EM0480
Important instructions – retain for
future use.
Contents
Sunbeam’s Safety Precautions 2
Congratulations
3
Features of your Café Series
™
Conical Burr
Coffee Grinder
4
Functions of your Café Series
™
Conical Burr
Coffee Grinder
6
Operating your Café Series
™
Conical Burr
Coffee Grinder
7
Adjusting the Grind Setting
9
Care and Cleaning
10
2
Sunbeam’s Safety Precautions
SAFETY PRECAUSTIONS FOR YOUR
SUNBEAM COFFEE GRINDER
• Check the grinding bowl for the presence of
foreign objects before using.
• Always operate the grinder with the ground
coffee container properly inserted in the
grinder.
• Do not place your hand in or near the burrs
while the grinder is in operation.
• Always place the unit on a flat, level surface.
• Switch off and unplug at power point before
cleaning.
• Do not attempt to re-grind ground coffee.
Sunbeam are very safety conscious when
designing and manufacturing consumer products,
but it is essential that the product user also
exercise care when using an electrical appliance.
Listed below are precautions which are essential
for the safe use of an electrical appliance:
• Read carefully and save all the instructions
provided with an appliance.
• Always turn the power off at the power outlet
before you insert or remove a plug. Remove
by grasping the plug - do not pull on the cord.
• Turn the power off and remove the plug
when the appliance is not in use and
before cleaning.
• Do not use your appliance with an extension
cord unless this cord has been checked
and tested by a qualified technician or
service person.
• Always use your appliance from a power
outlet of the voltage (A.C. only) marked
on the appliance.
• This appliance is not intended for use by young
children or infirm persons unless they have
been adequately supervised by a responsible
adult to ensure that they can use the appliance
safely.
• Young children should be supervised to ensure
that they do not play with the appliance.
• Never leave an appliance unattended while
in use.
• Do not use an appliance for any purpose
other than its intended use.
• Do not place an appliance on or near a hot gas
flame, electric element or on a heated oven.
Do not place on top of any other appliance.
• Do not let the power cord of an appliance hang
over the edge of a table or bench top or touch
any hot surface.
• Do not operate any electrical appliance with
a damaged cord or after the appliance has
been damaged in any manner. If damage is
suspected, return the appliance to the nearest
Sunbeam Appointed Service Centre
for examination, repair or adjustment.
• For additional protection, Sunbeam
recommend the use of a residual current
device (RCD) with a tripping current not
exceeding 30mA in the electrical circuit
supplying power to your appliances.
• Do not immerse the appliance in water
or any other liquid unless recommended.
If you have any concerns regarding the performance and use of your appliance,
please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.
Ensure the above safety precautions are understood.
3
Congratulations on the purchase of your
Sunbeam Café Series™ Conical Burr Coffee
Grinder.
The Sunbeam Café Series™ delivers quality,
style and superior performance capturing
the essence of the commercial kitchen.
Inspired by heavy-duty equipment found in
restaurants, cafes and bars, the Sunbeam
Café Series™ is built to last. It brings
together a range of appliances designed
to expertly create authentic café food and
beverages at home.
Uncompromising blends of stainless steel,
brass and die-cast alloy characterise the
range. This combined with advanced
technology and functional design, guarantee
the performance, that each product will
surpass expectations.
When making coffee regardless of the
brewing method the flavour of the resulting
brew depends largely on the quality,
freshness and roast of the coffee being used.
Other factors including the purity of the brew
water, condition of the grinder and the actual
design of the burrs within the grinder can
also affect the taste of the final cup.
The Sunbeam Café Series grinder features
tool hardened steel conical burrs for extra
long life. Inherent from the conical burr
design is homogenous grinding so the particle
size of the coffee is consistent and even. This
is especially important for espresso, if the
particle size of the coffee is uniform equal
amounts of the coffee’s aromatic profile will
be extracted. However if the particle size of
the coffee varies some particles will be over-
extracted and some will be under-extracted,
resulting in a poor tasting coffee.
Another advantage of the conical burr design
is its slow rotating operation. This combined
with a gear-driven motor, minimises heat
transfer to the burrs and thus protects the
aromatic profile of the coffee and ultimately
enhances the quality of the resulting brew.
The Sunbeam Café Series™ Conical Burr
Coffee Grinder is designed with quality die-
cast metal components and includes many
features that make grinding coffee at home
easy so you can enjoy a lovely fresh cup of
coffee every time. We hope you enjoy your
new coffee grinder and should you need any
further assistance please don’t hesitate to
contact the Sunbeam Consumer Hotline on
Free Call
Australia
1800 025 059
New Zealand
0800 786 232
Congratulations
Loading...