COAXIAL

 

37

38

39

 

 

 

17. SLEEP Button [page 16]

 

Press to accept a setting.

Press SLEEP to display the sleep timer and start the

32. Arrow Buttons

function. The shut off time can be determined by the

 

TV Mode: [page 13]

number of times you press this button. (0, 30, 60, 90

 

Press to select a setting mode from the menu on the

or 120 minutes)

 

TV screen.

 

 

 

 

18. REVh Button [page 21]

 

Press to select or adjust from a particular menu.

Press to view the DVD picture in fast reverse

 

DVD Mode: [page 20]

motion. Press PAUSE, then press this button to begin

 

Use when making settings while watching the

slow motion playback. Press this button repeatedly

 

display on a TV screen.

to change the reverse speed of slow motion.

33. DISC MENU Button [page 20]

FWD g Button [page 21]

 

Displays the menus in the DVD.

Press to fast forward the Disc. Press PAUSE, then

34. SELECT Button [page 20]

press this button to begin slow motion playback.

 

Press to change to TV mode, external input mode or

Press this button repeatedly to change the forward

 

 

DVD mode.

 

 

 

 

speed of slow motion.

 

 

 

 

 

19. V.SURR (VIRTUAL SURROUND) Button

 

 

NOTE: When you select the DVD mode by this

 

[page 25]

 

 

button, press PLAY or OPEN/CLOSE first.

 

Press to set virtual surround on/off.

 

 

Otherwise, the DVD features are not operated.

 

20. SETUP Button [pages13,27-29]

 

 

 

 

 

 

 

 

35. MUTE Button

 

 

 

 

Press to enter or exit the TV menu or DVD setup

 

 

 

 

mode.

 

Press MUTE to turn off the sound portion of the TV

21. TITLE Button [page 20]

 

program. (Volume level display turns LIGHT RED

 

from LIGHT BLUE.) Press MUTE again or press

Displays the title menu.

 

 

VOL. m ornto restore sound.

22. CLEAR Button [pages22-24]

 

36. PICTURE Button [page 15]

Resets a setting.

 

Press to enter picture adjustment mode.

23. DISPLAY Button

 

37. Power cord

 

 

 

 

TV Mode:

 

 

 

 

 

Connect to a standard AC outlet (120V/60Hz).

Press to display the channel number on the screen.

 

 

NOTE: Remove the power cord from the hook to

If you press it again, the channel number will disap-

 

 

 

 

avoid breaking a wire before you connect to

pear.

 

 

 

 

 

 

a standard AC outlet.

DVD Mode: [page 26]

 

 

 

38. COAXIAL digital audio out Jack (DVD Audio

Displays the current status on the TV screen for

 

Only) [pages 11, 12]

checking purposes.

 

Connect to the digital input of an external

24. SEARCH MODE Button [page 22]

 

 

amplifier or decoder.

Press to locate a desired point.

39. ANT. in Jack

 

 

 

 

25. AUDIO Button [page 25]

 

 

 

 

 

Connect to an antenna, cable system or satellite sys-

Press to select a desired audio language or sound

 

tem.

 

 

 

 

 

mode.

 

 

 

 

 

 

 

 

26. SUBTITLE Button [page 25]

 

 

 

 

 

 

 

 

Press to select a desired subtitle language.

 

 

 

 

 

 

 

 

 

INSTALLING THE BATTERIES

27. REPEAT Button [page 23]

 

Repeats playback of the current disc, title, chapter,

 

1)Open the battery compartment cover by pressing the

group or track.

 

28. ANGLE Button [page 25]

 

cover on the remote unit in the direction of the arrow.

Press to change the camera angle to see the sequence

 

2)Insert 2 “AA” penlight batteries into the battery

being played back from a different angle (if avail-

 

compartment in the direction indicated by the

able).

 

 

polarity (+/-)markings.

29. REPEATA-BButton [page 23]

 

 

3)Replace the cover.

 

 

 

Repeats playback of a selected section.

 

 

 

 

 

 

 

30. RETURN Button [page 25]

 

 

 

 

 

 

 

 

Returns to the previous operation in the DVD setup

 

NOTES:

 

 

 

 

 

mode.

 

¡Do not mix alkaline and manganese batteries.

31. ENTER Button [pages 13, 20]

 

 

¡Do not mix old and new batteries.

– 9 –

 

 

 

EN

0C28

PREPARATION FOR USE

ANTENNA/CABLE CONNECTIONS

Satellite Box or

 

 

From Cable System or

Cable Box

OUT

IN

(Not supplied)

 

Satellite Dish

 

 

From

Cable System

VHF/UHF

or Combiner

(Not supplied)

ANT.

75-ohmCoaxialor Cable (Not supplied)

or

Note to CATV system installer:

VHF/UHF Antenna (Not supplied)

VHF Antenna (Not supplied)

UHF Antenna (Not supplied)

Flat twin-leadcable

[Fig. 4]

This reminder is provided to call the CATV system installer’s attention to Article 820-40of the NEC that provides guidelines for proper grounding and in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

NOTE:

Before plugging the antenna into the ANT. IN jack of the unit, check that the pin is not bent. If it is bent, straighten the pin as illustrated, then plug the pin into the ANT. IN jack of the unit.

Bent pin

Cable Plug

(Needs to be straightened)(Straight pin)

VHF/UHF COMBINED ANTENNA

A VHF UHF 75 ohm combination antenna can be connected to ANT terminal.

VHF/UHF SEPARATE ANTENNAS

In some areas it will be necessary to use an outdoor antenna.

CABLE WITHOUT CONVERTER/ DESCRAMBLER BOX

Use this connection if your cable system connects directly to your unit without a converter box. Use the TV/ DVD Remote Control to select channels.

CABLE WITH CONVERTER/DESCRAMBLER BOX OR SATELLITE BOX

If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown here.

Channel selection must be made with the converter box or satellite box. This means that channels cannot be changed using the TV/ DVD Remote Control.

TO VIEW A SCRAMBLED/UNSCRAMBLED CHANNEL

1.Set the TV/DVD channel selector to the output channel of the Cable Converter Box or Satellite Box. (Ex. CH3)

2.Select the channel to view on your Cable Converter Box or Satellite Box.

– 10 –

EN

0C28