Form 19421
( 140 )
Printed in U. S. A.
LIST
O F
PARTS
SINGER
MACHINES
Nos. 114-39 and 114-41
THE SINGER MANUFACTURING COMPANY
♦*A Trad« Mark of THE SINGER MANUFACTURING COMPANY
To ensure easy running and |
prevent |
unnecessary |
wear of |
the parts which are in movable |
contact, |
the machine |
requires |
oiling and when in continuous use, "TYPE B” or "TYPE D” OIL,
sold by |
Singer |
Sewing Machine |
Company, |
should |
be |
|||
applied |
at |
least twice |
each day |
to all |
oil |
holes marked |
||
"OIL", as instructed in Form 8428. |
|
|
|
|
||||
"TYPE D” OIL should be used |
when an oil is desired |
|||||||
which |
will |
produce |
a |
minimum of |
stain |
on |
fabrics, |
even |
after a long period of storage.
Copyright, U. S. A., 1 936 and 1 940,
by The Singer Manufacturing Company
All Rights Reserved for all Countries
|
Page |
Attactnnents and Accessories |
........................................................................... 18 |
Eye and ringer Ouard....................................................................................... |
19 |
root Lifter №rts................................................................................................. |
80 |
Machine No. 114-39........................................................................................... |
5 |
Machine No. 114-41........................................................................................... |
17 |
Numerical List of Parts..................................................................................... |
23 |
Starting Lever.................................................................................................... |
20 |
Table Belt Guide............................................................................................... |
21 |
Thread Unwinder.............................................................................................. |
21 |
ID ordering from ihl3 Uat, use CWLY the part NUMBER in the FIRST column.
The number stamped on a Sewing Machine Part Is In every case the number of the single part only.
Every combination of parts sent out as such has Its specific number, which, although not stamped on the parts, mujt be used when ordering the combination.
Each number always Indicates the SA^E PART In whatever list it appears, or for whatever machine.
The letters after some of the numbers Indicate the style of finish only, as follows:
A-Hardened, Polished, Nickel Plated and Buffed A.A-Buffed and Chromium Plated
A.B-Hardened, Polished, Buffed and Chromluin Plated A.C-Brown Baking Enamel Finish
A.D-Qray Baking Enamel Finish
A.E-Hardened, Bright Rumbled and Nickel Plated
A,F-Hardened, Bright Rumbled, Nickel Plated, Bright Rumbled and Chroralijm Plated
B-Pollshed, Nickel Plated and Buffed C-Hardened Only
C.R-Hardened and Merllzed D-Pollshed Only
E-Soft, Not Polished F-Hardened and Polished
F.J-Hardened, Polished and Nickel Plated
0-Brlght Rumbled and Nickel Plated H-Blued
J-Nlckel Plated Only K-Hardened and Nickel Plated L-Brass Plated
M-CKldlzed N-Japanned, Dull P-Japanned, Bright
P.P-Wrlnkle Finish
R-Merlized S-Cadmium Plated T-Copper Plated
T.A-Hardened, Polished, Coi^sr and Nickel Plated and Buffed T.B-Copper and Nickel Plated and Polished
T.J-Copper and Nickel Plated Only T.K-Hardened, Copper and Nickel Plated T.L-Copper and Brass Plated T.M-Copper Plated and Oxidized
U-Zlnc Plated
V-SIlver Plated
W-Pollshed and Nickel Plated X-Black Oxide, for Iron and Steel
X.C-Ha:dened and Black Oxide, for Iron or Steel Y-Black Nickel Plated Only
Z-Chromluni Plated
Z.A-Hardened,Polished,Nickel Plated,Buffed and Chromium Plated Z.B-Pollshed, Nickel Plated, Buffed and Chromium Plated Z.C-Hardened and Chromium Plated
Z.D-Pollshed and Chromium Plated
Z.Q-Brlght Rumbled, Nickel Plated, Bright Rumbled and Chromium Plated Z.J-Nlckel and Chromium Plated
Z.T-Copper and Chromium Plated
These letters MIßT BE USED vhien they appear In the Hat; and AFTER the number as In the list.
In this scries:
1 to 1500, 50001 to 51500 and 140001 to 142000 are Screw Numbers
1501 to 1800 and 51501 to 51000 are Nut Numbers 1001 to 2000 and 51801 to 52000 are Roller Numbers 2001 to 50000 and 52001 to 140000 and 142001 to 190000 are Sewing Machine Parts, 190001 and upward are numbers of Electrical Parts,
The figures In the second column refer only to the plates. Illustrating the parts, and are NOT TO BE USED in ordeidng.
Parts marked with an asterisk (*) are furnished only when repairs are made at factory.
FOR
For Tacking Paper Tickets on Clothing to Distinguish Lot,
Color, Size, etc., while in process of Manufacture. Trapezoidal tack, 9 stitches, base away from operator. Thread cutter, leaves long end to unravel when detaching ticket. Speed I500R. P.M.
No. |
Plate |
*124845 |
|
62295 |
|
16532 |
9594 |
4448 |
9594 |
56015 |
9594 |
880E |
9594 |
59702 |
9594 |
17703 |
9594 |
50333C |
9594 |
1520J |
9594 |
#4449 |
|
Name
Arm...............................................................................
“124845 With 4449, 15404, 124793 and
two each 164E and 15405...................................
Arm Dowel Pin.............................................................
” Oil Tube for Intermediate beatrlng...
• |
• |
“ oiling 59705 and 59706. |
|
■ Screw |
....................................................................... |
|
|
" Shaft (horizontal)................................................... |
|
||
• |
■ .... |
" |
Bushing (back) |
« • « » »
Justing Screw......................................................
Arm Shaft (horizontal) Bushing (back)
Adjusting Screw Nut...........................................
Arm Shaft (horizontal) Bushing (front)..
6 |
PARTS FOR MACHINE No. ll/(-39 |
|
|
|
|
PARTS FOR MACHINE No. 114-39 |
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
No. Plate |
|
|
|
|
|
Name |
|
|
|
No. |
Plate |
Brake Spring |
Name |
|
|
||||
59703 |
9594 |
Arm |
Shaft |
(horizontal) Gear |
with two |
124846 |
9596 |
|
|
|
|
|
|||||||
|
|
|
1036C |
................................................................... |
|
|
|
|
|
|
136557 |
9597 |
Clamp with 122CE and 17928.................................... |
|
|
||||
1036C |
9594 |
Arm |
Shaft ... |
(horizontal) Gear |
Set Screw |
62258 |
9597 |
" Arm with 17714.................................................... |
|
|
|
|
|||||||
59704 |
9594 |
" |
" ................................................. |
(upright) |
|
|
|
|
|
62259 |
|
" |
" 62258 with 62260 and two 201D. |
||||||
59705 |
9594 |
* |
" ....................... |
|
" Bushing (lower) |
|
|
17710 |
9597 |
• |
" Hinge Plate................................................ |
|
|
|
|
||||
446C |
9594 |
" |
« |
|
n |
|
, |
|
" |
S e t |
1176D |
9597 |
“ |
" |
” |
" Screw................................. |
|
|
|
|
|
Screw................................................................... |
|
|
|
|
|
|
|
62260 |
9597 |
" |
*' Hook.......................................................... |
|
|
|
|
||
59706 |
9594 |
Arm |
Shaft .............. |
(upright) Bushing |
(upper) |
|
20 ID |
9597 |
“ |
" |
" Screw............................................... |
|
|
|
|||||
4460 |
9594 |
Arm |
Shaft |
(upright) Bushing |
(upper) Set |
62261 |
23151 |
" Lifter..................................................................... |
|
|
|
|
|
||||||
|
|
Screw................................................................... |
|
|
|
|
|
|
|
190J |
23151 |
" |
" Screw............................... |
|
|
....................... |
|
||
59707 |
9594 |
Arm Shaft (upright) |
Gear (lower) |
with |
124711 |
23154 |
“ Locking Device Latch with two |
|
|||||||||||
|
|
|
two 1253C |
|
|
|
|
|
|
|
|
1057J.................................................................... |
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
1057J |
23154 |
Clamp Locking Device Latch Clamping |
|
|||||||
12530 |
9594 Arm Shaft (upright) Gear (lower) Set |
|
|
|
|
||||||||||||||
|
|
Screw |
|
|
|
|
|
|
|
|
|
Screw.................................................................... |
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
124678 |
23154 |
Clamp Locking Device Latch Shaft |
|
|||||||
59708 |
9594 |
Arm |
Shaft |
(upright) Gear (upper) with |
|
124678 |
|||||||||||||
|
|
two 12530 |
|
|
|
|
|
|
124696 |
|
" |
„ |
, |
|
« |
» |
|||
|
|
|
|
|
|
|
|
|
with 124679 and 124823 |
|
|
||||||||
12530 |
9594 |
Arm Shaft (upright) Gear (upper) Set |
|
|
|
|
|
|
|||||||||||
|
|
124679 |
23154 |
Clamp Locking Device Latch Shaft Crank.. |
|
||||||||||||||
|
|
Screw.................................................................... |
|
|
|
|
|
|
|
|
|||||||||
124674 |
9594 Arm Side Cover |
|
|
|
|
|
|
|
124660 |
23154 |
■ 0 |
0 |
0 |
|
0 |
0 |
|
||
|
|
|
|
|
|
|
Connection |
|
|
|
|
||||||||
190J |
9594 |
" |
" ................................................. |
" Screw |
|
|
|
|
|
|
|
|
|
|
|
||||
18498 |
9594 |
Belt |
Cover........................................................... |
|
|
|
|
|
|
1282C |
23154 |
Clamp Locking Device Latch Shaft Crank |
|
||||||
59795 |
9594 |
" |
" |
Bracket with 184E and |
59796.. |
|
|
Connection Hinge Screw (lower)........................ |
|
||||||||||
1282C |
23154 |
Clamp Locking Device Latch Shaft Crank |
|
||||||||||||||||
184E |
9594 |
" |
" ........................... |
" |
|
Screw Stud |
|
|
|
|
|||||||||
59796 |
9594 |
" |
" ...................................... |
" |
|
Stud |
|
|
|
|
|
Connection Hinge Screw (upper)....................... |
|
||||||
217J |
9594 |
" |
" Screw......................................................... |
|
|
|
|
|
|
124823 |
23154 |
Clamp Locking Device Latch Shaft Crank |
|||||||
39222 |
23153 |
” |
Shifter.............................................................. |
|
|
|
|
|
|
|
|
Pin......................................................................... |
|
|
|
|
|
||
63976 |
23153 |
" |
" ......................................................Clamp |
|
|
|
|
|
|
17928 |
9597 |
Clamp Position Stud..................................................... |
|
|
|
|
|||
1255D |
23153 |
" |
" ........................................ |
|
" Screw |
|
|
|
|
17712 |
9597 |
“ Pressure Spring.................................................... |
|
|
|
|
|||
124712 |
9596 |
Brake |
....................................................................... |
|
|
|
|
|
|
|
17713 |
9597 |
" |
“ |
|
" |
Bracket........................... |
|
|
124713 |
------- " |
|
124712 .................................with four 56493 |
|
|
|
1177D |
9597 |
• |
“ |
|
" |
|
" Screw................ |
|
||||
124714 |
9596 |
" |
Adjusting ................................................Plate |
|
|
|
|
17714 |
9597 |
• |
" |
|
" Guide Block....................... |
|
|||||
124715 |
9596 |
" |
............................... |
" |
|
" Handle |
|
|
|
1178D |
9597 |
“ |
* |
, 0 |
" |
Screw.............................. |
|
||
124716 |
" |
|
|
* |
|
* |
" |
124715 with |
20437 |
9597 |
" |
0 |
|
0 Washer...................... |
|
||||
|
|
|
“ |
Screw Stud |
|
|
|
|
|||||||||||
|
|
124717................................................................. |
|
|
|
|
|
|
1220E |
9597 |
|
|
|
|
|||||
50435J |
9596 |
Brake |
Adjusting |
Plate Handle |
Hinge |
Screw |
1656J |
9597 |
■ |
Thumb Nut........................................................ |
|
|
|
|
|||||
124717 |
9596 |
" |
............... |
" |
|
" |
" |
Shaft |
|
136558 |
|
Clamp complete. Nos. 1656J, 62259 and |
|
||||||
124718 |
9596 |
" |
|
" |
|
n |
„ |
|
„ |
|
|
|
136557.................................................................. |
|
|
|
|
|
|
|
|
with 12530........................................................... |
|
|
|
|
|
|
*62101 |
|
Cloth Plate.................................................................... |
|
|
|
|
|
|||
1253C |
9596 |
Brake Adjusting Plate Handle Shaft Crank |
|
62102 |
9599 |
" |
• |
Guide |
Block |
(left)..................... |
|
||||||||
|
|
Set Screw............................................................. |
|
|
|
|
|
|
742F |
9599 |
" |
" |
* |
|
" |
"Screw.... |
|
||
51224W |
9596 Brake Adjusting ................................Plate Thumb Screw |
|
|
|
1547D |
9599 |
tt . |
|
« |
|
■ |
• |
* Nut |
||||||
124719 |
9596 |
" |
|
« |
|
« |
« |
|
« |
Bushing |
62103 |
9599 |
“ |
" |
* |
|
“ |
(right).................... |
|
124720 |
9596 |
" |
Arm.................................................................. |
|
|
|
|
|
|
|
3021 |
9599 |
• |
• |
• |
|
• |
• |
Rivet... |
1403D |
9596 |
" |
" Hinge ..............................................Screw |
|
|
|
|
190J |
9599 |
• |
" Screw....................................................... |
|
|
|
|
||||
124902 |
23153 |
" |
" Releasing ........................................Lever |
|
|
|
|
62104 |
9599 |
" |
“ Stop........................................................... |
|
|
|
|
||||
124901 |
.......... I. « |
|
|
, |
1 |
|
it 124902 with |
|
26770 |
9599 |
• |
• |
• Rivet............................................. |
|
|
|
|||
|
|
124903 ..........................................and two 7920 |
|
|
|
|
62105 |
9599 |
Cloth Plate complete. Nos. 742F, 1547D, |
|
|||||||||
124903 |
23153 Brake Arm Releasing .................................Lever Bracket |
|
|
|
|
___ |
26770, 62101 to 62104 and two 3021.. |
|
|||||||||||
7920 |
23153 |
. it |
|
it |
|
|
it |
. Screw. |
*124800 |
Cylinder......................................................................... |
|
|
|
|
|
||||
50446D |
9596 |
’’ |
Hinge ....................................................Screw |
|
|
|
|
|
62189 |
9599 |
" Bottom Cover..................................................... |
|
|
|
|
||||
56493 |
9596 |
" |
Pad (leather).................................................... |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PARTS FOR MACHINE No. 114-39
No. |
Plate |
124742 |
9599 |
124743 |
9599 |
62185 |
9599 |
62111 |
9599 |
1477D |
9599 |
124744 |
9599 |
1477D |
9599 |
62113 |
9599 |
1034D |
9599 |
124745 |
9594 |
236J |
9594 |
59711 |
23151 |
59712 |
23151 |
164J |
23151 |
2107 |
23151 |
229J |
23151 |
9543 |
23151 |
9544 |
23151 |
208J |
23151 |
9545 |
23151 |
63940 |
23152 |
63941 |
|
55381 |
23152 |
641C |
23152 |
63942 |
23152 |
63943 |
|
63944 |
23152 |
62115 |
23152 |
164 9C |
23152 |
1650C |
23152 |
896E |
23152 |
62147 |
23152 |
124676 |
— |
17737 |
23152 |
160D |
23152 |
62149 |
9597 |
Name
Cylinder End Cover....................................................
" " " 124742 with 1034D,
62111,62113,62185,62189,124744 and
four 1477D.............. ...........................................
Cylinder End Cover Bracket......................................
|
|
" |
" Hinge Pin ... |
" |
" |
" |
" Screw ...................... |
" |
" |
" |
Hinge .................................... |
" |
“ |
" |
" Screw ........................... |
" |
" |
" |
Spring .................................. |
" |
“ |
" |
" Screw ........................ |
* Oil Well Cover |
................................................. |
||
" |
n |
■ .............................. |
« Screw |
Face Plate.....................................................................
Face Plate complete. Nos.2080,9544,9545,
59711 and two each 229J, 2107 and
9543......................................................................
Face Plate Screw..........................................................
"* Thread Guard...........................................
" |
" |
" |
" Screw |
............................. |
|
" |
" |
" |
Nipper Disc............................ |
|
|
“ |
" |
" |
« ........... |
« |
Cover |
n II |
|
• |
« |
< 1 « sorew |
|
" |
" |
* |
« .... |
« |
Spring |
Feed Across Connection (lever end) with
two 896E..............................................................
Feed Across Connection (lever end) 63940
with .55381...........................................................
Feed Across Connection (lever end) Ball
Stud......................................................................
Feed Across Connection (lever end) Ball
Stud Set Screw....................................................
Feed Across Connection (regulator end)
with two 896E......................................................
Feed Across Connection (regulator end)
63942 with 63944................................................
Feed Across Connection (regulator end)
Ball Stud..............................................................
Feed Across Connection Adjusting Stud...
II • ■ « «
(left).....................................................................
Feed Across Connection Adjusting Stud
Nut (right)............................................................
Feed Across Connection Cap Screw..........................
'" Lever with 641C and 1952..,.
"• 62147 with 17737..................
“ |
" |
" |
Hinge Stud............................. |
|
" |
• |
" |
* |
* Clamping |
Screw....................................................................
Feed Across Lever Plate with 62153..........................
PARTS FOR MACHINE No. 114-39
No, |
Plate |
124660 |
9597 |
1094F |
9597 |
55300 |
9597 |
1952 |
23152 f |
124847 |
23152 |
124848 |
|
50599D |
23152 |
1676C |
23152 |
46244 |
23152 |
17738 |
23152 |
1188D |
23152 |
62152 |
23152 |
50324E |
23152 |
1655E |
23152 |
14017 |
23152 |
62153 |
9597 |
136559 |
9599 |
39211 |
9594 |
1442C |
9594 |
1441C |
9594 |
39212 |
9599 |
18384 |
9599 |
453C |
9599 |
18384 |
9599 |
1192C |
9599 |
62155 |
9599 I |
55419 |
I |
|
|
1653C |
9599 |
136560 |
9597 |
*18445 |
— |
124662 |
9597 |
59730 |
9597 |
50306D |
9597 |
18368 |
9597 |
934J |
9597 |
1654C |
9597 |
17806 |
9597 |
1195E |
9597 |
8505 |
9597 |
62157 |
23152 |
|
|
|
|
Name |
|
|
Feed |
Across Lever Plate Cover................................. |
|
|
|||
H |
|
|
|
|
||
" " " Screw................................................. |
|
|
|
|||
u |
|
|
|
|||
'' " " Steady Pin......................................... |
|
|
||||
t |
|
|
|
|||
|
" Roller and Stud......................... |
|
||||
n |
|
|
|
|
||
* Regulator................................................. |
|
|
|
|||
H |
|
|
|
|||
” " 124847 with 1188D, |
|
|
||||
Feed |
1655E, 14017 and 50324E................................... |
|
|
|||
Across Regulator Adjusting Screw |
|
|||||
|
|
|
||||
Feed |
Across Regulator Adjusting Screw |
|
||||
Stud Nut............................................................... |
|
|
|
|
||
Feed |
Across Regulator Adjusting Screw |
|
||||
Feed |
Stud Nut Washer (fibre)..................................... |
|
|
|||
Across Regulator Adjusting Screw |
|
|||||
|
Stud Nut Washer (steel)...................................... |
|
|
|||
Feed |
Across Regulator Hinge Screw........................ |
|
||||
II |
|
|
|
|
|
|
|
" " Link |
|
|
|
||
n |
|
|
|
|
||
|
" * " Screw Stud... |
|
|
|||
It |
|
« « » 0 |
« JJy^. |
|
|
|
M |
|
n n It It 0 |
It |
|
|
|
Feed |
Washer.................................................................. |
|
|
|
|
|
Across Regulator Link Stud............................ |
|
|||||
M |
|
|
|
|
|
|
Cam with two 1192C, four each 190J, |
|
|||||
|
|
|||||
Feed |
17874, 136562 and eight 335J............................. |
|
||||
Cam Driving Worm with 1441C and |
|
|||||
Feed |
1442C.................................................................... |
|
|
|
|
|
Cam Driving Worm Position Screw________ |
||||||
H |
" • “ Set Screw |
|
|
|||
« |
|
|
||||
" " * Wheel with 453C |
|
|
||||
n |
Pin |
|
||||
" |
• |
X |
• |
|
||
II |
* " « « 3 g|- Screw... |
|
|
|||
« |
" Pin |
|
|
|
|
|
|
|
|
|
|
||
N |
" Set Screw |
|
|
|
|
|
|
|
|
|
|
||
I |
" Shaft |
|
|
|
|
|
|
|
|
|
|
||
I |
" " 62155 with 1653C and 39212 |
|
||||
n |
|
|||||
" " Nut |
|
|
|
|
||
u |
|
|
|
|
||
Plate |
|
|
|
|
|
|
|
|
|
|
|
|
|
M |
* Carrier Bar |
|
|
|||
|
|
|
||||
H |
" |
" |
“ |
18445 |
with |
934J, |
|
||||||
|
1094F,1195E,8505,17743,18368,62149, |
|
124660, two 55300 and four 17806__________
Feed1 Plate Carrier Bar Pivot Block...........................
n" II « « « Screw
»• " " Plate......................................................
M” “ " " Screw.................................................
N" Nut..............................................................
fl “ Position Stud..............................................
n |
a |
“ Screw Stud |
|
||
|
" " " Rivet |
|
n |
|
|
|
Regulator with 1953 |
|
|
|
10 |
|
No, |
Plate |
62148 |
23152 |
62191 |
|
160D |
23152 |
8589 |
23152 |
1177D |
23152 |
17744 |
9597 |
17743 |
9597 |
1953 |
23152 |
1655C |
23152 |
14017 |
23152 |
1190C |
9597 |
39313 |
9597 |
1191D |
9597 |
124684 |
23156 |
208D |
23156 |
17718 |
23156 |
124749 |
23156 |
124750 |
9594 |
124824 |
23156 |
124797 |
|
124752 |
23156 |
208D |
23156 |
124753 |
23156 |
208J |
23156 |
124754 |
23156 |
124791 |
|
124755 |
23156 |
218D |
23156 |
124757 |
23156 |
124758 |
9594 |
501БОС |
9594 |
50183D |
23156 |
51868 |
23156 |
124759 |
9594 |
229J |
23156 |
124760 |
9594 |
124761 |
9594 |
124762 |
9594 |
52045 |
9594 |
1143C |
9594 |
59707 |
9594 |
59747 |
9594 |
190J |
9594 |
PARTS FOR MACHINE No. И4-39
|
|
Name |
Feed Regulator Bracket with three 160D.. |
||
" |
■' |
” 62148 with 39313 |
|
and 62157............................................................. |
|
Feed Regulator Bracket Cap Screw........................... |
||
" |
» |
» Dowel Pin......................... |
" |
“ |
" Screw............................... |
" |
" Hinge Stud........................................ |
|
" |
* |
Post................................................ |
" |
" Roller and Screw Stud |
with 1655C and 14017.........................................
Feed Regulator Roller and Screw Stud
Nut........................................................................
Feed Regulator Roller and Screw Stud
Nut Washer..........................................................
Feed Regulator Stop Screw.........................................
“" Swivel..................................................
" |
|
* Thumb Screw...................................... |
|
Khlfe.............................................................................. |
|
|
|
" Screw..................................................................... |
|
|
|
" |
“ Washer...................................................... |
|
|
Loop Finger.................................................................. |
|
|
|
" |
" Cam with 50274C .................................... |
||
" |
" Carrier...................... |
.............................. |
|
" |
" |
" |
124824 with 124753.. |
" |
" |
" |
Crank with 208D and |
|
124755.................................................................. |
|
|
Loop Finger Carrier Crank Clamping Screw |
|||
“ |
" |
" Holder....................................... |
|
“ |
" |
• |
" Screw....................... |
““ Pitman with four 218D
"124754 with
124752 and 124757..............................................
Loop Finger Carrier Pitman Ball Stud....
" " " " Cap Screw,,..
"" Driver with 51868 and 124755
" |
" |
' Cam with two 50150C.. |
||
* |
" |
" |
« |
S c r e w ............. |
"" " Hinge Screw.............................
"” " Roller and Stud.......................
* |
" |
Rocking |
Frame................................ |
|
|
" |
*' |
Screw................................................... |
|
|
|
Looper with 34418 |
....................................................... |
|
|
||
* |
Driving .......................................... |
Shaft |
|
|
|
■ |
" |
........................... |
" |
Bushing |
|
" |
« |
|
« |
■ Packing |
|
|
(cotton)................................................................ |
|
|
|
|
Looper Driving .. |
Shaft Bushing |
SetScrew |
|||
“ |
• |
|
“ |
Gear with |
two 1253C |
" |
n |
.............. |
If |
и Cover |
|
" |
. |
|
« |
я • |
Screw.., |
PARTS FOR MACHINE No. 114-39 |
11 |
|
No. |
Plate |
|
1253C |
9594 |
|
50274C |
9594 |
|
124763 |
9594 |
|
124764 |
9594 |
|
50189C |
9594 |
|
124765 |
9594 |
|
50150C |
9594 |
|
34418 |
9594 |
|
62299 |
23151 |
|
*39203 |
— |
|
23151 |
||
136588 |
||
377C |
23151 |
|
1518J |
23151 |
|
65135 |
23151 |
|
391E |
23151 |
|
59757 |
9594 |
|
1293C |
9594 |
|
448C |
9594 |
|
124794 |
23151 |
|
124796 |
23151 |
|
853C |
23151 |
|
1449H |
23151 |
|
124821 |
23151 |
|
42639 |
23151 |
|
124795 |
|
|
124766 |
9594 |
|
124601 |
9594 |
|
465C |
9594 |
|
2273 |
9594 |
|
124767 |
9594 |
|
124792 |
|
|
59761 |
9594 |
|
465C |
9594 |
|
124602 |
9594 |
|
51857 |
9594 |
|
124698 |
9594 |
|
124699 |
9594 |
|
124974 |
.......... |
|
1253C |
9594 |
|
59765 |
9594 |
|
59766 |
9594 |
Name
Looper Driving Shaft Gear Set Screw.......................
"Set Screw
•Shaft..........................................................................................................................
• * Bushing.............................................
*“ " Set Screw...............................
*“ Coupling with four 50150C..
"" * Set Screw................................
"Washer................................................................
Needle Bar with 1072F................................................ |
|
|
|
||
" |
* |
Connecting Link.................................... |
|
|
|
• |
« |
» |
« |
39203 with |
|
377C, 1518J and 65135....................................... |
|
|
|
||
Needle Bar Connecting Link Hinge Screw.. |
fjut |
||||
« |
в |
• |
в |
ш и |
"" *• Stud with 391E_________
■ |
" |
» 0 Screw.... |
|
" |
* |
Crank Wheel with |
448C auid |
1293C...................................................................
Needle Bar Crank Wheel Position Screw.,.
" |
" |
|
" Set Screw......................... |
" |
" |
Thread Retainer..................................... |
|
“ |
■ |
" |
* Bracket with |
853C and two 42639...........................................
Needle Bar Thread Retainer Bracket Set
Screw....................................................................
Needle Bar Thread Retainer Screw...........................
*' |
* |
“ |
" Spring....................... |
|
|
4 |
” steady Pin... |
Needle Bar Thread Retainer complete,Nos. 1449H, 124794, 124796 and 124821--------------
Needle Guard...............................................................
"" Cam with two 465C
"" ” Set Screw....................................
"" Pin........................................................................................
" |
* |
Shaft.................................................. |
|
• |
* |
" |
124767 with 2273 |
and 124766...........................................................
Needle Guard Shaft Collar with two 465C.
* |
“ |
" |
* Set Screw |
................... |
" |
■ |
" |
Crank with 124974 and |
|
|
two 1253C |
............................................................ |
|
|
Needle Guard Shaft .............................Crank Roller |
|
|||
" |
... |
|
I. |
Bushing. |
. |
. . . |
. |
N |
Stud......................................................................
Needle Guard Shaft Crank Roller complete.
Nos. 51857, 124698 and 124699.........................
Needle Guard Shaft Crank Set Screw.......................
^* Spring.......................................
• |
* |
" |
* collar with 624C |