Carveasy™
Electric Knife
Instruction Booklet
This book covers the use and care of the following Sunbeam Electric Knives:
EK3800 Sunbeam Carveasy™ EK5600 Sunbeam Carveasy Pro™
Please read these instructions carefully and retain for future reference.
EK5600
EK3800
Contents
Sunbeam’s Safety Precautions |
1 |
Features of your Sunbeam Carveasy Pro |
2 |
Features of your Sunbeam Carveasy |
3 |
Using your Sunbeam Carveasy Knife |
4 |
Slicing Hints |
5 |
Care and Cleaning |
6 |
Important instructions – retain for future use.
Sunbeam’s Safety Precautions
SAFETY PRECAUTIONS FOR YOUR |
• |
Serrated edges of the blades are very sharp. |
SUNBEAM ELECTRIC KNIFE. |
• |
Do not allow children to play with blades. |
• Caution is necessary when handling the blades.
|
Sunbeam is very safety conscious when |
• Do not use an appliance for any purpose |
|
designing and manufacturing consumer products, |
other than its intended use. |
|
but it is essential that the product user also |
• Do not place an appliance on or near a hot gas |
|
exercise care when using an electrical appliance. |
flame, electric element or on a heated oven. |
|
Listed below are precautions which are essential |
• Do not place on top of any other appliance. |
|
for the safe use of an electrical appliance: |
• Do not let the power cord of an appliance hang |
• |
Read carefully and save all the instructions |
over the edge of a table or bench top or touch |
|
provided with an appliance. |
any hot surface. |
• |
Always turn the power off at the power outlet |
• Do not operate any electrical appliance with |
|
before you insert or remove a plug. Remove |
a damaged cord or after the appliance has |
|
by grasping the plug - do not pull on the cord. |
been damaged in any manner. If damage is |
• Turn the power off and remove the plug |
suspected, return the appliance to the nearest |
|
|
when the appliance is not in use and |
Sunbeam Appointed Service Centre |
|
before cleaning. |
for examination, repair or adjustment. |
• Do not use your appliance with an extension |
• For additional protection, Sunbeam |
|
|
cord unless this cord has been checked |
recommend the use of a residual current |
|
and tested by a qualified technician or |
device (RCD) with a tripping current not |
|
service person. |
exceeding 30mA in the electrical circuit |
• Always use your appliance from a power |
supplying power to your appliances. |
|
|
outlet of the voltage (A.C. only) marked |
• Do not immerse the appliance in water |
|
on the appliance. |
or any other liquid unless recommended. |
• This appliance is not intended for use by |
• Appliances are not intended to be operated |
|
|
persons (including children) with reduced |
by means of an external timer or separate |
|
physical, sensory or mental capabilities, or |
remote control system. |
|
lack of experience and knowledge, unless they |
• This appliance is intended to be used in |
|
have been given supervision or instruction |
household and similar applications such |
|
concerning use of the appliance by a person |
as: staff kitchen areas in shops, offices and |
|
responsible for their safety. |
other working environments; farm houses; by |
• Children should be supervised to ensure that |
clients in hotels, motels and other residential |
|
|
they do not play with the appliance. |
type environments; bed and breakfast type |
• The temperature of accessible surfaces may be |
environments. |
|
|
high when the appliance is operating. |
|
•Never leave an appliance unattended while in use.
If you have any concerns regarding the performance and use of your appliance, please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.
Ensure the above safety precautions are understood.
1
Features of your Sunbeam Carveasy™ Pro
Blade release button |
Soft touch ergonomic handle |
Extra long stainless steel blades |
|
|
Double movement |
Neon power light |
|
safety trigger |
||
|
||
|
Handy hang up loop |
EK5600 Pictured
Micro serrated stainless steel blades
Serrated stainless steel blades are durable and sharp for efficient slicing and carving.
Blade release button
Conveniently located at the top of the handle for thumb action release of the stainless steel blades.
Double movement safety trigger
Located under the handle for ease of operation, the index-finger trigger action, allowing the most comfortable position for carving. The double movement trigger system provides added safety.
Neon power light
The neon power light indicates when the Carveasy Pro™ is plugged in and switched on.
Handle
Convenient and simple to operate. The ergonomic design provides comfort, versatility and control when carving both vertically and horizontally.
Handy hang up loop
The handy hang-up loop enables the product to be stored conveniently for easy access any time.
Safety guards
For safe fitting and removal of blades
2