Sharp LC60LE757U, LC-70LE857U, LC-80LE857U, LC80LE757U, LC-70LE650U User Manual 2

...
0 (0)

OPERACIÓN DE MANUAL D'EMPLOI MODE MANUAL OPERATION

LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL

TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO

OPERATION MANUAL

MODE D’EMPLOI

MANUAL DE OPERACIÓN

IMPORTANT

: Please read this operation manual before

 

starting operating the equipment.

IMPORTANT

: Veuillez lire ce mode d’emploi avant de

 

commencer à utiliser l’appareil.

IMPORTANTE : Lea este manual de operación antes de comenzar a operar el equipo.

LC-80LE857U

LC-80LE650U

ENGLISH

LC-70LE857U

LC-70LE650U

 

LC-60LE857U

LC-60LE650U

 

LC-80LE757U LC-70C7500U

 

 

LC-70LE757U

LC-60C7500U

 

FRANÇAIS

LC-60LE757U

LC-80C6500U

 

LC-70LE755U LC-70C6500U

 

LC-60LE755U LC-60C6500U

 

 

LC-90LE657U

 

ESPAÑOL

 

 

LC-80LE657U

LC-70LE657U

LC-60LE657U

LC-70LE655U

LC-60LE655U

(Except for LC-90LE657U)

(for the LE857U, LE757U,

LE755U, LE657U and LE655U models)

2013/02/26 18:14:46

Skype™ is supported by this TV set. For details, refer to the following:

For the operation manual: http://www.sharpusa.com (USA) http://www.sharp.ca (Canada) http://www.sharp.com.mx (Mexico)

For information on the communication camera: http://freetalk.me/product/sharp/

For details on Skype: http://www.skype.com

Ce téléviseur est compatible avec Skype™. Pour les détails, reportez-vous à :

Pour le mode d’emploi : http://www.sharpusa.com (États-Unis) http://www.sharp.ca (Canada) http://www.sharp.com.mx (Mexique)

Pour des informations sur la caméra de communication : http://freetalk.me/product/sharp/

Pour les détails sur Skype : http://www.skype.com

Skype™ es compatible con este televisor. Para conocer más detalles, consulte:

Para el manual de operación: http://www.sharpusa.com (EE.UU.) http://www.sharp.ca (Canadá) http://www.sharp.com.mx (México)

Para obtener más información sobre la cámara de comunicación: http://freetalk.me/product/sharp/

Para conocer detalles de Skype: http://www.skype.com

LC-80LE857U_757U_657U_hyo1-4.indd 2

U.S.A. ONLY

IMPORTANT INFORMATION

IMPORTANT:

Model No.:

To aid reporting in case of loss or theft, please record the

 

TV's model and serial numbers in the space provided.

Serial No.:

The numbers are located at the rear and left side of the TV.

 

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with arrow-head symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment.

CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors

for connections.

DECLARATION OF CONFORMITY:

SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-80LE857U/LC-70LE857U/LC-60LE857U/ LC-80LE757U/LC-70LE757U/LC-60LE757U/LC-70LE755U/LC-60LE755U/LC-90LE657U/LC-80LE657U/ LC-70LE657U/LC-60LE657U/LC-70LE655U/LC-60LE655U/LC-80LE650U/LC-70LE650U/LC-60LE650U/ LC-70C7500U/LC-60C7500U/LC-80C6500U/LC-70C6500U/LC-60C6500U

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RESPONSIBLE PARTY:

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07495-1163 TEL: 1-800-BE-SHARP

For Business Customers: URL http://www.sharpusa.com

INFORMATION:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.

FCC Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Wireless Radio

For product available in the USA/Canada market, only channel 1–11 can be operated. Selection of other channels is not possible. This device is going to be operated in 5.15–5.25GHz frequency range, it is restricted in indoor environment only.

Important: Any changes or modifi cations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Industry Canada Statement

This Class B digital apparatus complies with CAN ICES-003(B)/NMB-3(B)

Wireless Radio

For product available in the USA/Canada market, only channel 1–11 can be operated. Selection of other channels is not possible.

The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure.

Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology.

Important: Any changes or modifi cations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IC Radiation Exposure Statement: This device complies with IC RSS-210 rules; Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept interference recieved, including interference that may cause undesired operation.

This product contains a CR Coin Lithium Battery which contains Perchlorate Material – special handling may apply, California residents,

See www.dtsc.ca.gov/hazardouswaste/perchlorate/

"Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820 of the National Electrical Code that provides guidelines for proper grounding and, in particular, specifi es that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical."

This product qualifi es for ENERGY STAR when "Home" is selected for "TV Location".

Setting "TV Location" to "Home" allows the TV to achieve an energy-saving status for household use. (Except for LC-90LE657U)

1

ENGLISH

LC-80LE857U_757U_657U_E.indd 1

2013/02/23 16:33:45

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DEAR SHARP CUSTOMER

Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product.

IMPORTANT SAFETY INSTRUCTIONS

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fi re. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your Liquid Crystal Television, please read the following precautions carefully before using the product.

1)Read these instructions.

2)Keep these instructions.

3)Heed all warnings.

4)Follow all instructions.

5)Do not use this apparatus near water.

6)Clean only with dry cloth.

7)Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifi ers) that produce heat.

9)Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11)Only use attachments/accessories specifi ed by the manufacturer.

12)Use only with the cart, stand, tripod, bracket, or table specifi ed by the manufacturer,

or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14)Refer all servicing to qualifi ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Additional Safety Information

15)Power Sources—This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

16)Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fi re or electric shock.

17)Object and Liquid Entry—Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fi re or electric shock. Never spill liquid of any kind on the product.

18)Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualifi ed service personnel under the following conditions:

a)When the AC cord or plug is damaged,

b)If liquid has been spilled, or objects have fallen into the product,

c)If the product has been exposed to rain or water,

d)If the product does not operate normally by following the operating instructions.

Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation,

2

IMPORTANT SAFETY INSTRUCTIONS

e) If the product has been dropped or damaged in any way, and

f ) When the product exhibits a distinct change in performance - this indicates a need for service.

19)Replacement Parts—When replacement parts are required, be sure the service technician has used replacement parts specifi ed by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fi re, electric shock, or other hazards.

20)Safety Check—Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

21)Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product according to the method recommended by the manufacturer.

Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.

Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the leadin wire to an antenna discharge unit, size of grounding conductors, location of antennadischarge unit, connection to grounding electrodes, and requirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE, ANSI/NFPA 70

 

 

ANTENNA LEAD

 

 

IN WIRE

 

GROUND

ANTENNA

 

CLAMP

 

DISCHARGE UNIT

 

 

 

 

(NEC SECTION 810-20)

ELECTRIC

 

 

SERVICE

 

GROUNDING CONDUCTORS

EQUIPMENT

 

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM

(NEC ART 250)

NEC — NATIONAL ELECTRICAL CODE

Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer's instructions. Use only the mounting hardware recommended by the manufacturer.

Selecting the location — Select a place with no direct sunlight and good ventilation.

Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insuffi cient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer's instructions are followed.

The front panel used in this product is made of glass. Therefore, it can break when the product is dropped or applied with impact. Be careful not to be injured by broken glass pieces in case the panel breaks.

Heat — The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifi ers) that produce heat.

The Liquid Crystal panel is a very high technology product with 2,073,600 pixels, giving you fi ne picture details.Occasionally, a few non-active pixels may appear on the screen as a fi xed point of blue, green, red or yellow (LE857U, LE757U, LE755U and C7500U models); blue, green or red (LE657U, LE655U, LE650U and C6500U models). Please note that this does not affect the performance of your product.

Lightning — For added protection for this television equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the equipment due to lightning and power-line surges.

Power Lines — An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

LC-80LE857U_757U_657U_E.indd 2

2013/02/21 13:35:57

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IMPORTANT SAFETY INSTRUCTIONS

To prevent fi re, never place any type of candle or fl ames on the top or near the TV set.

To prevent fi re or shock hazard, do not place the AC cord under the TV set or other heavy items.

• Do not display a still picture for a long time, as this could cause an afterimage to remain.

• To prevent fi re or shock hazard, do not expose this product to dripping or splashing.No objects fi lled with liquids, such as vases, should be placed on the product.

Do not insert foreign objects into the product. Inserting objects in the air vents or other openings may result in fi re or electric shock. Exercise special caution when using the product around children.

Precautions when transporting the TV

• When transporting the TV, never carry it by holding or otherwise putting pressure onto the display. Be sure to always carry the TV by two people (90/80 inch models: three people) holding it with two hands.

Caring for the cabinet

Use a soft cloth (cotton, fl annel, etc.) and gently wipe the surface of the cabinet.

Using a chemical cloth (wet/dry sheet type cloth, etc.) may deform the components of the main unit cabinet or cause cracking.

Wiping with a hard cloth or using strong force may scratch the surface of the cabinet.

If the cabinet is very dirty, wipe with a soft cloth (cotton, fl annel, etc.) soaked in neutral detergent diluted with water and thoroughly wrung out, and then wipe with a soft dry cloth.

Avoid using benzene, thinner, and other solvents, as these may deform the cabinet and cause the paint to peel off.

Do not apply insecticides or other volatile liquids.

Also, do not allow the cabinet to remain in contact with rubber or vinyl products for a long period of time. Plasticizers inside the plastic may cause the cabinet to deform and cause the paint to peel off.

Caring for the front panel

• Turn off the main power and unplug the AC cord from the wall outlet before handling.

• Gently wipe the surface of the front panel with a soft cloth (cotton, fl annel, etc.). To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry sheet type cloth, etc.). This may damage the surface of the front

panel.

• Wiping with a hard cloth or using strong force may scratch the surface of the front panel.

Use a soft damp cloth to gently wipe the front panel when it is really dirty.(It may scratch the surface of the front panel when wiped strongly.)

If the front panel is dusty, use an anti-static brush, which is commercially available, to clean it.

To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning cloths are available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD-CLOTH-3) packs. Call 1-800-BE-SHARP for ordering, or VISIT http://www.sharpusa.com/SharpDirect.

CHILD SAFETY:

PROPER TELEVISION PLACEMENT MATTERS

THE CONSUMER ELECTRONICS INDUSTRY CARES

Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable.

As you enjoy your television, please note that all televisions – new and oldmust be supported on proper stands or installed according to the manufacturer’s recommendations. Televisions that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, carts, etc., may fall over, resulting in injury.

TUNE IN TO SAFETY

ALWAYS follow the manufacturer’s recommendations for the safe installation of your television.

ALWAYS read and follow all instructions for proper use of your television.

NEVER allow children to climb on or play on the television or the furniture on which the television is placed.

NEVER place the television on furniture that can easily be used as steps, such as a chest of drawers.

ALWAYS install the television where it cannot be pushed, pulled over or knocked down.

ALWAYS route cords and cables connected to the television so that they cannot be tripped over, pulled or grabbed.

WALL OR CEILING MOUNT YOUR TELEVISION

ALWAYS contact your retailer about professional installation if you have any doubts about your ability to safely mount your television.

ALWAYS use a mount that has been recommended by the television manufacturer and has a safety certifi cation by an independent laboratory (such as UL, CSA, ETL).

ALWAYS follow all instructions supplied by the television and mount manufacturers.

ALWAYS make sure that the wall or ceiling where you are mounting the television is appropriate.

Some mounts are not designed to be mounted to walls and ceilings with steel studs or cinder block construction. If you are unsure, contact a professional installer.

Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount installation.

MOVING AN OLDER TELEVISION TO A NEW PLACE IN YOUR HOME

Many new television buyers move their older CRT televisions into a secondary room after the purchase of a fl at-panel television. Special care should be made in the placement of older CRT televisions.

ALWAYS place your older CRT television on furniture that is sturdy and appropriate for its size and weight.

NEVER place your older CRT television on a dresser where children may be tempted to use the drawers to climb.

ALWAYS make sure your older CRT television does not hang over the edge of your furniture.

CE.org/safety

3

LC-80LE857U_757U_657U_E.indd 3

2013/02/23 16:34:14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IMPORTANT SAFETY INSTRUCTIONS

 

Accessories

3D Glasses (for the LE857U, LE757U, LE755U and LE657U models) Prevention of accidental ingestion

Keep the accessory out of the reach of small children. Small children can accidentally swallow these parts.

– If a child accidentally swallows any of these parts, seek immediate medical attention.

Do not disassemble

Do not disassemble or modify the 3D Glasses except when recycling the batteries. Do not modify the 3D Glasses.

Handling the 3D Glasses

Do not drop, exert pressure on, or step on the 3D Glasses. Doing so may damage the glass section, which may result in the risk of injury.

Be careful not to trap your fi nger in the hinge section of the 3D Glasses. Doing so may result in injury.

– Pay special attention when children are using this product.

Caution for lithium battery

Batteries must not be exposed to excessive heat such as direct sunlight or fi re.

Replace only with the same or equivalent type of battery. The battery may explode if improperly replaced.

Take care not to reverse the battery poles (+ and –) when loading the battery. Follow the correct procedure when loading the battery. Loading the battery incorrectly may damage the battery or cause it to leak battery fl uid, which could result in a fi re, injury or damage.

Using the 3D Glasses

Use of the 3D Glasses should be limited to a maximum of 3 hours, and in any case no more than one movie.

Use only the 3D Glasses recommended for this TV.

Use the 3D Glasses only for the specifi ed purpose.

Do not move around while wearing the 3D Glasses. The surrounding area may appear dark, which may result in falling or other accidents that may cause injury.

Caring for the 3D Glasses

Use only the cloth provided with the 3D Glasses to clean the lenses. Remove dust and soil from the cloth. Any dust or other soiling on the cloth may result in scratches. Do not use solvents such as benzene or thinners as doing so may cause the coating to peel off.

When cleaning the 3D Glasses, take care not to allow water or other fl uids to come into contact with the glasses.

Always store the 3D Glasses in the case provided when not in use.

When storing the 3D Glasses, avoid very humid or hot locations.

Viewing 3D images

If you experience dizziness, nausea, or other discomfort while viewing 3D images, discontinue use and rest your eyes.

Do not use the 3D Glasses if they are cracked or broken.

WARNING

DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD

“This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.”

4

Supplied Accessories

Make sure the following accessories are provided with the product.

 

 

 

 

 

 

 

 

 

AC cord (x1)

Stand unit (x1)

Remote control unit (x1) "AAA" size battery (x2)

(for the 90/80 inch

(for LC-80LE857U)

 

 

models)

 

 

 

 

Page 10

Page 10

Page 9

Page 8

 

 

Stand unit (x1)

Stand unit (x1)

Stand unit (x1)

 

(for LC-70LE757U/LC-60LE757U/

(for LC-70LE857U/LC-60LE857U)

(for LC-80LE757U)

LC-70LE755U/LC-60LE755U/

 

 

 

LC-70C7500U/LC-60C7500U)

Page 6

Page 8

Page 6

 

Stand unit (x1) (for LC-80LE657U/

3D Glasses (x2)

Stand unit (x1)

LC-70LE657U/LC-60LE657U/

LC-70LE655U/LC-60LE655U/

(for the LE857U, LE757U, LE755U

(for LC-90LE657U)

LC-80LE650U/LC-70LE650U/

and LE657U models)

 

 

LC-60LE650U/LC-80C6500U/

 

 

LC-70C6500U/LC-60C6500U)

 

 

 

For details, refer to the operation

Page 9

Page 7 (for the 70/60 inch models)

manual.

Page 9 (for the 80 inch models)

 

 

 

Operation manual (this publication) Connection guide

Operation manual for the 3D Glasses (for the LE857U, LE757U, LE755U and LE657U models)

NOTE

Always use the AC cord supplied with the TV.

The illustrations above are for explanation purposes and may vary slightly from the actual accessories.

Optional Accessories

The listed optional accessories are available for the Liquid Crystal Television. Please purchase them at your nearest shop.

Additional optional accessories may be available in the near future. When purchasing, please read the newest catalogue for compatibility and check the availability.

Part name

Model number

Wall mount

AN-52AG4

bracket

(for LC-70LE857U/LC-60LE857U/

 

LC-70LE757U/LC-60LE757U/

 

LC-70LE755U/LC-60LE755U/

 

LC-70LE657U/LC-60LE657U/

 

LC-70LE655U/LC-60LE655U/

 

LC-70LE650U/LC-60LE650U/

 

LC-70C7500U/LC-60C7500U/

 

LC-70C6500U/LC-60C6500U)

3D Glasses

AN-3DG40 (for the LE857U, LE757U,

 

LE755U, LE657U and LE655U models)

LC-80LE857U_757U_657U_E.indd 4

2013/02/23 17:11:07

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Contents

IMPORTANT INFORMATION . . . . . . . . . . . . . . . . . . . 1 DEAR SHARP CUSTOMER . . . . . . . . . . . . . . . . . . . . . 2 IMPORTANT SAFETY INSTRUCTIONS . . . . . . 2-4

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . 4

Optional Accessories. . . . . . . . . . . . . . . . . . . . . . . . 4

QUICK REFERENCE

Attaching the Stand . . . . . . . . . . . . . . . . . . . . . . . 6-7

Attaching the Stand (for the 90/80 Inch

Models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9

QUICK INSTALLATION TIPS . . . . . . . . . . . . . . . . 9

Experiencing HD Images . . . . . . . . . . . . . . . . . . . . 9

Installing Batteries in the Remote Control

Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Using the Remote Control Unit . . . . . . . . . . . . . 10

Preparation

Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Part Names

TV (Front) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

TV (Side) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

TV (Rear). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Remote Control Unit . . . . . . . . . . . . . . . . . . . . . . . 12

Introduction to Connections

Types of Connection . . . . . . . . . . . . . . . . . . . . . . . 13 Displaying an External Equipment Image . . . 13

Connecting to External Equipment

Connecting a Blu-ray Disc/DVD Player or

HD Cable/Satellite Set-top Box . . . . . . . . . . . 14 Connecting a VCR, Game Console,

Camcorder or Cable/Satellite Set-top Box. . . 14 Connecting a Surround System/

Audio System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Connecting a PC. . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Watching TV

Turning On/Off the Power . . . . . . . . . . . . . . . . . . 16

Initial Installation. . . . . . . . . . . . . . . . . . . . . . . . 16-17

Direct Button Operation

Changing Channels . . . . . . . . . . . . . . . . . . . . 18 Changing Volume . . . . . . . . . . . . . . . . . . . . . . 18 MUTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 FREEZE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 INPUT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 FLASHBACK. . . . . . . . . . . . . . . . . . . . . . . . . . . 18 SmartCentral . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 NETFLIX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 AV MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Closed Captions and Digital Closed

Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 VIEW MODE . . . . . . . . . . . . . . . . . . . . . . . 20-21

On-Screen Display Menu

On-Screen Display Menu Operation . . . . . . . . 22

Menu Operation Buttons . . . . . . . . . . . . . . . . . . . 22

Menu Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Picture Settings . . . . . . . . . . . . . . . . . . . . . . . . 24-25

Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Power Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

System Options . . . . . . . . . . . . . . . . . . . . . . . . 26-28

Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-30

Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-32

Enjoying 3D Image Viewing (for the LE857U, LE757U, LE755U, LE657U and LE655U models)

Display Methods for 3D and 2D Images . . . . 33 Viewing 3D Images. . . . . . . . . . . . . . . . . . . . . 33-34 Configuring the TV Settings to Enhance

3D Image Viewing . . . . . . . . . . . . . . . . . . . . 34-35

Enjoying Photo/Music/Video Playback

Connecting a USB Memory Device/

USB Hard Drive . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Connecting a Home Network (DLNA) Server . . 36 Selecting the Folders to Play Back . . . . . . . . . 36 Playing Back Files on a USB Memory Device/ Home Network (DLNA) Server . . . . . . . . 37-39

Playing Back Files from a

Portable Device or PC. . . . . . . . . . . . . . . . . . . . 39

Other Viewing Options

Presetting Remote Control Function . . . . . . . . 40

Operating the Connected Equipment . . . . . . . 41

Using AQUOS LINK

Controlling HDMI Equipment

Using AQUOS LINK . . . . . . . . . . . . . . . . . . 41-42 Link Operation Menu . . . . . . . . . . . . . . . . . . . 42-43 Using a Smartphone with the TV . . . . . . . . . . . 43

Using a PC

Adjusting the PC Image . . . . . . . . . . . . . . . . . . . . 44

Setting Audio Input. . . . . . . . . . . . . . . . . . . . . . . . . 44

Control of the TV . . . . . . . . . . . . . . . . . . . . . . . 44-45

PC Compatibility Chart . . . . . . . . . . . . . . . . . . . . . 45

Using the Internet

Connecting to the Internet. . . . . . . . . . . . . . . . . . 46 Internet Setup. . . . . . . . . . . . . . . . . . . . . . . . . . 46-47 AQUOS Advantage Live. . . . . . . . . . . . . . . . . . . . 47 Entering Text (Software Keyboard) . . . . . . . . . 47 Using the Browser . . . . . . . . . . . . . . . . . . . . . 48-49 Using Keyboard and Mouse . . . . . . . . . . . . . . . . 49 Using Applications via the Internet . . . . . . . . . . 49

DISCLAIMERS . . . . . . . . . . . . . . . . . . . . . . . . . 50

Appendix

Removing the Stand . . . . . . . . . . . . . . . . . . . . . . . 51 Setting the TV on the Wall. . . . . . . . . . . . . . 52-53 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Troubleshooting - 3D Images (for the LE857U,

LE757U, LE755U, LE657U and LE655U models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Troubleshooting - Error Message. . . . . . . . . . . 55 Information on the Software License for

This Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Specifications

TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56-57

Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Calling for Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Dimensional Drawings

The dimensional drawings for the LCD TV set are shown on the inside back cover.

The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations.

The examples used throughout this manual are based on the LC-60LE650U model.

5

LC-80LE857U_757U_657U_E.indd 5

2013/02/23 16:34:14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

QUICK REFERENCE

Attaching the Stand

Before attaching (or detaching) the stand, unplug the AC cord.

Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.

CAUTION

• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.

NOTE

• Refer to pages 7 and 9 for the instructions on the installation of the 80 inch models.

■ LC-70LE857U/LC-60LE857U

1Confi rm that there are 9 screws (4 long screws, 4 middle screws and 1 short screw) supplied with the stand unit.

2Attach the supporting post for the stand unit onto the base as shown below.

The supporting post attaches to the base at an offcentered location on the base. Be sure to attach the supporting post in the direction indicated below and attach the stand to the TV with the wider side of the base facing forward.

Long screws

3Insert the stand into the openings on the rear of the TV.

Make sure that the stand is fi rmly inserted into the TV. Improper installation may result in tilting of the TV set.

Soft cushion

4Insert and tighten the 4 screws into the 4 holes on the rear of the stand unit.

Middle screws

51 Insert the stand cover.

2 Insert the screw to secure the stand cover.

Short screw

■ LC-70LE757U/LC-60LE757U/LC-70LE755U/

5 1 Insert the stand cover.

LC-60LE755U/LC-70C7500U/LC-60C7500U

2 Insert the 2 screws to secure the stand cover.

1Confirm that there are 12 screws (6 long screws, 4 middle screws and 2 short screws) supplied with the stand unit.

21 Set the post for the stand unit onto the polystyrene foam.

2 Attach the base to the post.

3 Insert and tighten the 6 screws into the 6 holes on the bottom of the base.

Hold the stand unit securely with one hand, and then tighten the screws.

Short screws

2

1 1

Long screws

3

2 1

1

FRONT

3Insert the stand into the openings on the rear of the TV.

Make sure that the stand is fi rmly inserted into the TV. Improper installation may result in tilting of the TV set.

Soft cushion

4Insert and tighten the 4 screws into the 4 holes on the rear of the stand unit.

Middle screws

6

LC-80LE857U_757U_657U_E.indd 6

2013/02/21 13:35:58

 

 

 

 

 

 

 

 

 

 

 

 

 

 

QUICK REFERENCE

LC-70LE657U/LC-60LE657U/LC-70LE655U/ LC-60LE655U/LC-70LE650U/LC-60LE650U/ LC-70C6500U/LC-60C6500U

1Confirm that there are 12 screws (8 long screws and 4 short screws) supplied with the stand unit.

21 Set the post for the stand unit onto the polystyrene foam.

2 Attach the base to the post.

3 Insert and tighten the 8 screws into the 8 holes on the bottom of the base.

Hold the stand unit securely with one hand, and then tighten the screws.

LC-70LE657U/LC-70LE655U/LC-70LE650U/ LC-70C6500U

31 Insert the stand into the openings on the bottom of the TV.

Make sure that the stand is fi rmly inserted into the TV. Improper installation may result in tilting of the TV set.

2 Insert and tighten the 4 screws into the 4 holes on the rear of the TV.

 

Soft cushion

2

Short screws

2

Long screws

3

1

1

2 1

1

FRONT

LC-60LE657U/LC-60LE655U/LC-60LE650U/ LC-60C6500U

Long screws

3

2

1 1

FRONT

In the installation procedure, be careful not to catch your fi ngers between the TV set and the fl oor.

Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.

• After attaching the stand to the TV, do not hold the stand when you put up, set up, move or lay down the TV.

Attaching the Stand (for the 90/80 Inch Models)

Building the Work Table

Before attaching the stand to the TV, build a work table on which to rest the TV.

To build the table, use the cushioning materials used in the packaging.

Of the cushioning materials used, TOP-C is also used during stand unit assembly. Be sure to assemble the stand unit before building the work table.

TOP-R TOP-L

TOP-C

FRONT

1Insert each of the cushioning materials in the respective directions shown in the fi gure.

Insert TOP-L and TOP-R into the left and right sides of the case respectively.

Insert TOP-C to fi t between the lines on the other side of the case.

 

TOP-R

TOP-L

CASE

 

LINE

TOP-C

2The case is equipped with push-in tabs to hold the cushioning materials in place. Push in the tabs (2 for each location) to secure the cushioning materials in the case.

Push-in tabs

■ LC-90LE657U

TOP-L

CASE

TOP-R

LINE

JOINT

TOP-C

Attach the joints and close the case.

1 Insert a joint into the hole on the side of the case. 2 Pressing the tab, fi x the joint into place.

1

2

3After you have built the work table, spread a blanket or similar soft cloth over the table and then lay the TV display down on the covered table before attaching the stand to the TV.

Do not use a small table for this.

Refer to the operation manual for information on attaching the stand.

7

LC-80LE857U_757U_657U_E.indd 7

2013/02/26 16:14:33

 

 

 

 

 

 

 

 

 

 

 

 

 

 

QUICK REFERENCE

Before attaching (or detaching) the stand, unplug the AC cord.

Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.

CAUTION

• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.

■ LC-80LE857U

1Confi rm that there are 14 screws (8 long screws, 4 middle screws and 2 short screws) supplied with the stand unit.

2Attach the supporting post for the stand unit onto the base as shown below.

The supporting post attaches to the base at an offcentered location on the base. Be sure to attach the supporting post in the direction indicated below and attach the stand to the TV with the wider side of the base facing forward.

61 Insert the stand cover.

2 Insert the screw to secure the stand cover.

Short screws

Long screws

3 Build the work table. (See page 7.)

4Insert the stand into the openings on the rear of the TV.

Make sure that the stand is fi rmly inserted into the TV. Improper installation may result in tilting of the TV set.

Soft cushion

5Insert and tighten the 4 screws into the 4 holes on the rear of the stand unit.

Middle screws

8

■ LC-80LE757U

6 1 Insert the stand cover.

1 Confirm that there are 12 screws (6 long screws,

2

Insert the 2 screws to secure the stand cover.

4 middle screws and 2 short screws) supplied

 

Short screws

with the stand unit.

 

 

2

2 1 Set the post for the stand unit onto the

 

 

 

polystyrene foam.

 

 

2 Attach the base to the post.

 

 

3 Insert and tighten the 6 screws into the 6

 

1

holes on the bottom of the base.

 

1

• Hold the stand unit securely with one hand,

 

 

 

and then tighten the screws.

 

 

Long screws

 

 

3

 

 

2

1 1

FRONT

3 Build the work table. (See page 7.)

4Insert the stand into the openings on the rear of the TV.

Make sure that the stand is fi rmly inserted into the TV. Improper installation may result in tilting of the TV set.

Soft cushion

5Insert and tighten the 4 screws into the 4 holes on the rear of the stand unit.

Middle screws

LC-80LE857U_757U_657U_E.indd 8

2013/02/21 13:35:58

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sharp LC60LE757U, LC-70LE857U, LC-80LE857U, LC80LE757U, LC-70LE650U User Manual 2

QUICK REFERENCE

LC-90LE657U/LC-80LE657U/LC-80LE650U/ LC-80C6500U

1Confirm that there are 12 screws (8 long screws and 4 short screws) supplied with the stand unit.

21 Set the post for the stand unit onto the polystyrene foam.

2 Attach the base to the post.

3 Insert and tighten the 8 screws into the 8 holes on the bottom of the base.

Hold the stand unit securely with one hand, and then tighten the screws.

LC-90LE657U

3

Long

screws

2

1

1

QUICK INSTALLATION TIPS

1Attach your antenna to the back of the television. (See page 10.)

2Connect the AC plug for the television into the AC outlet.

Place the TV close to the AC outlet, and keep the power plug within reach.

■ LC-80LE857U/LC-80LE757U

AC outlet

FRONT

■ LC-90LE657U/LC-80LE657U/LC-80LE650U/

LC-80C6500U

■ LC-80LE657U/LC-80LE650U/LC-80C6500U

Long

3

screws

 

2

 

 

1

1

*1

AC outlet

 

FRONT

3 Build the work table. (See page 7.)

41 Insert the stand into the openings on the bottom of the TV.

Make sure that the stand is fi rmly inserted into the TV. Improper installation may result in tilting of the TV set.

2 Insert and tighten the 4 screws into the 4 holes on the rear of the TV.

Short screws

Soft cushion

2

2

 

1

 

1

NOTE

*1: Be sure to use the clamp to prevent the AC cord from being unplugged.

(Except for LC-90LE657U)

LC-70LE657U/LC-70LE655U/LC-70LE650U/ LC-70C6500U

2

1 1

AC outlet

LC-60LE657U/LC-60LE655U/LC-60LE650U/ LC-60C6500U

1

1

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AC outlet

Bundle the cords properly with the cable tie.

When bundling the cords, use the AC cord holder mounted on the TV. Relocate from A to B .

■ LC-70LE857U/LC-60LE857U

Remove and loosen

A

1

2

 

2

1

1

1

B

Attach and bundle together

LC-70LE757U/LC-60LE757U/ LC-70LE755U/LC-60LE755U/ LC-70C7500U/LC-60C7500U

Remove and loosen

A

1

2

2

1

1

1

B

Attach and bundle together

NOTE

TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE AC CORD CONNECTED.

3When turning on the TV for the fi rst time, press POWER on the television.

POWER

4Insert the batteries into the remote control unit. (See page 10.)

NOTE

Speakers cannot be detached from the TV.

The TV angle cannot be adjusted.

Experiencing HD Images

An HDTV without an HD source is just an ordinary TV. To enjoy HD images on the TV, you should get HD programming from the following:

Over-the-air broadcasting via HD quality antenna

HD cable/satellite subscription

HD compatible external equipment

NOTE

For information on updating to HD programming, ask your cable/satellite service provider.

9

LC-80LE857U_757U_657U_E.indd 9

2013/02/26 19:46:49

 

 

 

 

 

 

 

 

 

 

 

 

 

 

QUICK REFERENCE

 

Preparation

Installing Batteries in the Remote

Control Unit

If the remote control fails to operate TV functions, replace the batteries in the remote control unit.

1 Open the battery cover.

2Insert two "AAA" size batteries (supplied with the product).

Place the batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment.

3 Close the battery cover.

CAUTION

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.

Do not mix batteries of different types. Different types of batteries have different characteristics.

Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old batteries.

Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can cause a rash. If you fi nd any chemical leakage, wipe thoroughly with a cloth.

The batteries supplied with this product may have a shorter life expectancy due to storage conditions.

If you will not be using the remote control unit for an extended period of time, remove batteries from it.

Using the Remote Control Unit

Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation.

Remote control sensor 30°

17´ (5 m)

30°

30°

30° *

* The angle is 6º when the stand is attached.

■ Cautions regarding the remote control unit

Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place it in an area with high humidity.

Do not install or place the remote control unit under direct sunlight. The heat may cause deformation of the remote control unit.

The remote control unit may not work properly if the remote control sensor on the TV is under direct

sunlight or strong lighting. In such cases, change the angle of the lighting or the TV, or operate the remote control unit closer to the remote control sensor.

IMPORTANT:

IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS.

IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.

Antennas

To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set. For connecting the antenna cable to the TV, use commercially available cables.

Connecting Antenna Cable

Connect the antenna cable to the TV using one of the methods in the illustration as shown (1, 2, 3 or 4).

1 Cable without a CATV converter

2 VHF/UHF antenna

3 Combination VHF/

UHF antenna

4 Separate VHF/UHF

antenna

 

Home Antenna

Cable TV lead-In

terminal (75-ohm)

 

 

Coaxial cable

Home Antenna 75-ohm coaxial cable (round) terminal (75-ohm)

Coaxial cable

75-ohm coaxial cable (round)

 

 

300-ohm twin-lead

 

or

 

 

 

 

 

 

300/75-ohm

 

 

 

 

cable (flat)

 

 

 

 

 

 

 

 

adapter

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

UHF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ANTENNA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VHF

 

300-ohm

 

 

 

 

 

 

 

 

 

 

 

ANTENNA

 

twin-lead cable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IN

 

 

OUT

 

 

To TV antenna

 

 

300-ohm twin-lead cable

 

 

Combiner

 

 

 

 

terminal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

or

75-ohm coaxial cable

 

 

 

 

 

 

 

 

 

 

 

1.A 75-ohm system is generally a round cable with F-type connector

F-type connector

that can easily be attached to a terminal without tools.

75-ohm coaxial cable (round)

2.A 300-ohm system is a fl at "twin-lead" cable that can be attached

 

to a 75-ohm terminal through a 300/75-ohm adapter.

 

NOTICE F-type connector should be finger-tightened only.

300-ohm twin-lead cable (fl at)

 

When connecting the RF cable to the TV set, do not tighten

F-type connector

F-type connector with tools.

 

If tools are used, it may cause damage to your TV set. (The

 

breaking of internal circuit, etc.)

75-ohm coaxial cable

10

LC-80LE857U_757U_657U_E.indd 10

2013/02/21 13:35:58

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Part Names

TV (Front)

Center Icon illumination (See page 27.)

OPC sensor *

Remote control sensor

* OPC: Optical Picture Control (See page 24.)

TV (Side)

POWER button

MENU button

INPUT button

Channel buttons (CHU/V)

Volume buttons (VOLk/l)

* See pages 13, 16, 22 and 27 for button operations.

TV (Rear)

*1

USB 2

Antenna/

Cable in

terminal *3

DIGITAL AUDIO

ETHERNET

OUT terminal

terminal

AUDIO IN terminal

 

 

(shared for PC IN

 

and HDMI IN 2) *2

*1

RS-232C terminal

PC IN terminal

VIDEO IN 2 terminals

VIDEO IN 1 terminals

COMPONENT IN terminals

*1

AUDIO OUT terminal

USB 1 terminal *3

HDMI IN 1 terminal

ARC: Audio Return Channel (See pages 41 and 42.)

HDMI IN 2 terminal

HDMI IN 3 terminal

HDMI IN 4 terminal

MHL: Mobile High-Definition Link (See page 43.)

*1 See pages 13 to 15 and 41 for external equipment connection. *2 See page 44 for details on the Audio Select function.

*3 Skype™ is available for the USB terminal. For details, refer to the following:

For the operation manual: http://www.sharpusa.com (USA) http://www.sharp.ca (Canada) http://www.sharp.com.mx (Mexico)

For information on the communication camera: http://freetalk.me/product/sharp/

For details on Skype: http://www.skype.com

11

LC-80LE857U_757U_657U_E.indd 11

2013/02/21 13:35:58

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Part Names

Remote Control Unit

LE857U, LE757U, LE755U, LE657U and LE655U models

13

■ LE650U, C7500U

and C6500U models

13

1

18

19 2

3

4 20 5 21

6

7 22

8 23

9

24

10

25

11

26

12

 

 

27

14

 

15

28

 

29

16

30

 

17

 

NOTE

• When using the remote control unit, point it at the TV.

12

1POWER: Switch the TV power on or enter standby. (See page 16.)

2TV, STB, DVD•VCR, AUDIO: Switches the remote control for TV, STB, BD, DVD, VCR and AUDIO operation. (See pages 40 to 41 for details.)

* To enter the code registration mode, you need to press an appropriate button (STB,

DVD•VCR or AUDIO) and DISPLAY at the same time.

3External equipment operational buttons:

Operate the external equipment.

4OPTION: Display the Link Operation Menu screen. This button will function only when AQUOS LINK is used. (See pages 41 to 43 for details.)

5 SLEEP: Set the sleep timer. (See page 19.)

6 0–9: Set the channel. (See page 18.)

7 • (DOT): (See pages 18 and 41.)

8CC: Display captions from a closed-caption source. (See page 20.)

9AV MODE: Select an audio or video setting. (See page 19.)

10MUTE: Mute the sound. (See page 18.)

11VOLk/l: Set the volume. (See page 18.)

12MENU: Display the menu screen. (See page 22.)

13LE857U, LE757U, LE755U, LE657U and LE655U models

3D: Select between 3D and 2D image viewing. (See pages 33 to 34 for details.)

LE650U, C7500U and C6500U models AAL: Display the AQUOS ADVANTAGE LIVE screen. (See page 47.)

14a/b/c/d, ENTER: Select a desired item on the screen.

15EXIT: Turn off the menu screen.

16FAVORITE CH: Set the favorite channels. (See page 28.)

17A, B, C, D: Select 4 preset favorite channels in 4 different categories. (See page 28.)

While watching, you can toggle the selected channels by pressing A, B, C and D.

18DISPLAY: Display the channel information.

19POWER (SOURCE): Turns the power of the external equipment on and off.

20FREEZE: Set the still image. Press again to return to normal screen. (See page 18.)

21AUDIO: Selects the MTS/SAP or the audio mode during multichannel audio broadcasts. (See page 19.)

22ENT: Jumps to a channel after selecting with the 0–9 buttons.

23FLASHBACK: Return to the previous channel or external input mode. (See page 18.)

24VIEW MODE: Select the screen size. (See pages 20 and 21.)

25INPUT: Select a TV input source. (TV, HDMI1, HDMI2, HDMI3, HDMI4, COMPONENT, VIDEO1, VIDEO2, PC IN, Home Network (DLNA), USB) (See pages 13 and 18.)

26CHU/V: Select the channel. (See page 18.)

27SmartCentral: Display the application window. (See page 18.)

28RETURN: Return to the previous menu screen.

29NETFLIX: Display the Netfl ix screen. (See page 19.)

30FAV APP 1, 2, 3: You can assign your favorite applications to these buttons. (See pages 47 to 49.)

LC-80LE857U_757U_657U_E.indd 12

2013/02/21 13:35:59

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Introduction to Connections

Types of Connection

For connecting the TV to external equipment, use commercially available cables.

• The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products.

■ Connecting to video equipment or PC

Image quality differs depending on the terminal used. To enjoy clearer images, check the output terminals of your external equipment and use its appropriate terminals for higher quality images.

Image

Terminal

Cable

Terminal on external

 

Quality

on the TV

equipment

 

 

 

HD

 

HDMI-certified cable

 

Pages

Quality

 

 

 

14, 15

 

 

 

 

 

 

Ø 3.5 mm stereo minijack cable

 

 

 

 

 

AUDIO

Pages

 

 

 

14, 15

 

 

 

 

 

 

DVI-HDMI conversion cable

DVI OUT

 

 

 

 

 

 

 

Component video cable

 

 

 

 

Audio cable

 

Page 14

 

 

 

 

Standard

 

AV cable

 

Page 14

 

 

 

Quality

 

 

 

 

 

 

 

■ Connecting to audio equipment

 

 

Terminal on the TV

Cable

Terminal on external

 

equipment

 

 

 

 

 

 

 

Optical fiber cable

 

Page 15

 

 

 

OPTICAL

 

 

 

DIGITAL AUDIO INPUT

 

 

 

Ø3.5 mm stereo minijack to RCA audio cable

 

Page 15

 

 

 

 

 

 

 

ANALOG AUDIO IN

 

Displaying an External Equipment Image

To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV.

INPUT

Example

Input Menu

AIR

INPUT

TV

HDMI1

HDMI2

1Press INPUT.

The INPUT list screen displays.

2Press a/b to select the input source.

You can also select the input source by pressing INPUT. Each time INPUT is pressed, the input source toggles.

HDMI1

HDMI2

HDMI3

TV HDMI4

An image from the selected source automatically displays.

If the corresponding input is not plugged in, you cannot change the input. Be sure to connect the equipment beforehand.

HDMI3

13

LC-80LE857U_757U_657U_E.indd 13

2013/02/21 13:35:59

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connecting to External Equipment

You can connect many types of external equipment to your TV. To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV. (See pages 13 and 18.)

For connecting the TV to external equipment, use commercially available cables.

CAUTION

To protect equipment, always turn off the TV before connecting any external equipment.

Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.

Connecting a Blu-ray Disc/DVD Player or HD Cable/Satellite Set-top Box

■ When using an HDMI cable (HDMI IN 1, 2, 3 or 4):

The HDMI (High Defi nition Multimedia Interface) terminal is an audio-video interface that enables a connection for audio and video signals using a single cable. The HDMI IN terminal supports high-resolution video input.

• Blu-ray disc player • DVD player

• HD cable/satellite set-top box

HDMI-certified cable

HDMI OUT

NOTE

To enjoy 1080p display capability, connect your external equipment using an HDMI-certifi ed cable or a component cable and set the equipment to 1080p output.

Supported Audio format: Linear PCM, Dolby Digital, DTS, sampling rate 32/44.1/48kHz.

When you connect ARC-compatible equipment, use HDMI IN 1.

■ When using a DVI-HDMI conversion cable (HDMI IN 2):

• Blu-ray disc player • DVD player

• HD cable/satellite set-top box

DVI-HDMI conversion cable

Ø 3.5 mm stereo minijack cable

AUDIO OUT DVI OUT

NOTE

When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to connecting a DVI-HDMI conversion cable to the HDMI IN 2 terminal, connect a Ø 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to "HDMI+Analog". (See page 44.)

14

■ When using a Component cable (COMPONENT IN):

• Blu-ray disc player • DVD player

• HD cable/satellite set-top box

Audio cable

AUDIO-R (Red)

AUDIO-L (White)

COMPONENT OUT

PR (Red)

Y (Green)

 

 

PB (Blue)

Component video cable

NOTE

To enjoy 1080p display capability, connect your external equipment using an HDMI-certifi ed cable or a component cable and set the equipment to 1080p output.

Connecting a VCR, Game Console, Camcorder or Cable/Satellite Set-top Box

■ When using a Composite cable (VIDEO IN 1 or 2):

• Game console

• VCR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Camcorder

• Cable/Satellite set-top box

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VIDEO (Yellow)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AV cable

 

 

 

 

AUDIO-L (White)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AUDIO-R (Red)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LC-80LE857U_757U_657U_E.indd 14

2013/02/21 13:35:59

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connecting to External Equipment

Connecting a Surround System/Audio System

■ When connecting an AV amplifier for a surround system

HD Cable/Satellite set-top box

HDMI-certified cable *1

 

 

HDMI OUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OPTICAL

 

 

 

DIGITAL AUDIO INPUT HDMI OUT HDMI IN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Optical fiber cable *2

 

 

 

 

• Letting the TV output the audio to an AV amplifi er:

*1

When you connect ARC-compatible equipment, use the HDMI IN 1 terminal.

*2

If the equipment to be connected is not compatible with the ARC, connect an optical fi ber cable.

NOTE

• If the image is not in sync with the audio, check the settings of the connected surround system.

■ When connecting an audio amplifier

It is possible to output audio through the DIGITAL AUDIO OUT terminal. (See page 26 for details.)

Optical fiber cable

OPTICAL

DIGITAL AUDIO INPUT

Ø3.5 mm stereo minijack to RCA audio cable

ANALOG AUDIO IN

NOTE

• See page 27 for details on the Output Select function.

Connecting a PC

Refer to page 45 for a list of PC signals compatible with the TV.

■ When using an HDMI cable (HDMI IN 1, 2, 3 or 4):

HDMI-certified cable

HDMI OUT

NOTE

Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certifi ed cable to the HDMI IN 2 terminal, connect a Ø 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to "HDMI+Analog". (See page 44.)

The HDMI IN terminals only support digital signal.

■ When using a DVI-HDMI conversion cable (HDMI IN 2):

DVI-HDMI conversion cable

DVI OUT

Ø 3.5 mm stereo minijack cable

AUDIO

NOTE

When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to connecting a DVI-HDMI conversion cable to the HDMI IN 2 terminal, connect a Ø 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to "HDMI+Analog". (See page 44.)

■ When using an analog RGB cable (PC IN):

Analog RGB cable

(D-sub 15-pin cable or VGA cable)

Ø 3.5 mm stereo minijack cable

AUDIO RGB

NOTE

When using an analog RGB cable, input the audio signal to the AUDIO IN terminal of PC IN.

When connecting a PC to the PC IN, set "Audio Select" to "Video+Audio". (See page 44.)

15

LC-80LE857U_757U_657U_E.indd 15

2013/02/21 13:35:59

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Watching TV

Turning On/Off the Power

POWER

POWER (On/Standby)

Press POWER on the TV or on the remote control unit to turn the power on.

NOTE

The Initial Installation starts when the TV powers on for the fi rst time. If the TV has been turned on before, the Initial Installation will not be invoked. For changing the settings of the Initial Installation, perform "EZ setup" on the Initial Setup menu on page 28.

Press POWER on the TV or on the remote control unit again to turn the power off.

The TV enters standby and the image on the screen disappears.

NOTE

If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.

Weak electric power is still consumed even when the TV is turned off.

16

Initial Installation

When you turn on the TV for the fi rst time, it will automatically memorize the broadcasting channels available in the region where you live. Perform the following steps before you press POWER on the remote control unit.

1.Insert the batteries into the remote control unit. (See page 10.)

2.Connect the antenna cable to the TV. (See page 10.)

3.Plug in the AC cord to the AC outlet. (See page 9.)

Language (Language setting)

Select from among 3 languages: English, French and Spanish.

1Press a/b to select the desired language listed on the screen, and then press ENTER.

Language

 

 

 

Location & Time

 

 

 

TV Location

 

English

 

Antenna & Cable/STB

 

 

 

 

Français

 

Air/Cable

 

 

 

Español

 

CH Search

 

 

 

 

 

 

Network

 

 

 

Completed

Location & Time

Make settings for the country, area and time zone where you use the TV.

2Press a/b to select "United States", "Canada" or "Mexico", and then press ENTER.

United States

Canada

Mexico

3Press a/b to select the time zone where you are using the TV, and then press ENTER.

Example

EST

CST

MST

PST

AKST

HAST

The time zone differs depending on the selected country.

The factory preset value is the time zone for the capital of the selected country.

4Press a/b to select the Daylight Savings Time, and then press ENTER.

Auto

Manual

Off

• "Auto" is the default selection.

TV Location

Select "Home" or "Store" for the location where you plan to install the TV. This product qualifi es for ENERGY STAR*1 in Home mode default setting.

5Press c/d to select "Home" or "Store". Press ENTER to enter the setting.

Select

Home

 

Store

Home: "Power Saving" is set to "Advanced", and AV MODE is set to "STANDARD (ENERGY STAR)*1".

Store: "Power Saving" is set to "Off" and AV MODE is set to "DYNAMIC (Fixed)". Picture Reset and Feature Demo can be set.

Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)" regardless of whether Picture Reset is "On" or "Off".

If you select "On" and there is no operation for 30 minutes:

-AV MODE will be reset to "DYNAMIC (Fixed)".

-When a 3D signal is detected, 3D images will switch to 2D images. (For the LE857U, LE757U, LE755U, LE657U and LE655U models)

When "Off" is selected:

-AV MODE will be set to "DYNAMIC (Fixed)". Feature Demo: When "On" is selected, after all

the settings are completed, the Feature Demo screen is displayed if there is no operation for several minutes.

NOTE

ENERGY STAR qualifi cation is based on AV MODE "STANDARD (ENERGY STAR)".*1

Antenna & Cable/STB

Select the type of connection you will use to watch TV.

6Press c/d to select "Antenna & Cable" or "Settop box", and then press ENTER.

 

 

 

 

 

 

Antenna & Cable

 

Set-top box

 

 

 

 

 

 

To watch TV via an antenna or cable connection (without using a set-top box):

Select "Antenna & Cable", and then go to step 7.

To watch TV via a set-top box:

1Select "Set-top box", and then press ENTER. 2Please make sure your set-top box is turnd on,

and then press ENTER.

3To watch TV, select the input source corresponding to the terminal connected to the set-top box. When doing so, you must make the setting to skip "TV". Press c/d to select "On", and then press ENTER.

 

 

 

 

 

 

On

 

Off

 

 

 

 

 

 

When this is set to "On", the channel on the TV cannot be changed using the remote control unit or menu. (e.g. CH U/V, Favorite CH, etc.)

See page 26 for details on the Input Skip

function.

4Press INPUT to select the input source corresponding to the terminal connected to the set-top box. Make the necessary settings on the connected external equipment.

See the operation manual of the connected equipment for setting up the equipment.

Air/Cable (Antenna setting)

Make sure what kind of connection is made with your TV when selecting "Air" or "Cable".

7Press c/d to select "Air" or "Cable".

Press ENTER to enter the setting.

 

 

 

 

 

 

Air

 

Cable

 

 

 

 

 

 

NOTE

• *1: Except for LC-90LE657U

LC-80LE857U_757U_657U_E.indd 16

2013/02/23 16:34:43

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Watching TV

CH Search (Channel search)

Channel auto search makes the TV look for all channels viewable in the set area.

8When "Air" is selected in Antenna setting:

Press c/d to select "Start", and then press ENTER.

 

 

 

 

 

 

Start

 

Cancel

 

 

 

 

 

 

When "Cable" is selected in Antenna setting:

1Press a/b to select "Analog & Digital Search Start" to search both analog and digital broadcasts, or to select "Analog Search Start" to search only analog broadcasts, and then press

ENTER.

Analog & Digital Search Start

Analog Search Start

Cancel

The Channel search will start automatically.

To exit the Channel search screen, select "Cancel", and then press ENTER.

2The Channel search results may include scrambled channels or channels that are not viewable in the set area. Press c/d to select "Yes", and then press ENTER to remove scrambled channels.

 

 

 

 

 

 

Yes

 

No

 

 

 

 

 

 

Network

When you connect to the Internet on the TV, select the desired connection method and follow the instructions shown on the display.

Wireless LAN connection is possible only when the WPS (push button) method is used. If any other method is used, make settings by Initial Setup > Internet Setup > Network Setup. (See pages 46 to 47.)

9Press c/d to select "Yes", and then press

ENTER.

 

 

 

 

 

 

Yes

 

No

 

 

 

 

 

 

10 Press a/b to select "Wired" or "Wireless", and then press ENTER.

Wired

Wireless

Connection using an ETHERNET cable:

1Select "Wired" and press ENTER.

2Confi rm that the TV is properly connected with the router, and then press "Next". Follow the instructions on the display to perform the connection test.

Wireless LAN connection by the WPS method:

1Select "Wireless" and press ENTER.

2Follow the instructions on the display, and fi nalize the connection after testing its viability.

NOTE

When you change the network settings, refer to Initial Setup > Internet Setup > Network Setup. (See pages 46 to 47.)

Completed

11 The settings confi rmation screen is displayed. Confi rm the information displayed on the screen, and then press ENTER.

Examples of the settings confirmation screen

When one or more channel is received after "Antenna & Cable" was selected in step 6 and a search was carried out.

Language

: English

Location & Time

: United States/EST/Auto

TV Location

: Home

Antenna & Cable/STB

: Antenna & Cable

Air/Cable

: Air

Search Result

: Digital 4ch

 

Analog 7ch

Network Connection

: Not completed

Press the INPUT button, then the right arrow d,

to see the list of channels found.

OK

When no channel is received after "Antenna & Cable" was selected in step 6 and a search was carried out.

Language

: English

Location & Time

: United States/EST/Auto

TV Location

: Home

Antenna & Cable/STB

: Antenna & Cable

Air/Cable

: Cable

Search Result

: No channel

Network Connection

: Not completed

Channel not found. Antenna/Cable are not properly connected

or Air/Cable setup is incorrect. Please check your Antenna/Cable connection

and Air/Cable setup.

OK

NOTE

If no channel is found, confi rm the type of connection made with your TV and try "EZ Setup" again. (See page 28.)

To see the list of channels found during Channel search, press INPUT, and then press d.

When "Set-top box" was selected in step 6.

Language

: English

Location & Time

: United States/EST/Auto

TV Location

: Home

Antenna & Cable/STB

: Set-top box

TV Input Skip

: Yes

Network Connection

: OK

OK

Click "OK" to display the confi rmation screen for input source switching.

Please make sure to select INPUT to the specific input terminal you are connecting your set-top box to get the picture. Closed caption, sub-channel audio

and channel selection need to be selected with your set-top box.

If you select "Show the Input List", the connection status of input source will be shown.

Please make sure the input position which your set-top box is connected.

 

Show the input list

 

OK

 

 

 

 

 

 

Show the input list: You can check the current connection status of external equipment. Confi rm which input terminal is connected to the set-top box.

OK: Clicking "OK" will complete the EZ Setup procedure.

HDMI 1

HDMI 2

HDMI 3

HDMI 4

COMPONENT

VEDEO 1

VEDEO 2

Not Available

Connected

Not Available

Not Available

Connected

Not Available

Connected

"Connected" is shown next to the name of input terminal which your set-top box or any other external equipment are connected to.

OK

This may not display correctly depending on the connected equipment.

This is not displayed correctly when the connected equipment is off.

To watch TV using a set-top box, press INPUT after completing the initial settings, and select the input to which the set-top box is connected.

NOTE

For changing the settings of the Initial Installation, perform "EZ setup" on the Initial Setup menu on page 28.

17

LC-80LE857U_757U_657U_E.indd 17

2013/02/21 13:36:00

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Direct Button Operation

Changing Channels

You can change channels in several ways.

Method 1

Using CHU/V on the remote control unit or on the TV.

Method 2

Using remote control buttons 0-9, • (DOT).

Examples:

To select a 1 or 2-digit channel number (e. g., Channel 5):

Press 5 ENT.

To select a 3-digit channel number (e. g., Channel 115):

Press 1 1 5 ENT.

To select a 4-digit channel number (e. g., Channel 22.1):

Press 2 2 • (DOT) 1 ENT.

Method 3

Selecting the program from the Channel list.

1 Press INPUT on the remote control unit.

• The INPUT list displays.

2 Press c/d to select "AIR" or "CABLE".

• The Channel list displays.

3 Press a/b to select the desired channel, and then press ENTER.

NOTE

• When selecting a 1-digit channel number, it is not necessary to press 0 before the number.

• When you enter 0-9 only, channel selection will be made if there is no operation within a few seconds.

• If you push "0" by itself, nothing will happen.

• Complete the above steps within a few seconds.

• When you enter 0-9 and • (DOT), channel selection will be made if there is no operation within a few seconds.

Changing Volume

You can change the volume by pressing VOLk/l on the TV or on the remote control unit.

• To increase the volume, press VOLk.

• To decrease the volume, press VOLl.

30

Audio status

Output Select

Output device

 

 

Fixed

Variable

 

Speaker

Variable sound

Mute

• When "Output Select" is set to "Variable", the indicator on the screen changes as shown below.

100

NOTE

• See page 27 for details on the Output Select function.

18

MUTE

Mutes the current sound output.

Press MUTE.

"" will be displayed on the screen for 30 minutes, and the sound is silenced.

NOTE

Within 30 minutes of pressing MUTE, mute can be canceled by pressing VOLk/l or MUTE.

Mute will be canceled after 30 minutes have passed. However, the TV will not suddenly output a loud sound as the volume level is set to 0 automatically.

FREEZE

Allows you to capture and freeze a moving image that you are watching.

Press FREEZE.

A moving image is captured.

Press FREEZE again to cancel the function.

NOTE

When this function is not available, "No displaying still image available." will display.

The still image automatically goes out after 30 minutes.

If you are using the freeze function and a broadcast activates the V-CHIP BLOCK, the freeze function will be canceled and a V-CHIP BLOCK message will appear.

You can have the same settings by choosing "Freeze" on the menu items. (See page 26.)

INPUT

To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV.

1Press INPUT.

The INPUT list screen displays.

2Press a/b or press INPUT again to select the input source.

An image from the selected source automatically displays.

Each time INPUT is pressed, the input source toggles.

If the corresponding input is not plugged in, you cannot change the input. Be sure to connect the equipment beforehand.

NOTE

See pages 13 to 15 and 41 for external equipment connection.

FLASHBACK

Press FLASHBACK to switch to the previously tuned channel or previous input mode.

Press FLASHBACK again to switch back to the currently tuned channel.

NOTE

FLASHBACK will not work if no channel has been changed after the TV is turned on.

SmartCentral

Allows you to directly activate various types of applications.

1Press SmartCentral to display the application window.

Press SmartCentral again to display a list of applications by category.

2Press c/d(or a/b) to select the desired application, and then press ENTER.

If you changed the display to the list of applications in step 1, select a category and then an application. See page 49 for details.

If "" is displayed after you switch to USB mode, check the USB connection.

If "" or " " is displayed after you switch to Home Network (DLNA) mode or after you connect to the Internet, check your TV’s network settings and connection.

NOTE

See pages 36, 47 to 49 for details of viewable applications.

You can display the application window by choosing "APPS" on the menu items. (See page 26.)

When this function is not available, "Can not operate this function now" will display.

LC-80LE857U_757U_657U_E.indd 18

2013/02/21 13:36:00

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Loading...
+ 46 hidden pages