Symphonic ST432F User Manual

Size:
279.6 Kb
Download
PORTABLE CART WARNING
S3126A

Owner’s Manual

ST432F

32 INCH COLOR TELEVISION

FEATURES

AV MEMORY (MANUAL/SPORT/NEWS/MOVIE/GAME)

MTS/SAP Tuner

181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels.

PLL Frequency Synthesized Tuning- Provides free and easy channel selection and lets you tune directly to any channel using the channel number buttons on the remote control.

Sleep Timer

Closed Caption Decoder

Auto Shut Off Function- If there is no signal input from the antenna terminal and no user operation for 15 minutes, the TV will turn itself off automatically.

Resume Function- If the power fails or is disconnected while the TV is on, the TV will turn on automatically when the power resumes.

V-CHIP- Enables parents to prevent their children from watching inappropriate material on TV.

Tinted, Bright Black Matrix Picture Tube

Full-FunctionRemote Control

On-ScreenFunction Display

S-VIDEO Input- Allows you to get better picture detail and clarity.

Front / Rear AV Input

Component VIDEO Input- Allows you to get superior picture detail and clarity.

Rear Audio Output- To connect TV sound to a home audio system.

PRECAUTIONS

Place your TV in a room with adequate ventilation.

Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.

Do not place your TV on soft surfaces, such as rugs or blankets.

Leave enough room for air to circulate around the bottom, top and back of the set.

The serial number of this product may be found on the back of the TV. No others have the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft.

Date of Purchase

 

Dealer Phone No.

 

Dealer Purchase from

 

Model No.

 

Dealer Address

 

Serial No.

 

IF YOU NEED ADDITIONAL ASSISTANCE WITH SET-UPOR OPERATING AFTER READING OWNER’S MANUAL, PLEASE CALLTOLL FREE 1-800-242-7158

OR VISIT OUR WEB SITE AT http://www.Symphonic.us

FUNAI CORPORATION

LIMITED WARRANTY

FUNAI CORP. will repair this product, free of charge in CANADA in the event of defect in materials or workmanship as follows:

DURATION :

PARTS : FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this warranty.

LABOR : FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase.

LIMITS AND EXCLUSIONS :

THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if service was attempted by AN UNAUTHORIZED SERVICE CENTER. This limited warranty does not apply to any product not purchased and used in CANADA.

This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product or damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN CANADA.

ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER.

THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-INTO AN AUTHORIZED SERVICE CENTER.

THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIRS COSTS WILL BE CHARGED.

ATTENTION :

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE.

To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please contact us at :

FUNAI CORPORATION

Customer Service

Tel: 1-800-242-7158

http://www.Symphonic.us

19900 Van Ness Avenue, Torrance, CA 90501

1EMN21492

Printed in Thailand

 

L3913WP * * * * *

IMPORTANT SAFEGUARDS

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The important note is located on the rear of the cabinet.

1.READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated.

2.RETAIN INSTRUCTIONS - The safety and operating instructions should be retained for future reference.

3.HEED WARNINGS - All warnings on the appliance and in the operating instructions should be adhered to.

4.FOLLOW INSTRUCTIONS - All operating and use instructions should be followed.

5.CLEANING - Unplug TV from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.

6.ATTACHMENTS - Do not use attachments not recommended by the TV manufacturer as they may cause hazards.

7.WATER AND MOISTURE - Do not use this TV near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

8. ACCESSORIES - Do not place this TV on an unstable cart, stand, tripod, bracket, or table. The TV may fall,

causing serious injury to someone, and serious damage to the appliance.

Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the TV.

Any mounting of the appliance should follow the manufacturer’s instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

THIS SYMBOL INDICATES THAT DAN-

GEROUS VOLTAGE CONSTITUTING A

RISK OF ELECTRIC SHOCK IS PRE-

SENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

9.VENTILATION - Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the TV and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the TV on a bed, sofa, rug, or other similar surface. This TV should never be placed near or over a radiator or heat register. This TV should not be placed in a built-ininstallation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

10.POWER SOURCES - This TV should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For TVs intended to operate from battery power, or other sources, refer to the operating instructions.

11.GROUNDING OR POLARIZATION - This TV is equipped with a polarized alternating-currentline plug(a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12.POWER-CORDPROTECTION -Power-supplycords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

13.OUTDOOR ANTENNA GROUNDING - If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and builtup static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-inwire to an antenna

discharge unit, size of grounding conductors, location

19. DAMAGE REQUIRING SERVICE - Unplug this TV

of antenna-dischargeunit, connection to grounding

from the wall outlet and refer servicing to qualified

electrodes, and requirements for the grounding elec-

service personnel under the following conditions:

trode. (Fig. A)

a. When the power supply cord or plug is damaged or

14. LIGHTNING - For added protection for this TV

frayed.

receiver during a lightning storm, or when it is left

b. If liquid has been spilled, or objects have fallen into

unattended and unused for long periods of time, unplug

the TV.

it from the wall outlet and disconnect the antenna or

c. If the TV has been exposed to rain or water.

cable system. This will prevent damage to the TV due

d. If the TV does not operate normally by following the

to lightning and power-linesurges.

operating instructions. Adjust only those controls that

15. POWER LINES - An outside antenna system should

are covered by the operating instructions, as improper

not be located in the vicinity of overhead power lines

adjustment of other controls may result in damage and

or other electric light of power circuits, or where it can

will often require extensive work by a qualified techni-

fall into such power lines or circuits. When installing

cian to restore the TV to its normal operation.

an outside antenna system, extreme care should be

e. If the TV has been dropped or damaged in any way.

taken to keep from touching such power lines or cir-

f. When the TV exhibits a distinct change in perfor-

cuits as contact with them might be fatal.

mance, this indicates a need for service.

16. OVERLOADING - Do not overload wall outlets and

20. REPLACEMENT PARTS - When replacement parts

extension cords as this can result in a risk of fire or

are required, be sure the service technician uses

electric shock.

replacement parts specified by the manufacturer that

17. OBJECT AND LIQUID ENTRY - Never push objects

have the same characteristics as the original part.

of any kind into this TV through openings as they may

Unauthorized substitutions may result in fire, electric

touch dangerous voltage points or short out parts that

shock, injury to persons or other hazards.

could result in a fire or electric shock. Never spill liq-

21. SAFETY CHECK - Upon completion of any service or

uid of any kind on the TV.

repairs to this TV, ask the service technician to perform

18. SERVICING - Do not attempt to service this TV your-

routine safety checks to determine that the TV is in

self as opening or removing covers may expose you to

proper operating condition.

dangerous voltage or other hazards. Refer all servicing

22. HEAT - This TV product should be situated away from

to qualified service personnel.

heat sources such as radiators, heat registers, stoves, or

 

other products (including amplifiers) that produce heat.

FIGURE A

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

 

ANTENNA

 

LEAD IN

 

WIRE

 

GROUND

 

CLAMP

 

ANTENNA

 

DISCHARGE UNIT

 

(NEC SECTION 810-20)

ELECTRIC

 

SERVICE

 

EQUIPMENT

 

 

GROUNDING CONDUCTORS

 

(NEC SECTION 810-21)

 

GROUND CLAMPS

NEC - NATIONAL ELECTRICAL CODE

POWER SERVICE GROUNDING

 

ELECTRODE SYSTEM

S 2 8 9 8 A

(NEC ART 250, PART H)

FCC WARNING - This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

Note to CATV system installer:

This reminder is provided to call the CATV system installer's attention to Article 820-40of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

As an ENERGY STAR® Partner, our company has determined that this product meets

the ENERGY STAR® guidelines for energy efficiency. ENERGY STAR® is a U.S. registered mark.

PREPARATION FOR USE

CONNECTIONS

Plug the incoming cable into the ANT. IN jack on the rear of the TV.

Cable

OR

Antenna

TV signal

 

 

Incoming cable from home antenna / cable company (No cable box)

Cable box or

Satellite box*

OR

OUT

IN

Incoming cable from cable company or satellite antenna

Rear of this TV

ANT. IN

*Note (DO NOT DISCONNECT FROM BOX)

*Cables are not included. Some cable TV systems use scrambled signals and require a special converter to receive these chan-

nels. Consult your local cable company.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

Note:

For your safety and to avoid damages to the unit, unplug the antenna cable from the ANT. IN jack before moving the unit.

[EXTERNAL CONNECTION]

AUDIO output

ex.

 

 

 

 

Rear of this TV

 

 

 

 

 

 

Audio Cable

 

AUDIO OUTPUT

VIDEO-1INPUT

COMPONENT VIDEO INPUT

 

 

VIDEO

 

AUDIO

Y

 

 

 

 

 

 

 

 

 

INPUT

 

 

 

L

L

L

 

Pb

 

 

 

 

 

 

ANT. IN

(IN)

(OUT)

R

S-VIDEO

R

 

 

R

 

Pr

Home Audio System

 

 

 

 

 

 

COMPONENT input

Component Video

 

Cable

Rear of this TV

 

ex.

 

AUDIO OUTPUT

VIDEO-1INPUT

COMPONENT VIDEO INPUT

 

(OUT)

(IN)

VIDEO

AUDIO

Y

 

 

INPUT

 

 

 

L

L

L

Pb

 

 

 

S-VIDEO

 

ANT. IN

 

 

 

 

 

 

 

R

R

R

Pr

DVD Player

(OUT)

(IN)

 

 

 

Audio Cable

Note:

This TV can only accept a 480i (interlaced) video signal.

VIDEO1 input (Rear)

 

 

 

 

 

 

S-VideoCable

 

 

 

Rear of this TV

ex.

 

(IN)

 

 

(OUT)

OR

 

 

 

 

 

AUDIO OUTPUT

VIDEO-1INPUT

COMPONENT VIDEO INPUT

(OUT)

 

(IN)

VIDEO

 

AUDIO

Y

Video Cable

 

 

INPUT

 

 

L

L

L

 

Pb

 

 

 

 

 

 

 

 

 

ANT. IN

 

 

 

S

 

 

 

Video Cassette Recorder

 

R

R

R

 

Pr

 

 

 

 

 

 

(OUT)

 

(IN)

 

 

 

 

Audio Cable

 

 

 

 

 

Notes:

The S-VIDEO jack is given priority over theVIDEO jack on the rear panel.

The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for connecting monaural audio equipment.

VIDEO2 input (Front)

Front of this TV

VIDEO L-AUDIO-R

ex.

 

 

 

 

Video Cable

 

(OUT)

(IN)

Video Camera Video Game

(OUT)

(IN)

 

 

 

 

Audio Cable

Note:

The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for connecting monaural audio equipment.

SELECTING AUDIO/VIDEO INPUT

When you use the AUDIO/VIDEO input jacks or COMPONENT VIDEO INPUT jacks, select “VIDEO1” or “VIDEO2” or “COMPONENT” mode by pressing [INPUT SELECT] on the remote control. The input mode changes by pressing the button as following:

INPUT TV channelVIDEO1 (Rear)VIDEO2 (Front)COMPONENT

SELECT

To use the VIDEO-1INPUT jacks on the rear of the TV, select “VIDEO1”.

To use the jacks on the front of the TV, select “VIDEO2”.

To use the COMPONENT VIDEO INPUT jacks on the rear of the TV, select “COMPONENT”.

INSTALLING THE BATTERIES

 

1

2

3

Install two AA batteries (supplied)

matching the polarity indicated inside

 

 

 

 

 

 

battery compartment of the remote con-

 

 

 

trol.

[BATTERY PRECAUTIONS]

Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device.

Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc)or old batteries with fresh ones.

If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.

OPERATIONS

REMOTE CONTROL AND FRONT PANEL FUNCTION

IR transmitter

 

 

 

 

 

To send infrared ray (IR) signal

 

 

 

 

 

 

POWER

 

GAME

SLEEP

GAME button

POWER button

 

SLEEP button

 

 

 

DISPLAY

To turn TV on/off

 

 

 

DISPLAY button

1

2

3

 

Channel number buttons

4

5

6

CHANNEL

To display CH No./Audio Status

7

8

9

RETURN

CHANNEL RETURN button

 

 

 

 

0

+100

INPUT

To return to previously viewed channel

 

 

 

 

SELECT

INPUT SELECT button

CH /buttons

 

 

 

 

To select channels

 

 

CH

 

To select TV or external input

 

VOL

CH

VOL

 

 

 

 

 

 

 

 

 

 

MUTE

MUTE button

 

MENU

 

 

 

MENU button

 

 

 

VOL /buttons

 

 

 

 

To view on-screenmenu

 

 

 

 

To adjust volume

 

 

 

 

 

Note:

You can test if the remote control sends out the infrared signal with an AM radio. (Refer to “TROUBLESHOOTING GUIDE”.)

MENU

VOLUME

CHANNEL

POWER

VIDEOL-AUDIO-R

Infrared Sensor Window

POWER button

To turn TV on/off

CHANNEL /buttons

To select channels

VOLUME X/Y buttons

To adjust volume

MENU button

To view on-screenmenu

AUDIO L/R input jacks

VIDEO input jack

Note:

If some digits appear in the corner of the screen when the unit is turned on for the first time, press [POWER] without unplugging the power cord.

SLEEP TIMER SETTING

1

SLEEP

SLEEP 0

2

SLEEP repeatedly

SLEEP 10

The time increases by 10 minutes up to 90.

Notes:

When you disconnect the unit from the AC outlet or when you have a power failure, the sleep time will be lost.

To cancel the sleep timer, press [SLEEP] repeatedly until “SLEEP 0” is displayed.

The Sleep Timer Setting display will disappear automatically after 10 seconds of the operation.

OPERATIONS (Continued)

CHANNEL SETTING

[AUTO PRESET CHANNELS]

[ADDING/DELETING CHANNELS]

Channel presetting is necessary at the start or

You can add channels that was not memorized

in case you moved the TV to a different area.

by AUTO PRESET CH due to the bad recep-

This feature automatically scans and memo-

tion status and also delete channels you no

rizes all available channels in your area and

longer receive or seldom watch.

lets you easily select with [CH /].

 

1 Select “CHANNEL SET”

MENU

PICTURE

CHANNEL SET [ENG] / ESP / FRAV-CHIPSET UP CAPTION [OFF]

TV SOUND [MAIN]

CH

CH

VOL

2 Select “AUTO PRESET CH”

CH

CH

ADD/DELETE

AUTO PRESET CH

 

VOL

The tuner starts scanning automatically.

3

 

 

 

 

 

 

 

 

After scanning

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(completed)

 

15

 

The lowest memo-

 

 

 

 

 

 

 

rized channel appears.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OR

 

 

(in failure)

 

 

 

 

 

 

 

 

 

 

 

 

Check antenna con-

NO TV SIGNALS

 

nection and try again.

 

 

 

 

 

 

 

 

 

 

 

 

Note:

The TV may recognize TV channels as CATV channels if reception condition is poor. If this happens, check the antenna connections and try scanning again when reception conditions are better.

1 Select “CHANNEL SET”

MENU

 

PICTURE

 

CHANNEL SET

 

[ENG] / ESP / FRA

 

V-CHIPSET UP

 

CAPTION [OFF]

CH

TV SOUND [MAIN]

CH

 

VOL

2 Select “ADD/DELETE”

 

ADD/DELETE

VOL

AUTO PRESET CH

3 Select the channel you wish

CH

CH

4 Add or delete the channel

15

VOL VOL

ADD/DELETE

Add: light blue

Delete: light red

Note:

The menu will disappear automatically after about 10 seconds.

MULTI-CHANNELTELEVISION SOUND (MTS)

1 Select “TV SOUND”

 

 

 

 

 

Menu

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Selection

MAIN

MONO

 

SAP*

 

 

 

 

 

MENU

 

 

 

 

 

 

 

 

 

 

Type of

 

 

 

 

 

 

 

 

 

 

 

PICTURE

 

 

 

 

 

broadcast

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CHANNEL SET

 

 

Regular

-None-

-None-

 

-None-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[ENG] / ESP / FRA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Stereo

 

 

 

 

 

 

 

 

 

 

 

 

 

 

V-CHIPSET UP

 

 

STEREO

MONO

 

STEREO

 

 

 

 

 

 

 

 

 

 

 

 

broadcast

 

 

 

 

 

 

 

 

 

 

 

CAPTION [OFF]

 

 

 

 

 

 

 

 

 

 

 

CH

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TV SOUND [MAIN]

 

 

SAP

MAIN

MAIN

 

SAP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CH

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*Second Audio Program (SAP) :

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

Select the desired sound

 

 

Your program can also be received in a sec-

 

 

VOL VOL

 

 

 

 

 

 

 

 

 

 

 

mode

 

 

 

 

 

ond language or sometimes a radio station.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[MAIN]

 

 

 

[MONO]

 

[SAP]

 

 

 

 

 

 

 

 

Note:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If you select [SAP] when second audio is

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

not available, the TV will receive normal

 

3 To exit the menu

 

 

 

 

 

audio.

 

 

 

 

 

 

 

 

MENU

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PICTURE ADJUSTMENT

1

Select “PICTURE”

 

 

 

 

 

4 Adjust the setting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MENU

 

 

 

 

 

PICTURE

 

 

VOL

 

... +

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CHANNEL SET

 

 

 

 

...

 

 

 

 

 

 

 

 

 

 

 

 

 

[ENG] / ESP / FRA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

V-CHIPSET UP

 

 

VOL

 

[-]BRIGHT [+]

 

 

 

 

 

 

 

 

 

 

 

 

 

VOL

 

 

 

 

 

CAPTION [OFF]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TV SOUND [MAIN]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BRIGHT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

Select “MANUAL”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Adjust until the darkest parts of the picture are

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CH

 

 

 

 

 

 

 

 

 

 

as bright as you prefer.

 

 

 

 

 

 

CH

 

 

 

 

 

 

 

 

 

 

[-] :decrease brightness

 

 

 

 

 

 

 

 

 

 

MANUAL

 

[+] : increase brightness

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CONTRAST

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Adjust to increase or decrease contrast.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VOL

 

 

 

 

 

 

 

 

 

 

[-] :decrease contrast

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[+] : increase contrast

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3 Select an item to adjust

 

 

 

 

 

 

 

 

 

 

 

 

COLOR

 

 

 

 

 

 

 

 

CH

 

 

 

 

 

 

 

 

 

Adjust to be brilliant or pale color.

 

 

 

 

CH

 

 

 

 

 

 

 

 

 

[-] :be pale color

[+] : be brilliant color

 

 

 

 

 

 

 

 

 

 

 

 

 

TINT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[BRIGHT]

 

 

 

 

[CONTRAST]

 

Adjust to obtain natural skin tones.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[-] :add red

[+] : add green

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SHARPNESS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[SHARPNESS]

 

 

[TINT]

 

 

[COLOR]

 

Adjust to detail in the picture.

 

 

 

 

 

[-] :make soft

[+] : make clear

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Notes:

The display will disappear automatically after 10 seconds unless you press any buttons.

Magnetism from nearby appliances and speakers might affect the color of the TV picture. If this happens, press [POWER] to turn off the TV and turn it on again after about 30 minutes.

AV MEMORY

1 Select “PICTURE”

MENU

 

PICTURE

 

CHANNEL SET

 

[ENG] / ESP / FRA

 

V-CHIPSET UP

VOL

CAPTION [OFF]

TV SOUND [MAIN]

2 Select the desired picture mode

CH

MANUAL

CH

GAME MODE

[MANUAL] [SPORT]

[GAME] [MOVIE][NEWS]

3 To exit the menu

MENU

Note:

To manually customize the picture, see PICTURE ADJUSTMENT section.

This feature is helpful for playing video games. By pressing [GAME], you can set Game mode (suitable picture setting for games) and TV selects automatically front A/V input.

1 To use video games

GAME

GAME

Picture: GAME

Input: Front (VIDEO2)

2 To cancel Game mode only

MENU

MANUAL

VOL

Select “PICTURE”

After 10 seconds

VIDEO2

Picture: Customized

Input: Front (VIDEO2)

3To watch another input (TV or Rear Input)

VIDEO1

INPUT

SELECT

repeatedly

Notes:

If you press [GAME] when the TV is off, the TV turns on and will be in Game mode and external input mode automatically.

If you adjust another picture control while in Game mode, this mode will automatically be canceled.

CLOSED CAPTION

You may view specially labeled (cc) TV programs, movies, news and prerecorded tapes, etc. with either a dialogue caption or text display added to the program.

1 Select “CAPTION”

MENU

 

PICTURE

 

CHANNEL SET

 

[ENG] / ESP / FRA

 

V-CHIPSET UP

 

CAPTION [OFF]

CH

TV SOUND [MAIN]

CH

 

2 Select the desired caption mode

VOL VOL

[OFF] [C1][C2]

[T2]

 

[T1]

 

3 To exit the menu

MENU

[CAPTION MODE (C1, C2)]

CAPTION1 (C1)

displays standard closed captions (what a character is saying).

CAPTION2 (C2)

displays foreign language closed captions (foreign language words showing what a character is saying).

There are three ways of displaying according to programs:

Paint-on mode: Displays input characters on the screen immediately.

Pop-on mode : Once characters are stored in memory, they are displayed all at once.

Roll-up mode : Displays the characters continuously by scrolling (max. 4 lines).

[TEXT MODE (T1, T2)]

TEXT1 (T1) and TEXT2 (T2) display half-screentext by scrolling (such as a channel guide, schedule or announcement).

Notes:

If closed captioning is not broadcast, you cannot receive it and nothing is displayed.

When your TV receives a special effects playback signal (i.e., Search, Slow and Still) from a VCR’s video output channel (CH3 or CH4), the TV may not display the correct caption or text.

Captions and texts may not match the TV voice exactly.

Interference may cause the closed caption system not to function properly.

The caption or text characters will not be displayed while the menu display or functions display is shown.

If a black box appears on the screen, this means that the TV is set to TEXT mode. To clear screen, select CAPTION [C1], [C2] or [OFF].

OPTIONAL SETTINGS

LANGUAGE SELECTION

1 Select [ENG]

2

Select the desired language

MENU

PICTURE

VOL VOL

 

 

 

 

 

CHANNEL SET

[ENG(lish)]

[ESP(añol)]

 

[ENG] / ESP / FRA

 

V-CHIPSET UP

 

 

 

CAPTION [OFF]

[FRA(nçais)]

CH

TV SOUND [MAIN]

3

CH

To exit the menu

 

 

 

 

 

 

MENU

 

L :
S :
V :

OPTIONAL SETTINGS (Continued)

V-CHIPSET UP

This enables parents to prevent their children from watching inappropriate material on TV. The limitation is not available for news,

sports programs, unedited movies on premium cable channels and Emergency Broadcast System signals.

When you try to access to a program which is blocked, “PROTECTED PROGRAM by

...” message appears on the TV screen.

Programming may be rated by the Motion Picture Association of America (MPAA) or according to the Television Parental Guidelines. In order to block any inappropriate programming, set your limits in both MPAA RATING and TV RATING.

1 Select“V-CHIPSET UP”

MENU

 

 

 

PICTURE

 

 

 

CHANNEL SET

 

 

 

[ENG] / ESP / FRA

 

 

 

V-CHIPSET UP

 

 

 

CAPTION [OFF]

 

CH

 

TV SOUND [MAIN]

 

CH

 

 

 

VOL

 

 

2 Enter4-digitcode

 

1

2

3

ACCESS CODE

4

5

6

_ _ _ _

7

8

9

 

0

If you have not set up your personal access code, enter 0000 (default access code).

3 Select a feature to set up

CH

TV RATING

A

 

B

CH

MPAA RATING

 

CHANGE CODE

C

 

 

A [TV RATING SET UP]

4 Select a rating

 

TV-Y

[VIEW]

CH

TV-Y7(

) [VIEW]

TV-G

[VIEW]

CH

TV-PG(

) [VIEW]

TV-14(

)[VIEW]

 

 

TV-MA(

)[VIEW]

<Selection> <Rating Category Explanations>

TV-Y :Appropriate for all children

TV-Y7 :Appropriate for children seven

and older

TV-G :General Audience

TV-PG :Parental Guidance suggested

TV-14 :Unsuitable for children under

14

TV-MA :Mature audience only

5-1 * Rating with no sub categories Set to [BLOCK] or [VIEW]

 

TV-Y

[VIEW]

VOL

TV-Y7(

) [VIEW]

TV-G

[BLOCK]

 

TV-PG(DLSV)[BLOCK]

TV-14(DLSV)[BLOCK]

TV-MA(DLSV)[BLOCK]

5-2 * Rating with sub categories

VOL

TV-Y

 

 

 

[VIEW]

2 times

TV-Y7

(

)

[VIEW]

TV-G

 

 

 

[VIEW]

 

 

TV-PG

(

)

[VIEW]

 

 

TV-14

(

)

[VIEW]

 

 

TV-MA

(

)

[VIEW]

 

 

 

 

 

 

 

 

Sub

categories

Select a rating

 

 

 

 

 

CH

TV-PG

 

 

[BLOCK]

CH

D

 

 

[BLOCK]

 

 

L

 

 

[BLOCK]

 

 

S

 

 

[BLOCK]

 

 

V

 

 

[BLOCK]

VOL

Set to [BLOCK] or [VIEW]

 

TV-PG

[BLOCK]

VOL

D

[VIEW]

 

L

[BLOCK]

 

S

[BLOCK]

 

V

[BLOCK]

 

 

 

<Selection> <Rating Category Explanations>

TV-Y7

FV : Fantasy Violence

TV-PG /TV-14 /TV-MA :

D : Suggestive Dialog

(TV-PG,TV-14only)

Coarse Language

Sexual Situation

Violence

6 To exit the menu

MENU

B [MPAA RATING SET UP]

4 Select a rating

 

G

[VIEW]

CH

PG

[VIEW]

PG-13

[VIEW]

 

CH

R

[VIEW]

NC-17

[VIEW]

 

 

X

[VIEW]

5 Set to [BLOCK] or [VIEW]

 

 

G

[VIEW]

 

repeatedly

PG

[VIEW]

VOL

PG-13

[VIEW]

 

 

R

[BLOCK]

 

 

NC-17

[BLOCK]

 

 

X

[BLOCK]

 

 

 

 

<Selection> <Rating Category Explanations>

G : General Audience

PG : Parental Guidance suggested

PG-13 :Unsuitable for children under

13

• R : Restricted; under 17 requires accompanying parent or adult guardian

NC-17 :No one under 17 admitted

X : Mature audience only

6 To exit the menu

MENU

Notes (for TV RATING and MPAA RATING):

You cannot access the setup menu when the “PROTECTED PROGRAM by ...” message appears. Move to an unblocked channel before you press [MENU].

When you select a rating and set it to [BLOCK], the higher ratings will be blocked automatically. The lower ratings will be available for viewing.

When you set the lowest rating to [VIEW], all other ratings will automatically be available for viewing.

C [CHANGING THE ACCESS CODE]

4 Enter4-digitcode

 

1

2

3

NEW CODE

 

 

 

4

5

6

[ [ [ [

7

8

9

CONFIRM CODE

 

 

 

_ _ _ _

 

0

 

 

5 To exit the menu

MENU

Notes:

Make sure you enter exactly the same new code in the “CONFIRM CODE” space as one in the “NEW CODE” space. If they are differrent, the “NEW CODE” space is cleared for redoing.

Your personal access code will be erased and will return to the default (0000) when a power failure occurs or when you turn off the power using a wall switch. If you have forgotten the code, unplug the power cord for 10 seconds to restore the access code to 0000.

TROUBLESHOOTING GUIDE

Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. Before arranging for service, check these items. It could save your time and money.

QUICK SERVICE CHECK LIST

PROBLEM

doesn’tcontrolRemotework

screenonBars

distortedPicture

verticallyrollsPicture

colorNo

onreceptionPoorsome channels

pictureWeak

instreaksorLinespicture

pictureinGhosts

blurredPicture

pictureOK,Soundpoor

soundOK,Picturepoor

soundorPictureNo

markscolorDifferenton screen

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

POSSIBLE REMEDY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Try a new channel, if OK, then possible station trouble.

Is TV plugged in? Power at outlet?

Is TV’s power on?

Is antenna or cable connected to terminal on the back of the set?

If outside antenna is being used, check for broken wire or loose connection.

Check for local interference.

Turn off the TV and then turn it on after about a minute.

Adjust COLOR control.

Adjust CONTRAST & BRIGHT control.

Check batteries in remote control.

Move the TV away from the nearby appliances which generate a magnetic field.

Turn off using [POWER], then turn it on again 30 minutes later or so.

Check if there is an obstacle between the sensor and the remote control.

Test the signal output.* If OK, then possible remote sensor trouble.

*Tune an AM radio to a band with no broadcasting. Press a button on the remote control toward the radio. Sound will be fluttering when you press any key and the radio receives the signal. This means the remote control unit is working.

Closed Caption Problem

Possible Remedy

Misspelled captions are shown.

Spelling errors may pass through uncorrected by the closed caption-

 

ing production company in a live broadcast.

 

 

Text is not shown in its entirety

Captions that are delayed a few seconds behind the actual dialogue

or there is a delay of what is being said.

are common for live broadcasts. Most captioning production compa-

 

nies can display a dialogue to a maximum of 220 words per minute.

 

If a dialogue exceeds that rate, selective editing is used to insure that

 

the captions remain up-to-datewith the current TV screen dialogue.

 

 

Captions are scrambled with white boxes

Interference caused by building, power lines, thunderstorms, etc.

on the TV screen.

may cause scrambled or incomplete captions to appear.

 

 

No captions are displayed in a program

Broadcasters may use a time compression process to the actual pro-

which must contain closed caption.

gram so that additional advertising time can be given. In this case,

 

captions will be lost since the decoder cannot read the compressed

 

information.

 

 

No captions are displayed when playing a

The videotape may be either an illegal copy or the tape duplicating

prerecorded videotape with closed caption.

company may accidentally have left out the captioning signals dur-

 

ing the copying process.

 

 

The TV screen shows a black box.

You are in TEXT mode. Select CAPTION [C1], [C2] or [OFF].

 

 

MAINTENANCE

CABINET CLEANING

Wipe the front panel and other exterior surfaces of the TV with a soft cloth immersed in lukewarm water and wrung dry.

Never use a solvent or alcohol. Do not spray insecticide liquid near the TV. Such chemicals may cause damage and discoloration to the exposed surfaces.

PICTURE TUBE CLEANING

Wipe the picture tube of the TV with a soft cloth. Before cleaning the picture tube, disconnect the power cord.

SUPPLIED ACCESSORIES

Owner’s Manual

Remote control unit

Batteries

(1EMN21492)

(N0160UE)

(“AA” x 2)

SPECIFICATIONS

GENERAL SPECIFICATIONS

Television system:

NTSC-M

Closed Caption

TV Standard

 

System:

§15.119/FCC

Channel coverage

 

VHF:

2 ~ 13

UHF:

14 ~ 69

CATV:

2 ~ 13, A ~ W,

 

W+1 ~ W+84,

 

A-5~A-1,5A

Tuning System:

181 channel

 

frequency synthesized

 

tuning system

Channel access:

Direct access keyboard,

 

programmable

Terminals

scan and up/down

 

Antenna input:

VHF/UHF/CATV

 

75 ohm unbalanced

 

(F-type)

S-Videoinput:

Mini DIN 4-pinjack

Video input:

RCA connector x 2

 

(1 x Front / 1 x Rear)

Audio input:

RCA connector x 6

(2 (L/R) x Front / 4 (L/R) x Rear)

Audio output:

RCA connector x 2

Component Video Input

One pin jack (Y) / 1Vpp (75 ohm)

Two pin jacks (PB/PR) / 700mVpp (75 ohm) Stereo Sound System

2 speakers

ELECTRICAL SPECIFICATIONS

Sound output: 2W, 8 ohm x2

OTHER SPECIFICATIONS

Remote control:

Digital encoded

Operating

infrared light system

 

temperature:

5°C to 40°C

 

(41°F~104°F)

Power requirements:

AC120V, 60Hz

Power consumption

 

(Maximum):

134W

Picture tube:

32"

Dimensions:

H : 26-3/8"(671mm)

 

W: 29-15/16"(760mm)

 

D : 21-1/4"(540mm)

Weight:

112.6 lbs. (51kg)

•Designs and specifications are subject to change without notice and without our legal obligation.

•If there is a discrepancy between languages, the default language will be English.