Soleus Air PH5 User Manual

0 (0)

PH5 Series Portable Air Conditioner with Heat Pump

Operating Instructions

3092402

PH5(S) SERIES

Thank you for choosing a Soleus Air PH5 Series Portable Air Conditioner with Heat Pump. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new Soleus Air Portable Air Conditioner.

For your own records, please attach a copy of your sales receipt to this manual. Also, write the store name/location, date purchased, and serial number below:

Store Name: ____________________________________________________

Location: ______________________________________________________

Date Purchased: _________________________________________________

Serial Number (located on back of unit): ______________________________

IMPORTANT INSTRUCTIONS

Before installing and using your portable air conditioner, please read this owner’s manual carefully. Store this manual in a safe place for future reference.

1)Always place the unit on a level surface.

2)Never use or store gasoline or other flammable vapor or liquid near this unit unless instructed by this manual.

3)Maintain at least 10 inches (25 cm) clearance space around this unit. Do not block or cover air inlet or outlet grilles.

4)The unit must be connected to a correctly grounded power supply.

5)Do not start or stop the unit by inserting or pulling out the power plug.

6)Do not use an adapter plug or extension cord.

7)Do not use the unit in the immediate surroundings of a bath, a shower or a swimming pool.

8)Do not insert anything into the air outlet. Do not obstruct air inlet or outlet grills unless instructed by this manual.

9)Do not let children play near this unit.

10)Always inspect the cord for signs of damage before use. If the power cord is damaged, it must be replaced by the manufacturer or a qualified service technician.

11)When cleaning the unit, always turn the unit off and unplug the power cord.

PACKAGE CONTENTS

Portable Air Conditioner

Exhaust Hose (1)

Hose Adapter (1)

Window Kit Adapter (1)

Remote Control

AAA Batteries (2)

Window Kit - 3 Sliding Panels

Air Outlet Covers (1)

Owner’s Manual

SPECIFICATIONS

•The cooling capacity is measured at an ambient temperature of DB 86 °F, WB 78 °F.

•The operational ambient temperature is between 23°F ~ 109°F.

•Noise level is measured at a distance of 3.28 ft away from the front of the unit, when the unit is in cooling mode.

•Power consumption is measured when the fan runs at the highest speed setting.

•These specifications are for reference only. For actual data, please refer to the rating label on the back of the unit.

•If the ambient temperature is higher than the max operating temperature or lower than the minimum operating temperature, the air conditioner may not work properly.

MODEL		PH5-12R-32S	PH5-13R-35S
COOLING CAPACITY		12,000 BTU/H	13,000 BTU/H

HEATING CAPACITY		12,000 BTU/H	12,500 BTU/H

DEHUMIDIFIER CAPACITY		60 pts/Day	60 pts/Day

POWER INPUT	COOLING	1320W	1350W
	HEATING	1200W	1180W
AIR FLOW VOLUME		225 CFM	225 CFM
		115V 60Hz	115V 60Hz
POWER SOURCE		11.8A (COOLING)	12A (COOLING)
		11A (HEATING)	11A (HEATING)

SOUND PRESSURE LEVEL		46 dB (A)	46 dB (A)

NET WEIGHT		88 Lbs	88 Lbs
OPERATING	COOLING	60.8 -109	60.8 -109
TEMP	HEATING	23 -89.6	23 -89.6
DIMENSIONS	UNIT	18.875” W ×32” H ×17.125” D	18.875” W ×32” H ×17.125” D

REFRIGERANT		R-410A	R-410A

LCDI POWER CORD AND PLUG

This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord and plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexible cord with no termination on the load side and a LCDI attachment plug on the line side.

The LCDI power cord and plug will remove the supply source via electrical disconnect (circuit trip) if the nominal current leakage between the cord shield and either load conductor exceeds a predetermined value. The cord will remain de-energized until the device has been manually reset. This is intended to reduce the risk of a fire in the power cord or combustible materials nearby. The cord shields are not grounded and they must be considered a shock hazards if exposed. The cord shield must not be connected to ground or to any exposed metal.

The test and reset buttons on the LCDI Plug are used to check if the plug is functioning properly. To test:

1.Plug power cord into wall outlet

2.Press TEST Button, circuit should trip, cutting power to the air conditioner

3.Press RESET button for use

If test button is pressed and unit can still be turned on, current leakage has been detected. Do not use the air conditioner or attempt to reset the LCDI Plug. Contact Soleus Air Customer Service for troubleshooting recommendations.

RESET