Samsung UN60EH6000, UN46EH6000FXZA, UN46EH6050, UN60EH6050, UN55EH6000 User Manual

...
0 (0)

LED TV

user manual

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.

Important Warranty Information Regarding Television Format Viewing

See the warranty card for more information on warranty terms.

Wide screen format LED Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of LED Displays that leave subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer picture sizing features, use these controls to view different formats as a full screen picture. Be careful in the selection and duration of television formats you use for viewing. Uneven LED aging as a result of format selection and use, as well as burned-in images, are not covered by your Samsung limited warranty.

• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT

Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period originally specified, and to the Original Purchaser only.

The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal use of the product. Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or replacements, accessories, options, upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please call toll-free:

––In the United States : 1-800-SAMSUNG (1-800-726-7864)

––In Canada : 1-800-SAMSUNG

Still image warning

Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock or news bars at screen bottom etc.) on the screen. Constant displaying of still pictures can cause ghosting of LED screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations:

Avoid displaying the same TV channel for long periods.

Always try to display any image on full screen, use TV set picture format menu for best possible match.

Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process.

Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.

Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

xxIf you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.

The appearance may differ depending on the product.

Be careful when you contact the TV because some parts can be somewhat hot.

Installation with a stand.

Installation with a wall-mount.

4inches

 

4inches

4inches

4inches

 

 

 

 

4inches

 

 

4inches

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4inches

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Country

CANADA

U.S.A

 

 

 

 

Samsung Electronics

Samsung Electronics

 

Canada Inc., Customer

 

America, Inc.

Address

Service 55 Standish

85 Challenger Road

Court Mississauga,

 

Ridgefield Park, NJ

 

Ontario L5R 4B2

 

07660-2112

 

Canada

 

 

 

 

 

Customer Care

1-800-SAMSUNG(726-7864)

Center

 

 

Web Site

www.samsung.com

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

© 2012 Samsung Electronics Co., Ltd. All rights reserved.

BN68-04500B-00

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

- 1 -

Getting Started

Accessories

• Remote Control (AA59-00600A) &

Owner’s Instructions

Power Cord

 

Batteries (AAA x 2)

• Warranty Card / Safety Guide

Wire Holder Stand (BN61-05491A)

Input Cables (Sold Separately)

RS232 (AA39-00311A)

Component

Audio

Composite (AV)

HDMI

Coaxial (RF)

HDMI-DVI

 

 

Check the cable before plug-in

 

 

 

Cable

 

Ports

 

HDMI

 

 

 

USB

 

 

 

Optical

 

 

Do not plug cable upside down.

Be sure to check before plug-in.

TV Controller (Panel Key)

Function menu

MEDIA.P

m R s

P

Return

TV Controller

 

Remote control sensor

Power on

Turns the TV on by pressing the controller in standby mode.

Adjusting the volume

Adjusts the volume by moving the controller from side to

side when the power is on.

 

Selecting a channel

Selects a channel by moving the controller up and down

when the power is on.

 

 

Press the controller when the power is on, then the function

Using the function menu

menu screen appears. If you press it again, the function

 

menu screen disappears.

 

Selects the MEDIA.P by moving the controller in the

Selecting the Media Play

function menu screen. The Media Play main screen

 

appears.

 

Selects the MENU(m) by moving the controller in the

Selecting the MENU (m)

function menu screen. The OSD(On Screen Display) of your

 

TV’s feature appears.

Selecting the Source

Selects the Source List(s) by moving the controller in the

List (s)

function menu screen. The Source List screen appears.

Power Off (P)

Selects the Power Off (P) to turn the TV off by moving the

controller in the function menu screen.

 

Exits the menu when pressing the controller more than 1 second.

When selecting the function by moving the controller to the up/down/left/ right directions, be sure not to press the controller. If you press it first, you cannot operate it to move the up/down/left/right directions.

Plug & Play (Initial Setup)

When you turn the TV on for the first time, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWER button. Plug & Play is available only when the Input source is set to TV.

Connecting the power cord and antenna. (refer to ‘Connections’)

 

 

Selecting a language

 

Plug & Play

Select the desired OSD (On Screen

Select Language of the OSD.

English

Display) language.

 

Language

FrançaisEspañol

 

 

U Move

E Enter

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Selecting a Home Use mode

 

 

 

Select the Home Use mode. Store

Plug & Play

 

 

Select ‘Home Use’ when installing this TV in your home.

 

 

Demo mode is for retail environments.

 

When pressing TV controller, the

 

 

 

 

 

 

 

function menu screen appears. Select

Store Demo

Home Use

 

 

the MENU(m) and press it more than 5

 

 

 

 

 

seconds using the controller. The Store

 

L Move

E Enter

 

 

Demo mode is set. Cancel the Store

 

 

 

 

Demo by selecting Source List(s)

 

 

 

 

and pressing it more than 5 seconds.

Selecting an antenna

 

 

Plug & Play

 

 

 

Select the Antenna source to memorize.

 

 

 

 

 

 

 

 

 

 

 

Air

 

 

 

 

Start

 

 

Cable

Start

 

Auto

Start

 

 

 

 

 

 

U Move E Enter

m Skip

In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the ▲, ▼, ◄ or ► button.

Setting the Clock Mode

 

Plug & Play

Set the Clock Mode automatically or

Set the Clock Mode.

manually.

If you select the Auto, set the

 

 

Clock Mode

: Auto

 

DST(Daylight Saving Time).

 

On the DST screen, press ENTERE,

then select whether to turn DST

(Daylight Savings Time) on or off. Select E Enter m Skip the time zone where you live.

Viewing the HD Connection Guide

The connection method for the best HD screen quality is displayed.

Enjoy your TV.

Press the ENTEREbutton.

- 2 -

Samsung UN60EH6000, UN46EH6000FXZA, UN46EH6050, UN60EH6050, UN55EH6000 User Manual

Connections

yy For better picture and audio quality, connect to a digital device using an HDMI cable.

yy The picture may not display normally (if at all) or the audio may not work if an external device that uses an older version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.

yy Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur.

AV Device (1)

Using a HDMI Cable (up to 1080p)

yy PC(D-Sub) and PC/DVI AUDIO IN input are not supported.

yy For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.

yy Connecting through the HDMI cable may not be supported depending on the PC.

yy If an HDMI to DVI cable is connected to the HDMI IN 1(DVI) port, the audio does not work. yy EX-LINK: Connector for service only.

yy The side panel may differ depending on the model.

HDMI OUT

TV Side Panel Blu-ray player / DVD / cable box /

sat box

DVI OUT

HDMI OUT

PC

PC

Using a HDMI (to DVI) Cable

Media Play

R W

Y

Using a USB Drive

R W Y

AV Device (2)

Using an Audio/Video

Power Input

TV Rear Panel

Audio Device (1)

Using an Audio (Analog) Cable

 

 

R

AUDIO IN

 

W

R-AUDIO-L

 

 

DVD / Home Theater

VHF/UHF Antenna

R

W

R

B

G

or

ANT OUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cable

R

W

R

B

G

 

 

AV Device (3)

 

 

 

 

Using a Component Cable

 

 

 

Audio Device (2)

 

(up to 1080p)

 

 

 

Using an Optical (Digital) Cable

 

 

 

 

 

 

 

 

 

 

AUDIO OUT VIDEO OUT

AUDIO OUT

COMPONENT OUT

OPTICAL

R-AUDIO-L

R-AUDIO-L

PR

PB

Y

 

 

 

 

 

 

Digital Audio System

VCR

Blu-ray player

 

 

Changing the Input Source

Source List

Use to select TV or an external input source such as a DVD player / Blu-ray player / cable box / STB satellite receiver.

1.Press the SOURCE button.

2.Select a desired external input source.

TV / AV / Component / HDMI1/DVI / HDMI2

You can only choose external devices that are connected to the TV. In the Source List, connected inputs will be highlighted.

How to use Edit Name

Edit Name lets you associate a device name to an input source. To access Edit Name, press the TOOLS button in Source List. The following selections appear under Edit Name:

VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier.

When connecting a PC to the HDMI IN 1(DVI) port with HDMI cable, you should set the TV to PC mode under Edit Name.

When connecting a PC to the HDMI IN 1(DVI) port with HDMI to DVI cable, you should set the TV to DVI PC mode under Edit Name.

When connecting an AV devices to the HDMI IN 1(DVI) port with HDMI to DVI cable, you should set the TV to DVI mode under Edit Name.

Information

You can see detailed information about the connected external device.

- 3 -

Remote Control

This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.

Turns the TV on and off.

Press to directly access to channels.

Press to select additional channels (digital) being broadcasted by the same station. For example, to select channel ‘54-3’, press ‘54’, then press

‘-’ and ‘3’.

Adjusts the volume.

Displays the channel list on the screen.

Views the Media Play. MEDIA.P

Displays and selects the available video sources.

Turns the remote control light on or off. When on, the buttons become illuminated for a moment when pressed. (Using the remote control with this button set to On will reduce the battery usage time.)

Returns to the previous channel. Cuts off the sound temporarily.

Changes channels.

Displays the main on-screen menu.

SLEEP Automatically shuts off the TV at a preset

Quickly select frequently used functions.

Selects the on-screen menu items and changes the values seen on the menu.

Returns to the previous menu.

P.SIZE: Lets you choose the picture size.

MTS: Press to choose stereo, mono or Separate Audio Program (SAP broadcast).

CC: Controls the caption decoder.

time.

Displays information on the TV screen.

Exit the menu.

Use these buttons according to the direction on screen.

Use these buttons in a specific feature.

Display Modes (HDMI/DVI Input)

Optimal resolution is 1920 x 1080@60Hz.

Mode

Resolution

Horizontal

Vertical Frequency

Pixel Clock

Sync Polarity

Frequency (KHz)

(Hz)

Frequency (MHz)

(H / V)

 

 

IBM

640 x 350

31.469

70.086

25.175

+/-

720 x 400

31.469

70.087

28.322

-/+

 

 

640 x 480

35.000

66.667

30.240

-/-

MAC

832 x 624

49.726

74.551

57.284

-/-

 

1152 x 870

68.681

75.062

100.000

-/-

 

640 x 480

31.469

59.940

25.175

-/-

 

640 x 480

37.861

72.809

31.500

-/-

 

640 x 480

37.500

75.000

31.500

-/-

 

800 x 600

37.879

60.317

40.000

+/+

 

800 x 600

48.077

72.188

50.000

+/+

 

800 x 600

46.875

75.000

49.500

+/+

 

1024 x 768

48.363

60.004

65.000

-/-

 

1024 x 768

56.476

70.069

75.000

-/-

 

1024 x 768

60.023

75.029

78.750

+/+

VESA DMT

1152 x 864

67.500

75.000

108.000

+/+

 

1280 x 720

45.000

60.000

74.250

+/+

 

1280 x 800

49.702

59.810

83.500

-/+

 

1280 x 1024

63.981

60.020

108.000

+/+

 

1280 x 1024

79.976

75.025

135.000

+/+

 

1366 x 768

47.712

59.790

85.500

+/+

 

1440 x 900

55.935

59.887

106.500

-/+

 

1600 x 900RB

60.000

60.000

108.000

+/+

 

1680 x 1050

65.290

59.954

146.250

-/+

 

1920 x 1080

67.500

60.000

148.500

+/+

Installing batteries (Battery size: AAA)

NOTE

xxUse the remote control within 23 feet from TV.

xxBright light may affect the performance of the remote control. Avoid use when nearby fluorescent lights or neon signs.

xxThe Color and shape may vary depending on the model.

- 4 -

Channel Menu

Seeing Channels

Channel List

Add, delete or set Favorite channels and use the program guide for digital broadcasts. Select a channel in the All Channels, Added Channels, Favorite or Programmed screen by pressing the ▲

/ ▼ buttons, and pressing the ENTERE button. Then you can watch the selected channel.

 

6

Air

Added

6-1

♥TV #6

7-1

♥TV#7

Channels

9

Air

 

8

Air

 

9-1

♥TV #9

 

10

Air

 

10-1

♥TV #10

 

11-1

♥TV #11

Air

' Zoom ' Select TTools ► Next Program

All Channels: Shows all currently available channels. ■ Added Channels: Shows all added channels.

* Favorite: Shows all favorite channels.

Programmed: Shows all currently reserved programs.

Using the remote control buttons with the Channel List

xxGreen (Zoom): Enlarges or shrinks a channel number.

xxYellow (Select): Selects multiple channel lists. Select desired channels and press the Yellow button to set all the selected channels at the same time. The c mark appears to the left of the selected channels.

xxT (Tools): Displays the Channel List option menu. (The Options menus may differ depending on the situation.)

Channel Status Display icons

Icons

Operations

cA channel selected.

*A channel set as a Favorite.

)A reserved program.

(A program currently being broadcast.

Memorizing channels

Antenna (Air / Cable) t

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).

Auto Program

When selecting the Cable TV system: Selects the cable system. STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point, the signal source has been selected.

After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then reappears.

Press the ENTERE button to stop the channel store during

Auto Program.

How to Stop Auto Programming

1.Press the ENTERE button.

2.A message will ask Stop Auto Program? Select Yes by pressing the ◄ or ► button.

3.Press the ENTERE button.

Other Features

Clear Scrambled Channel

This function filters out scrambled channels after Auto Program is completed. This process may take up to 20~30 minutes.

Press the ENTERE button to stop the Clear Scrambled Channel.

This function is only available in Cable mode.

Channel List

Channel List Option Menu t

Set each channel using the Channel List menu options. Option menu items may differ depending on the channel status.

Add / Delete: Delete or add a channel to display the channels you want.

All deleted channels will be shown on the All Channels menu.

A gray-colored channel indicates the channel has been deleted.

The Add menu only appears for deleted channels.

Delete a channel from the Added Channels or Favorite menu in the same manner.

Add to Favorite / Delete from Favorite t: Set channels you watch frequently as Favorites.

Timer Viewing: You can set a desired channel to be displayed automatically at the set time; even when you are watching another channel. Set the current time first to use this function.

Only memorized channels can be reserved.

Reserved programs will be displayed in the Programmed menu.

When a digital channel is selected, press the ► (Next Program) button to view the digital program. If you select the ENTERE(Schedule) button on the next program, you can set Timer Viewing directly.

Channel Name Edit (analog channels only): Assign your own channel name.

Select All: Select all the channels in the channel list. ■Deselect All: Deselect all the selected channels.

You can only select Deselect All when one or more channels are selected.

Auto Program: Scans for a channel automatically and stores in the TV

Programmed

(in Channel List)

You can view, modify or delete a show you have reserved to watch.

Change Info: Change a show you have reserved to watch. ■Cancel Schedules: Cancel a show you have reserved to watch.

Information: Display a show you have reserved to watch. (You can also change the reservation Information.)

Select All / Deselect All: You can select or deselect all channels in the channel list.

- 5 -

Loading...
+ 11 hidden pages