Planning Information
Built-In Model 601F
All Freezer
|
|
|
Lighted electronic |
Serial and model |
|
|
|
||
|
|
|
||
|
|
|
control panel |
number plate |
|
|
|
|
Adjustable wire |
Adjustable door |
|
shelves |
shelves |
Model 601F/F |
|
|
Framed |
|
|
|
Automatic ice |
|
|
maker |
|
|
Pull-out ice |
Four-sided |
|
container |
magnetic gaskets |
|
Roll-out storage |
Door closers |
Model 601F/O |
baskets |
|
|
|
|
Overlay |
|
|
|
Hermetically sealed |
|
|
refrigeration units |
Front venting allows unit |
|
|
|
|
|
to be completely built in |
|
Removable kickplate |
|
|
|
(Stainless steel design shown) |
Model 601F/S (P/B)
Stainless Steel
The Sub-Zero Model 601F all freezer is available in your choice of the framed,
overlay or stainless steel design application. Three stainless steel finishes are offered— classic (/S), platinum (/P) and carbon (/B).
With the installation of a harness kit, these appliances are Star-K compliant to meet strict religious regulations in conjunction with specific instructions found on star-k.org. You may purchase this harness kit through your Sub-Zero dealer.
To obtain local dealer information, visit the Locator section of our website, subzero.com.
Combined with the Model 601R or 601RG this popular all freezer model strikes a handsome pose. This combination is formidable and no one else in the market can boast the performance these two offer. The automatic ice maker has a large storage drawer for easy access to the crescent-shaped ice.
Dimensions in parentheses are in |
|
millimeters unless otherwise specified. |
1 |
11/06
Planning Information
Built-In Model 601F
F E A T U R E S
36" (914) wide all freezer
Sub-Zero's refrigeration system ensures the best storage and energy efficiency
Shallow-depth design means access is easy to any area of the freezer
Electronic digital controls are up front and easy to use
Bright interior lighting
Adjustable wire shelves
Door alarm will let you know with an audible beeping if your freezer door is left ajar
Automatic ice maker provides an ample supply of crescent-shaped ice
Front venting allows unit to be completely built in and serviced from the front
Meets strict Department of Energy requirements
UL approved for US and Canada
Two, five and twelve year residential warranty – exclusions apply; warranty information can be found on our website, subzero.com
O V E R A L L D I M E N S I O N S
|
|
|
|
|
|
|
|
|
|
351/4" |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(895) |
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3/8" (10) |
|
|
|
237/8" |
|||||
|
|
|
|
|
|
|
|
|
|
(606) |
||||||
|
|
|
|
|
|
|
|
|
|
FRAME |
|
|
BEHIND |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
EXTENSION |
|
|
FRAME |
||||
73" |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
(1854) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
361/16" |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(916) |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
36" |
|
|
|
|
|
|
|
24" |
|
|
|
|
36" |
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
||||
(914) |
|
|
|
|
(610) |
|
(914) |
||||||
Stainless steel design shown.
Dimensions may vary by ±1/8" (3).
Dimensions in parentheses are in |
|
millimeters unless otherwise specified. |
2 |
Planning Information
Built-In Model 601F
M O D E L O P T I O N S
Framed Design |
601F/F |
Overlay Design |
601F/O |
Classic Stainless Steel |
601F/S |
Platinum Stainless Steel |
601F/P |
Carbon Stainless Steel |
601F/B |
You must allow 90 days from order to delivery for platinum and carbon finishes.
A C C E S S O R I E S
Front panels for framed design in white, almond and classic stainless steel
Side panels in white, almond and classic stainless steel
Extended framed handle
Stainless steel and polished chrome handles for overlay design
90˚ and 105˚ door stop kits
Accessories are available through your Sub-Zero dealer. To obtain local dealer information, visit the Locator section of our website, subzero.com.
S P E C I F I C A T I O N S
Model 601F |
|
All Freezer |
|
|
|
Overall Width |
|
36" (914) |
|
|
|
Overall Height |
|
73" (1854) |
|
|
|
Overall Depth |
|
24" (610) |
|
|
|
Freezer Capacity |
|
19.3 cu ft (547 L) |
|
|
|
Minimum Height (levelers in) |
723/4" (1848) |
|
Door Swing Clearance |
|
361/16" (916) |
Electrical Requirements |
115 V AC, 60 Hz, 15 amp circuit |
|
|
|
|
Plumbing Requirements |
|
1/4" copper line |
Water Supply |
|
20–100 psi |
|
|
|
Annual Energy Usage |
|
737 kWh / $67 |
(based on 9.06 cents per kilowatt hour) |
||
|
|
|
Shipping Weight |
|
Framed – 378 lbs (171 kg) |
|
|
Overlay – 378 lbs (171 kg) |
|
Stainless Steel – 406 lbs (184 kg) |
|
|
|
|
Specifications are subject to change without notice.
Dimensions in parentheses are in |
|
millimeters unless otherwise specified. |
3 |
Planning Information
Built-In Model 601F
I N S T A L L A T I O N S P E C I F I C A T I O N S
24" |
EXTEND WATER LINE |
(610)APPROX. 36" (914)
ROUGH |
FROM BACK WALL |
OPENING
DEPTH
SHUT-OFF
VALVE
TOP VIEW
|
351/2" |
|
|
(902) |
|
|
ROUGH OPENING WIDTH |
|
723/4" |
|
|
(1848) |
|
|
ROUGH |
|
|
OPENING |
|
|
HEIGHT |
|
|
|
LOCATE ELECTRICAL |
|
WITHIN ENTIRE SHADED AREA |
||
|
LOCATE WATER SUPPLY |
|
|
WITHIN BOTTOM SHADED |
|
|
AREA ONLY |
|
|
24" |
6" |
|
(610) |
(152) |
|
|
3" |
11" |
E |
(76) |
|
||
(279) |
|
|
|
W |
|
FRONT VIEW
D I M E N S I O N S
Finished Rough Opening Width |
351/2" |
(902) |
Finished Rough Opening Height |
723/4" (1848) |
|
Finished Rough Opening Depth |
24" |
(610) |
|
|
|
Location of Electrical |
Within entire shaded area |
|
|
|
|
Location of Water Supply |
Within lower shaded area |
|
|
|
|
See Installation Instructions shipped with unit for detailed specifications.
Refer to the Sub-Zero Design Guide pdf file for additional specifications.
Dimensions in parentheses are in |
|
millimeters unless otherwise specified. |
4 |
Planning Information
Built-In Model 601F
I N S T A L L A T I O N N O T E S
Refer to the illustrations and specifications for overall dimensions, finished rough opening dimensions and installation specifics.
Allow the door to open a minimum of 90˚ or you'll have problems removing drawers. With the door opening at 90˚, you may have to move drawers slightly to clear the door interior. Refer to the minimum door swing clearance in the specifications chart.
For corner installations, allow for a minimum 3" (76) filler so that the door can open to 90˚. If you're using raised panels, consider using a wider filler. A 90˚ door stop is available as an accessory.
When units are installed side by side, a filler strip is recommended. The width of this filler strip will vary depending on the configuration and panels you use. An anchoring kit may also be used to attach two units together. This kit is available through your Sub-Zero dealer.
Be sure to add the filler strip width to your finished rough opening dimension. In any side- by-side installation without a filler strip, add an additional 1/2" (13) to your combined numbers. This will allow for the proper width.
Refer to the full-scale illustrations at the end of this section for specifics on door openings and filler size alternatives.
If your client has chosen the stainless steel design, the unit will be shipped complete with wrapped stainless steel doors and handle hardware. You will not have to install front panels.
If your client has chosen the framed or overlay design, you will be adding front panels to give the unit the custom Sub-Zero look. The overlay design also allows you to add your own handles, or you may choose accessory handles available through your Sub-Zero dealer. Refer to pages 6–10 for detailed information on adding panels.
For Built-In models with an automatic ice maker, rough in the water supply line. Connect a 1/4" OD copper line to the house supply, being sure to use an easily accessible shut off valve between the supply and the unit.
Dimensions in parentheses are in
Do not use self-piercing valves. A saddle valve kit (4200880) is available from your Sub-Zero dealer. To obtain local dealer information, visit the Locator section of our website, subzero.com.
A line filter is required when water conditions have a high sediment content. The ice maker operates on water pressure of 20 psi (1.4 bar) to 100 psi (6.9 bar). In some cases a reverse osmosis water filter system may not be able to maintain the minimum water pressure consistently.
The water line should be routed up through the floor within 1/2" (13) from the back wall and no higher than 3" (76) off the floor. If you have to come through the wall, make sure the water line is no more than 3" (76) from the floor.
Locate water supply within the lower shaded area shown in the installation
illustration.
Regardless of the routing, allow 3' (.9 m) of excess copper tubing to remain outside the wall or floor for easy connection to the unit.
A 115 volt, 60 Hz, 15 amp electrical supply is required. The supply circuit for this appliance must be protected by a 15 amp fuse or circuit breaker. It is recommended that a separate circuit, serving only this appliance, be provided.
All Built-In models are equipped with a 6' (1.8 m) power supply cord with a 3-prong grounding plug which must be plugged into a mating 3-prong grounding type wall receptacle. Locate electrical within the shaded area shown in the installation illustration.
You must follow all National Electrical Code regulations. In addition, be aware of local codes and ordinances when installing your service.
To prevent the unit from tipping forward and provide a stable installation, the unit must be secured in place with an anti-tip blocking kit. If there is a solid soffit above the unit with clearance between the unit and the soffit of 1" (25) or less, you won't need to block the unit.
For installations with clearances of more than 1" (25), you must block the unit with the anti-tip blocking kit (wood block and hardware) provided with each Built-In unit.
Refer to the Built-In Installation Instructions packed with the appliance, which provides step-by-step procedures for making sure the unit is installed properly.
millimeters unless otherwise specified. |
5 |
Loading...