Southbend KELT-40, KELT-60, KELT-30, KELT-100, KELT-20 User Manual

...
0 (0)
Southbend KELT-40, KELT-60, KELT-30, KELT-100, KELT-20 User Manual

ELECTRIC STEAM

TILTING KETTLE

*Kettle shown with Optional Spring Assist Cover

SPECIFICATIONS:

Shall be a Model__________________________________ , self-generating, electric tilting kettle. A double wall kettle interior shall form a steam jacket around the lower 2/3 of the kettle. The jacket enclosure shall contain distilled water which is factory sealed. The bottom of the kettle shall be of hemispherical design for superior heat circulation.

The console shall be drip proof, stainless steel clad and shall be supported on all welded, 1-5/8" (41mm) diameter stainless steel frame and legs fitted with 4 hole adjustable flanged feet for securing to floor.

The kettle shall pivot on trunnions connected to the tilt mechanism and the outbore bearing connected to the frame and shall permit the kettle to tilt forward a full 90 for complete emptying. The tilt mechanism shall be self locking for positive stop action.

Construction shall be all welded #4 finish stainless steel, type 304. The controls shall be integrally mounted and shall include a power switch, thermostat, pilot light, low water light, vacuum/ pressure gauge, safety relief valve, and low water shut off.

The kettle shall be standard with removable elements.

The kettle shall operate in a temperature range of 100°F to 290°F (38°C to 144°C) at a maximum pressure of 50 psi

(345kPa).

MODEL

 

CAPACITY

KELT-20

20 Gallon

76 Liter

 

 

 

KELT-30

30 Gallon

114 Liter

 

 

 

KELT-40

40 Gallon

152 Liter

 

 

 

KELT-60

60 Gallon

227 Liter

 

 

 

KELT-80

80 Gallon

303 Liter

 

 

 

KELT-100

100 Gallon

379 Liter

 

 

 

OPERATION SHALL BE BY:

Electrically, self-generating closed steam system operating at 50 psi equipped for operation on:

208 VAC, 3 Phase, 50/60 Hz

208 VAC, 1 Phase, 50/60 Hz*

240 VAC, 3 Phase, 50/60 Hz

240 VAC, 1 Phase, 50/60 Hz*

OPTIONAL ITEMS AT EXTRA COST:

Type 316 stainless steel liner for high acid content products

1-1/2" (38 mm) draw off valve

2" (50 mm) draw off valve

3" (76 mm) draw off valve

2" (50 mm) dairy valve

3" (76 mm) dairy valve

24 kw on 40, 60, 80 gallon

33 kw on 60, 80, 100 gallon

220 VAC, 1 Phase, 50/60 Hz*

220 VAC, 3 Phase, 50/60 Hz

380 VAC, 3 Phase, 50/60 Hz

415 VAC, 3 Phase, 50/60 Hz

480 VAC, 3 Phase, 50/60 Hz

220/380 VAC, 3 Phase, 4 wire

240/415 VAC, 3 Phase, 4 wire

One piece lift off stainless steel cover

Spring assist hinged stainless steel cover

Etched gallon markings

Etched litre markings

Correctional package *20 and 30 gallon only

ACCESSORIES:

ˆTriple basket assembly

ˆPerforated strainer for draw off

ˆSolid stainless steel disc for draw off valve

ˆGraduated measuring stick

ˆStrainer hook

ˆDouble pantry faucet with swing spout

ˆSingle pantry faucet with swing spout

ˆPan support

ˆPour strainer

ˆCalibrated thermostat dial “C”

ˆCalibrated thermostat dial “F”

Job

Item#

Form KELT Rev 0 (01/07)

Printed in USA

Loading...
+ 1 hidden pages