Sears 46L5200U, 24L4200U, 32L4200U, 19L4200U, 40L5200U User Manual

Integrated High Definition LED Television User’s Guide:

19L4200U 40L5200U 24L4200U 46L5200U 32L4200U 50L5200U

If you need assistance:

Toshiba's Support Web site support.toshiba.com

Call Toshiba Customer Support Center:

Within the United States at [phone]

Outside the United States at [phone]

For more information, see “Troubleshooting” on page 120 in this guide.

Owner's Record

The model number and serial number are on the back and side of your TV. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV

Model number: ______________________________________________

Serial number: _______________________________________________

Note: To display a High Definition picture, the TV must be receiving a High Definition signal (such as an over- the-air High Definition TV broadcast, a High Definition digital cable program, or a High Definition digital satellite program). For details, contact your TV antenna installer, cable provider, or satellite provider

GMA300009010

1/12

2

Dear Customer,

Thank you for purchasing this Toshiba LED TV. This manual will help you use the many exciting features of your new LED TV. Before operating your LED TV, carefully read this manual completely.

WARNING

To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. See item 26) on page 4.

WARNING: If you decide to wall mount this television, always use a mounting bracket that has been Listed by an independent laboratory (such as UL, CSA, ETL) and is appropriate for the size and weight of this television. The use of inappropriate or non-Listed mounting brackets could result in serious bodily injury and/or property damage. See “To Display your LED TV using a Wall Bracket:” on page 5.

NOTE TO CATV INSTALLERS

This is a reminder to call the CATV system installer’s attention to Article 820-40 of the U.S. NEC, which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. For additional antenna grounding information, see 33) and 34) on page 4.

CHILD SAFETY:

It Makes A Difference How and Where You Use Your Flat

Panel Display

Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:

The Issue

•The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands

or installed according to the manufacturer’s recommendations.

• Flat panel displays that are inappropriately situated on dressers,

bookcases, shelves, desks, speakers, chests or carts may fall over and cause injury.

TOSHIBA Cares!

• The consumer electronics industry is committed to making home

entertainment enjoyable and safe.

Tune Into Safety

•One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use of your flat panel display.

•Carefully read and understand all enclosed instructions for proper use of this product.

•Don’t allow children to climb on or play with furniture and television sets.

•Don’t place flat panel displays on furniture that can easily be used as steps, such

as a chest of drawers.

•Remember that children can become excited while watching a program, especially on a “larger than life” flat panel display. Care should be taken to place or install the display where it cannot be

pushed, pulled over, or knocked down.

•Care should be taken to route all cords and

cables connected to the flat panel display so that they cannot be pulled or grabbed by curious children.

Wall Mounting: If you decide to wall mount your flat panel display, always:

•Use a mount that has been recommended by the display manufacturer and/or listed by an independent laboratory (such as UL, CSA, ETL).

•Follow all instructions supplied by the display and wall mount manufacturers.

•If you have any doubts about your ability to safely install your flat panel display, contact your retailer about professional installation.

•Make sure that the wall where you are mounting the display is appropriate. Some wall mounts are not designed to be mounted to walls with steel studs or old cinder block construction. If you are unsure, contact a professional installer.

•A minimum of two people are required for installation. Flat panel displays can be heavy.

3

Important Safety Instructions

1)Read these instructions.

2)Keep these instructions.

3)Heed all warnings.

4)Follow all instructions.

5)Do not use this apparatus near water.

6)Clean only with dry cloth.

7)Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8)Do not install near any heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

9)Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding

prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10)Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11)Only use attachments/accessories specified by the manufacturer.

12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13)Unplug this apparatus during lightning storms or when unused for long periods of time.

14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Additional Safety Precautions

14a) CAUTION: If the TV is dropped and the cabinet or enclosure surface has been damaged or the TV does not operate normally, take the following precautions:

•ALWAYS turn off the TV and unplug the power cord to avoid possible electric shock or fire.

•NEVER allow your body to come in contact with any broken glass or liquid from the damaged television. The LCD panel inside the TV contains

glass and a toxic liquid. If the liquid comes in contact with your mouth or eyes, or your skin is cut by broken glass, rinse the affected area thoroughly with water and contact your doctor immediately.

•ALWAYS contact a service technician to inspect the TV any time it has been damaged or dropped.

15)CAUTION:

•To reduce the risk of electric shock, do not use the polarized plug with an extension cord, receptacle, or other outlet unless the blades can be inserted completely to prevent blade exposure.

•To prevent electric shock, match wide blade of plug to wide slot; fully insert.

16)CAUTION:

•Do not let children swallow any small parts included on or with the product or play with the plastic bag. Keep the small parts and the plastic bag out of the reach of children.

17)CAUTION:

•Do not let water or other liquids come into contact with the product, as it may result in damage.

18)WARNING:

•To prevent the spread of fire, keep candles or other open flames away from this product at all times.

•Keep the product away from direct sunlight, fire or a heat source such as a heater. This may reduce the product lifetime or result in fire.

Installation, Care, and Service

Installation

Follow these recommendations and precautions and heed all warnings when installing your TV:

19)WARNING: NEVER expose the batteries to excessive heat such as sunshine, fire, or the like.

20)ALWAYS plug the product into an outlet that is located in such a manner that it can be easily unplugged in case the product requires service.

21)NEVER route the product’s power cord inside a wall or similar enclosed area.

22)Never modify this equipment. Changes or modifications may void: a) the warranty, and b) the user’s authority to operate this equipment under the rules of the Federal Communications Commission.

23)DANGER: RISK OF SERIOUS PERSONAL INJURY, DEATH, OR EQUIPMENT DAMAGE!

Never place the TV on an unstable cart, stand, or table. The TV may fall, causing serious personal injury, death, or serious damage to the TV.

4

24)When selecting a location for the TV,

•NEVER allow any part of the TV to hang over the edge of the supporting furniture,

•NEVER place the TV on tall furniture (for example, entertainment centers or bookcases) without anchoring both the furniture and the TV to a suitable support,

•Never place cloth or other material between the TV and the supporting furniture.

•NEVER allow children to climb on the TV

25)To avoid damage to this product, never place or store the TV in direct sunlight; hot, humid areas; or areas subject to excessive dust or vibration.

26)Always place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit. To secure the TV, use a sturdy strap from the hook(s) on the rear of the TV to a wall stud, pillar, or other immovable structure. Make sure the strap is tight, secure, and parallel to the floor.

Sturdy strap (as short as possible)

4" min. Hook

TV side				TV top

27)The product shall not be exposed to dripping or splashing, and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

28)Never block or cover the slots or openings in the TV cabinet back, bottom, and sides. Never place the TV:

•on a bed, sofa, rug, or similar surface;

•too close to drapes, curtains, or walls; or

•in a confined space such as a bookcase, built-in cabinet, or any other place with poor ventilation.

The slots and openings are provided to protect the TV from overheating and to help maintain reliable operation of the TV. Leave a space of at least 4 (four) inches around the TV.

29)Always leave a space of at least 4 (four) inches around the TV. The slots and openings are provided to protect the TV from overheating and to help maintain reliable operation of the TV.

30)Never allow anything to rest on or roll over the power cord, and never place the TV where the power cord is subject to wear or abuse.

31)Never overload wall outlets and extension cords.

32)Always operate this equipment from a 120V AC, 60 Hz power source.

33)Always make sure the antenna system is properly grounded to provide adequate protection against voltage surges and built-up static charges (see Section 810 of the National Electric Code).

34)

DANGER: RISK OF SERIOUS

PERSONAL INJURY OR DEATH!

•Use extreme care to make sure you are never in a position where your body (or any item you are in contact with, such as a ladder or screwdriver) can accidentally touch overhead power lines.

Never locate the antenna near overhead power lines or other electrical circuits.

•Never attempt to install any of the following during lightning activity: a) an antenna system; or b) cables, wires, or any home theater component connected to an antenna or phone system.

Care

For better performance and safer operation of your TOSHIBA TV, follow these recommendations and precautions:

35)If you use the TV in a room whose temperature is 32° F (0° C) or below, the picture brightness may vary until the LED warms up. This is not a sign of malfunction.

36)WARNING: RISK OF SERIOUS PERSONAL INJURY, DEATH, OR EQUIPMENT DAMAGE!

•Never use chemicals (such as air fresheners, cleaning agents, etc.) on or near the TV pedestal. Studies indicate that plastics may weaken and crack over time from the combined effects of chemical agents and mechanical stress (such as the weight of the TV). Failure to follow these instructions could result in serious injury and/or permanent damage to TV and TV pedestal.

•Always unplug the TV before cleaning. Gently wipe the display panel surface (the TV screen) using a dry, soft cloth (cotton, flannel, etc.). A hard cloth may damage the surface of the panel. Avoid contact with alcohol, thinner, benzene, acidic or alkaline solvent cleaners, abrasive cleaners, or chemical cloths, which may damage the surface. Never spray volatile compounds such as insecticide on the cabinet. Such products may damage or discolor the cabinet.

37)Never hit, press, or place anything on the back cover. These actions will damage internal parts.

5

38)

WARNING:

RISK OF ELECTRIC SHOCK!

Never spill liquids or push objects of any kind into the TV cabinet slots.

39)During a lightening storm, do not touch the connecting cables or product.

40)For added protection of your TV from lightning and power surges, always unplug the power cord and disconnect the antenna from the TV if you leave the TV unattended or unused for long periods of time.

41)Always unplug the TV to completely disconnect from mains power. When the TV is turned off using the on/off switch, it is not completely disconnected from power and a minute amount of current is still consumed.

42)During normal use, the TV may make occasional snapping or popping sounds. This is normal, especially when the unit is being turned on or off. If these sounds become frequent or continuous, unplug the power cord and contact a Toshiba Authorized Service Provider.

43)WARNING: RISK OF SERIOUS PERSONAL INJURY OR EQUIPMENT DAMAGE!

Never strike the screen with a sharp or heavy object.

44)• The LCD screen of this product can be damaged by ultraviolet radiation from the sun. When selecting a location for the television, avoid locations where the screen may be exposed to direct sunlight, such as in front of a window.

•Never touch, press, or place anything on the LCD screen. These actions will damage the LCD screen. If you need to clean the LCD screen, follow the instructions in item 36), on page 4.

Service

45)

WARNING:

RISK OF ELECTRIC SHOCK!

Never attempt to service the TV yourself. Opening and removing the covers may expose you to dangerous voltage or other hazards. Failure to follow this WARNING may result in death or serious injury. Refer all servicing not specified in this manual to a Toshiba Authorized Service Provider.

46)If you have the TV serviced:

•Ask the service technician to use only replacement parts specified by the manufacturer.

•Upon completion of service, ask the service technician to perform routine safety checks to determine that the TV is in safe operating condition.

Choosing a location for your LED TV

To Display your LED TV on the included Pedestal Stand:

Observe the following safety precautions:

1)Read and follow the pedestal assembly instructions included with the pedestal.

CAUTION: Before beginning pedestal assembly, carefully lay the front of the LCD Panel face down on a flat, cushioned surface such as a quilt or blanket. Leave the bottom of the unit protruding over the edge of the surface and assemble the pedestal as indicated below.

Note: Extreme care should always be used when attaching the pedestal stand to avoid damage to the LCD panel.

2)Place the TV on a sturdy, level surface that can support the weight of the TV.

3)Be sure to secure the TV to a wall, pillar, surface, or other immovable structure see item 26) page 4 for additional details.

To Display your LED TV using a Wall Bracket:

If you decide to wall mount your LED TV, always use a wall bracket Listed by an independent laboratory (such as UL, CSA, ETL) that is appropriate for the size and weight of the TV:

1)CAUTION: Two people are required for installation.

2)Unplug and remove any cables and/or other component connectors from the rear of the TV.

3)Remove the screws of the VESA Mounting Pattern show in the table below.

CAUTION: Do not use the screws removed from the back cover to attach the wall mount bracket to the TV.

4)Always use the screws supplied or recommended by the wall mount manufacturer.

5)Follow the instructions provided with your wall bracket. Before proceeding, make sure the appropriate bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the wall bracket.

6)After attaching the appropriate bracket(s) to the wall and the back of the TV, remove the pedestal stand from the TV, as described below.

7)VESA Mounting Pattern

TV Size	Hole Pattern (HxV)	Screw Size
19”	100mm x 100mm	M4
24”	100mm x 100mm	M4
32”	100mm x 200mm	M4
40”	400mm x 400mm	M8
46”	400mm x 400mm	M8
50”	400mm x 400mm	M6
		(unit in mm)

6

Removing the Pedestal Stand

1)Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface.

Note: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel.

2)Remove the screws shown in the below diagram. This will allow removal of the pedestal stand.

3)Once you have removed the screws holding the pedestal stand in place, remove the pedestal stand from the TV.

19”/24” TV

VESA Mounting Pattern

Four screws

32” TV

VESA Mounting Pattern

Four screws	Hook Sturdy strap
	(as short as possible)

40”/46”/50” TV

VESA Mounting Pattern

Four screws	Hook
Four screws	Sturdy strap
	(as short as possible)

CAUTION: Always place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit. To secure the TV, use a sturdy strap from the hook(s) on the rear of the TV to a wall stud, pillar, or other immovable structure. Make sure the strap is tight, secure, and parallel to the floor.

7

FCC Declaration of Conformity

Compliance Statement (Part 15):

Toshiba 19L4200U, 24L4200U, 32L4200U, 40L5200U, 46L5200U, 50L5200U Television models comply with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference that may cause undesired operation.

The party responsible for compliance to these rules is: Toshiba America Information Systems, Inc.

9740 Irvine Blvd., Irvine, CA 92618. Ph: 800-631-3811

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by removing and applying power to the equipment, the user is encouraged to try to correct the interference by one of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications to this equipment not expressly approved by Toshiba could void the user's authority to operate this equipment.

ENERGY STAR® User Information

ENERGY STAR User Information Statement: the factory default settings of this television meet ENERGY STAR® requirements. Changing Picture Settings may increase energy consumption, possibly beyond the limits required for ENERGY STAR qualification.

To ensure your television is operating at optimal energy efficiency, select [Home] mode during initial activation. To return to [Home] mode settings, select [Standard] picture mode. [Standard] mode is recommended for normal home use.

ENERGY STAR® qualified TV. Products that earn the ENERGY STAR prevent green house gas emissions by meeting strict guidelines set by the U.S. Environmental Protection Agency. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks.

Important notes about your TV

The following symptoms are technical limitations of LCD Display technology and are not an indication of malfunction; therefore, Toshiba is not responsible for perceived issues resulting from these symptoms.

1)An afterimage (ghost) may appear on the screen if a fixed, non-moving image appears for a long period of time. The afterimage is not permanent and will disappear in a short period of time.

2)The LCD panel contained in this TV is manufactured using an extremely high level of precision technology; however, there may be an occasional pixel (dot of light) that does not operate properly (does not light, remains constantly lit, etc.). This is a structural property of LCD technology, is not a sign of malfunction, and is not covered under your warranty. Such pixels are not visible when the picture is viewed from a normal viewing distance.

Note: Interactive video games that involve shooting a “gun” type of joystick at an on-screen target may not work with this TV.

8

Trademark Information

•ClearFrame, CableClear, ColorStream, DynaLight, GameTimer, SurfLock are trademarks or registered trademarks of Toshiba America Information Systems, Inc. and/or Toshiba Corporation.

•Audyssey EQ® provides clear, accurate, and natural sound right out of the box.

This technology ensures you enjoy your audio experience as much as your video.

•Audyssey ABX™ technology uses sophisticated driver analysis and low

frequency monitoring to extend the range and bass of small speakers. This enables the system to produce lower frequencies than would be possible with a traditional system of the same size.

•Audyssey Dynamic Volume® automatically

adjusts volume to provide a consistent sound level between television programs,

commercials, and between the loud and soft passages of movies.

•Manufactured under license from Audyssey

Laboratories, Inc. U.S. and foreign patents pending. Audyssey EQ®, Audyssey ABX™, and Audyssey Dynamic Volume® are registered and licensed trademarks of Audyssey Laboratories, Inc.

•Manufactured under license from Dolby Laboratories. Dolby and the double-D

symbol are trademarks of Dolby Laboratories.

•HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

•MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.

•This production contains Bitstream Vera Sans fonts under the following copyright: Copyright © 2003 by Bitstream, Inc. All Rights Reserved. Bitstream Vera is a trademark of Bitstream, Inc.

Copyright

This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.

©2012 by Toshiba America Information Systems, Inc. All rights reserved.

Notice

The information contained in this manual, including but not limited to any product specifications, is subject to change without notice.

TOSHIBA CORPORATION AND TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (TOSHIBA) PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL OR ANY OTHER INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO ANY OF THE FOREGOING. TOSHIBA ASSUMES NO LIABILITY FOR ANY DAMAGES INCURRED DIRECTLY OR INDIRECTLY FROM ANY TECHNICAL OR TYPOGRAPHICAL ERRORS OR OMISSIONS CONTAINED HEREIN OR FOR DISCREPANCIES BETWEEN THE PRODUCT AND THE MANUAL. IN NO EVENT SHALL TOSHIBA BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, OR EXEMPLARY DAMAGES, WHETHER BASED ON TORT, CONTRACT OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL OR ANY OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF.

Contents
Chapter 1: Introduction..............................................................	15
Features ..................................................................	16
Overview of installation, setup, and use..................	17
TV front and side panel controls and
connections ......................................................	18
TV back panel connections .....................................	19
Chapter 2: Connecting Your TV................................................	21
Overview of cable types ..........................................	21
Coaxial (F-type) cable ......................................	21
Standard A/V cables (red/white/yellow) ............	22
Component video cables (red/green/blue) ........	22
HDMI® cable
(with HDMI Logo) .......................................	22
Optical audio cable............................................	23
Analog RGB (15-pin) computer cable ...............	23
3.5mm Stereo to RCA Y-cable ..........................	23
About the connection illustrations ....................	23

9

10	Contents
	Connecting a VCR, antenna, cable TV, or
	camcorder.........................................................	24
	Connecting a DVD player with ColorStream®
	(component video), and a satellite receiver.......	25
	Connecting an HDMI® or DVI device to
	the HDMI® input................................................	28
	HDMI®-CEC connection ..........................................	31
	Connecting a digital audio system ..........................	33
	Connecting an analog audio system .......................	35
	Connecting a computer...........................................	35
	Connecting a computer to the TV’s
	PC IN terminal.............................................	35
	Connection to the TV’s HDMI® terminal............	37
Chapter 3: Using the Remote Control......................................		40
	Installing batteries ..................................................	40
	Remote control effective range ...............................	41
	Learning about the remote control..........................	42
Chapter 4: Menu Layout and Navigation.................................		45
	Main menu layout ...................................................	45
	Setup/Installation menu layout ...............................	47
	Navigating the menu system...................................	47
Chapter 5: Setting up your TV...................................................		49
	Initial Setup.............................................................	49
	Storing channels in memory (optional)...................	51
	Auto Tuning ......................................................	51
	Setting channel skip................................................	54
	Setting the AV input mode ......................................	55
	Setting the HDMI® audio mode...............................	55
	Viewing the digital signal meter ..............................	56
	Setting the time zone ..............................................	57
	Viewing the system status ......................................	57
	Resetting Factory Defaults ................................	58

Contents	11
Chapter 6: Using the TV’s features...........................................	59
Selecting the video input source .............................	59
Labeling the video input sources ............................	61
Tuning channels using the Channel Browser ..........	64
Favorites browser .............................................	65
Elements of the Channel Browser .....................	66
Adding and clearing channels and inputs
in the History List........................................	68
Tuning to the next programmed channel ..........	68
Tuning to a specific channel (programmed
or unprogrammed) .....................................	69
Switching between two channels using
Channel Return ...........................................	69
Switching between two channels using
SurfLock™ ..................................................	69
Selecting the picture size ........................................	70
Full ....................................................................	71
TheaterWide 1...................................................	72
TheaterWide 2...................................................	72
TheaterWide 3...................................................	73
Native................................................................	73
4:3 ....................................................................	74
Normal ..............................................................	74
Dot by Dot.........................................................	74
Scrolling the TheaterWide® picture
(TheaterWide 2 and 3 only)...............................	75
Using the Auto Aspect feature.................................	76
Selecting the cinema mode .....................................	77
Using the FREEZE feature .......................................	77
Adjusting the picture...............................................	78
Selecting the picture mode ...............................	78
Adjusting the picture quality .............................	79
Using closed captions.............................................	80
Base closed captions ........................................	80
Digital CC settings.............................................	81

12	Contents
	CC Selector .......................................................	82
	Adjusting the audio .................................................	83
	Muting the sound..............................................	83
	Using the digital audio selector.........................	83
	Selecting stereo/SAP broadcasts ......................	84
	Adjusting the audio quality................................	85
	Audyssey ABX™ ...............................................	86
	Using Dynamic Volume (Audyssey Dynamic
	Volume®) ....................................................	86
	Selecting the optical audio output format .........	86
	Using the Dolby® Digital Dynamic Range
	Control feature ............................................	87
	Using the Locks menu ............................................	87
	Entering the PIN code .......................................	88
	Forgotten PIN code ...........................................	89
	Changing or deleting your PIN code .................	89
	Using parental controls (for USA region)................	89
	Blocking TV programs and movies by
	rating (V-Chip) ............................................	89
	Downloading an additional rating system .........	90
	Displaying ratings .............................................	93
	Blocking TV programs by Canada rating ...........	93
	Unlocking programs temporarily ......................	95
	Using the input lock feature ....................................	95
	Locking channels ....................................................	96
	Using the GameTimer® .....................................	97
	Using the panel lock feature..............................	97
	Using the PC settings feature..................................	98
	Setting the PC Audio .........................................	99
	Using the Media Player .........................................	100
	Auto Start function..........................................	101
	To open the Media Player ...............................	101
	Viewing photo files .........................................	103
	Playing music files ..........................................	104
	Viewing photo files and playing music
	files at the same time ................................	105

	13
Contents
Sorting photo or music files ...........................	106
Setting the sleep timer ..........................................	107
Automatic Power Down ........................................	108
No Signal Power Down .........................................	108
Using HDMI®-CEC.................................................	109
HDMI®-CEC playback device (DVD
player, etc.) control...................................	109
Other HDMI®-CEC functions ...........................	111
Setting up HDMI®-CEC....................................	112
Displaying TV status information ..........................	112
Understanding the last mode memory feature ......	113
Chapter 7: Using the TV’s Advanced Features ......................	114
Using the advanced picture settings .....................	114
Dynamic Contrast ...........................................	114
Static Gamma .................................................	115
Color temperature ...........................................	115
ClearFrame™ (L5200U Series)........................	116
Film Stabilization (L5200U Series)..................	117
CableClear® digital Noise Reduction ...............	118
MPEG Noise Reduction...................................	118
Game Mode ....................................................	119
Chapter 8: Troubleshooting.....................................................	120
General troubleshooting........................................	120
Picture problems ..................................................	121
Sound problems ...................................................	123
Remote control problems .....................................	123
Channel tuning problems ......................................	124
Closed caption problems ......................................	124
Rating blocking (V-Chip) problems.......................	124
No HDMI®-CEC operation .....................................	125
HDMI® problems...................................................	125
Media Player problems .........................................	125
If the problem persists after trying the
solutions .........................................................	125

14	Contents
Appendix A: Specifications......................................................		126
	Television system .................................................	126
	Channel coverage..................................................	126
	Power source........................................................	127
	Power maximum current ................................	127
	Power consumption........................................	127
	Audio power....................................................	127
	Speaker type .........................................................	128
	Video/audio terminals ...........................................	128
	Video/audio input............................................	128
	ColorStream® (component video)
	HD input....................................................	128
	HDMI® input ...................................................	128
	Digital audio output.........................................	128
	PC input ..........................................................	128
	Dimensions...........................................................	129
	Mass (weight) .................................................	129
	Operating conditions.......................................	129
	Supplied accessories ............................................	130
	Acceptable signal formats for PC IN, HDMI® ........	130
	PC IN signal formats .......................................	130
	HDMI® signal formats.....................................	130
Appendix B: License Agreement.............................................		132
Index..........................................................................................		136

Chapter 1

Introduction

Safety icons

This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows:

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, may result in property damage.

NOTE Provides important information.

15

16 Introduction

Features

Features

The following are just a few of the many exciting features of your new Toshiba wide screen, integrated HD, LED TV:

Integrated digital tuning (8VSB ATSC and QAM)—

Eliminates the need for a separate digital converter set-top box (in most cases).

1366 x 768 output resolution 19L4200U, 32L4200U.

1920 x 1080 output resolution 24L4200U, 40L4200U, 46L5200U, and 50L5200U.

Three HDMI® (L5200U Series) Two HDMI® (L4200U Series)

—Digital, High-Definition Multimedia Interfaces with 1080p input support. See “Connecting an HDMI® or DVI device to the HDMI® input” on page 28

ColorStream® HD—High-resolution component video input and shared composite video input, see “Connecting a DVD player with ColorStream® (component video), and a satellite receiver” on page 25

Digital Audio Out—Optical audio connection with Dolby® Digital optical output form. “Connecting a digital audio system” on page 33

CableClear®—digital picture Noise Reduction, see “CableClear® digital Noise Reduction” on page 118.

PC IN (Analog RGB)—Computer terminal, see “Connecting a computer to the TV’s PC IN terminal” on page 35.

HDMI®-CEC—Allows control of external devices from the TV remote via HDMI® connection, see “Using HDMI®-CEC” on page 109.

ClearFrameTM 120 Hz anti-blur feature (for L5200U Series), see “ClearFrame™ (L5200U Series)” on page 116.

Media Player—Allows you to view photo files and play music files, see “Using the Media Player” on page 100.

ENERGY STAR® qualified.

Introduction 17

Overview of installation, setup, and use

Overview of installation, setup, and use

Follow these steps to set up your TV and begin using its many exciting features.

1Carefully read the important safety, installation, care, and service information. Keep this manual for future reference.

2To choose a location for the TV:

Read “Important notes about your TV” on page 7.

Place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit. Secure the TV to a wall, pillar, or other immovable structure, see 25) on page 4.

Place the TV in a location where light does not reflect on the screen.

Place the TV far enough from walls and other objects to allow proper ventilation. Inadequate ventilation may cause overheating, which will damage the TV. THIS TYPE OF DAMAGE IS NOT COVERED UNDER THE TOSHIBA WARRANTY.

3Do not plug in any power cords until after you have connected all cables and devices to your TV.

4Before connecting cables or devices to the TV, learn the functions of the TV’s connections and controls, see “Overview of cable types” on page 21.

5Connect your other electronic device(s) to the TV, see “Connecting an HDMI® or DVI device to the HDMI® input” on page 28.

6Install the batteries in the remote control, see “Installing batteries” on page 40.

7See “Learning about the remote control” on page 42 for an overview of the buttons on the remote control.

8After connecting all cables and devices, plug in the power cords for your TV and other devices. Then press the POWER button on the TV control panel or remote control to turn on the TV. If the TV stops responding to the buttons on the remote control or TV control panel and you cannot turn the TV off or on, unplug the power cords for a few seconds and then plug them in and try again.

9See “Navigating the menu system” on page 47 for a quick overview of navigating the TV’s menu system.

18	Introduction
	TV front and side panel controls and connections

10Program channels into the TV’s channel memory, see “Auto Tuning” on page 51.

11For details on using the TV’s features, see chapters 6 and 7.

12For help, refer to “Troubleshooting” on page 120.

13For technical specifications, see “Specifications” on page 126.

14For the End User License Agreement, see “License Agreement” on page 132

TV front and side panel controls and connections

Left side panel

TV front

TV top

(Sample Illustration) L4200U Series front and side panel controls and connections

Left side panel

TV front

TV top

3

2

1

(Sample Illustration) L5200U Series front and side panel controls and connections

1Power On/Standby LED—Power indicator light, (glows green when the TV power is On).

2Remote sensor (embedded)—Point the remote control toward this remote sensor.

Introduction	19
TV back panel connections

3POWER—Turns the TV On/Off. If the TV stops responding to the buttons on the remote control or TV control panel and you cannot turn off the TV, press and hold the POWER button on the TV control panel for a few seconds to reset the TV.

4ARROWS /// —When a menu is onscreen, these buttons function as up/down/left/right menu navigation buttons.

5MENU (ENTER)—Accesses the on-screen menus. When a menu is displayed, this button also functions as the ENTER button.

6EXIT—Instantly closes an onscreen menu.

7CHANNEL /—When no menu is onscreen, these buttons change the channel (programmed channels only, see “Storing channels in memory (optional)” on page 51).

8VOLUME buttons /—When no menu is onscreen, these buttons adjust the volume level.

9INPUT—Changes the source you are viewing. Press repeatedly to change from one source to the next.

10USB port (L5200U Series)—Accesses JPEG or MP3 files, or updates TV firmware.

TV back panel connections

For explanations of cable types and connections, see “Overview of cable types” on page 21.

(Sample Illustration) L4200U Series back panel connections

20	Introduction
	TV back panel connections

	1
	2
	3
	4
8	7
Power Cord	5
	6

(Sample Illustration) L5200U Series back panel connections

1PC IN—Connects a personal computer.

2HDMI® IN—High-Definition Multimedia Interface input

receives digital audio and uncompressed digital video from an HDMI® device or uncompressed digital video from a DVI device. HDMI® connection is necessary to receive 1080p signals.

3PC/HDMI-1 (Audio) IN—PC audio input terminal is shared with an HDMI-1 analog audio input terminal, and its use can be configured in the Audio Setup menu, see “Setting the PC Audio” on page 99.

4ANT/CABLE—Antenna input that supports analog (NTSC) and digital (ATSC) off-air antenna signals and analog and digital cable TV (QAM) signals.

5Digital AUDIO OUT—Optical audio output in Dolby® Digital or PCM (pulse-code modulation) format for connecting an external Dolby Digital decoder, amplifier, or home theater system with optical audio input.

6ANALOG AUDIO OUT—Analog audio outputs for connecting an audio amplifier.

7ColorStream® HD—High-resolution component video input and shared composite video input, see “Connecting a DVD player with ColorStream® (component video), and a satellite receiver” on page 25.

8USB port—Accesses JPEG or MP3 files, or updates TV firmware.

NOTE Component/Standard (composite) video cables carry only video information; separate audio cables are required for a complete connection.

Chapter 2

Connecting Your TV

Overview of cable types

Before purchasing cables, know the connector types your devices require. You can purchase cables from most stores that sell audio/video devices.

Coaxial (F-type) cable

(Sample Illustration) Coaxial cable

Coaxial (F-type) cable connects your antenna, cable TV service, and/or cable converter box to the ANT/CABLE input on your TV.

21

22	Connecting Your TV
	Overview of cable types

Standard A/V cables (red/white/yellow)

(Sample Illustration) Standard AV cables

Standard A/V cables (composite video) usually come in sets of three, and connects to video devices with analog audio and composite video output. These cables (and the related inputs on your TV) are typically color-coded according to use: yellow for video, red for stereo right audio, and white for stereo left (or mono) audio.

Component video cables (red/green/blue)

(Sample Illustration) Component video cables

Component video cables come in sets of three and connects with video devices with component video output. (ColorStream® is Toshiba’s brand of component video.) These cables are typically color-coded red, green, and blue. Separate audio cables are required for a complete connection.

NOTE Component video cables provide better picture quality than composite video cables.

HDMI® cable (with HDMI Logo)

(Sample Illustration) HDMI® cable

HDMI® (High-Definition Multimedia Interface) cable connects to devices that have an HDMI® output. An HDMI® cable delivers digital audio and video in its native format. Separate audio cables are not required, see “Connecting an HDMI® or DVI device to the HDMI® input” on page 28.

Connecting Your TV	23
Overview of cable types

NOTE HDMI® cables provide the best audio and picture quality.

Optical audio cable

(Sample Illustration) Optical audio cable

Optical audio cable connects receivers with Dolby® Digital or PCM (pulse-code modulation) optical audio input to the TV’s Digital Audio Out terminal, see “Connecting a digital audio system” on page 33.

Analog RGB (15-pin) computer cable

(Sample Illustration) Analog RGB (15-pin) computer cable

Analog RGB (15-pin) computer cable connects a computer to the to the TV’s PC IN terminal, see “Connecting a computer” on page 35.

NOTE Separate audio cables are required.

3.5mm Stereo to RCA Y-cable

(Sample Illustration) 3.5mm Stereo to RCA Y-cable

3.5mm Stereo to RCA Y-cable connects an audio signal from DVI device to TV.

About the connection illustrations

You can connect different types and brands of devices to your TV in several different configurations. The connection illustrations in this manual are representative of typical device connections only. The input/output terminals on your devices may differ from those illustrated herein. For details on connecting and using your specific devices, refer to each device’s User's Guide.

24		Connecting Your TV
		Connecting a VCR, antenna, cable TV, or camcorder
Connecting a VCR, antenna, cable TV, or camcorder
Camcorder			From Cable TV			Cable box
			or antenna
AUDIO	VIDEO
OUT
L						IN	CH 3
							CH 4	OUT
R
		TV back panel	Stereo VCR
			VIDEO	AUDIO
				L	R	IN
					IN	from
					CH 3	ANT
					CH 4
					OUT	OUT
						to
				L	R	TV

(Sample Illustration) L4200U Series—Connecting to a VCR, antenna, or cable TV or camcorder

TV back panel

Camcorder

From Cable TV or antenna

Cable box

Stereo VCR

(Sample Illustration) L5200U Series—Connecting to a VCR, antenna, or cable TV or camcorder

Items needed:

Coaxial cables

Standard AV cables

If you have a mono VCR, connect L/MONO on the TV to your VCR’s audio out terminal using the white audio cable only.

Standard audio cables

Connecting Your TV	25
Connecting a DVD player with ColorStream® (component

NOTE When you use a cable box, you may not be able to use the remote control to program or access certain features on the TV.

When you use ColorStream® HD or Video, switch AV input mode appropriately.

To view the antenna or cable signal:

Select ANT/CABLE video input source on the TV.*

To view basic and premium cable channels:

Turn Off the VCR. Select the ANT/CABLE video input source on the TV.* Tune the TV to channel 3 or 4 (whichever channel the cable box output is set to). Use the cable box controls to change channels.

To view the VCR or camcorder video:

Turn On the VCR or camcorder video. Select VIDEO input source on the TV.*

*To select the video input source, press the INPUT button on the remote control, see “Selecting the video input source” on page 59.

NOTE The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

Connecting a DVD player with ColorStream® (component video), and a satellite receiver

DVD player
TV back panel
COMPONENT VIDEO	AUDIO OUT
Y PB PR	L R

Satellite	COMPONENT VIDEO S-VIDEO VIDEO		R
IN		OUT OUT	AUDIO
			OUT
Y	PB	PR	L

Satellite receiver

(Sample Illustration) L4200U Series—Satellite receiver with component video or DVD player with component video

26	Connecting Your TV
	Connecting a DVD player with ColorStream® (component

NOTE ColorStream® and composite video cables cannot be connected simultaneously.

TV back panel
DVD player
	COMPONENT VIDEO		AUDIO OUT
Y	PB	PR	L	R

TV back panel

Satellite Receiver

			AUDIO
			OUT
Y	PB	PR	L
Satellite	COMPONENT VIDEO S-VIDEO VIDEO		R
IN		OUT OUT

(Sample Illustration) L5200U Series—Satellite receiver with component video or DVD player with component video

Items needed:

Coaxial cables

Standard AV cables

If you have a mono VCR, connect L/MONO on the TV to your VCR’s audio out terminal using the white audio cable only.

Standard audio cables

Component video cables

You can connect the component video cables (plus audio cables) from the DVD player or satellite receiver to the COLOR STREAM HD terminal in the TV. The COLOR STREAM HD terminal can be used to display Progressive (480p, 720p) and Interlaced (480i, 1080i) scan systems. Please note that 1080p is not supported. Check the User’s Guide of the DVD player in order to determine the best output signal available.

Connecting Your TV	27
Connecting a DVD player with ColorStream® (component

If your DVD player or satellite receiver does not have component video, connect a standard A/V cable to the AUDIO/VIDEO terminal. If your DVD player has HDMI® video, see “Connecting an HDMI® or DVI device to the HDMI® input” on page 28.

NOTE When you use ColorStream® HD or Video, switch AV input mode appropriately.

To view antenna or Cable channels:

Select the ANT/CABLE video input source on the TV.*

To view the DVD player:

Turn ON the DVD player. Select the ColorStream® HD video input source on the TV.*

To view satellite programs using the component video connections:

Turn ON the satellite receiver. Select the ColorStream® HD video input source on the TV.*

To view the VCR or view and record antenna channels:

Turn ON the VCR. Tune the VCR to the channel you want to watch. Select the VIDEO video input source on the TV.*

To record a TV program while watching a DVD:

Turn ON the VCR. Tune the VCR to the channel to record. Select the ColorStream® HD video input source on the TV* to view the DVD.

*To select the video input source, press the INPUT button on the remote control, see “Selecting the video input source” on page 59.

NOTE The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

28	Connecting Your TV
	Connecting an HDMI® or DVI device to the HDMI® input

Connecting an HDMI® or DVI device to the HDMI® input

The HDMI® input on your TV receives digital audio and uncompressed digital video from an HDMI® source device, or uncompressed digital video from a DVI (Digital Visual Interface) source device.

This input is designed to accept HDCP (HighBandwidth Digital-Content Protection) program material in digital form from EIA/CEA-861-D– compliant[1] consumer electronic devices (such as a set-top box or DVD player with HDMI® or DVI output).

The HDMI® input can accept and display VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i (60Hz), and 1080p (24Hz/60Hz) signal formats. For detailed signal specifications, see “HDMI® signal formats” on page 130.

Supported Audio format: Linear PCM, sampling rate 32/44.1/48 kHz.

NOTE To connect a computer to the HDMI® input, see “Connection to the TV’s HDMI® terminal” on page 37.

To connect an HDMI® device, you will need one HDMI® cable (type A connector) per HDMI® device.

For proper operation, it is recommended that you use an

HDMI® cable with the HDMI® Logo (

).

HDMI® cables transfer both video and audio. Separate analog audio cables are not required (see illustration). See “Setting the HDMI® audio mode” on page 55

TV back panel

Playback device

(Sample Illustration) L4200U Series—HDMI® connections

Connecting Your TV	29
Connecting an HDMI® or DVI device to the HDMI® input

TV back panel

Playback device

(Sample Illustration) L5200U Series—HDMI® connections

To view the HDMI® device video:

Select HDMI 1, HDMI 2, or HDMI 3 (for L5200U Series) video input source on the TV. (Press the INPUT button on the remote control. For more information, see “Selecting the video input source” on page 59.)

To connect a DVI device, you will need:

HDMI® to DVI adapter cable

For proper operation, the length of an HDMI® to DVI adapter cable should not exceed 9.8 ft (3m). The recommended length is 6.6 ft (2m).

3.5mm Stereo to RCA Y-cable

An HDMI® to DVI adapter cable transfers video only. Separate analog audio cables are required (see illustration).

30	Connecting Your TV
	Connecting an HDMI® or DVI device to the HDMI® input

For more information, see “Setting the HDMI® audio mode” on page 55

TV back panel

Playback device

(Sample Illustration) L4200U Series—DVI connections

TV back panel

Playback device

(Sample Illustration) L5200U Series—DVI connections