Planning Information
Built-In Model 632
Side-by-Side Refrigerator / Freezer
Model 632/F
Framed
Model 632/O
Overlay
Model 632/S (P/B)
Stainless Steel
Front venting allows unit to be completely built in
Serial and model number plate
Adjustable door shelves
Automatic ice maker
Ice storage drawer
Roll-out freezer baskets
Four-sided magnetic gaskets
Removable kickplate
The Sub-Zero Model 632 side-by-side refrigerator/freezer is available in your choice of the framed, overlay or stainless steel design application. Three stainless steel finishes are offered—classic (/S), platinum (/P) and carbon (/B).
Dimensions in parentheses are in millimeters unless otherwise specified.
Hermetically sealed refrigeration units
Lighted electronic control panel
Adjustable dairy compartment
Adjustable roll-out utility basket
Adjustable spillproof glass shelves
Egg tray
Adjustable door shelves
High humidity crisper drawer
Door closers
(Stainless steel design shown)
With the installation of a harness kit, these appliances are Star-K compliant to meet strict religious regulations in conjunction with specific instructions found on star-k.org. You may purchase this harness kit through your Sub-Zero dealer.
To obtain local dealer information, visit the Locator section of our website, subzero.com.
Perhaps no other model is more visible or recognizable for Sub-Zero than the Model 632. This 48" (1219) combination refrigerator/freezer is the standard by which all other built-in refrigerators have been compared. It offers you the maximum storage space—nearly
30 cu. ft. (850 L)—nearly nineteen on the refrigerator side and almost ten on the freezer. Beauty and functionality working together for you and your clients.
1
11/06
Planning Information
Built-In Model 632
F E A T U R E S
48" (1219) wide side-by-side refrigerator/ freezer
Framed, overlay and stainless steel applications provide complete design flexibility
Sub-Zero's dual refrigeration system ensures the freshest food and energy efficiency
Shallow-depth design means access is easy to any area of the refrigerator
Electronic digital controls are up front and easy to use
Bright interior lighting
Adjustable, spill-proof glass shelves
High-humidity crisper drawer is large and deep with removable divider and smooth sides for easy cleaning – there are even two added storage drawers
Door alarm will let you know with an audible beeping if your refrigerator or freezer door is left ajar
Automatic ice maker provides an ample supply of crescent-shaped ice
Solid core doors with magnetic gaskets and door closers
Front venting allows unit to be completely built in and serviced from the front
Meets strict Department of Energy requirements
UL approved for US and Canada
Two, five and twelve year residential warranty – exclusions apply; warranty information can be found on our website, subzero.com
O V E R A L L D I M E N S I O N S
|
|
|
|
|
|
|
|
|
471/4" |
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
(1200) |
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
237/8" |
|
|
|
|
|
|
|
|
|
|
3/8" (10) |
|
|
|
|
(606) |
||||||
|
|
|
|
|
|
|
|
|
|
|
BEHIND |
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
FRAME EXTENSION |
|
FRAME |
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
84" |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(2134) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
291/4" |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(743) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
48" |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
(1219) |
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
48" |
|
|
|
|
|
|
|
24" |
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
||
|
|
|
|||||||
(1219) |
|
|
|
|
(610) |
||||
Stainless steel design shown.
Dimensions may vary by ±1/8" (3).
Dimensions in parentheses are in |
|
millimeters unless otherwise specified. |
2 |
Planning Information
Built-In Model 632
M O D E L O P T I O N S
Framed Design |
632/F |
Overlay Design |
632/O |
Classic Stainless Steel |
632/S |
Platinum Stainless Steel |
632/P |
Carbon Stainless Steel |
632/B |
You must allow 90 days from order to delivery for platinum and carbon finishes.
A C C E S S O R I E S
Louvered, panel or stainless steel grilles in 1" (25) increments from 10" (254) to 15" (381) high
Front and grille panels for framed design in white, almond and classic stainless steel
Side panels in white, almond and classic stainless steel
Extended framed handles
Stainless steel and polished chrome handles for overlay design
Gallon door shelf
Dozen egg container with lid
90˚ and 105˚ door stop kits
Accessories are available through your Sub-Zero dealer. To obtain local dealer information, visit the Locator section of our website, subzero.com.
S P E C I F I C A T I O N S
Model 632 |
Side-by-Side Refrigerator/Freezer |
|
|
|
|
Overall Width |
|
48" (1219) |
|
|
|
Overall Height |
|
84" (2134) |
|
|
|
Overall Depth |
|
24" (610) |
|
|
|
Refrigerator Capacity |
|
18.9 cu ft (535 L) |
|
|
|
Freezer Capacity |
|
9.8 cu ft (278 L) |
|
|
|
Minimum Height (levelers in) |
83" (2108) |
|
|
|
|
Door Swing Clearance |
|
291/4" (743) |
Electrical Requirements |
115 V AC, 60 Hz, 15 amp circuit |
|
|
|
|
Plumbing Requirements |
|
1/4" copper line |
Water Supply |
|
20–100 psi |
|
|
|
Annual Energy Usage |
|
675 kWh / $62 |
(based on 9.06 cents per kilowatt hour) |
||
|
|
|
Shipping Weight |
|
Framed – 582 lbs (264 kg) |
|
|
Overlay – 582 lbs (264 kg) |
|
Stainless Steel – 630 lbs (286 kg) |
|
|
|
|
Specifications are subject to change without notice.
Dimensions in parentheses are in |
|
millimeters unless otherwise specified. |
3 |
Planning Information
Built-In Model 632
I N S T A L L A T I O N S P E C I F I C A T I O N S |
|
24" |
EXTEND WATER LINE |
(610) |
APPROX. 36" (914) |
ROUGH |
FROM BACK WALL |
OPENING |
|
DEPTH |
|
|
SHUT-OFF |
|
VALVE |
|
TOP VIEW |
|
7" |
E |
|
(178) |
|
|
|
|
|
|
6" |
|
(152) |
|
LOCATE ELECTRICAL |
|
|
WITHIN SHADED AREA |
|
|
471/2" |
|
|
(1207) |
|
|
ROUGH OPENING WIDTH |
|
|
833/4" |
|
751/2" |
(2127) |
|
(1918) |
ROUGH |
|
|
OPENING |
|
|
HEIGHT |
|
|
WITH |
|
|
STANDARD |
|
|
11" (279) |
|
|
GRILLE |
|
|
LOCATE WATER SUPPLY |
|
|
WITHIN SHADED AREA |
|
|
3" |
|
|
(76) |
|
6" |
18" |
|
|
(457) |
(152) |
|
W |
|
|
FRONT VIEW
D I M E N S I O N S
Finished Rough Opening Width |
471/2" (1207) |
Finished Rough Opening Height |
833/4" (2127) |
Finished Rough Opening Depth |
24" (610) |
|
|
Location of Electrical |
Within upper shaded area |
|
|
Location of Water Supply |
Within lower shaded area |
|
|
See Installation Instructions shipped with unit for detailed specifications.
Refer to the Sub-Zero Design Guide pdf file for additional specifications.
Dimensions in parentheses are in |
|
millimeters unless otherwise specified. |
4 |
Planning Information
Built-In Model 632
I N S T A L L A T I O N N O T E S
Refer to the illustrations and specifications for overall dimensions, finished rough opening dimensions and installation specifics.
Allow the doors to open a minimum of 90˚ or you'll have problems removing drawers. With the doors opening at 90˚, you may have to move drawers slightly to clear the door interior. Refer to the minimum door swing clearances in the specifications chart.
For corner installations, allow for a minimum 3" (76) filler so that the door can open to 90˚. If you're using raised panels, consider using a wider filler. A 90˚ door stop is available as an accessory.
Be sure to add the filler strip width to your finished rough opening dimension. In any side- by-side installation without a filler strip, add an additional 1/2" (13) to your combined numbers. This will allow for the proper width.
Refer to the full-scale illustrations at the end of this section for specifics on door openings and filler size alternatives.
If your client has chosen the stainless steel design, the unit will be shipped complete with wrapped stainless steel doors and handle hardware. You will not have to install front panels.
If your client has chosen the framed or overlay design, you will be adding front panels to give the unit the custom Sub-Zero look. The overlay design also allows you to add your own handles, or you may choose accessory handles available through your Sub-Zero dealer. Refer to pages 6–10 for detailed information on adding panels.
For Built-In models with an automatic ice maker, rough in the water supply line. Connect a 1/4" OD copper line to the house supply, being sure to use an easily accessible shut off valve between the supply and the unit.
Do not use self-piercing valves. A saddle valve kit (4200880) is available from your Sub-Zero dealer. To obtain local dealer information, visit the Locator section of our website, subzero.com.
A line filter is required when water conditions have a high sediment content. The ice maker operates on water pressure of 20 psi (1.4 bar) to 100 psi (6.9 bar). In some cases a reverse osmosis water filter system may not be able to maintain the minimum water pressure consistently.
The water line should be routed up through the floor within 1/2" (13) from the back wall and no higher than 3" (76) off the floor. If you have to come through the wall, make sure the water line is no more than 3" (76) from the floor.
Locate water supply within the shaded area shown in the installation illustration.
Regardless of the routing, allow 3' (.9 m) of excess copper tubing to remain outside the wall or floor for easy connection to the unit.
A 115 volt, 60 Hz, 15 amp electrical supply is required. The supply circuit for this appliance must be protected by a 15 amp fuse or circuit breaker. It is recommended that a separate circuit, serving only this appliance, be provided.
All Built-In models are equipped with a 6' (1.8 m) power supply cord with a 3-prong grounding plug which must be plugged into a mating 3-prong grounding type wall receptacle. Locate electrical within the shaded area shown in the installation illustration.
You must follow all National Electrical Code regulations. In addition, be aware of local codes and ordinances when installing your service.
To prevent the unit from tipping forward and provide a stable installation, the unit must be secured in place with an anti-tip blocking kit. If there is a solid soffit above the unit with clearance between the unit and the soffit of 1" (25) or less, you won't need to block the unit.
For installations with clearances of more than 1" (25), you must block the unit with the anti-tip blocking kit (wood block and hardware) provided with each Built-In unit.
Refer to the Built-In Installation Instructions packed with the appliance, which provides step-by-step procedures for making sure the unit is installed properly.
Dimensions in parentheses are in
millimeters unless otherwise specified. |
5 |
Loading...