Simplicity 386777, 2690445, 2690444, 385777, 5022811SM 1 User Manual
...
Parts Manual
Citation
Series Zero-Turn Riders & Mower Decks
21HP Product
Mfg. No. Description
2690444 Citation, 21HP Briggs & Stratton Zero Turn Rider w/48" Mower
23HP Product
Mfg. No. Description
2690445 Citation, 23HP Briggs & Stratton Zero Turn Rider w/52" Mower
Part No.: 1733092
Rev. 8/2008
TP 400-7287-S-CI-S
|
Table Of Contents |
PRODUCT COMPONENTS |
PAGES |
Main Frame & Front Suspension Group .............................................................................................................. |
4 |
Rear Bumper Group ............................................................................................................................................. |
6 |
Engine & PTO Group ........................................................................................................................................... |
8 |
Instrument Control Panel Group .......................................................................................................................... |
10 |
Pump Drive Group ............................................................................................................................................... |
12 |
Motion Control Group - S/N: 201317250 & Below ............................................................................................... |
14 |
Motion Control Group - S/N: 201317251 & Above .............................................................................................. |
18 |
Hydraulic Group ................................................................................................................................................... |
22 |
Hydraulic Mount Group ........................................................................................................................................ |
26 |
Electrical Group .................................................................................................................................................... |
28 |
Seat, Mount & Floor Group .................................................................................................................................. |
30 |
Fuel Supply Hose Group & Tank Replacement Parts Group .............................................................................. |
32 |
Fuel Tank & Mount Group .................................................................................................................................... |
34 |
Parking Brake Group ............................................................................................................................................ |
36 |
Rear Suspension Group ...................................................................................................................................... |
38 |
Deck Lift Group - S/N: 2013202961 & Below ...................................................................................................... |
40 |
Deck Lift Group - S/N: 2013202962 & Above ...................................................................................................... |
44 |
Wheel & Tire Group ............................................................................................................................................. |
48 |
Decals - Brand & Model ....................................................................................................................................... |
50 |
Decals - Safety & Operation ................................................................................................................................ |
52 |
48" & 52" Mower Deck - Hanger Chains .............................................................................................................. |
54 |
48" & 52" Mower Deck - Housing, Cover, Spindle & Blade ................................................................................. |
56 |
48" & 52" Mower Deck - Pulleys, Belts & Idler Arm ............................................................................................. |
58 |
48" & 52" Mower Deck - Rollers ........................................................................................................................... |
60 |
48" & 52" Mower Deck - Spindle Service Parts Group ........................................................................................ |
62 |
Torque Specification Chart ..................................................................... |
Inside Back Cover |
Main Frame & Front Suspension Group
NOTE: Unless noted otherwise, |
287frm0 |
use the standard hardware torque specification chart.
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
Copyright © 2008 by Briggs and Stratton Corporation 4 TP 400-7287-S-CI-S Milwaukee, WI, USA. All rights reserved
Main Frame & Front Suspension Group
REF NO. PART NO. |
QTY. DESCRIPTION |
||
1 |
5400257CSM |
1 |
MAIN FRAME ASSEMBLY (Serial No.: 2013170250 & Below) |
2 |
5021072SM |
2 |
GREASE SEAL |
3 |
5025203X10SM |
2 |
COTTER PIN, 1/8" X 1-1/4" |
4 |
5025303SM |
8 |
SCREW, 5/16-18 X 1 FLAT HD SC |
5 |
5025057SM |
8 |
NUT, 5/16-18 Hex Nylon Lock |
6 |
5025013X14SM |
2 |
BOLT, 3/8-16 X 1-3/4" |
7 |
5025394SM |
4 |
NUT, 3/8-16 Hex Nylock Flange |
8 |
5025013X32SM |
2 |
BOLT, 3/8-16 X 4" |
9 |
5045990SM |
2 |
FRICTION PLATE |
10 |
5023483SM |
2 |
SHOCK & SPRING ASSEMBLY |
11 |
5020884SM |
4 |
BEARING, Tapered Roller |
12 |
5021073SM |
2 |
CAP |
13 |
5047049CSM |
2 |
CASTER YOKE |
14 |
5025104SM |
2 |
NUT, 3/4-16 Hex Slotted |
15 |
5025160SM |
6 |
WASHER, 3/4" SAE |
16 |
5025284SM |
1 |
NUT, 3/4-16 Hex Nylon Lock |
17 |
5047489SM |
1 |
SPACER, .75 X 1.00 X 2.38 |
18 |
5025265X52SM |
1 |
BOLT, 3/4-16 X 6-1/2" |
19 |
5401410SM |
1 |
ASSM, PIVOTING FRONT END (Includes Ref. #'s 20 and 21) |
20 |
5022852SM |
1 |
PIVOT BEARING |
21 |
5100358SM |
1 |
PIVOT BEARING |
22 |
5025156SM |
4 |
WASHER, 3/8" SAE |
23 |
5025165SM |
6 |
WASHER, 3/8" FENDER |
24 |
5402536CSM |
1 |
WELD, PIVOTING FRONT END - ORG (Serial No.: 2000676809 & Above) |
25 |
5100882SM |
2 |
CAP, CASTER SPINDLE LOW PROFILE (Serial No.: 2000676809 & Above) |
26 |
5025448SM |
2 |
NUT, 3/4-16 HEX JAM NYLON LOCK (Serial No.: 2000676809 & Above) |
27 |
5025449SM |
4 |
BELLEVILLE WASHER, 1.500 X .755 (Serial No.: 2000676809 & Above) |
28 |
5020883SM |
4 |
BEARING CUP (Serial No.: 2000676809 & Above) |
29 |
5402208CSM |
2 |
WELD, CASTER YOKE - ORG. (Serial No.: 2000676809 & Above) |
30 |
5025457SM |
2 |
BOLT, 1/4-28 X 1/2, GD5 YZ (Serial No.: 2000676809 & Above) |
31 |
5404316CSM |
1 |
WELD, Main Frame Assembly (Serial No.: 2013170251 & Above) |
Footnotes
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
Copyright © 2008 by Briggs and Stratton Corporation 5 TP 400-7287-S-CI-S Milwaukee, WI, USA. All rights reserved
Rear Bumper Group
NOTE: Unless noted otherwise, |
287bmp1 |
use the standard hardware torque specification chart.
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
Copyright © 2008 by Briggs and Stratton Corporation 6 TP 400-7287-S-CI-S Milwaukee, WI, USA. All rights reserved
Rear Bumper Group
REF NO. PART NO. |
QTY. DESCRIPTION |
||
1 |
- |
- |
MAIN FRAME |
2 |
5401174CSM |
1 |
HEAT SHIELD |
3 |
5403268CSM |
1 |
BUMPER |
4 |
5400844CSM |
1 |
PLATE, SEAT BELT ANCHOR - LH |
5 |
5400847CSM |
1 |
PLATE, SEAT BELT ANCHOR - RH |
6 |
5025158SM |
4 |
WASHER, 1/2" SAE |
7 |
5025396SM |
6 |
NUT, 1/2-13 HEX NYLOCK FLANGE |
8 |
5025017X26SM |
4 |
BOLT, 1/2-13 X 3-1/4" GD5 |
9 |
5061725CSM |
1 |
CARB PROTECTOR PLATE |
10 |
5023484SM |
6 |
PLUG, PANEL, 1.25 BLACK |
11 |
- |
1 |
ROLL BAR TOP LOOP |
12 |
- |
1 |
ROLL BAR POST, RH |
13 |
- |
1 |
ROLL BAR POST, LH |
14 |
5025156SM |
2 |
WASHER 3/8" SAE |
15 |
5025013X8SM |
2 |
BOLT, 3/8-16 X 1" GD5 |
16 |
5025394SM |
2 |
NUT, 3/8-16 X 1" GD5 |
17 |
5025011X6SM |
4 |
BOLT, 5/16-18 X 3/4" GD5 |
18 |
5025392SM |
4 |
NUT, 5/16-18 HEX NYLOCK FLANGE |
19 |
5025017X14SM |
2 |
BOLT, 1/2-13 X 1-3/4 GD5 YZ |
20 |
5025396SM |
2 |
NUT, 1/2 X 13 HEX NYLOCK FLANGE |
21 |
5100139SM |
1 |
SEAT BELT ASSEMBLY, STANDARD |
21 |
5100397SM |
1 |
SEAT BELT ASSEMBLY, EXTRA LONG |
22 |
5100377SM |
1 |
ROLL BAR HARDWARE BAG |
23 |
5100079SM |
2 |
PIN, HITCH, BLACK W/ PLASTIC LANYARD |
24 |
5100383SM |
2 |
RUBBER BUMPER |
25 |
5100267SM |
2 |
SCREW, 1/2-13 X 1.00, SHCS |
26 |
- |
2 |
*BOLT |
27 |
- |
2 |
*NUT |
28 |
5100186SM |
1 |
ROPS COMPLETE IN BOX, IS1500 |
29 |
5025155SM |
4 |
WASHER, 5/16"SAE |
30 |
5045178SM |
1 |
SPACER, .52 X 1.00 X .75 |
31 |
5100520SM |
1 |
SPACER, .515 X 1.00 X .218 |
32 |
5101049SM |
1 |
CAP, VINYL |
33 |
5100545SM |
2 |
RUBBER WASHER (Not shown) |
Footnotes
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
Copyright © 2008 by Briggs and Stratton Corporation 7 TP 400-7287-S-CI-S Milwaukee, WI, USA. All rights reserved
Engine & PTO Group
NOTE: Unless noted otherwise, |
287engb0 |
use the standard hardware torque |
|
specification chart. |
|
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
Copyright © 2008 by Briggs and Stratton Corporation 8 TP 400-7287-S-CI-S Milwaukee, WI, USA. All rights reserved
Engine & PTO Group
REF NO. PART NO. |
QTY. DESCRIPTION |
||
1 |
- |
- |
MAIN FRAME |
2 |
- |
1 |
ENGINE, 21HP Briggs & Stratton (Model 385777) |
2 |
- |
1 |
ENGINE, 23HP Briggs & Stratton (Model 386777) |
3 |
- |
1 |
CRANKSHAFT PULLEY |
4 |
5046845SM |
1 |
SPACER, 1.13 X 1.75 X .97 |
5 |
5023432SM |
1 |
CLUTCH |
6 |
5045475SM |
1 |
SPACER, .45 X 1.88 X .38 |
7 |
5044853SM |
1 |
BOLT, CRANKSHAFT, 7/16" X 2" |
8 |
5050407X28SM |
1 |
KEY, 1/4" SQ. X 3-1/2" |
9 |
5100361SM |
1 |
MUFFLER |
10 |
5061857CSM |
1 |
CLUTCH ANCHOR PLATE |
11 |
5047027SM |
2 |
SPACER, .51 X .75 X .56 |
12 |
5043636SM |
1 |
CLUTCH ANCHOR PAD |
13 |
5025155SM |
11 |
WASHER, 5/16" SAE |
14 |
1921333SM |
5 |
BOLT, 5/16-18 X 1" |
15 |
5044617SM |
3 |
WASHER, Clutch Anchor |
16 |
5025057SM |
3 |
NUT 5/16-18 Hex Nylon Lock |
17 |
5025392SM |
8 |
NUT, 5/16-18 Hex Nylock Flange |
18 |
5048681SM |
1 |
OIL DRAIN HOSE |
19 |
5021500SM |
1 |
CLAMP, Vinyl Insulated |
20 |
1923341SM |
1 |
BOLT, 1/4-20 X 3/4" |
21 |
5025126SM |
1 |
NUT, 1/4-20 Hex Serrated Flange |
22 |
1922127SM |
4 |
BOLT, 5/16-18 X 1-3/4" |
23 |
502501112SM |
2 |
BOLT, 5/16-18 X 1-1/2" |
24 |
5025188SM |
4 |
WASHER, 5/16" Internal Tooth Lock |
25 |
5021379SM |
1 |
GROMMET, 7/8" |
26 |
5101641SM |
1 |
SCREEN, SPARK ARRESTER (NOT SHOWN) |
Footnotes
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
Copyright © 2008 by Briggs and Stratton Corporation 9 TP 400-7287-S-CI-S Milwaukee, WI, USA. All rights reserved
Instrument Control Panel Group
NOTE: Unless noted otherwise, |
287ins0 |
use the standard hardware torque specification chart.
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
Copyright © 2008 by Briggs and Stratton Corporation 10 TP 400-7287-S-CI-S Milwaukee, WI, USA. All rights reserved
Instrument Control Panel Group
REF NO. PART NO. |
QTY. DESCRIPTION |
||
1 |
5022222SM |
1 |
SWITCH RETAINER RING |
2 |
5025039SM |
1 |
NUT, 3/8-24 Hex |
3 |
1703799SM |
1 |
SWITCH, LIGHT |
4 |
5025299X4SM |
3 |
SCREW, Allen Head, 1/4-20 x 1/2 |
5 |
5025010X5SM |
2 |
BOLT, 1/4-20 X 5/8" GD5 YZ (S/N: 2012617338 & Below) |
6 |
5025095SM |
2 |
NUT, 1/4-20 Hex Nylon Lock (S/N: 2012617338 & Below) |
7 |
1686734SM |
1 |
SWITCH, Ignition, Complete |
8 |
5046501SM |
1 |
CABLE, Choke Control, 47" |
9 |
1722887SM |
1 |
SWITCH, PTO |
10 |
5048231SM |
1 |
CABLE, Throttle Control, 40" (S/N: 2012617338 & Below) |
11 |
5100978SM |
1 |
HOURMETER, Digital |
12 |
5061361ASM |
1 |
CONTROL PANEL (S/N: 2012617338 & Below) |
13 |
5022269SM |
1 |
O-RING, 7/8" ID X 1/16" W |
14 |
5403402ASM |
1 |
PLATE, CONTROL PANEL - BLACK (S/N: 2012617339 & Above) |
15 |
5101118SM |
1 |
LEVER, THROTTLE CONTROL (S/N: 2012617339 & Above) |
16 |
5101073SM |
1 |
CABLE, THROTTLE, 42" (S/N: 2012617339 & Above) |
17 |
5046360X1SM |
1 |
KNOB, THROTTLE CONTROL (SV) (S/N: 2012617339 & Above) |
18 |
5025179X6SM |
2 |
SCREW, #10-24 X 3/4" ROUND PHILLIPS (S/N: 2012617339 & Above) |
19 |
5025271SM |
2 |
NUT, #10-24 HEX NYLON LOCK (S/N: 2012617339 & Above) |
Footnotes
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
Copyright © 2008 by Briggs and Stratton Corporation 11 TP 400-7287-S-CI-S Milwaukee, WI, USA. All rights reserved
Pump Drive Group
NOTE: Unless noted otherwise, |
287pdr0 |
use the standard hardware torque specification chart.
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
Copyright © 2008 by Briggs and Stratton Corporation 12 TP 400-7287-S-CI-S Milwaukee, WI, USA. All rights reserved
Pump Drive Group
REF NO. PART NO. |
QTY. DESCRIPTION |
||
1 |
- |
- |
MAIN FRAME |
2 |
5023254SM |
2 |
KEY, 5MM SQ. x 25MM w/ Round Ends |
3 |
5047075SM |
1 |
CRANKSHAFT PULLEY |
4 |
5100555SM |
1 |
BELT, PUMP DRIVE, BANDED |
5 |
1916950SM |
2 |
NUT, 3/8-16 Hex |
6 |
5021812SM |
1 |
EYE BOLT, 3/8-16 X 6" |
7 |
5025013X32SM |
1 |
BOLT, 3/8-16 X 4" |
8 |
5022157SM |
2 |
BUSHING, Brass |
9 |
5025394SM |
3 |
NUT, 3/8-16 Nylock Flange |
10 |
5025293SM |
1 |
WASHER, 3/8" GR. 9 FLAT |
11 |
5025013X18SM |
1 |
BOLT, 3/8-16 X 2-1/4" |
12 |
5025013X14SM |
1 |
BOLT, 3/8-16 X 1-3/4" |
13 |
5045475SM |
1 |
SPACER, .45 X 1.88 X.38 |
14 |
5025100SM |
1 |
NUT, 3/8-16 Hex Side Lock |
15 |
5022847SM |
1 |
SPRING, Extension, Swivel End |
16 |
5022621SM |
1 |
PULLEY, Idler (Single Flange) |
17 |
5046430CSM |
1 |
PUMP DRIVE IDLER ARM |
18 |
5045135SM |
1 |
SPACER, .39 X 1.00 X 2.55 |
19 |
5025305SM |
1 |
WASHER, 3/8 x 1-3/4 |
20 |
5025010X8SM |
4 |
BOLT, 1/4-20 X 1" |
21 |
5022586SM |
2 |
PULLEY, Pump Drive |
22 |
5022587SM |
2 |
BUSHING, Tapered Hub |
Footnotes
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
Copyright © 2008 by Briggs and Stratton Corporation 13 TP 400-7287-S-CI-S Milwaukee, WI, USA. All rights reserved
Motion Control Group - S/N: 201317250 & Below
NOTE: Unless noted otherwise, |
287mcg0 |
use the standard hardware torque specification chart.
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
Copyright © 2008 by Briggs and Stratton Corporation 14 TP 400-7287-S-CI-S Milwaukee, WI, USA. All rights reserved
Motion Control Group - S/N: 201317250 & Below
REF NO. PART NO. |
QTY. DESCRIPTION |
||
1 |
- |
- |
MAIN FRAME |
2 |
5025011X8SM |
6 |
BOLT, 5/16-18 X 1" |
3 |
5025170SM |
4 |
WASHER, 5/16" Lock |
4 |
5025155SM |
8 |
WASHER, 5/16" SAE |
5 |
5025213X10SM |
2 |
CLEVIS PIN, 3/8" X 1-1/4" |
6 |
5025211SM |
2 |
HAIRPIN CLIP |
7 |
5025011X10SM |
4 |
BOLT, 5/16-18 X 1-1/4" |
8 |
5025011X9SM |
4 |
BOLT, 5/16-18 X 1-1/8" |
9 |
5025013X20SM |
4 |
BOLT, 3/8-16 X 2-1/2" |
10 |
5025013X24SM |
2 |
BOLT, 3/8-16 X 3" |
11 |
5025156SM |
6 |
WASHER, 3/8" SAE |
12 |
5025394SM |
10 |
NUT, 3/8-16 Hex Nylock Flange |
13 |
5025096SM |
4 |
NUT, 3/8-16 Hex Nylon Lock |
14 |
5025010X6SM |
4 |
BOLT, 1/4-20 X 3/4" |
15 |
5025154SM |
4 |
WASHER, 1/4" SAE |
16 |
5025013X8SM |
2 |
BOLT, 3/8-16 X 1" |
17 |
5025013X10SM |
2 |
BOLT, 3/8-16 X 1-1/4" |
18 |
5025013X14SM |
4 |
BOLT, 3/8-16 X 1-3/4" |
19 |
5025179X4SM |
4 |
SCREW, #10-24 X 1/2" |
20 |
5025029SM |
4 |
NUT, #10-24 Hex |
21 |
5061838CSM |
2 |
MOTION CONTROL GUARD |
22 |
5021146SM |
2 |
BALL JOINT, 5/16-24 Female |
23 |
5046420SM |
2 |
HYDRO CONTROL ROD |
24 |
5023260SM |
2 |
BUSHING, Flange |
25 |
5049969SM |
2 |
NEUTRAL CONTROL ROD |
26 |
5021171SM |
2 |
CLEVIS, 3/8-24, Plastic |
27 |
5010546SM |
2 |
COLLAR, 3/8" Set |
28 |
5022645SM |
2 |
SPRING, Compression |
29 |
5025035SM |
2 |
NUT, 3/8-24 Hex |
30 |
5100728SM |
2 |
DAMPENER (S/N: 2012619803 & Below) |
31 |
5048264SM |
6 |
SPACER, .39 X .63 X 1.50 |
32 |
5049872CSM |
1 |
NEUTRAL LOCK PLATE, RH |
33 |
5049873CSM |
1 |
NEUTRAL LOCK PLATE, LH |
34 |
5022095SM |
2 |
SWITCH, Plunger, NO/NC |
35 |
5047004SM |
2 |
CONTROL ARM MOUNT |
36 |
5021499SM |
2 |
BEARING, Flange |
37 |
5022628SM |
2 |
BALL JOINT, 5/16-24 Female LH |
38 |
5023212SM |
2 |
NUT, 5/16-24 Hex LH |
39 |
5025033SM |
6 |
NUT, 5/16-24 Hex |
40 |
5022665SM |
4 |
BODY CLIP, 1/4-20 |
41 |
5025057SM |
2 |
NUT, 5/16-18 Hex Nylon Lock |
42 |
5025335SM |
4 |
BOLT, M8-1.25 x 35MM (S/N: 2012619803 & Below) |
43 |
5025354SM |
4 |
NUT, M8-1.25 Hex Nylon Lock (S/N: 2012619803 & Below) |
44 |
5025355SM |
4 |
NUT, M8-1.25 Hex Serrated Flange (S/N: 2012619803 & Below) |
Footnotes
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
Copyright © 2008 by Briggs and Stratton Corporation 15 TP 400-7287-S-CI-S Milwaukee, WI, USA. All rights reserved
Motion Control Group - S/N: 201317250 & Below
NOTE: Unless noted otherwise, |
287mcg0 |
use the standard hardware torque specification chart.
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
Copyright © 2008 by Briggs and Stratton Corporation 16 TP 400-7287-S-CI-S Milwaukee, WI, USA. All rights reserved
Motion Control Group - S/N: 201317250 & Below
REF NO. PART NO. |
QTY. DESCRIPTION |
||
45 |
5025139SM |
4 |
NUT, 5/16-18 Hex Large Serrated Flange |
46 |
1931277SM |
8 |
NUT, 5/16-18 Hex Small Serrated Flange |
47 |
5022068SM |
2 |
GRIP, Foam |
48 |
5021098SM |
2 |
BEARING, Flange |
49 |
5049843CSM |
1 |
CONTROL SHAFT, RH (S/N: 2012619803 & Below) |
50 |
5049842CSM |
1 |
CONTROL SHAFT, LH (S/N: 2012619803 & Below) |
51 |
5047056CSM |
1 |
MOTION CONTROL HANDLE, RH |
52 |
5047055CSM |
1 |
MOTION CONTROL HANDLE, LH |
53 |
- |
- |
HYDRAULIC PUMP |
54 |
5025392SM |
6 |
NUT, 5/16" -18 NYLOCK FLANGE |
55 |
5100940SM |
2 |
DAMPENER, CONTROL, #(P6709/P3610) (S/N: 2012619804 & Above) |
56 |
5100941SM |
4 |
BALL STUD, 5/16 X .50, (# PC-477-2) (S/N: 2012619804 & Above) |
57 |
5403640CSM |
1 |
WELD, CONTROL SHAFT, LH - ORG (S/N: 2012619804 & Above) |
58 |
5403641CSM |
1 |
WELD, CONTROL SHAFT, RH - ORG (S/N: 2012619804 & Above) |
Footnotes
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
Copyright © 2008 by Briggs and Stratton Corporation 17 TP 400-7287-S-CI-S Milwaukee, WI, USA. All rights reserved
Motion Control Group - S/N: 201317251 & Above
NOTE: Unless noted otherwise, |
5301479 |
use the standard hardware torque specification chart.
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
Copyright © 2008 by Briggs and Stratton Corporation 18 TP 400-7287-S-CI-S Milwaukee, WI, USA. All rights reserved
Motion Control Group - S/N: 201317251 & Above
REF NO. PART NO. |
QTY. DESCRIPTION |
||
1 |
5100947SM |
2 |
ROD, NEUTRAL RETURN |
2 |
5022645SM |
2 |
SPRING, REVERSE RETURN |
3 |
5023260SM |
2 |
BUSHING, NYLON |
4 |
5100942SM |
2 |
BUSHING, FLANGED .375 X .630 X 2.00 |
5 |
5010546SM |
4 |
COLLAR, 3/8" SET |
6 |
5025156SM |
2 |
WASHER, 3/8 SAE |
7 |
5025210SM |
2 |
PIN, HAIR, .0915 X 1-7/8 |
8 |
5100941SM |
4 |
BALL STUD, 5/16 X .50,# PC-477-2) |
9 |
5100940SM |
2 |
DAMPENER, CONTROL,#(P6709/P3610) |
10 |
5025392SM |
2 |
NUT, 5/16-18 HEX NYLOCK FLANGE |
11 |
5100946SM |
2 |
ROD, HYDRO LINKAGE |
12 |
5023212SM |
2 |
NUT, 5/16-24 HEX, LH |
13 |
5022628SM |
2 |
BALL JOINT, 5/16-24, LH FEMALE |
14 |
5402589CSM |
1 |
WELD, SHAFT MOTION CONTROL-RH-IS500-ORG |
15 |
5025011X8SM |
6 |
BOLT, 5/16-18 X 1 GD5 YZ |
16 |
5025155SM |
8 |
WASHER, 5/16" SAE |
17 |
5025011X10SM |
2 |
BOLT, 5/16-18 X 1-1/4" GD5 YZ |
18 |
5021146SM |
2 |
BALL JOINT, 5/16-24, FEMALE |
19 |
5025033SM |
6 |
NUT, 5/16-24 HEX |
20 |
5021098SM |
2 |
BEARING, BRONZE FLANGE, 3/4 |
21 |
5025013X8SM |
2 |
BOLT, 3/8-16 X 1" GD5 YZ |
22 |
5025394SM |
14 |
NUT, 3/8-16 HEX NYLOCK FLANGE |
23 |
5021499SM |
2 |
BEARING, FLANGE |
24 |
5025013X10SM |
2 |
BOLT, 3/8-16 X 1-1/4" GD5 |
25 |
5025096SM |
4 |
NUT, 3/8-16 HEX NYLON LOCK |
26 |
5025013X14SM |
8 |
BOLT, 3/8-16 X 1-3/4" GD5 |
27 |
5047004SM |
2 |
MOUNT, CONTROL ARM |
28 |
5402595CSM |
1 |
WELD, NEUTRAL LOCK - RH - IS500-ORG |
29 |
5402594CSM |
1 |
WELD, NEUTRAL LOCK - LH - IS500-ORG |
30 |
5022095SM |
2 |
SWITCH, PLUNGER, N.O./N.C. |
31 |
5025179X4SM |
4 |
SCREW, #10-24 X 1/2 ROUND PHILLIPS |
32 |
5025029SM |
4 |
NUT, #10-24 HEX |
33 |
5025011X9SM |
2 |
BOLT, 5/16-18 X 1-1/8" GD5 |
34 |
5025127SM |
8 |
NUT, 5/16-18 HEX SERRATED FLANGE (SMALL) |
35 |
5025013X20SM |
4 |
BOLT, 3/8-16 X 2-1/2" GD5 YZ |
36 |
5048264SM |
6 |
SPACER, .39 X .63 X 1.50 |
37 |
5025013X24SM |
2 |
BOLT, 3/8-16 X 3" GD5 YZ |
38 |
5047055CSM |
1 |
WELD, HANDLE MOTION CONTROL-LH |
39 |
5047056CSM |
1 |
WELD, HANDLE MOTION CONTROL-RH |
40 |
5025170SM |
4 |
WASHER, 5/16" LOCK |
41 |
5022068SM |
2 |
GRIP, FOAM, 3/4 ID, 16 LONG |
42 |
5100948SM |
2 |
GUARD, RUBBER MOT CTRS - IS500Z |
43 |
5025431SM |
4 |
PUSH RIVET (TREE TYPE), BLACK |
44 |
5020639SM |
2 |
SPRING, EXTENSION |
Footnotes
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
Copyright © 2008 by Briggs and Stratton Corporation 19 TP 400-7287-S-CI-S Milwaukee, WI, USA. All rights reserved
Motion Control Group - S/N: 201317251 & Above
NOTE: Unless noted otherwise, |
5301479 |
use the standard hardware torque specification chart.
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
Copyright © 2008 by Briggs and Stratton Corporation 20 TP 400-7287-S-CI-S Milwaukee, WI, USA. All rights reserved
Loading...