Sony US2-697-099-11 (1), KLV-23S200A, KLV-32, KLV-40S200A, KLV-26S200A User Manual

2-697-099-11(1)

KLV-23S200A

KLV-26S200A

KLV-32S200A

KLV-40S200A

Quick Setup Guide

For further information, see the operating instruction supplied with the TV. Please retain this guide for your future reference.

Upgrade your signal to high-definition programming to view the same picture quality at home as you've seen in the store. Contact your cable or satellite provider for upgrading to high-definition TV for stunning detail and richer sound.

For Your Convenience

Please contact Sony directly if you have questions on the use of your television after reading your Quick Setup Guide and manual.

Contact Sony Customer Support at:

http://www.sony.com/tvsupport

or to speak with a support representative: Canada

1-877-899-SONY (7669)

8:00 AM - 6:00 PM (Eastern)

8:00 AM - 5:00 PM (Western)

Please Do Not Return the Product to the Store

Sony Corporation © 2006 Printed in Mexico

A

Cables Required

Use this diagram if you have;

Splitter

1

Coaxial

3

VCR

DVD

PC

Player

Composite

1

Component

1

Audio

2

HD15-HD15

1

If your DVD player has an HDMI jack, use that instead of the video connections shown here.

Making Audio/Video Connections

Your new TV includes various types of video inputs and analog audio jacks.

Use the outputs/inputs that are available on your components that provide the best audio/video performances:

Connector type

Analog Audio

Best Audio/Video

Performance

Connector type

HDMI (High-Definition

Multimedia Interface)

DVI (Digital Visual Interface)

Will require an adapter to connect to this TV.

Component video

S VIDEO

Composite video

The connection diagrams shown below and on the reverse side are recommendations only; other possible solutions may exist. Connections that include an AV receiver can often be complex, so check your AV receiver’s instruction manual for additional details.

See the “Cables Required” chart that appears with the diagram to determine which cables you’ll need. Depending on the components you plan to connect, you may need to purchase extra cables.

Running Initial Setup

1 Press POWER to turn on the TV.	Initial Setup
		Please select your language
The Initial Setup screen appears.
		English

Español

2 Press V/v to highlight the on-screen display Français

language. Then press .

The message “First please connect cable/

antenna. Do you want to start Auto Program?” appears.

	3 Press B/b to highlight “OK” then press .
		Auto Program
		Programmed Channel: 10

4 When Initial Setup is complete, the TV will

Now tuning

display the Channel Setup menu.

To run Auto Program again at a later time

Refer to the manual on “Initial Setup” and “Auto Program” sections.

B
						Cables Required
Use this diagram if you have;						Splitter	1
						Coaxial	4

Cable Box	VCR	DVD	PC	AV Receiver	Composite	2
		Player			Component	1
or

Satellite Receiver

Audio

3

HD15-HD15

1

Optical Audio

1

If your DVD player or satellite receiver has an

If you are not using a cable box or

HDMI jack, use that instead of the video

satellite receiver, connect your cable to

connections shown here.

the VCR’s RF IN jack.

7	6
RGB
	R	AUDIO	L
AUDIO
PC IN
VIDEO IN		HD/DVD IN
		(1080i/720p/480p/480i)
1 S VIDEO	3	4	5
		Y
		PB
VIDEO		PR	AUDIO OUT(VAR/FIX)
L		L
(MONO)
AUDIO		AUDIO
R		R

Continued,