Symphonic LCD TV-DVD User Manual

Size:
1.5 Mb
Download

TV SECTION

TV OPERATION AND SETTINGS

POWER PICTURE SELECT EJECT

1

2

3

 

 

 

 

CH.

4

5

6

 

7

8

9

 

SLEEP

 

+100

VOL.

 

0

+10

 

SKIP

 

ZOOM

MUTE

 

 

PLAY

 

REV

 

 

FWD

 

 

STOP

 

 

SLOW

DISC

PAUSE

MENU

 

 

DISPLAY

ENTER

NOTE

For channel number selection with number buttons:

To select single-digitchannel number, press

[0]first. (e.g. Press [0] [2] for channel 2.)

To select cable channels which are higher than 99, press [+100/+10] first.

(e.g. Press [+100/+10] [2] [5] for channel 125.)

4 Press[VOL. X/ Y] to select the desired volume level.

VOL.

VOLUME

20

C C C C C C C C C C C C C C C C

Press[MUTE]

the sound.

Press it again

volume

level.

 

SETUP TITLE

RETURN

NOTE

 

 

 

If you press

DVD mode,

Shaded buttons are used for following operation.

you can

. Even if you

turn off the

mode, when you

 

 

turn it on

the TV mode.

WATCHING A TV PROGRAM

1 Plug the power cord into a standard AC outlet.

NOTE

If any digits are displayed in the corner of the screen, press [POWER] without unplugging the power cord.

2 Press[POWER] to turn on the unit.

POWER

3 Press[CH. K/ L] to select the desired channel number.

CH.

OR

Press the Number buttons to enter the desired channel number.

1

2

3

4

5

6

7

8

9

 

 

+100

 

0

+10

TO WATCH CABLE OR SATELLITE CHANNEL

If the unit is connected to a cable box or satellite box, press [CH. K / L] to select CH3 or CH4 according to the output channel setting of the device and select desired channel on that device.

TO WATCH EXTERNAL INPUT

When an external equipment is connected to AUDIO/VIDEO input jacks on the right side, press [SELECT] or[CH. K / L] repeatedly until“VIDEO1” or“VIDEO2” appears on the screen.

NOTE

the unit, “DISC INSIDE” mes-

 

on the screen for 10 seconds.

DISC INSIDE

To clear the message instantly, press[CLEAR].

TV OPERATION AND SETTINGS

TV SECTION

- 11 -

EN

CHANNEL SET UP

AUTO CHANNEL PROGRAMMING

As the initial setting, this unit has memorized all channels, including the ones not available in your area. This feature automatically puts only available channels into the memory.

1 Press[SETUP] then press[K] or[L] to point to “CHANNEL SET UP”.

 

- TV SET UP -

SETUP

B CHANNEL SET UP

V-CHIPSET UP

 

LANGUAGE

[ENGLISH]

 

CAPTION

[OFF]

 

BACK LIGHT [BRIGHT]

2 Press[ENTER] then press[K] or[L] to point to “AUTO PRESET CH”.

– CHANNEL SET UP –

ADD / DELETE CH (CATV)

B AUTO PRESET CH

ENTER

3 Press[ENTER].

ENTER

The tuner scans and memorizes all the active channels in your area.

The tuner stops on the lowest memorized channel.

NOTE

When “AUTO PRESET CH” is activated where there is no TV signal input,“NO TV SIGNAL” will appear on the display after the completion of channel scanning.

The unit may recognize CATV channels to be TV channels if reception condition is poor. In this case, check the antenna connection and try “AUTO PRESET CH” again when reception conditions are better.

Auto channel programming is NOT necessary when connected to a cable box or satellite box. Just select the channel for cable box or satellite input (ex. CH3 or CH4) on the unit, then select your desired channel on the cable box or satellite box.

ADDING/DELETING CHANNELS

The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.)

1 Press[SETUP] then press[K] or[L] to point to “CHANNEL SET UP”.

 

- TV SET UP -

SETUP

B CHANNEL SET UP

V-CHIPSET UP

 

LANGUAGE

[ENGLISH]

 

CAPTION

[OFF]

 

BACK LIGHT [BRIGHT]

2 Press[ENTER] then press[K] or[L] to point to “ADD/DELETE CH”.

– CHANNEL SET UP –

B ADD / DELETE CH (CATV)

AUTO PRESET CH

ENTER

3 Press[ENTER] then press

but-

tons or[CH. K/ L] to select

 

channel number.

 

 

 

 

 

 

 

15

 

1

2

3

 

ENTER

4

5

6

 

7

8

9

 

 

 

 

 

 

+100

 

 

 

0

+10

ADD/DELETE

4 Press[ENTER] then the turned to red. The channel memory. If the channel blue, the channel is added

ENTER

 

To delete another channel,

4.

If you press [ENTER] again, memorized again.

Added channel : Light blue

Deleted channel : Light red

5 Press[SETUP] to exit the

SETUP

NOTE

To confirm that channel(s) deleted or added, press

- 12 -

EN

POWER PICTURE SELECT EJECT

SKIP

ZOOM MUTE

 

PLAY

 

REV

 

FWD

 

STOP

 

 

SLOW

DISC

PAUSE

MENU

 

DISPLAY

ENTER

Shaded buttons are used for following operation.

PICTURE CONTROL

The unit’s picture controls, brightness, contrast, color, tint and sharpness, are preset to factory specifications. Although they are usually the best, you may need to make some further adjustments for a more natural looking image.

1 Press[PICTURE] then press[K] or[L] to select the desired control “BRIGHTNESS”, “CONTRAST”, “COLOR”, “TINT” or “SHARPNESS”.

PICTURE

BRIGHTNESS

- +

2 Press[s] or[B] to adjust to your desired level within 5 seconds.

NOTE

The picture control display

-

cally after 10 seconds unless

.

Magnetism from near by

 

might affect the color of TV

-

pens, press [POWER] to

turn

it on again after about 30

 

 

 

BACK LIGHT

 

1 Press[SETUP] then

point

to “BACK LIGHT”.

- TV SET UP -

CHANNEL SET UP

V-CHIPSET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

B BACK LIGHT [BRIGHT]

2 Press[ENTER] then press[s] or[B] to select to “BRIGHT”, “NORMAL” or “DARK”.

ENTER

3 Press[SETUP].

SETUP

SLEEP TIMER

The Sleep Timer function turns off the unit without using [POWER] after a desired period of time.

1 Press[SLEEP].

SLEEP

SLEEP 0 MINUTE

2 Press[SLEEP] repeatedly until the desired sleep time is displayed.

SLEEP

TV OPERATION AND SETTINGS

TV SECTION

 

 

 

BRIGHTNESS

to decrease

to increase

 

brightness

brightness

 

 

 

CONTRAST

to decrease

to increase

 

contrast

contrast

 

 

 

COLOR

to pale

to brilliant

 

 

 

TINT

to purple

to green

 

 

 

SHARPNESS

to soft

to clear

Even if there is a power failure of any kind, the unit will retain its memory for this feature.

Each press increases the time by 10 minutes up to 90 minutes.

After 5 seconds, the Sleep Timer setting will disappear automatically.

If you select “SLEEP 0 MINUTE”, Sleep Timer setting is canceled.

- 13 -

EN

CLOSED CAPTION SYSTEM

You

labeled (cc) TV programs,

 

-recordedtapes with either a

 

display.

 

can watch dramas, movies and

news

the dialogues and the contents

of

 

TEXT

watch half screen text informa-

tion

 

1-2:

captions or text information

by

or “2”. Caption“2” is usually

used

if available.

NOTE

 

NOTE

Even if there is a power failure of any kind, the unit will retain its memory for this feature.

MTS (Multi-ChannelTelevision

Sound) System

TO SELECT TV SOUND MODE

1 Press[AUDIO] repeatedly to select the MTS output mode.

are broadcast with closed cap-

AUDIO

 

designed to provide error-free

 

 

high quality antenna, cable

 

STEREO

Conversely, poor quality sig-

 

The output

 

in caption errors or no

described below

signal conditions which

every time

 

errors are listed below:

STEREO

MONO

noise

 

 

brush noise

 

 

on TV screen

* Second Audio

 

reception displaying picture

Sometimes

another channel of

flutter

audio to the

This is usually a

a black box on the TV

secondary

a radio station.

that the unit is set to the

After 5

status will

screen, select

disappear

 

or “OFF”.

NOTE

 

 

 

The initial setting is “STEREO”.

This setting is saved even if the unit is turned off or the AC cord is unplugged.

1 Press[SETUP] then press[K] or[L] to point to “CAPTION”.

 

- TV SET UP -

SETUP

CHANNEL SET UP

V-CHIPSET UP

 

LANGUAGE

[ENGLISH]

 

B CAPTION

[OFF]

 

BACK LIGHT [BRIGHT]

2 Press[ENTER] repeatedly to select the desired caption menu “CAPTION1”, “CAPTION2”, “TEXT1” or “TEXT2”.

- TV SET UP -

CHANNEL SET UP

V-CHIPSET UP

ENTER LANGUAGE [ENGLISH]

B CAPTION [CAPTION1]

BACK LIGHT [BRIGHT]

If you select “OFF”, Closed Caption System setting is canceled.

3 Press[SETUP] to exit the menu.

SETUP

TO CHECK THE SOUND STATUS

By pressing [DISPLAY], the status shown below will appear on the display when you receive a broadcast on the unit tuner channel you are watching.

CH 123

STEREO/SAP 3)

2)

1)

1)When a program is broadcast in stereo, “STEREO” appears on the TV screen.

2)When a program is broadcast in second audio, “SAP” appears on the TV screen.

3)When a program broadcast both in stereo and second audio, “STEREO/SAP” appears on the TV screen.

- 14 -

EN

1

2

3

 

 

 

 

CH.

4

5

6

 

7

8

9

 

SLEEP

 

+100

VOL.

 

0

+10

 

SKIP

 

ZOOM

MUTE

 

PLAY

 

REV

 

 

FWD

 

STOP

 

 

SLOW

 

DISC

PAUSE

 

MENU

 

 

DISPLAY

 

 

 

 

 

ENTER

 

SETUP

TITLE

 

RETURN

Shaded buttons are used for following operation.

V-CHIPSET UP

V-CHIPSET UP

This feature enables parents to

 

children

from watching inappropriate

 

“PRO-

you try to access a program

 

TECTED PROGRAM by ...”

 

on

the TV screen.

 

 

1 Press[SETUP] then press

point

to “V-CHIPSET UP”.

 

 

 

 

- TV SET UP -

SETUP

 

CHANNEL SET UP

B V-CHIPSET UP

 

 

LANGUAGE [ENGLISH]

 

 

CAPTION [OFF]

 

 

BACK LIGHT [BRIGHT]

2 Press[ENTER] then press the Number Buttons to enter the access code.

 

ACCESS CODE

1

2

3

 

 

 

 

4

5

6

ENTER

_ _ _ _

7

8

9

 

0

For the first time set-upor in the event the unit has lost power, enter the default code of 0000.

3 Press[K] or[L] to select “TV RATING”, “MPAA RATING” or “CHANGE CODE” then press[ENTER].

V-CHIPSET UP –

BTV RATING MPAA RATING

CHANGE CODE

ENTER

 

TV RATING:

A

SET UP

MPAA RATING:

B

SET UP

CHANGE CODE

C

CODE

A TV RATING

Follow steps 1 to3

 

 

UP.

4 Press[K] or[L]

 

desired TV rat-

ing to be blocked

 

 

repeat-

edly to set

 

 

 

B TV–Y

 

[VIEW]

 

TV–Y7(

)

[VIEW]

 

TV–G

 

[VIEW]

ENTER

TV–PG(

)

[VIEW]

TV–14(

)

[VIEW]

 

TV–MA(

)

[VIEW]

 

Selection

Rating Category Explanations

TV-Y

Appropriate for all children

TV-Y7

Appropriate for children seven and older

TV-G

General Audience

TV-PG

Parental Guidance suggested.

TV-14

Unsuitable for children under 14

TV-MA

Mature audience only

 

 

NOTE

When you select a rating and set it to “BLOCK”, the higher ratings will be blocked automatically. The lower ratings will be available for viewing.

TV–Y

 

[VIEW]

TV–Y7(

)

[VIEW]

B TV–G

 

[BLOCK]

TV–PG(DLSV )

[BLOCK]

TV–14(DLSV )

[BLOCK]

TV–MA(

LSV)

[BLOCK]

When you set the lowest rating to “VIEW”, all other ratings will automatically be available for viewing.

5 When you select the ratings ofTV-Y7,TV-PG,TV-14orTV-MAyou will have the option of setting sub rating categories.

Press [K] or[L] to select a rating with subratings you wish to block, then press

[ENTER] twice.

Press [K] or[L] to select asub-rating,then press[ENTER] to set it to “BLOCK” or “VIEW”.

Selection

Rating Category Explanations

TV-Y7

 

FV

Fantasy Violence

TV-PG,TV-14,TV-MA

D

Suggestive Dialog (TV-PG,TV-14only)

L

Coarse Language

S

Sexual Situation

V

Violence

NOTE

The blocked sub-ratingswill appear next to the rating category in the“TV RATING” menu.

- 15 -

EN

TV OPERATION AND SETTINGS

TV SECTION

6 Press[SETUP] to exit the menu.

SETUP

NOTE

To change the rating, the TV must be turned to an unprotected program. If “PROTECTED PROGRAM by ...” appears on the screen, please change the channel to a station that is not protected.

B MPAA RATING SET UP

Follow steps 1 to3 in theV-CHIP SET UP on page 15.

4 Press[K] or[L] to point to your desired item, then press[ENTER] to select “BLOCK” or “VIEW”.

G

[VIEW]

PG

[VIEW]

PG–13

[VIEW]

B R

[BLOCK]

NC–17

[BLOCK]

X

[BLOCK]

Selection

Rating Category Explanations

G

General Audience

PG

Parental Guidance suggested.

PG-13

Unsuitable for children under 13

RRestricted; under 17 requires accompanying parent or adult guardian

NC-17No one under 17 admitted

X Mature audience only

When you select a rating and set it to “BLOCK”, the higher ratings will be blocked automatically. The lower ratings will be available for viewing.

When you set the lowest rating to “VIEW”, all other ratings will automatically be available for viewing.

5 Press[SETUP] to exit the menu.

SETUP

C CHANGE ACCESS CODE

Follow steps 1 to3 in theV-CHIP SET UP on page 15.

4 Press theNumber buttons to enter your desired access code in the “NEW CODE” space, then enter the same code in the “CONFIRM CODE” space. When completed, the menu will return to“V-CHIPSET UP”.

1

2

3

NEW CODE

X X X X

4

5

6

 

7

8

9

CONFIRM CODE

 

 

 

 

 

 

_ _ _ _

 

0

 

 

Make sure you enter exactly the same new code in the “CONFIRM CODE” space as one in the“NEW CODE” space. If they are different, the“NEW CODE” space is cleared for redoing.

5 Press[SETUP] to exit the menu.

SETUP

NOTE

Your personal access code will be erased and will return to the default (0000) when a power failure occurs or when you turn off the power using a wall switch. If you have forgotten the code, unplug the power cord for 10 seconds to restore the access code to 0000.

MENU LANGUAGE

1 Press[SETUP] then press[K] or[L] to point to “LANGUAGE”.

 

- TV SET UP -

 

CHANNEL SET UP

SETUP

V-CHIPSET UP

 

B LANGUAGE

[ENGLISH]

 

CAPTION

[OFF]

 

BACK LIGHT [BRIGHT]

2 Press[ENTER] repeatedly to select “ENGLISH”, “ESPAÑOL”= Spanish or “FRANÇAIS”= French.

ENTER

3 Press[SETUP] to exit the menu.

SETUP

NOTE

This function effects only the language on the screen menu and not the audio source.

If for some reason the menu is in Spanish or French, press [SETUP], press[K] or[L] to point to“IDIOMA [ESPAÑOL]” or“LANGAGE [FRANÇAIS]”, then press[ENTER] repeatedly to select desired language, then press[SETUP].

- 16 -

EN

DVD SECTION

ABOUT THE DISCS

PLAYABLE DISCS

Playable

Mark (logo)

Region code

Recorded

Disc size

Disc type

discs

signals

 

 

 

 

DVD-Video

or

* 1,2,4,6,10,11

 

DVD-RW

 

 

 

 

 

Example

 

 

 

 

 

 

 

 

 

 

 

 

 

DVD-R

-

Digital video

5 inches

 

 

 

 

Title 1

 

 

 

Title 2

 

 

 

 

 

* 1,3,4,5,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(MPEG2)

(12cm)

Chapter 1

 

Chapter 2

 

Chapter 3

 

Chapter 4

Chapter 1

 

Chapter 2

 

6,7,9,10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVD+RW

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVD+R

-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

* 1,3,4,5,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6,8,9,10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Audio CD

-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

* 4,6,10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Digital audio

5 inches

 

Example

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(12cm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CD-RW

 

 

 

 

Track 1

 

Track 2

 

 

Track 3

 

 

Track 4

 

Track 5

 

Track 6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CD-R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

* 4,5,6,9,10

 

 

-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

is a trademark of DVD Format/Logo Licensing Corporation.

If you cannot play back a disc which bears one of the marks above, check the following notes.

*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back. *2: Certain DVD-Videodiscs do not operate as described in this manual due to the intentions of the disc’s producers. *3: Discs recorded in the VR (Video Recording) format cannot be played back.

*4: Scratched or stained discs may not be played back.

*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special properties of discs.

*6: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not play them back. Even if they are played back, the sound or video quality will be compromised.

*7: You may play back the unfinalized DVD-R/RWdisc recorded in the video format on our brand’s DVD recorder. However, depending on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may not be smooth, etc.). In this case, you need to finalize the disc with the DVD recorder. Refer to the manual accompanying the DVD recorder.

*8: Only the discs recorded in the video format and finalized can be played back.

Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may not be smooth, etc.).

*9: If there is too much recording space left on a disc (the used portion is less than 2-3/16"(55mm) across), it may not play back properly. *10: Do not glue paper or put stickers on to the disc. These may damage the disc and the unit may not read it correctly. *11: The number inside the symbol refers to a region of the world and a disc encoded in a specific region for-

mat can only be played back on unit with the same region code.

UNPLAYABLE DISCS

NEVER play back the following discs. Otherwise, the unit may result in malfunction.

DVD-RAM /CD-i /Photo CD / Video CD / MP3 / DVD with region codes other than 1 or ALL /DTS-CD /DVD-ROMfor personal computers /CD-ROMfor personal computers

Never insert a disc which is broken or whose form is abnormal (other than 5 inch (12cm) round disc).

On the following disc, the sound MAY NOT be heard.

Super Audio CD

NOTE

Only the sound recorded on the normal CD layer can be delivered.

The sound recorded on the high density Super Audio CD layer cannot be delivered.

Any other discs without compatibility indications

ABOUT THE DISCS

DVD SECTION

– 17 –

EN

PLAYING A DISC

POWER PICTURE SELECT EJECT

1

2

3

 

 

 

 

CH.

4

5

6

 

7

8

9

 

SLEEP

 

+100

VOL.

 

0

+10

 

SKIP

ZOOM

MUTE

 

PLAY

 

REV

 

FWD

 

STOP

 

 

SLOW

 

DISC

PAUSE

 

MENU

 

 

DISPLAY

 

 

 

 

 

ENTER

 

SETUP

TITLE

 

RETURN

CLEAR

SEARCH MODE

REPEAT

A-B

MODE AUDIO SUBTITLE ANGLE

Shaded buttons are used for following operation.

BASIC PLAYBACK

GETTING STARTED

Turn on the power of amplifier and any other components, if necessary.

1 Press[POWER] then the power will turn on.

POWER

2 Open the disc door manually.

3 Insert a disc with the label facing back of the unit to start playing it. By simply placing the disc gently into the slot, it will be loaded automatically.

Playback will start from the first chapter/track of the disc.

If the playback does not start automatically, press [PLAY O].

When you playback a DVD which features a title menu, it may appear on the screen. In this case, refer to “TITLE MENU” on page 19.

4 Press[STOP C] to stop playback.

STOP

5 Press[EJECT A] to remove the disc from the unit.

EJECT

NOTE

When the DVD mode has been switched to the TV mode, the DVD mode shuts down first and then the TV picture and sound appears in about 4 seconds. Similarly, when [POWER] is press to turn off in the DVD mode, this mode shuts down first and then the unit is turned off.

may appear at thetop-righton the TV screen during operation, warning that a prohibited operation has been encountered by the DVD or the disc.

With DVDs that use titles for playback program signals, playback may start from the second title or it may skip these titles.

During the playback of a two layered disc, pictures may stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a malfunction.

– 18 –

EN

DISC MENU

1 Press [DISC MENU].

DISC

MENU

The DVD main menu will appear.

If the feature is not available, symbol may appear on the TV screen.

If disc menu is available on the disc, audio language, subtitle options, chapters for the title and other options will appear for selection.

2 Press[K],[L],[s] or[B] to select an item and press[ENTER] to confirm selection.

ENTER

TITLE MENU

1 Press[TITLE].

TITLE

The title menu will appear.

 

If the feature is not available,

symbol may

appear on the TV screen.

 

2 Press[K],[L],[s] or[B] to select an item then press[ENTER] to confirm selection.

ENTER

CALLING UP A MENU SCREEN DURING PLAYBACK

Press [DISC MENU] to call up the DVD menu or press[TITLE] to call up the title menu.

NOTE

Contents of menu and corresponding menu operations may vary between discs. Refer to the manual accompanying the disc for details.

RESUME

1 During playback, press[STOP C].

 

Resume ON

STOP

Press ’PLAY’ to play from here.

 

 

To play the beginning,

 

press ’STOP’ first and then ’PLAY’.

Resume message will appear on the TV screen.

2 Press[PLAY O], playback will resume from the point at which playback was stopped.

PLAY

To cancel resume, press [STOP C] twice.

The resume information stays on even when the power is turned off.

PAUSE

1 During playback, press[PAUSE F].

PAUSE

Playback will pause and sound will be muted.

2 To continue playback, press[PLAY O].

PLAY

STEP BY STEP PLAYBACK

DISCA

 

1 During playback, press[PAUSE F].

LAYING

PAUSE

P

Playback will pause and sound will be muted.

SECTIONDVD

2 The disc goes forward by one frame each

 

time [PAUSE F] is pressed.

 

PAUSE

 

3 To exit step by step playback, press[PLAY O].

 

PLAY

 

– 19 –

EN

FAST FORWARD /

ZOOM

FAST REVERSE

 

1 During playback, press[FWD D] or

[REV E].

REV

FWD

SLOW

“ D 1” or“E 1” appears on the screen.

2 To select another speed, repeat step1 until your required speed number appears on the screen.

For DVDs, fast forward/reverse search speed is

different depending on the disc. Approximate speed is 1 (×2), 2 (×8), 3 (×20), 4 (×50) and 5 (×100).

For Audio CDs approximate speed is 1 (×2), 2 (×8) and 3 (×30).

3 To return to normal playback, press[PLAY O].

PLAY

SLOW FORWARD /

SLOW REVERSE

1 During playback, press[PAUSE F].

PAUSE

2 Press [FWDD]or [REVE].

REV

FWD

SLOW

1” or 1” appears on the screen.

3 To select another speed, repeat step2 until your required speed number appears on the screen.

Slow forward or reverse speed varies with the disc. Approximate speed is 1 (1/16), 2 (1/8) and 3 (1/2).

4 To return to normal playback, press[PLAY O].

PLAY

The Zoom function allows you to enlarge the video image and to pan through the enlarged image.

1 Press[ZOOM] during playback.

ZOOM

Playback will continue.

2 Press[ZOOM] repeatedly to select the required zoom factor: ZOOM1, ZOOM2, ZOOM3 or OFF.

ZOOM

3 Press[K],[L],[s] or[B] to move the zoomed picture across the screen.

4 To exit zoom mode, press[ZOOM] to OFF.

ZOOM

NOTE

Zooming function does not work while disc menu is shown.

Zooming function is not available on some discs.

It may take several seconds to slide the zoomed picture.

The picture may be distorted if you operate other functions repeatedly (ex. [PAUSE F] or[REV E], etc.) in the zoom mode.

– 20 –

EN