Sony RDR-HX980, RDR-HX680, 3-293-880-11-1 User Manual

0 (0)

3-293-880-11(1)

DVD Recorder

Operating Instructions

To find out useful hints, tips and information about Sony products and services please visit: www.sony-europe.com/myproduct

RDR-HX680/HX780/HX980

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

The mains lead must be changed only at a qualified service shop. Batteries or batteries installed apparatus shall not be exposed to excessive heat such as sunshine, fire or the like.

This appliance is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT MARKING is located on the rear of the unit.

CAUTION

The use of optical instruments with this product will increase eye hazard. As the laser beam used in this DVD recorder is harmful to eyes, do not attempt to disassemble the cabinet.

Refer servicing to qualified personnel only.

This label is located on the laser protective housing inside the enclosure.

Notice for customers in the United Kingdom and Republic of Ireland

A molded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS1362, (i.e., marked with

or mark) must be used. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.

Precautions

•This unit operates on 220 – 240 V AC, 50/60 Hz. Check that the unit’s operating voltage is identical with your local power supply.

•To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus.

•Install this system so that the mains lead can be unplugged from the wall socket immediately in the event of trouble.

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems)

This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste.

By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources.

In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only.

To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment.

For all other batteries, please view the section on how to remove the battery from the product safely.

Hand the battery over to the applicable collection point for the recycling of waste batteries.

For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.

Precautions

This equipment has been tested and found to comply with the limits set out in the EMC Directive using a connection cable shorter than 3 metres.

On safety

Should any solid object or liquid fall into the cabinet, unplug the recorder and have it checked by qualified personnel before operating it any further.

About the hard disk drive

The hard disk has a high storage density, which enables long recording durations and quick access to the written data. However, it can easily be damaged by shock, vibration or dust, and should be kept away from magnets. To avoid losing important data, observe the following precautions.

•Do not apply a strong shock to the recorder.

•Do not place the recorder in a location subject to mechanical vibrations or in an unstable location.

•Do not place the recorder on top of a hot surface, such as a VCR or amplifier (receiver).

•Do not use the recorder in a place subject to extreme changes in temperature (temperature gradient less than 10 °C/hour).

•Do not move the recorder with its mains lead connected.

•Do not disconnect the mains lead while the power is on.

•When disconnecting the mains lead, turn off the power and make sure that the hard disk drive is not operating (the clock is displayed in the front panel display for at least 30 seconds and all recording or dubbing has stopped).

•Do not move the recorder for one minute after you have unplugged the mains lead.

,continued 3

•Do not attempt to replace or upgrade the hard disk by yourself, as this may result in malfunction.

If the hard disk drive should malfunction, you cannot recover lost data. The hard disk drive is only a temporary storage space.

About repairing the hard disk drive

•The contents of the hard disk drive may be checked in case of repair or inspection during a malfunction or modification. However, the contents will not be backed up or saved by Sony.

•If the hard disk needs to be formatted or replaced, it will be done at the discretion of Sony. All contents of the hard disk drive will be erased, including contents that violate copyright laws.

On power sources

•The recorder is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the recorder itself has been turned off.

•If you are not going to use the recorder for a long time, be sure to disconnect the recorder from the wall outlet. To disconnect the AC power cord (mains lead), grasp the plug itself; never pull the cord.

On placement

•Place the recorder in a location with adequate ventilation to prevent heat build-up in the recorder.

•Do not place the recorder on a soft surface such as a rug that might block the ventilation holes.

•Do not place the recorder in a confined space such as a bookshelf or similar unit.

•Do not place the recorder in a location near heat sources, or in a place subject to direct sunlight, excessive dust, or mechanical shock.

•Do not place the recorder in an inclined position. It is designed to be operated in a horizontal position only.

•Keep the recorder and discs away from equipment with strong magnets, such as microwave ovens, or large loudspeakers.

•Do not place heavy objects on the recorder.

On recording

Make trial recordings before making the actual recording.

On compensation for lost recordings

Sony is not liable and will not compensate for any lost recordings or relevant losses, including when recordings are not made due to reasons including recorder failure, or when the contents of a recording are lost or damaged as a result of recorder failure or repair undertaken to the recorder. Sony will not restore, recover, or replicate the recorded contents under any circumstances.

Copyrights

•Television programmes, films, video tapes, discs, and other materials may be copyrighted. Unauthorized recording of such material may be contrary to the provisions of the copyright laws. Also, use of this recorder with cable television transmission may require authorization from the cable television transmitter and/or programme owner.

•This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

•This Product includes FontAvenue® fonts licenced by NEC corporation. FontAvenue is a registered trademark of NEC corporation.

•“” and x-Application are trademarks of Sony Corporation.

Copy guard function

Since the recorder has a copy guard function, programmes received through an external tuner (not supplied) may contain copy protection signals (copy guard function) and as such may not be recordable, depending on the type of signal.

IMPORTANT NOTICE

Caution: This recorder is capable of holding a still video image or on-screen display image on your television screen indefinitely. If you leave the still video image or onscreen display image displayed on your TV for an extended period of time you risk permanent damage to your television screen. Plasma display panels and projection televisions are especially susceptible to this.

If you have any questions or problems concerning your recorder, please consult your nearest Sony dealer.

About this manual

Check your model name

The instructions in this manual are for 3 models: RDR-HX680, RDR-HX780, and RDR-HX980. Check your model name by looking at the front panel of the recorder.

•In this manual, the internal hard disk drive is written as “HDD,” and “disc” is used as a general reference for the HDD, DVDs, or CDs unless

otherwise specified by the text or illustrations.

• Icons, such as DVD , listed at the top of each explanation indicate what kind of media can be used with the function being explained. For details, see “Recordable and Playable Discs” on page 125.

•Instructions in this manual describe the controls on the remote. You can also use the controls on the recorder if they have the same or similar names as those on the remote.

•The on-screen display illustrations used in this manual may not match the graphics displayed on your TV screen.

•The explanations regarding DVDs in this manual refer to DVDs created on this recorder. The explanations do not apply to DVDs that are created on other recorders and played back on this recorder.

Table of Contents

WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Guide to Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Hookups and Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Hooking Up the Recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Step 1: Connecting the Aerial Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Step 2: Connecting the Video Cords/HDMI Cord . . . . . . . . . . . . . . . . . . . . 17 About the SMARTLINK features (for SCART connections only). . . . . . 19

About the “Control for HDMI” functions for ‘BRAVIA’ Sync

(for HDMI connections only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Step 3: Connecting the Audio Cords/HDMI Cord . . . . . . . . . . . . . . . . . . . . 20 Step 4: Connecting the Mains Lead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Step 5: Preparing the Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Controlling TVs with the remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

If you have a Sony DVD player or more than one Sony DVD

recorder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Changing programme positions of the recorder using the remote . . . . 23 Step 6: Easy Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Connecting a VCR or Similar Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Connecting to the LINE 1/DECODER jack . . . . . . . . . . . . . . . . . . . . . . 26 Connecting to the LINE 2 IN jacks on the front panel . . . . . . . . . . . . . . 27 Connecting to a Satellite or Digital Tuner . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Connecting an External Decoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Connecting a decoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Setting external decoder (PAY-TV/Canal Plus analogue decoder) programme positions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Seven Basic Operations — Getting to Know Your DVD Recorder
1.	Inserting a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	31
2.	Recording a Programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	31
	Checking the disc status while recording . . . . . . . . . . . . . . . . . . . . . . .	33
3.	Playing the Recorded Programme (Title List) . . . . . . . . . . . . . . . . . . . .	33
	Displaying the playing time and play information . . . . . . . . . . . . . . . . .	36
4.	Changing the Name of a Recorded Programme . . . . . . . . . . . . . . . . . .	37
5.	Labelling and Protecting a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	38
	Labelling a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	38
	Protecting a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	38
6.	Playing the Disc on Other DVD Equipment (Finalise) . . . . . . . . . . . . . .	39
	Unfinalising a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	41
7.	Reformatting a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	42

Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Using the Quick Timer function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Recording stereo and bilingual programmes . . . . . . . . . . . . . . . . . . . . 45 Creating chapters in a title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Checking/Changing/Cancelling Timer Settings (Timer List) . . . . . . . . . . . . 46 Recording from Connected Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Recording from connected equipment with a timer (Synchro Rec.) . . . 47 Recording from connected equipment without a timer . . . . . . . . . . . . . 48

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Playback options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Playing a specific portion repeatedly (A-B Repeat). . . . . . . . . . . . . . . . 53 Playing repeatedly (Repeat) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Creating your own programme (Programme) . . . . . . . . . . . . . . . . . . . . 54

Advanced Playback Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Pausing a TV broadcast (TV Pause/Pause Live TV) . . . . . . . . . . . . . . 55 Playing from the beginning of the programme you are recording

(Chase Play) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Playing a previous recording while making another

(Simultaneous Rec and Play) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Searching for a Time/Title/Chapter/Track, etc. . . . . . . . . . . . . . . . . . . . . . 56

Erasing and Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Before Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Erasing and Editing a Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Editing multiple titles (Multi-Mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Erasing a section of a title (A-B Erase) . . . . . . . . . . . . . . . . . . . . . . . . . 60 Dividing a title (Divide) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Erasing and Editing a Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Dividing a chapter (Divide) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Erasing a chapter (Erase) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Combining multiple chapters (Combine) . . . . . . . . . . . . . . . . . . . . . . . . 62 Creating and Editing a Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Moving a Playlist title (Move) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Combining multiple Playlist titles (Combine) . . . . . . . . . . . . . . . . . . . . . 63 Dividing a Playlist title (Divide) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Moving a chapter (Move) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Dubbing (HDD y DVD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

Before Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

HDD/DVD Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Dubbing Using Dubbing List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Making a Backup Disc (DVD Backup) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

,continued 7

HDD Camcorder Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

Before HDD Camcorder Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Preparing for HDD camcorder dubbing. . . . . . . . . . . . . . . . . . . . . . . . . 71 One-Touch Dubbing from HDD Camcorder (ONE-TOUCH DUB) . . . . . . . 72

Dubbing from HDD Camcorder Using the On-Screen Display

(HDD-Cam Dubbing) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

DV Camcorder Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

Before DV Camcorder Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Preparing for DV camcorder dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Dubbing an Entire DV Format Tape (DV One-Touch Dubbing) . . . . . . . . . 76 Dubbing Selected Scenes (DV Manual Dubbing) . . . . . . . . . . . . . . . . . . . 76 Playing from a DV Camcorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Music Jukebox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

About Jukebox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Preparing for Using Jukebox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Connecting the USB device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Copying tracks or albums (USB t HDD). . . . . . . . . . . . . . . . . . . . . . . 78 Copying audio tracks (DISC t HDD) . . . . . . . . . . . . . . . . . . . . . . . . . 79 Copying tracks or albums on the HDD (HDD y HDD) . . . . . . . . . . . . 79 Playing Audio Tracks Using Jukebox/USB Device . . . . . . . . . . . . . . . . . . 80 Adding audio tracks to a Playlist (HDD only) . . . . . . . . . . . . . . . . . . . . 81 Playback options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Playing repeatedly (Repeat) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Creating your own programme (Programme) (USB device only) . . . . . 82 Managing Audio Tracks on the Music Jukebox (HDD only) . . . . . . . . . . . . 83

Photo Album . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84

About the “Photo Album” Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Preparing for Using the “Photo Album” Function . . . . . . . . . . . . . . . . . . . . 84 Connecting the USB device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Copying JPEG image files to the HDD (DISC/USB t HDD) . . . . . . . . 84

Copying all JPEG image files from the connected USB device

(USB t DVD-RW/DVD-R). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Copying JPEG image files or albums on the HDD (HDD y HDD) . . . 86 Copying JPEG image albums to a disc

(HDD t DVD-RW/DVD-R) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Copying JPEG image files to a disc (HDD t DVD-RW/DVD-R) . . . . . 87 Using the “Photo Album” List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Playing a slideshow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Creating a Slideshow with Your Favourite Music and Graphic Effects

(x-Pict Story) (HDD only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Managing JPEG Image Files on the HDD . . . . . . . . . . . . . . . . . . . . . . . . . 93 Printing JPEG Image Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Settings and Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96

Adjusting Picture Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

Using the Setup Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Disc Settings (Disc Setup) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Recorder Settings (Basic) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

Aerial Reception Settings (Tuner) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Video Settings (Video In/Out) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

Audio Input Settings (Audio In) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

Audio Output Settings (Audio Out) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

Language Settings (Language) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

Recording Settings (Recording) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

Playback Settings (Playback) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

HDMI Settings (HDMI Output) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

Other Settings (Options) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

Other Settings (Options 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 Resetting the Recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 Recordable and Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 About Recording/Dubbing Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 Language Code List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Country/Area Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Notes About This Recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 Notes on MP3 Audio Tracks, JPEG Image Files, DivX Video Files,

and i.Link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137

Guide to Parts and Controls

For more information, see the pages in parentheses.

Remote

1 2 3

4 5 6

7 8 9

AHDD (31)

Records to or plays titles on HDD.

GAUDIO (51)

The AUDIO button has a tactile dot*.

H CLEAR (37, 53, 54)

ITV/DVD (22)

Switches between TV mode and DVD mode.

JSUBTITLE (51)

Selects a subtitle language.

ANGLE (51, 90)

Changes the angles or rotates an image during slideshow.

PLAY MODE (53, 56)

ZOOM (90)

Zooms an image during a slideshow.

KSYSTEM MENU (96) TITLE LIST (33, 49, 59) TIMER (43)

LTOP MENU (49)

MENU (49)

Displays the disc’s menu.

</M/m/,/ENTER (24)

Selects a desired item.

O RETURN (24)

MDISPLAY (36)

Displays the playing status or disc

DVD (31)

Records to or plays titles on DVD.

B[/1 (on/standby) (24)

Turns the recorder on or off.

CZ (open/close) (31)

Opens or closes the disc tray.

DPROG (programme) +/– (31)

The + button has a tactile dot*.

ENumber buttons (56)

The number 5 button has a tactile dot*.

FINPUT (input select) (47)

Selects an input source.

information.

N./> (previous/next) (51,

81)

/ (instant replay/instant advance) (51)

mc/CM (search/ slow/freeze frame) (51, 81)

H (play) (49, 90)

X (pause) (32, 51, 81, 90)

x (stop) (49, 80, 90)

The H button has a tactile dot*.

O TV PAUSE (55)

Pz REC (31)

x REC STOP (31)

HDD/DVD DUB (66)

Starts dubbing the current playing title or cancels the dubbing.

REC MODE (31)

Selects the recording mode.

QTV [/1 (on/standby) (22) TV t (input select) (22) TV 2 (volume) +/– (22)

TV PROG (programme) +/– (22)

The + button has a tactile dot*.

*Use the tactile dot as a reference when operating the recorder.

,continued 11

Front panel

A[/1 (on/standby) (24)

Turns the recorder on or off.

B (remote sensor) (22)

C Disc tray (31)

D Front panel display (13)

EZ (open/close) (31)

Opens or closes the disc tray.

FN (play) (49, 90)

The N button has a tactile dot*.

G x (stop) (49, 80, 90)

H z REC (31)

IHDD (31)

Records to or plays titles on HDD. The HDD indicator lights up when the HDD is selected.

DVD (31)

Records to or plays titles on DVD. The DVD indicator lights up when the DVD is selected.

J x REC STOP (31)

KPROGRAM +/– (31)

The + button has a tactile dot*.

LINPUT (input select) (47)

Selects an input source.

MLINE 2 IN (S VIDEO/VIDEO/ L(MONO) AUDIO R) jacks (27)

Connect a VCR or similar recording device to these jacks.

NONE-TOUCH DUB (72, 76)

Starts dubbing from a connected digital video camera.

O DV IN jack (74)

Connect a DV camcorder to this jack.

P USB jack (type A) (78, 84)

Connect a USB device to this jack.

QPictBridge USB jack (type B) (94)

Connect a PictBridge-compatible printer to this jack.

*Use the tactile dot as a reference when operating the recorder.

To lock the recorder (Child Lock)

You can lock all of the buttons on the recorder so that the settings are not cancelled by mistake.

When the recorder is turned off, hold down x (stop) on the recorder until “LOCKED” appears in the front panel display. The recorder does not work except for timer recordings and Synchro-Recording while the Child Lock is set.

To unlock the recorder, hold down x (stop) on the recorder until “UNLOCKED” appears in the front panel display.

Front panel display

ASYNCHRO REC indicator (47)

Lights up when the recorder is set to stand by for Synchro-Recording.

BDisplays the following:

•Playing time

•Current title/chapter/track/index number

•Recording time/recording mode

•Clock

•Programme position

•TV Direct Rec. indication (31) “TV” appears in the right most two digits.

CNTSC indicator (101, 106)

Lights up when NTSC colour system is selected.

D VPS/PDC indicator (44)

ETimer indicator (43)

Lights up when the timer for recording is set.

FDisc type

Lights up when a recordable DVD-R or DVD-RW disc is loaded.

GCommand Mode indicator (115)

Displays the Command Mode of the remote.

When the Command Mode for the recorder is set to “3 (Default setting),” either “1” or “2” does not appear.

H Recording status

I Dubbing direction indicator

J Playing status

,continued 13

Rear panel

A AERIAL IN/OUT jacks (16)

BLINE 2 OUT (R-AUDIO-L/VIDEO) jacks (17, 20)

C LINE 1/DECODER jack (26)

DHDMI OUT (high-definition multimedia interface out) jack (17, 20)

EDIGITAL OUT (COAXIAL) jack (20)

F AC IN terminal (21)

G LINE 3 – TV jack (17)

H LINE 2 OUT (S VIDEO) jack (17)

ICOMPONENT VIDEO OUT (Y, PB/CB, PR/CR) jacks (17)

Hookups and Settings

Hooking Up the Recorder

Follow steps 1 through 6 to hook up and adjust the settings of the recorder. Do not connect the mains lead until you reach “Step 4: Connecting the Mains Lead” on page 21.

b Notes

•See “Specifications” (page 136) for a list of supplied accessories.

•Plug in cords securely to prevent unwanted noise.

•Refer to the instructions supplied with the components to be connected.

•You cannot connect this recorder to a TV that does not have a SCART or video input jack.

•Be sure to disconnect the mains lead of each component before connecting.

Settings and Hookups

Step 1: Connecting the Aerial Cable

Connect the aerial cable by following the steps below.

Wall

to AERIAL IN

DVD recorder

to AERIAL OUT

to aerial input

Aerial cable (supplied)

: Signal flow

1 Disconnect the aerial cable from your TV, and connect it to AERIAL IN on the rear panel of the recorder.

2 Connect AERIAL OUT of the recorder to the aerial input of your TV using the supplied aerial cable.

Sony RDR-HX980, RDR-HX680, 3-293-880-11-1 User Manual

A Hookups andSettings

Step 2: Connecting the Video Cords/HDMI Cord

Select one of the following patterns, A through E, according to the input jack on your TV monitor, projector, or audio component such as an AV amplifier (receiver). This will enable you to view pictures.

	Audio/video
	cord (not
TV, projector, or audio	supplied)
component

to LINE 2 OUT (VIDEO)

SCART cord (not supplied)

(yellow)

to T LINE 3 – TV

					DVD recorder
(green)	(blue)	(red)	to LINE 2 OUT	to HDMI OUT
			(S VIDEO)
to COMPONENT
VIDEO OUT		Component video		S-video cord	HDMI cord
		Component video		S-video cord	HDMI cord
		cord (not supplied)		(not supplied)	(not supplied)
(green)	(blue)	(red)

D	C	E
	TV, projector, or audio
	component	TV, projector, or
	TV, projector, or audio	TV, projector, or
	component	audio component
	: Signal flow

,continued 17

A SCART input jack

When setting “LINE 3 Out” to “S-Video” or “RGB” in the “Video In/Out” setup

(page 105), use a SCART cord that conforms to the selected signal.

B Video input jack

About the SMARTLINK features (for SCART connections only)

If the connected TV (or other connected equipment such as a set top box receiver) complies with SMARTLINK, NexTView Link*3, MEGALOGIC*1, EASYLINK*2, CINEMALINK*2, Q-Link*3, EURO VIEW LINK*4, or T-V LINK*5, you can enjoy the following SMARTLINK features.

•TV Direct Rec. (page 32)

•One-Touch Play (page 50)

•Preset Download

You can download the tuner preset data from your TV to this recorder, and tune the recorder according to that data in “Easy Setup.”

•NexTView Download

You can easily set the timer by using the NexTView Download function on your TV.

To prepare for the SMARTLINK features

Set “LINE 3 Out” to “Video” in the “Video In/Out” setup (page 105) and “SMARTLINK” to “This Recorder Only” in the “Options” setup (page 116).

b Notes

•For correct SMARTLINK connection, you will need a SCART cord that has the full 21 pins. Refer as well to your TV’s instruction manual for this connection.

•Not all TVs respond to the functions above.

*1 “MEGALOGIC” is a registered trademark of Grundig Corporation.

*2 “EASYLINK” and “CINEMALINK” are trademarks of Philips Corporation.

*3 “Q-Link” and “NexTView Link” are trademarks of Panasonic Corporation.

*4 “EURO VIEW LINK” is a trademark of Toshiba Corporation.

*5 “T-V LINK” is a trademark of JVC Corporation.

About the “Control for HDMI” functions for ‘BRAVIA’ Sync (for HDMI connections only)

By connecting Sony components that are compatible with the “Control for HDMI” function with an HDMI cord (not supplied), operation is simplified as below:

•One-Touch Play (page 50)

•System Power-Off

When you turn the TV off using the power button on the TV’s remote, the recorder and components compatible with the “Control for HDMI” function turn off automatically. However, the recorder does not turn off while recording or dubbing even if you turn off the TV.

•‘BRAVIA’ Sync display

You can control the recorder by pressing the SYNC MENU button on the TV’s remote.

b Notes

•Depending on the connected component, the “Control for HDMI” function may not work. Refer to the operating instructions supplied with the component.

•You can use the ‘BRAVIA’ Sync display feature only when the connected TV has the SYNC MENU button. For details on ‘BRAVIA’ Sync, refer to the operating instructions supplied with the TV.

•To use the ‘BRAVIA’ Sync features, set “Control for HDMI” to “On” (default) in the “HDMI Output” setup (page 115).

Settings and Hookups

Step 3: Connecting the Audio Cords/HDMI Cord

Select one of the following patterns, Aor B, according to the input jack on your TV monitor, projector, or audio component such as an AV amplifier (receiver). This will enable you to listen to sound.

[Speakers]		[Speakers]	A
Rear (L)		Rear (R)	A
	Audio component with
Front (L)	a decoder	Front (R)
Front (L)		Front (R)
Centre		Subwoofer

or	to coaxial/HDMI digital input
HDMI cord	Coaxial digital cord
(not supplied)	(not supplied)
to HDMI OUT	to DIGITAL OUT (COAXIAL)

to LINE 2 OUT (R-AUDIO-L)

(white)

(red)

Audio/video cord

(not supplied)

(yellow)*

: Signal flow

* The yellow plug is used for video signals (page 17).

DVD recorder

	INPUT	B
	INPUT
	VIDEO
(yellow)
	L
(white)	AUDIO
	AUDIO
	R
(red)
	TV, projector, or
	audio component

A Digital audio input jack

If your audio component has a Dolby*1 Digital, DTS*2, or MPEG audio decoder and a digital input jack, use this connection. You can enjoy Dolby Digital (5.1ch), DTS (5.1ch), and MPEG audio (5.1ch) surround effects.

If you connect a Sony audio component that is compatible with the “Control for HDMI” function, refer to the operating instructions supplied with the audio component.

B Audio L/R (left/right) input jacks

This connection will use your TV’s or audio component’s two speakers for sound.

z Hint

For correct speaker location, refer to the operating instructions supplied with the connected components.

b Notes

•Do not connect your TV’s audio output jacks to the LINE IN (R-AUDIO-L) jacks at the same time. This will cause unwanted noise to come from your TV’s speakers.

•With connection B, do not connect the LINE IN (R-AUDIO-L) and LINE 2 OUT (R-AUDIO-L) jacks to your TV’s audio output jacks at the same time. This will cause unwanted noise to come from your TV’s speakers.

•With connection A, after you have completed the connection, make the appropriate settings in the “Audio Out” setup (page 107). Otherwise, no sound or a loud noise will come from your speakers.

•When you connect the recorder to an audio component using an HDMI cord, you will need to do one of the following:

–Connect the audio component to the TV with the HDMI cord, or

–Connect the recorder to the TV with a video cord other than HDMI cord (component video cord, S-video cord, or audio/video cord).

Step 4: Connecting the

Mains Lead

Connect the supplied mains lead to the AC IN terminal of the recorder. Then plug the recorder and TV mains leads (AC power cords) into the mains. After you connect the mains lead, you must wait for a short while before operating the recorder.

You can operate the recorder once the front panel display lights up and the recorder enters standby mode.

If you connect additional equipment to this recorder (page 26), be sure to connect the mains lead after all connections are complete.

1 to AC IN

to mains

Settings and Hookups

Step 5: Preparing the

Remote

You can control the recorder using the supplied remote. Insert two R6 (size AA) batteries by matching the 3 and # ends on the batteries to the markings inside the battery compartment. When using the remote, point it at the remote sensor on the recorder.

b Notes

•If the supplied remote interferes with your other Sony DVD recorder or player, change the command mode number for this recorder (page 23).

•Use the batteries correctly to avoid possible leakage and corrosion. Should leakage occur, do not touch the liquid with bare hands. Observe the following:

–Do not use a new battery with an old battery, or batteries of different manufacturers.

–Do not attempt to recharge the batteries.

–If you do not intend to use the remote for an extended period of time, remove the batteries.

–If battery leakage occurs, wipe out any liquid inside the battery compartment, and insert new batteries.

•Do not expose the remote sensor (markedon the front panel) to strong light, such as direct sunlight or a lighting apparatus. The recorder may not respond to the remote.

•When you replace the batteries of the remote, the code number and Command Mode may be reset to the default setting. Set the appropriate code number and Command Mode again.

Controlling TVs with the remote

You can adjust the remote’s signal to control your TV.

b Notes

•Depending on the connected unit, you may not be able to control your TV with some or all of the buttons below.

•If you enter a new code number, the code number previously entered will be erased.

Number buttons

TV/DVD

DISPLAY

TV [/1

TV 2 +/–

TV t

TV PROG +/–

1 Hold down TV [/1 located at the bottom of the remote.

Do not press the [/1 button at the top of the remote.

2 With TV [/1 pressed down, enter the

TV’s manufacturer code using the number buttons.

For instance, to enter “09,” press “0” then “9.” After you enter the last number, release the TV [/1 button.

Code numbers of controllable TVs

If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.

	Manufacturer	Code number
	Sony	01 (default)

	Hitachi	24

	JVC	33

	LG/Goldstar	76

	Panasonic	17, 49

	Philips	06, 08, 72

	Samsung	71

	Sharp	29

	Toshiba	38

	The remote performs the following:

	Buttons	Operations

	TV [/1	Turns your TV on or
		off.

	TV 2 (volume)	Adjusts the volume
	+/–	of your TV.

	TV PROG +/–	Selects the
		programme position
		on your TV.

	TV t (input	Switches your TV’s
	select)	input source.

To operate the TV/DVD button (for SCART connections only)

The TV/DVD button switches between TV mode and DVD mode. Press the TV/DVD button when in stop mode or no menu appears on the TV screen. Point your remote at the recorder when using this button.

TV mode: switch to this when you use the TV’s tuner mainly. When you start playback, the input source for the TV is set to the recorder automatically.

DVD mode: switch to this when you use the recorder’s tuner mainly.

To check the current mode, press DISPLAY (page 36).

If you have a Sony DVD player or more than one Sony DVD recorder

If the supplied remote interferes with your other Sony DVD recorder or player, set the command mode number for this recorder and the supplied remote to one that differs from the other Sony DVD recorder or player after you have completed “Step 6: Easy Setup.”

The default command mode setting for this recorder and the supplied remote is “3 (Default setting).”

You can check the current Command Mode in the front panel display. For details, see page 115.

The default command mode setting for this recorder and the supplied remote is “3 (Default setting).”

The remote does not function if different command modes are set for the recorder and remote. Set the same command mode.

Changing programme positions of the recorder using the remote

You can change programme positions of the recorder using the number buttons.

Example: for channel 50

Press “5,” “0,” then press ENTER.

Settings and Hookups

Step 6: Easy Setup

Make the basic adjustments by following the on-screen instructions in “Easy Setup.”

Be careful not to disconnect the cables or exit the “Easy Setup” function during this procedure.

[/1

</M/m/,, ENTER

O RETURN

TV [/1

1 Turn on the recorder and your TV. Then switch the input selector on your TV so that the signal from the recorder appears on your TV screen.

The “Language” display appears.

•If the “Language” display does not appear, select “Easy Setup” in the “Basic” setup from “Initial Setup” in the System Menu (page 101).

2 Select a language for the on-screen displays using </M/m/,, and press ENTER.

The initial settings message appears.

3 Select “Start” using M/m, and press

ENTER.

Follow the on-screen instructions to make the following settings.

Auto Channel Setting

•If you connect a TV to this recorder not using SMARTLINK, select “Auto Scan.” Then select your country/ region using </,, and press ENTER. The programme position order will be set according to the country/region you select.

•If you connect a TV to this recorder with SMARTLINK, select “Download from TV.” Then select your country/ region using </,, and press ENTER. The tuner preset data will be downloaded from your TV to this recorder. (For details, refer to the operating instructions supplied with your TV.)

•To skip this setting, select “Do not set.”

To set the programme positions manually, see page 102.

Clock Setting

•Select “Auto” when a programme position in your local area broadcasts a time signal. The “Auto Clock Setting” display appears.

Select a programme position that carries a time signal and then “Start” using </,/m, and press ENTER. If a clock signal cannot be found, press O RETURN, and set the clock manually.

•Select “Manual” to set the clock manually. The “Manual Clock Setting” display appears.

1Select the time zone for your area or GMT (Greenwich Mean Time) using </,, and press m.

2Select “On” using </, if you are now on summer time, and press ENTER.

3Set the day, month, year, hour and minutes using </M/m/,, and press ENTER to start the clock.

TV Type (page 111)

•If you have a wide-screen TV, select “Wide (16:9).”

•If you have a standard TV, select “Standard (4:3).” This will determine how “wide-screen” images are displayed on your TV.

Progressive

When you connect a progressive format TV to this recorder using the COMPONENT VIDEO OUT jacks, select “Compatible.”

HDD caution messages

Read the HDD caution messages, and press ENTER.

4 Select “Finish Setup” using M/m, and press ENTER.

“Easy Setup” is completed.

To return to the previous step

Press O RETURN.

z Hint

If you want to run “Easy Setup” again, select “Easy Setup” in the “Basic” setup from “Initial Setup” in the System Menu (page 101).

Settings and Hookups

Connecting a VCR or Similar Device

After disconnecting the recorder’s mains lead from the mains, connect a VCR or similar recording device to the LINE IN jacks of this recorder.

Use the DV IN jack on the front panel if the equipment has a DV output jack (i.LINK jack) (page 74).

For details, refer to the instruction manual supplied with the connected equipment. To record on this recorder, see “Recording from Connected Equipment” on page 47.

Connecting to the LINE 1/DECODER jack

Connect a VCR or similar recording device to the LINE 1/DECODER jack of this recorder.

VCR	TV
VCR
	SCART cord (not supplied)
	to SCART input
to i LINE 1/DECODER	to T LINE 3 – TV

DVD recorder

b Notes

•Pictures containing copy protection signals that prohibit any copying cannot be recorded.

•If you pass the recorder signals through a VCR, you may not receive a clear image on your TV screen.

DVD recorder				VCR				TV

Be sure to connect your VCR to the DVD recorder and to your TV in the order shown below. To watch video tapes, watch the tapes through a second line input on your TV.

Line input 1

VCR

DVD recorder

Line input 2

•The SMARTLINK features are not available for devices connected via the DVD recorder’s LINE 1/ DECODER jack.

•To watch the connected VCR or similar device’s pictures through the recorder while the recorder is in standby mode, set “Power Save” to “Off” (default) in the “Basic” setup (page 101).

•When you record to a VCR from this DVD recorder, do not switch the input source to TV by pressing the TV/DVD button on the remote.

•If you disconnect the recorder’s mains lead, you will not be able to view the signals from the connected VCR.

Connecting to the LINE 2 IN jacks on the front panel

Connect a VCR or similar recording device to the LINE 2 IN jacks of this recorder. If the equipment has an S-video jack, you can use an S-video cord instead of an audio/video cord.

	OUTPUT	VCR, etc.
	OUTPUT
S VIDEO	VIDEO	AUDIO
	L	R

S-video cord

Audio/video cord

(not supplied)

to LINE 2 IN

DVD recorder

: Signal flow

z Hint

When the connected equipment outputs only monaural sound, connect to only the L(MONO) and VIDEO input jacks on the front of the recorder. Do not connect the R input jack.

b Notes

•Do not connect the yellow LINE IN (VIDEO) jack when using an S-video cord.

•Do not connect the output jack of this recorder to another equipment’s input jack with the other equipment’s output jack connected to the input jack of this recorder. This may cause noise (feedback).

•Do not connect more than one type of video cord between the recorder and your TV at the same time.

Settings and Hookups

Connecting to a Satellite or Digital Tuner

Connect a satellite or digital tuner to this recorder using the LINE 1/DECODER jack. Disconnect the recorder’s mains lead from the mains when connecting the tuner.

To use the Synchro Rec function, see below.

Do NOT set “LINE 1 In” to “Decoder” in the “Video In/Out” setup (page 106) when making this connection.

	Satellite tuner,	TV
	CanalSat, etc.	TV
	CanalSat, etc.

	SCART cord (not supplied)
	to SCART input
to i LINE 1/DECODER	to T LINE 3 – TV

DVD recorder

If the satellite tuner can output RGB signals

This recorder accepts RGB signals. If the satellite tuner can output RGB signals, connect the TV SCART connector on the satellite tuner to the LINE 1/DECODER jack, and set “LINE 1 In” to “RGB” in the “Video In/Out” setup (page 106). Refer to the instructions supplied with the set top box receiver.

If you want to use the Synchro Rec function

This connection is necessary to use the Synchro-Recording function. See “Recording from connected equipment with a timer (Synchro Rec.)” on page 47.

Set “LINE 1 In” in the “Video In/Out” setup (page 106) according to the specifications of your satellite tuner. Refer to your satellite tuner’s instructions for more information.

b Notes

•Synchro-Recording does not work with some tuners. For details, refer to the tuner’s operating instructions.

•If you disconnect the recorder’s mains lead, you will not be able to view the signals from the connected tuner.

Connecting an External Decoder

You can watch or record external decoder (PAY-TV/Canal Plus analogue decoder) programmes if you connect a decoder (not supplied) to the recorder. Disconnect the recorder’s mains lead from the mains when connecting the decoder. Note that when you set “LINE 1 In” to “Decoder” in step 7 of “Setting external decoder (PAY-TV/Canal Plus analogue decoder) programme positions” (page 30), you will not be able to select “L1” because Line 1 will become a dedicated line for the decoder.

Connecting a decoder

TV	External decoder (PAY-TV/
	Canal Plus analogue decoder)

to AERIAL IN

Aerial cable

(supplied) to SCART input

SCART cord

(not supplied)

to T LINE 3 – TV

SCART cord (not supplied)

to AERIAL OUT

to i LINE 1/DECODER

DVD recorder

Settings and Hookups

,continued 29

Setting external decoder (PAYTV/Canal Plus analogue decoder) programme positions

To watch or record PAY-TV/Canal Plus analogue programmes, set your recorder to receive the programme positions using the on-screen display.

In order to set the programme positions correctly, be sure to follow all of the steps below.

1 Press SYSTEM MENU.

The System Menu appears.

2 Select “Initial Setup,” and press ENTER.

3 Select “Video In/Out,” and press ENTER.

4 Select “LINE 3 Out,” and press ENTER.

5 Press M/m to select “Video” or

“RGB,” and press ENTER.

6 Select “LINE 1 In,” and press ENTER.

7 Press M/m to select “Decoder,” and press ENTER.

8 Press O RETURN to return the cursor to the left column.

9 Select “Tuner,” and press ENTER.

10 Select “Manual CH Setting,” and press ENTER.

11 Select “Next Screen,” and press ENTER.

12 Select your country/region, and press ENTER.

Programme position

13 Select the desired programme position using PROG +/– or number buttons.

14 Select “Channel” using M/m, and select the external decoder programme position using </,.

15 Select “Sound System” using M/m, and select an available TV system, B/ G, D/K, I, or L using </,.

To receive broadcasts in France, select “L.”

16 Select “Decoder” using M/m, and select “On” using </,.

17 Press SYSTEM MENU to exit the menu.

To return to the previous step

Press O RETURN.

b Notes

•If you disconnect the recorder’s mains lead, you will not be able to view the signals from the connected decoder.

•To watch the connected external decoder (PAYTV/Canal Plus analogue decoder) programmes during recording, press the PROGRAM + button on the recorder (“SCART THRU” appears on the front panel display). To return to the previous display, press the PROGRAM – button on the recorder (“SCART NORM” appears on the front panel display). The recorder automatically switches to the programme tuned by the recorder’s tuner after the recording has finished. To watch the connected external decoder (PAYTV/Canal Plus analogue decoder) programmes while the recorder is in standby mode, set “Power Save” to “Off” (default) in the “Basic” setup (page 101).

+ 110 hidden pages

Connector is upside	Not straight
down