Sennheiser e 912 S BK, e 912 S NX, 502193, 500875, 500876 User Manual

0 (0)
Sennheiser e 912 S BK, e 912 S NX, 502193, 500875, 500876 User Manual

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Mikrofone | evolution

Cat. No. 500876

General Description

The e 912 S is a high-quality, pre-polarized condenser microphone with half-cardioid pick-up pattern, acoustically optimized for picking up speech. Due to its unobtrusive, flat design, it is ideally suited for use on conference tables, altars and lecterns. The e 912 S can be switched on and off via an integrated membrane switch.

 

Technical Data

 

 

 

 

 

 

Transducer principle.....................................................

 

pre - polarised

 

 

 

condenser microphone

 

Frequency response .................................................

 

20 – 20 000 Hz

 

Transducer principle............................................

 

pressure gradient,

 

 

permanently polarized condenser

 

Pick-up pattern ..............................................................

 

half - cardioid

 

Sensitivity in free field,

 

 

 

no load (1kHz) .............................................................

 

6 (10) mV/Pa

 

 

Depending on adjusted

 

 

frequency response curve

 

Maximum sound pressure level (passiv)

............................ 134 dB

 

Dimensions .................................................

126.5 x 105 x 26.5 mm

 

 

(4.98“ x 4.13“ x 1.04“)

 

Weight .....................................................................

 

550 g (19.40 oz)

 

 

 

 

Features

JProgrammable membrane switch

JVery unobtrusive due to flat design

JExtremely rugged sound inlet basket

JRubber damping plate on base

JMounting slots for mounting the microphone to table tops, lecterns, etc.

JGold-plated XLR connector

JIntegrated electronics (instead of in-line preamp)

JAn internal DIP switch bank provides the following features: on/off (factory preset), push-to-talk button (PTT), cough button (PTM) or permanently switched on (ON)

JThe frequency response curve can be changed via a second DIP switch bank: low cut, low and high boost (factory preset), low boost or linear (see e 912).

JThe e 912 S has been optimized for picking up speech at relatively short distances, while the sister model e 916 has been designed for instrument pick up. For this reason, the frequency response curve of the e 912 S differs from that of the e 912.

JWith the e 912 S, you can obtain the frequency response curve of the e 912 by setting the DIP switch to the position lin (linear).

JDelivery Includes: Microphone e 912 S

Pouch

User guide

Variants

 

J e 912 S BK, black

Cat. No. 500875

J e 912 S NX, Nextel grey

Cat. No. 502193

 

 

 

 

 

30˚

0

30˚

 

 

5

 

 

 

 

 

 

 

10

 

 

 

60˚

15

 

60˚

 

 

 

 

 

 

20

 

 

 

 

25

 

 

90˚

dB

 

90˚

 

120˚

 

 

120˚

 

150˚

 

150˚

 

125

Hz

180˚

2000

Hz

 

250

Hz

 

4000

Hz

500

Hz

 

8000

Hz

1000

Hz

 

16000

Hz

-20

 

 

 

 

 

 

 

 

-30

 

 

 

 

 

 

 

 

-40

 

 

 

 

 

 

 

 

dBV

 

 

 

 

 

 

 

 

-50

 

 

 

 

 

 

 

 

-60

 

 

 

 

 

 

 

 

-70

 

 

 

 

 

 

 

 

50

100

200

500

1k

2k

5k

10k

20k

 

 

 

 

Hz

 

 

 

 

black

low und high boost (preset)

red

low cut (+ preset)

green

linear (e 912)

blue

low boost

e 912 S

Loading...