Swann SW234-PC2 User Manual

0 (0)
Swann SW234-PC2 User Manual

Helpdesk / Technical Support Details

Swann Technical Support

All Countries E-mail: tech@swannsecurity.com Telephone Helpdesk

USA toll free

AUSTRALIA toll free

1-800-627-2799

1300 138 324

(Su, 2pm-10pm US PT)

(M 9am-5pm AUS ET)

(M-Th, 6am-10pm US PT)

(Tu-F 1am-5pm AUS ET)

(F 6am-2pm US PT)

(Sa 1am-9am AUS ET)

USA Exchange & Repairs

NEW ZEALAND toll free

1-800-627-2799

0800 479 266

(M-F, 9am-5pm US PT)

INTERNATIONAL

 

+61 3 8412 4610

See http://www.worldtimeserver.com for information on time zones and the current time in Melbourne, Australia compared to your local time.

Warranty Information

Swann Communications USA Inc.

Swann Communications PTY. LTD.

12636 Clark Street

Building 4, 650 Church Street,

Santa Fe Springs CA 90670

Richmond, Victoria 3121

USA

Australia

Swann Communications warrants this product against defects in workmanship and material for a period of one (1) year from it’s original purchase date. You must present your receipt as proof of date of purchase for warranty validation. Any unit which proves defective during the stated period will be repaired without charge for parts or labour or replaced at the sole discretion of Swann. The end user is responsible for all freight charges incurred to send the product to Swann’s repair centres. The end user is responsible for all shipping costs incurred when shipping from and to any country other than the country of origin.

The warranty does not cover any incidental, accidental or consequential damages arising from the use of or the inability to use this product. Any costs associated with the fitting or removal of this product by a tradesman or other person or any other costs associated with its use are the responsibility of the end user. This warranty applies to the original purchaser of the product only and is not transferable to any third party. Unauthorized end user or third party modifications to any component or evidence of misuse or abuse of the device will render all warranties void.

By law some countries do not allow limitations on certain exclusions in this warranty. Where applicable by local laws, regulations and legal rights will take precedence.

8

© Swann Communications 2008

 

plug&playsecurity

Advanced security made easy™

PenCam Recorder

Mini Video Camera & Recorder

DVR-420™

rating Instructionss

SW234-PC2 / SW234-PCG

SR234-PC2-10006-130309

www.swannsecurity.com

1

Before You Begin

FCC Verification:

NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

·Reorient or relocate the receiving antenna

·Increase the separation between the equipment and the receiver

·Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

·Consult the dealer or an experienced radio/TV technician for help

IMPORTANT: Prohibition against eavesdropping.

Except for the operations of law enforcement officers conducted under lawful authority, no person shall use, either directly or indirectly, a device operated pursuant to the provisions of this Part for the purpose of overhearing or recording the private conversations of others unless such use is authorized by all of the parties engaging in the conversation.

WARNING: Modifications not approved by the party responsible for compliance could void user’s authority to operate the equipment.

IMPORTANT SAFETY INSTRUCTIONS:

·Make sure product is fixed correctly and stable if fastened in place

·Do not operate if wires and terminals are exposed

Package Contents

PenCam Recorder

Operating Instructions

Ink Refill*

*The PenCam is already pre-loaded with an ink cartridge. There is no need to change the cartridge unless the pen is out of ink

Troubleshooting Guide

Problem: The PenCam takes a long time to boot or save recordings

Solution: Delete video you do not need from the PenCam. As the memory fills up the PenCam may take longer to process and save.

Problem: Some of my videos won’t play on my computer.

Solution: Videos can become corrupt and will not play if the PenCam is not used as described in this manual. Pushing the button several times or holding the button can result in corrupt videos. Wait until the PenCam has finished processing before pressing the button again.

Problem: Is it legal to record people in my country?

Solution: It is your responsibility to research the local laws and conditions of use for recordings.

Problem: I can’t see any video on my computer.

Solution: Install the codec pack klcodec417s.exe stored on the PenCam or from our website www.swannsecurity.com

Technical Specifications

Video

 

Video Format:

AVI

Resolution:

352 x 288

Video File Size:

>500KB per min

Recording

 

Recording Mode:

Manual Recording, Continuous

Total Storage Time:

up to 3 Hours (2GB)

General

 

Operating System:

Windows XP, Vista

Internal Memory:

2GB or 4GB

Backup Type:

USB

Battery Type:

Rechargeable Lithium-ion

Charging:

USB via computer

Record Time per Charge:

Approximately 90mins

Battery Charging Time:

Approximately 2 hours

Dimensions:

150mm x 15mm x 15mm

 

5.9” x 0.6” x 0.6”

Weight:

1oz, 30g

2

7

Loading...
+ 2 hidden pages