Simplicity SNP I924RX MS, SNP I924E, SMI I924E, SMI I924RX MS, SMI I924EX User Manual

Size:
3.05 Mb
Download

OPERATOR’S MANUAL

Reproduction

 

for

Not

Intermediate Frame

 

Snowthrowers

Interm diate Frame Snowthrowers

Mfg. No.

Description

1695302

SMI I924E B&S 24

1695311

SMI I924EX B&S 24 (CE)

1695410

SMI I924RX MS B&S 24 (CE)

1695313

SNP I924E B&S 24

1695314

SNP I1924EX B&S 24 (CE)

1695411

SNP I924RX MS B&S 24 (CE)

CAUTION: Read and follow all instructions.

Manual Part No. 1734501

Revision B

Rev. Date 12/2008

SAVE THESE INSTRUCTIONS

READ THE MANUAL

The operator’s manual contains important safety information you need to be aware of BEFORE you operate your unit as well as DURING operation.

Safe operating techniques, an explanation of the product’s features and controls, and maintenance information is included to help you get the most out of your equipment investment.

Failure to obey the safety rules could result in loss of control of the unit, severe personal injury or death to you, or bystanders, or damage to property or equipment.

Safety Icons

 

 

 

WARNING

 

The alert symbol

is used to identify safety information

 

about hazards that can result in personal injury. A signal

You must read, understand and comply with all

word (DANGER, WARNING, or CAUTION) is used with the

safety and operating instructions in this

alert symbol to indicate the likelihood and the potential

manual before attempting to set-upand

severity of the injury. In addition, a hazard icon may be used

operate your snowthrower.

to represent the type of hazard. An explanation of hazard

Failure to comply with all safety and operating

levels and icons are as follows:

 

 

 

 

instructions can result in loss of machine

 

 

 

 

DANGER

 

 

 

control, serious personal injury to you and /or

 

 

 

bystanders, and risk of equipment and

 

 

Reproduction

gle in the text

This indicates a hazard which, if not avoided, will result in

p operty damage. The tria

serious injury or death.

 

 

signifies importa t cautio

s or warnings which

 

 

 

 

must be foll wed.

 

WARNING

 

Not

 

 

This indicates a hazard which, if not avoided, could result in

 

 

serious injury or death.

 

forWARNING

 

CAUTION

 

 

 

Engine exhaust from this product contains

 

 

 

chemicals known, in certain quantities, to

This indicates a hazard which, if not avoided, might result in

ca se cancer, birth defects, or other

minor or moderate injury.

 

 

reproductive harm.

 

 

 

 

 

SAFETY DECALS

 

 

These labels are easily applied and will act as a

This unit has been designed and manufactur

to

constant visual reminder to you, and others who may

use the equipment, to follow the safety instructions

 

 

 

 

provide you with the safety and reliability you would

necessary for safe, effective operation.

expect from an industry leader in outdoor power

 

equipment manufacturing.

 

Although reading this manual and the safety

 

instructions it contains will provide you with the

 

necessary basic knowledge to operate this equipment

 

safely and effectively, we have placed several safety

 

labels on the unit to remind you of this important

 

information while you are operating your unit.

 

All DANGER, WARNING, CAUTION and

 

instructional messages on your product should be

 

carefully read and obeyed. Personal bodily injury can

 

result when these instructions are not followed. The

 

information is for your safety and it is important.

 

If any decals are lost or damaged, replace them at

 

once. See your local dealer for replacements.

 

Read and obey all operation and warning decals.

Table of Contents

Operator Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Read the Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Safety Rules and Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Safety Decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Safety Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Identification Numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Features & Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Control Locations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Operation . . . . . .

. . .

. . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . .

14

General Operation .

. . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14

Starting Controls . .

. . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

15

Starting the Engine.

. . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

16

Stopping the Engine. . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17

Operating the Snowthrower . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17

Ground Speed Selector . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17

Engine Speed . .

. . .

. . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17

Belt AdjustmentReproduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

28

Deflector . . . . .

. . .

. . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18

 

 

 

for

 

Scraper Bar & Skid Shoes . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18

Traction Drive Lock . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18

Clearing a Clogged Discharge Chute . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19

After Each Use .

. . .

. . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19

 

Not

 

 

Storage . . . . . .

. . .

. . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19

Maintenance . . . .

. . .

. . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . .

20

Maintenance Schedule . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

21

Checking Tire Pressure . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

21

Auger Gear Case Lubrication . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

21

Lubrication. . . .

. . .

. . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

21

Regular Maintenance . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

22

Troubleshooting, Adjustment, and Se vice . . . . . . . . . . . . . . . . . . . . . . .

24

Troubleshooting. . .

. . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

24

Adjustments . . . . .

. . .

. . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . .

26

Auger Drive Adjustm nt . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26

Traction Drive Cable Adjustment .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26

Run-InAdjustment.

. . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

27

Adjust the Drag

 

the Chute Rotation. . . . . . . . . . . . . . . . . . . . . . . . . . . .

27

Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Shear Pin Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Belt Guide Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Belt Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Parts and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Maintenance Items. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Technical Manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Safety

Operation Controls & Features

Specifications Adjustments/Service Troubleshooting Maintenance

3

Safety

Safety Rules & Information

Operating Safety

Congratulations on purchasing a superior-qualitypiece of lawn and garden equipment. Our products are designed and manufactured to meet or exceed all industry standards for safety.

Power equipment is only as safe as the operator. If it is misused, or not properly maintained, it can be dangerous! Remember, you are responsible for your safety and that of those around you.

Use common sense, and think through what you are doing. If you are not sure that the task you are about to perform can be safely done with the equipment you have chosen, ask a professional: contact your local authorized dealer.

Read the Manual

The operator’s manual contains important safety

 

information you need to be aware of BEFORE you perate

your unit as well as DURING operation.

 

Safe operating techniques, an explanation of he product’s

features and controls, and maintenance inf rma

n isfor

included to help you get the most out of y ur equipment

investment.

 

 

Be sure to completely read the Safety Rules and

 

Information found on the following pages. Also

mpletely

read the Operation section.

Not

 

Reproduction

Children

Tragic accidents can occur with children. Do not allow them anywhere near the area of operation. Children are often attracted to the unit and snowthrowing activity. Never assume that children will remain where you last saw them. If there is a risk that children may enter the area where you are operating the unit, have

another responsible adult watch them.

DO NOT ALLOW CHILDREN TO OPERATE THIS UNIT! This encourages them to come near the unit in the future while it is running, and they could be seriously hurt. They may then approach the unit when you are not expecting it, and you may run over them.

4

Safety Rules and Information

Moving Parts

This equipment has many moving parts that can injure you or someone else. However, if you are standing in the operator’s position, and follow all the rules in this book, the unit is safe to operate.

The auger and impeller have spinning parts that can amputate hands and feet. Do not allow anyone near the equipment while it is running! DO NOT clear the discharge chute by hand. If the chute becomes plugged, stop the engine, wait for all moving parts to stop, and clear the blockage with a clean-outtool or piece of wood.

To help you, the operator, use this equipment safely, it is equipped with an operator-presentsafety system. Do NOT attempt to alter or bypass the system. See your dealer immediately if the system does not pass all the safety interlock system tests found in this manual.

 

 

Thrown Objects

Reproduction

 

for

This unit has a spi i g auger and impeller.

 

 

They ck up a d throw snow and ice. Thrown

 

 

debr s c uld seri usly injure a bystander.

Not

 

ALWAYS rect the discharge chute away from

 

 

bys anders and property that could be damaged

 

 

by flying debris. Be sure to clean up the area to

 

 

be leared BEFORE you start.

 

 

Do not allow anyone in the area while the unit is

 

 

running! If someone does enter the area, shut

 

 

the unit off immediately until they leave.

Fuel and Maintenance

 

 

Gasoline is extremely flammable. Its vapors are also

 

extremely flammable and can travel to distant ignition

 

sources. Gasoline must only be used as a fuel, not as

 

a solvent or cleaner. It should never be stored any

 

 

place where its vapors can build up or travel to an

 

 

ignition source like a pilot light. Fuel belongs in an

 

 

approved, plastic, sealed gas can, or in the

 

 

snowthrower fuel tank with the cap securely closed.

 

 

Spilled fuel needs to be cleaned up immediately.

 

 

Proper maintenance is critical to the safety and performance of your unit. Be sure to perform the maintenance procedures listed in this manual, especially periodically testing the safety system.

Safety

5

Safety

Safety Rules & Information

This machine is capable to amputating hands and feet and throwing objects. Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe

TRAINING

 

 

 

 

9. Always wear safety glasses or eye shields during

1. Read, understand, and follow all instructions on the

operation or while performing an adjustment or

repair to protect eye from foreign objects that may

machine and in the manuals before operating this

be thrown from the machine.

 

unit. Be thoroughly familiar with the controls and

 

 

the proper use of the equipment. Know how to

 

OPERATION

 

 

 

stop the unit and disengage the controls quickly.

 

 

 

 

2. Never allow children to operate the equipment.

 

1. Do not put hands or feet near or under rotating

Never allow adults to operate the equipment

 

parts. Keep clear of the discharge opening at all

without proper instruction.

 

 

 

 

times.

 

 

 

 

3. Keep the area of operation clear of all persons,

 

2. Exercise extreme caution when operating on or

particularly small children and pets.

 

 

 

crossing gravel drives, walks, or roads. Stay alert

4. Exercise caution to avoid slipping or falling

 

 

for hidden hazards or traffic.

 

especially when operating in reverse.

 

 

 

3. After striking a foreign object, stop the engine

PREPARATION

 

 

 

 

(motor), remove the wire from the spark plug,

 

 

 

 

disconnect the cord on electric motors, thoroughly

1. Thoroughly inspect the area where the equipment

inspect the snowthrower for any damage, and

repair the damage before restarting and operating

is to be used and remove all doormat, sleds,

 

 

the snowthrower.

 

 

boards, wires, and other foreign objects.

 

 

 

 

 

 

 

 

 

 

 

 

 

Reproduction

 

2. Disengage all clutches and shift into neutral before

4. If the unit should start to vibrate abnormally, stop

starting engine (motor).

 

 

 

 

the engine (motor) a d check immediately for the

3. Do not operate the equipment without wearing

 

cause. Vibrati

is ge

erally a warning of trouble.

adequate winter outer garments. Wear footwear

 

5. Stop the eng ne (m t

r) whenever you leave the

that will improve footing on slippery surfaces.

 

 

pera ing p s

n, before unclogging the

Avoid loose fitting clothing that can get caught in

 

collec or/ mpeller h using or discharge guide, and

moving parts.

 

 

 

 

when mak ng any repairs, adjustments, or

4. Handle fuel with care; it is highly flammable.

 

 

inspe

ions.

 

 

 

(a) Use an approved fuel container.

 

 

 

6. When

leaning, repairing, or inspecting make

 

 

for

 

 

 

 

 

(b) Never add fuel to a running engine

r h

 

 

certain the ollector/impeller and all moving parts

engine.

 

 

 

 

have stopped. Disconnect the spark plug wire and

(c) Fill fuel tank outdoors with extreme care. Never

keep the wire away from the plug to prevent

fill fuel tank indoors. Replace fuel cap securely

 

accidental starting.

 

 

 

7. Do not run the engine indoors except for starting

and wipe up spilled fuel.

Not

the engine or for transporting the snowthrower in or

 

(d) Never fill containers inside a vehicle or

a

 

out of the building. Open the outside doors;

truck or trailer bed with a plastic liner. Always

 

 

exhaust fumes are dangerous.

 

place containers on the ground, away from your

 

 

 

8. Exercise extreme caution when operating on

vehicle, before filling.

 

 

 

 

 

 

 

 

slopes.

Do not attempt to clear steep slopes.

(e) When practical, remove gas-powr

d

 

 

 

 

9. Never operate the snowthrower without proper

equipment from the truck or trailer and r fu

l it on

guards plates, or other safety protective devices in

the ground. If this is not possible, th

fu

l such

place and working.

 

The triangle in

on a trailer with a portable container, rather than

 

 

 

 

 

 

personal injury or death to you, or bystanders, or damage to property or equipment.

text signifies important cautions or warnings which must be followed.

 

 

 

from a gasoline dispenser nozzle.

10. Never direct the discharge toward people or areas

where property damage can occur. Keep children

(f) Keep nozzle in contact with the rim of the fuel

and others away.

tank or container opening at all times, until

11. Do not overload the machine capacity by

refueling is complete. Do not use a nozzle lock-

attempting to clear snow at too fast a rate.

open device.

12. Never operate the machine at high transport

(g) Replace gasoline cap securely and wipe up

speeds on slippery surfaces. Look behind and use

spilled fuel.

care when operating in reverse.

(h) If fuel is spilled on clothing, change clothing

13. Disengage power to the collector/impeller when

immediately.

snowthrower is transported or not in use.

5. Use extension cords and receptacles as specified

14. Use only attachments and accessories approved

by the manufacturer for all units with electric drive

by the manufacturer of the snowthrower (such as

motors or electric starting motors.

wheel weights, counterweights, or cabs).

6. Adjust the collector housing height to clear gravel

15. Never operate the snowthrower without good

or crushed rock surfaces.

visibility or light. Always be sure of your footing,

7. Never attempt to make any adjustments while the

and keep a firm hold on the handles. Walk, never

engine (motor) is running (except when specifically

run.

recommended by the manufacturer).

16. Never touch a hot engine or muffler.

8. Let engine (motor) and machine adjust to outdoor

17. Never operate the snowthrower near glass

temperatures before starting to clear snow.

enclosures, automobiles, window wells, drop-offs,

 

 

and the like without proper adjustment of the

6

 

 

 

 

Safety Rules and Information

discharge angle.

 

 

 

until fuel vapors have dissipated.

18. Never direct discharge at bystanders or allow

 

7. Always observe safe refueling and fuel handling

anyone in front of the unit.

 

 

 

practices when refueling the unit after

19. Never leave a running unit unattended. Always

 

transportation or storage.

disengage the auger and traction controls, stop

 

8.Always follow the engine manual instructions for

engine, and remove keys.

 

 

 

storage preparations before storing the unit for

20. Do not operate the unit while under the influence of

both short and long term periods.

alcohol or drugs.

 

 

 

9. Always follow the engine manual instructions for

21. Keep in mind the operator is responsible for

 

proper start-upprocedures when returning the unit

accidents occurring to other people or property.

 

to service.

22. Data indicates that operators, age 60 years and

 

10. Maintain or replace safety and instruction labels as

above, are involved in a large percentage of power

necessary.

equipment-relatedinjuries. These operators

 

11. Keep nuts and bolts tight and keep equipment in

should evaluate their ability to operate the unit

 

good condition.

safely enough to protect themselves and others

 

12. Never tamper with safety devices. Check their

from injury.

 

 

 

proper operation regularly and make necessary

23. DO NOT wear long scarves or loose clothing that

 

repairs if they are not functioning properly.

could become entangled in moving parts.

 

13. Components are subject to wear, damage, and

24. Snow can hide obstacles. Make sure to remove all

deterioration. Frequently check components and

obstacles from the area to be cleared.

 

 

replace with manufacturer’s recommended parts,

 

 

 

 

when necessary.

CHILDREN

 

 

 

14. Check control operation frequently. Adjust and

Tragic accidents can occur if the operator is not alert to

 

service as required.

 

15. Use only factory authorized replacement parts

the presence of children. Children are often attracted to

when making repairs.

the unit and the operating activity. Never assume that

 

16. Always comply with factory specifications on all

children will remain where you last saw them.

 

 

settings and adjustme ts.

1. Keep children out of the area and under the

 

17. Only auth rized service locations should be utilized

 

f major serv ce and repair requirements.

watchful care of another responsible adult.

 

 

18. Never a empt make major repairs on this unit

2. Be alert and turn unit off if children enter the area.

unless you have been properly trained. Improper

3. Never allow children to operate the unit.

 

 

 

 

servi e pro edures can result in hazardous

4. Use extra care when approaching blind corners,

 

 

operation, equipment damage and voiding of

shrubs, trees, or other objects that may

bscure

 

for

 

 

 

vision.

 

 

 

man fa turer’s warranty.

 

 

 

19. Check shear bolts and other bolts at frequent

CLEARING A CLOGGED DISCHARGE

 

intervals for proper tightness to be sure the

 

equipment is in safe working condition.

CHUTE

 

 

 

EMISSIONS

Hand contact with the rotating impeller inside the

 

discharge chute is the most common cause of inju y

 

1. Engine exhaust from this product contains

 

Not

 

associated with snowthrowers. Never use your hand

 

chemicals known, in certain quantities, to cause

to clean out the discharge chute.

 

 

 

cancer, birth defects, or other reproductive harm.

To clear the chute:

 

 

 

2. If available, look for the relevant Emissions

1. SHUT OFF THE ENGINE.

 

 

 

Durability Period and Air Index information on the

2. Wait 10 seconds to be sure the imp ll

blad s

 

engine emissions label.

have stopped rotating.

 

 

 

 

3. Always use a clean out tool, not your hands.

 

IGNITION SYSTEM

 

 

 

 

SERVICE, MAINTENANCE, AND STORAGE

1. This spark ignition system complies with Canadian

standard ICES-002.

Reproduction 1. Check shear bolts and other bolts at frequent

intervals for proper tightness to be sure the equipment is in safe working condition.

2. Never store the machine with fuel in the fuel tank inside a building where ignition sources are present such as hot water and spacer heaters, or clothes dryers. Allow the engine to cool before storing in any enclosure.

3. Always refer to the operator’s manual for important details if the snowthrower is to be stored for an extended period.

4. Maintain or replace safety and instruction labels as necessary.

5. Run the machine a few minutes after throwing snow to prevent freeze-upof the collector/impeller.

6. If fuel is spilled, do not attempt to start the engine but move the machine away from the area of spillage and avoid creating any source of ignition

Safety

7

Safety

Decals

DECALS

This unit has been designed and manufactured to provide you with the safety and reliability you would expect from an industry leader in outdoor power equipment.

Although reading this manual and safety instructions it contains will provide you with the necessary basic knowledge to operate this equipment safely and effectively, we have placed several safety labels on the unit to remind you of this important information while you are operating your unit.

All WARNING, CAUTION, and instructional messages on your unit should be carefully read and obeyed. Personal bodily injury can result when these

instructions are not followed. The information is for your safety and it is important.

The safety decals below are on your unit.

If any of these decals are lost or damaged, replace them at once. See your local dealer for replacements.

These labels are easily applied and will act as a constant visual reminder to you, and others who may use the equipment, to follow the safety instructions necessary for safe, effective, operation.

Note: Engine operation and safety decals are supplied by the engine manufacturer.

NORTH AMERICAN MODEL DECALS

 

 

ReproductionDecal

 

 

 

DANGER

for

 

WARNING

 

 

 

Amputation hazard

 

 

Avoid Serious Injury r Death

 

 

 

Contact with moving parts inside chute will cause

 

 

 

 

 

 

 

serious injury.

 

 

 

• Read he pera r's manual.

 

 

 

• Shut off engine before unclogging discharge chute.

 

 

 

 

 

 

 

• Use clean-outtool, not hands!

 

• Do not defeat the safe y

• Keep area of operation clear of

 

 

 

Not

 

 

 

 

 

 

 

 

Carbon monoxide hazard

 

features of the

ontrols.

all persons, especially children.

 

 

 

This engine emits poisonous carbon monoxide gas.

• Keep ma hine maintained

• Never allow children to

 

 

 

• Avoid inhaling exhaust fumes.

 

 

 

 

• Only operate utd rs.

 

and g ards in pla e.

operate the snowthrower.

 

Traction

 

Fire hazard

 

• Stop engine and dis onne t

• Always direct discharge chute so

Auger

Engage

 

Gasoline is flammable.

 

spark pl g wire before

as to avoid injury to persons or

Engage

 

 

• Allow engine t c l f r at least 3 minutes before

servicing the

nit.

damage to property.

 

 

 

refueling.

 

 

 

 

 

1734499

 

Part

. 1734499 - DASH SMI/SNAPPER

 

 

Main Dash Decal, N

th American

 

 

WARNING

The lubrication points shown here must be lubricated

 

 

DANGER

 

DANGER

with 30 weight oil every 10 hours of operation, and

 

 

Amputation hazard

 

 

 

Required maintenance

before using the unit after storage. Failure to lubricate

 

 

 

Amputation hazard

may cause a malfunction of the safety system.

1733526

 

Contact with the auger will cause

 

 

 

Contact with moving parts

 

 

 

 

 

serious injury.

 

 

 

 

 

 

 

• Keep hands, feet, and clothing

inside chute will cause

 

Part No. 1733526

 

 

away.

 

 

serious injury.

 

 

 

• Shut off engine before servicing.

 

 

 

 

1716532

Shut off engine before

 

Lubrication Decal

 

Part No. 1716532

unclogging discharge chute.

 

 

Use clean-outtool, not hands!

1733057

 

Auger Danger

 

 

Part No. 1733057

 

 

 

 

 

 

 

 

Discharge Chute

 

 

 

 

Danger Decal

 

 

 

 

 

 

 

 

“V” BELTS STRETCH

 

 

 

 

UNDER NORMAL

 

 

 

 

USE WHICH WILL

 

 

 

 

AFFECT DISCHARGE

 

 

 

 

PERFORMANCE AND

 

 

 

 

SHOULD BE

 

 

 

 

PERIODICALLY

 

 

 

 

ADJUSTED. REFER

 

 

 

 

TO MANUAL FOR

 

 

 

 

INSTRUCTIONS.

 

Part No. 728183

 

 

 

 

 

Part No. 725432

Important

 

 

Belt Stretch &

Over Adjustment

 

 

Adjust

 

 

8

Decals

ALL MODEL DECALS

Safety

Part No. 724172 - SMI/SNAPPER

Speed Control Decal, All Models

Reproduction

 

Not

for

 

CE MODEL DECALS

 

 

 

17345

Part No. 1734591 - SMI/SNAPPER

 

Main Dash Decal, Export - CE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Part No. 1727207

 

 

 

 

 

 

 

 

Part No. 1727208

Part No. 728183

Discharge Chute

Auger Danger Decal

Danger Decal

Important

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Over Adjustment

9

Safety Icons
SAFETY ICONS
WARNING: READ OPERATOR’S MANUAL.
Read and understand the Operator’s Manual before using this machine.
DANGER: THROWN OBJECTS.
This machine is capable of throwing objects and debris. Keep bystanders away.
WARNING: REMOVE KEY BEFORE SERVICING.
Remove the key, disconnect spark plug wire, and consult technical literature before performing repairs or maintenance.

Safety

10

WARNING: DISMEMBERMENT.

This machine can amputate limbs. Keep bystanders and children away when engine is running.

DANGER: DISMEMBERMENT.

The auger can amputate limbs. Keep hands and feet away from auger and rotating parts.

DANGER: DISMEMBERMENT.

The impeller can amputate limbs. Stop the engine, remove the key, and disconnect spark plug wire before clearing the discharge chute or performing service work. Keep

hands and feet away from impeller ReproductionNotforand otating parts.