Samsung BN68-02924A-02, UN46C6900, UN55C6900 User Manual

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Country	Customer Care Center	Web Site	Address
CANADA	1-800-SAMSUNG (726-7864)	www.samsung.com	Samsung Electronics Canada Inc., Customer Service
			55 Standish Court Mississauga, Ontario L5R 4B2
			Canada
U.S.A	1-800-SAMSUNG (726-7864)	www.samsung.com	Samsung Electronics America, Inc. 105 Challenger
			Road Ridgefield Park, NJ 07660-0511

LED TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Model______________ Serial No.______________

© 2010 Samsung Electronics Co., Ltd. All rights reserved.	BN68-02924A-02

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.

Important Warranty Information Regarding Television Format Viewing

See the warranty card for more information on warranty terms.

Wide screen format LED Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on no nexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week.

Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of LED Displays that leave subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer picture sizing features, use these controls to view different formats as a full screen picture.

Be careful in the selection and duration of television formats used for viewing. Uneven LED aging as a result of format selection and use, as well as burned in images, are not covered by your Samsung limited warranty.

•SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT

Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period originally specified, and to the Original Purchaser only.

The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal use of the product.

Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or replacements, accessories, options, upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please call toll-free:

–In the United States : 1-800-SAMSUNG (1-800-726-7864)

–In Canada : 1-800-SAMSUNG

Still image warning

Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock or news bars at screen bottom etc.) on the screen. Constant displaying of still picture can cause ghosting of LED screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations:

•Avoid displaying the same TV channel for long periods.

•Always try to display a full screen image.

•Reducing brightness and contrast will help to avoid the appearance of after-images.

•Use all TV features designed to reduce image retention and screen burn, refer to proper user manual section for details.

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.

Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

xx If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.The appearance may differ depending on the product.

Installation with a stand.

Installation with a wall-mount.

4 inches

4 inches

4 inches

	4 inches
4 inches	4 inches
	4 inches

2 English

Contents
Getting Started
yy	List of Features..........................................................	4
yy	Accessories...............................................................	4
yy	Install the Stand.........................................................	5
yy Viewing the Control Panel..........................................		6
yy Viewing the Remote Control......................................		7
yy Connecting to an Antenna.........................................		8
yy Plug & Play (Initial Setup)...........................................		8
Connections
yy Connecting to an AV Device......................................		9
yy Connecting to an Audio Device................................		10
yy Connecting to a PC.................................................		11
yy Changing the Input Source......................................		12
Basic Features
yy How to Navigate Menus..........................................		12
yy	Channel Menu.........................................................	13
	Seeing Channels	13
	Using Favorite Channels	13
	Memorizing Channels	13
	Editing Channels	14
	Other Features	14
yy	Picture Menu...........................................................	15
	Changing the Preset Picture Mode	15
	Adjusting Picture Settings	15
	Economical Solutions	15
	Changing the Picture Options	15
	Setting up the TV with Your PC	17
yy	Sound Menu............................................................	18
	Changing the Preset Sound Mode	18
	Adjusting Sound Settings	18
	Sound Settings	18
yy	Setup Menu.............................................................	19
	Setting the Time	19
	Using the Sleep Timer	19
	Setting the On / Off Timer	20
	Locking Programs	20
	Other Features	21
	Picture In Picture (PIP)	23
yy	Support Menu.........................................................	23

Advanced Features
yy	Network Connection................................................	25
	Connecting to a Wired Network	25
	Connecting to a Wireless Network	27
yy	Media Play...............................................................	32
	Connecting a USB Device	32
	Connecting to your PC through a network	32
	Screen Display	34
	Playing Multiple Files	37
	Media Play - Additional Functions	37
yy	Anynet+...................................................................	39
	Setting Up Anynet+	40
	Switching between Anynet+ Devices	40
	Recording	40
	Listening through a Receiver	41
	Troubleshooting for Anynet+	41
yy	Internet@TV.............................................................	42
	Getting Started with Internet@TV	42
	Setting up Internet@TV	43
	Using the Internet@TV service	45
	BEST BUY APPLICATION	45
	Help Website	46
yy	AllShare...................................................................	47
	About AllShare	47
	Setting Up AllShare	47
Other Information
yy	Assembling the Cables............................................	49
yy Installing the Wall Mount..........................................		50
yy	Anti-theft Kensington Lock......................................	51
yy Securing the TV to the Wall......................................		52
	To Avoid the TV from Falling	52
yy	Troubleshooting.......................................................	53
yy	License....................................................................	56
yy	Specifications..........................................................	57
yy	Dimensions..............................................................	58
yy	Index.......................................................................	59

Check the Symbol!

t

TOOLS	Note	Step by Step Guide
This function can be used by pressing the	Indicates additional information.	Check here for instructions on how to open
TOOLS button on the remote control.		the relevant submenu within the OSD (on
		screen display).

ENGLISH

English 3

Getting Started

List of Features

yy Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed without a cable box / STB (Set-Top-Box) satellite receiver.

yy Media Play: Allows you to play music files, pictures and movies saved on a USB device (p. 32).

yy Internet@TV: You can use various internet services and view useful information and entertaining content (p. 42). yy AllShare: AllShare connects your TV and compatible Samsung mobile phones/devices through a network (p. 47). yy Self Diagnosis: You can check to make sure picture and sound operate normally (p. 23).

Accessories

Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.The items' colors and shapes may vary depending on the models.

yy Remote Control (BN59-01042A) & Batteries (AAA x 2)		yy	Cleaning Cloth (BN63-01798B)
yy	Owner’s Instructions	yy	Power Cord
yy	Warranty Card / Safety Guide / Quick Setup Guide

(M4 X
Blanking Bracket & Screw (1EA)	Cable Tie	Holder-Ring (4EA)
(BN63-06543A)	(BN61-05596A)	(BN61-05280A)

Holder-Wire stand	Holder-Wire (3EA)	Power Cord Clamp
(BN61-05491A)	(BN61-05373A)	(AA65-30023A)

For best cable connection to this product, be sure to use cables with a maximum thickness as below:

yy Maximum thickness - 0.55 inches (14mm)

Input Cables (Sold Separately)

HDMI	HDMI-DVI	Component	Composite (AV)	Coaxial (RF)	VGA

4 English

Install the Stand

See separate guide for installing the stand.

	s		s	(M4 X L8)
			s
		s
			s
Stand (1EA)	Guide Stand (1EA)			Screws (9EA)

Follow the steps below to connect the TV to the stand.

Screws (M4 X L8)		Top view
Guide Stand	s	s
		s

Stand

Rear

1. Connect the Guide Stand to the Stand using four screws (M4 X L8) as shown.

s

	s
s	s
	s

2

s

Screws (M4 X L8)

1

s

s	s
	s

s

2. With your TV upright, connect the TV to the Stand.	3. Fasten two screws (M4 X L8) at position 1, and then
	fasten three screws (M4 X L8) at position 2.

NOTE

xx Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them. xx Make sure that at least two persons lift and move the LED TV.

xx Stand the product up and fasten the screws. If you fasten the screws with the LED TV placed down, it may lean to one side.

Started Getting 01

English 5

Getting Started

Viewing the Control Panel

The product color and shape may vary depending on the model.

Remote control sensor / Power Indicator Speakers

Remote control sensor	Aim the remote control towards this spot on the TV.
Power Indicator	Blinks and turns off when the power is on and lights up in standby mode.
SOURCEE	Toggles between all the available input sources. In the on-screen menu, use this
	button as you would use the ENTEREbutton on the remote control.
MENU	Displays an on-screen menu, the OSD (on screen display) of your TV’s features.
y	Adjusts the volume. In the OSD, use the ybuttons as you would use the ◄
	and ► buttons on the remote control.
z	Changes the channels. In the OSD, use the zbuttons as you would use the
	▼ and ▲ buttons on the remote control.
P(Power)	Turns the TV on or off.

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

6 English

Viewing the Remote Control

This is a special remote control for the visually impaired and has Braille points on the Power, Channel and Volume buttons.

Turns the TV on and off.

Displays and selects the available video sources (p. 12).

Press to directly access channels.

Press to select additional channels (digital) being broadcasted by the same station. For example, to select channel “54-3”, press “54”, then press “-” and “3”.

Adjusts the volume.

Brings up the OSD.

Displays the Content View, which includes Channel List, Internet@TV, Media Play and AllShare.

Quickly select frequently used functions.

Returns to the previous menu.

These buttons are for the Channel List,

Internet@TV, Media Play menu, etc.

Use these buttons in Media Play and Anynet+ (HDMI-CEC) modes (p. 32, 39).

( : Controls recording for Samsung recorders that have the Anynet+ feature)

Installing batteries (Battery size: AAA)

POWER ON/OFF

SOURCE

	PRE-CH
MUTE
CH LIST
MENU	@TV
CONTENT	INTERNET
TOOLS	INFO

RETURN EXIT

A B C D

Turns the remote control light on or off. When on, the buttons become

illuminated for a moment when pressed. (Using the remote control with this button set to ON will reduce the battery usage time.)

Returns to the previous channel.

Cuts off the sound temporarily.

Changes channels.

Displays the channel list on the screen (p. 13).

Link to various internet services (p. 42).

Displays information on the TV screen.

Selects the on-screen menu items and changes the values seen on the menu.

Exits the menu.

MEDIA.P HOTAPPS MTS

FAV.CH P.SIZE CC

MEDIA.P: Displays Media Play (p. 32).

HOTAPPS: Runs BBY (p. 45). MTS: Press to choose stereo, mono or Separate Audio Program (SAP broadcast) (p. 18~19).

FAV.CH: Displays Favorite Channel Lists on the screen (p. 13).

P.SIZE: Selects the picture size (p. 16). CC: Controls the caption decoder

(p. 21).

NOTE

xx Use the remote control within 23 feet from the TV.

xx Bright light may affect the performance of the remote control. Avoid use when nearby fluorescent lights or neon signs.

xx The color and shape may vary depending on the model.

English 7

Started Getting 01

Getting Started

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.The product color and shape may vary depending on the model.Connecting the power cord and antenna.

VHF/UHF Antenna

Antenna Cable (Not Supplied)

Cable

or

ANT OUT

Power Input

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERPbutton. Plug & Play is available only when the Input source is set to TV.

To return to the previous step, press the Red button.

1	Selecting a language
2	Selecting Store Demo
	or Home Use
3	Selecting an antenna
4	Selecting a channel
5	ModeSetting the Clock
6	Viewing the HD
	Connection Guide.
7	Enjoy your TV.

Press the ▲ or ▼ button, then press the ENTEREbutton. Select the	POWER
desired OSD (On Screen Display) language.	P
Press the ◄ or ► button, then press the ENTEREbutton.

yy Select the Home Use mode. Store Demo Mode is for retail

environments.

yy To return the unit’s settings from Store Demo to Home Use (standard): Press the volume button on the TV. When you see the volume OSD, press and hold MENU for 5 sec.

Press the ▲ or ▼ button, then press the ENTEREbutton. Select Air, Cable or Auto.

Press the ▲ or ▼ button, then press the ENTEREbutton. Select the channel source to memorize. When setting the antenna source to Cable, a step appears allowing you to

assign numerical values (channel frequencies) to the channels. For more information, refer to

Channel → Auto Program (p. 13).

Press the ENTEREbutton at any time to interrupt the memorization process. Set the Clock Mode automatically or manually.

yy Auto: Allows you to select DST (Daylight Saving Time) mode and time zone. yy Manual: Allows you to manually set the current date and time (p. 19).

yy The connection method for the best HD screen quality is displayed.

Press the ENTEREbutton.

If You Want to Reset This Feature...

OO MENUm→ Setup → Plug & Play → ENTERE

8 English

Connections

Connecting to an AV Device

Using an HDMI or HDMI/DVI cable: HD connection (up to 1080p)

We recommend using the HDMI connection for the best quality HD picture.

Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver

HDMI Cable (Not Supplied)

HDMI to DVI Cable (Not Supplied)

R W

Red White

R W

Audio Cable (Not Supplied)

HDMI IN 1(DVI), 2, 3, 4, PC/DVI AUDIO IN

Device

HDMI OUT

Device

DVI OUT

AUDIO OUT

R-AUDIO-L

xx When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack for video. A DVD, Blu-ray player, HD cable box, or HD STB satellite receiver may require a DVI-HDMI (DVI to HDMI) cable or DVI-HDMI (DVI to HDMI) adapter. The PC/DVI AUDIO IN jack is required for audio.

xx If an external device such as a DVD / Blu-ray player / HD cable box / HD STB satellite receiver supporting HDMI versions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display / no sound / annoying flicker / abnormal color).

xx If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you suspect the version is older than 1.3, contact the provider of the device to confirm the HDMI version and request an upgrade.

xx It is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a connection error may occur.

Using a Component (up to 1080p) or Audio/Video (480i only) Cable

Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR

Connections 02

Video Cable (Not Supplied)

Y

W

					R	W
					Red	White
					R	B	G
R	W	R	B	G	Red	Blue	Green

R

R

W

Y

Red White Yellow

Device

Audio Cable (Not Supplied)	Component Cable (Not Supplied)

Y

R

W

R

W

R

B

G

VIDEO OUT AUDIO OUT	AUDIO OUT	COMPONENT OUT			Device
R-AUDIO-L	R-AUDIO-L	PR	PB	Y

When connecting to AV IN, the color of the AV IN [Y/VIDEO] jack (green) will not match the video cable (yellow).To obtain the best picture quality, the Component connection is recommended over the A/V connection.

English 9

Connections

Connecting to an Audio Device

Using an Optical (Digital) or Audio (Analog) Cable Connection

Available devices: Digital Audio System, Amplifier, DVD home theater

R W

Red White

Audio Cable (Not Supplied)

Amplifier / DVD home theater

AUDIO IN

R-AUDIO-L

Optical Cable (Not Supplied)

Digital Audio System

OPTICAL

DIGITAL AUDIO OUT (OPTICAL)

xx When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system.

xx 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.

xx When the receiver (amplifier or DVD home theater) is set to on, you can hear sound output from the TV’s optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the amplifier or DVD home theater. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the amplifier or DVD home theater. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theater.

AUDIO OUT: Connects to the audio input jacks on your amplifier / DVD home theater. xx When connecting, use the appropriate connector.

xx When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust the volume level with the Amplifier’s volume control.

Using an EX-Link Cable Connection

Available Devices: External devices that support EX-Link

EX-LINK: Connector for service only.

10 English

Connecting to a PC

Using an HDMI/DVI Cable or a D-sub Cable

				HDMI to DVI Cable (Not Supplied)		PC OUT
						AUDIO OUT
				Audio Cable (Not Supplied)
						AUDIO OUT
						PC OUT
				D-Sub Cable (Not Supplied)
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1920 X 1080 @ 60 Hz.
Mode	Resolution	Horizontal Frequency		Vertical Frequency	Pixel Clock Frequency		Sync Polarity
			(KHz)	(Hz)		(MHz)	(H / V)
IBM	640 x 350		31.469	70.086		25.175	+/-
	720 x 400		31.469	70.087		28.322	-/+
	640 x 480		35.000	66.667		30.240	-/-
MAC	832 x 624		49.726	74.551		57.284	-/-
	1152 x 870		68.681	75.062		100.000	-/-
	720 x 576		35.910	59.950		32.750	-/+
VESA CVT	1152 x 864		53.783	59.959		81.750	-/+
	1280 x 720		56.456	74.777		95.750	-/+
	1280 x 960		75.231	74.857		130.000	-/+
	640 x 480		31.469	59.940		25.175	-/-
	640 x 480		37.861	72.809		31.500	-/-
	640 x 480		37.500	75.000		31.500	-/-
	800 x 600		37.879	60.317		40.000	+/+
	800 x 600		48.077	72.188		50.000	+/+
	800 x 600		46.875	75.000		49.500	+/+
	1024 x 768		48.363	60.004		65.000	-/-
	1024 x 768		56.476	70.069		75.000	-/-
	1024 x 768		60.023	75.029		78.750	+/+
VESA DMT	1152 x 864		67.500	75.000		108.000	+/+
	1280 x 1024		63.981	60.020		108.000	+/+
	1280 x 1024		79.976	75.025		135.000	+/+
	1280 x 720		45.000	60.000		74.250	+/+
	1280 x 800		49.702	59.810		83.500	-/+
	1280 x 800		62.795	74.934		106.500	-/+
	1280 x 960		60.000	60.000		108.000	+/+
	1360 x 768		47.712	60.015		85.500	+/+
	1440 x 900		55.935	59.887		106.500	-/+
	1440 x 900		70.635	74.984		136.750	-/+
	1680 x 1050		65.290	59.954		146.250	-/+
VESA GTF	1280 x 720		52.500	70.000		89.040	-/+
	1280 x 1024		74.620	70.000		128.943	-/-
VESA DMT / DTV CEA	1920 x 1080p		67.500	60.000		148.500	+/+

NOTE

xx For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack. xx The interlace mode is not supported.

xx The set may operate abnormally if a non-standard video format is selected.

xx Separate and Composite modes are supported. SOG(Sync On Green) is not supported.

English 11

Connections 02

Connections

Changing the Input Source

Source List

Use to select TV or an external input sources	SOURCE
such as a DVD / Blu-ray player / cable box /
STB satellite receiver.

OO MENUm→ Input → Source List →

ENTERE

■■ TV / AV / Component / PC / HDMI1/DVI / HDMI2 / HDMI3 / HDMI4 / USB

You can only choose external devices that are connected to the TV. In the Source List, connected inputs will be highlighted.

In the Source List, PC is always activated.

Basic Features

How to Navigate Menus

Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions.

			MENU	@TV
1	CONTENT			INTERNET
2
3	RETURN			EXIT	4
	A	B	C	D

1MENU button: Displays the main on-screen menu.

2ENTERE/ Direction button: Move the cursor and select an item. Confirm the setting.

3RETURN button: Returns to the previous menu.

4EXIT button: Exits the on-screen menu.

Edit Name

OO MENUm→ Input → Edit Name → ENTERE

■■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier.

When a PC with a resolution of 1920 x 1080 @ 60Hz is connected to the HDMI IN 1(DVI) port, you should set to DVI PC mode under Edit Name.

When connecting an HDMI/DVI cable to the HDMI IN 1(DVI) port, you should set to DVI PC or DVI Devices mode under Edit Name.

How to Operate the OSD (On Screen Display)

The access step may differ depending on the selected menu.

1	MENUm
2	▲ / ▼
3	ENTERE
4	▲ / ▼
5	◄ / ►
6	ENTERE
7	EXITe

The main menu options appear on the screen:

Picture, Sound, Channel, Setup, Input, Application, Support.

Select an icon with the ▲ or ▼ button.

Press ENTEREto access the sub-menu.

Select the desired submenu with the ▲ or ▼ button.

Adjust the value of an item with the ◄ or ► button. The adjustment in the OSD may differ depending on the selected menu.

Press ENTEREto confirm the selection.

Press EXIT.

12 English

xx xx B

Channel Menu

¦¦ Seeing Channels

Channel List

Add, delete or set Favorite channels and use	CH LIST
the program guide for digital broadcasts.

OO MENUm→ Channel → Channel List → ENTERE

Select a channel in the All Channels, Added Channels, Favorite or Programmed screen by pressing the ▲ / ▼ and ENTERE buttons. Then you can watch the selected channel.

	6			Air
Added	6-1		* TV #6
	7			Air
Channels	8			Air
	9			Air
	9-1		* TV #9
	10			Air
	10-1		* TV #10
	11-1		* TV #11
Air		Antenna		Zoom		Select kPage TTools
			B

■■ All Channels: Shows all currently available channels. ■■ Added Channels: Shows all added channels.

■■ *Favorite: Shows all favorite channels.

■■ Programmed: Shows all currently reserved programs.

Using the color buttons with the Channel List

Red (Antenna): Switches to Air or Cable.

Green (Zoom): Enlarges or shrinks a channel number.

xx Yellow (Select): Selects multiple channel lists. Select desired channels and press the Yellow button to set all the selected channels at the same time. The cmark appears to the left of the selected channels.

xx k(Page): Move to next or previous page.

xx T(Tools): Displays the Channel List option menu (The options menus may differ depending on the situation.).

Channel Status Display Icons

Icons Operations

c A channel selected.

*A channel set as a Favorite.

) A reserved Program.

	¦¦ Using Favorite Channels	03
	OO MENUm→ Channel → Channel List → ENTERE	Basic
		Features
	Add to Favorite / Delete from Favorite
	t
	Set channels you watch frequently as Favorites.

1.Select a channel and press the TOOLS button.

2.Add or delete a channel using the Add to Favorite or

Delete from Favorite menu respectively.

	6	Air
Added	6-1	* TV #6
	7	Air	Delete
Channels	8	Air	Add to Favorite
			Timer Viewing
	10	Air
	9	Air	Channel Name Edit
	9-1	* TV #9	Select All
	10-1	* TV #10
	11-1	* TV #11
Air	Antenna	B Zoom	Select kPage TTools
To show all Favorite channels, click on the				FAV.CH
button shown on the right.

¦¦ Memorizing Channels

OO MENUm→ Channel → ENTERE

Antenna (Air / Cable) t

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).

Auto Program

■■ Air: Air antenna signal.

■■ Cable: Cable antenna signal. ■■ Auto: Air and Cable antenna.

NOTE

xx When selecting the Cable TV system: STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point, the signal source has been selected.

English 13

Basic Features

xx After all the available channels are stored, it starts to remove scrambled channels. The Auto Program menu then reappears.

¦¦ Editing Channels

OO MENUm→ Channel → Channel List → ENTERE

Channel Name Edit

1.Select a channel and press the TOOLS button.

2.Edit the channel name using the Channel Name Edit menu.

■■ Channel Name Edit (analog channels only): Assign your own channel name.

¦¦ Other Features

OO MENUm→ Channel → ENTERE

Clear Scrambled Channel

This function is used to filter out scrambled channels after Auto Program is completed. This process may take up to 20~30 minutes.

How to Stop Searching Scrambled Channels

1.Press the ENTEREbutton to select Stop.

2.Press the ◄ button to select Yes.

3.Press the ENTEREbutton.

This function is only available in Cable mode.

Channel List

Channel List Option Menu

Set each channel using the Channel List menu options (Add / Delete, Timer Viewing, Select All / Deselect All). Option menu items may differ depending on the channel status.

1.Select a channel and press the TOOLS button.

2.Select a function and change its settings.

■■ Add / Delete: Delete or add a channel to display the channels you want.

NOTE

xx All deleted channels will be shown on the All Channels menu.

xx A gray-colored channel indicates the channel has been deleted.

xx The Add menu only appears for deleted channels.

xx Delete a channel from the Added Channels or Favorite menu in the same manner.

■■ Timer Viewing: You can set a desired channel to be displayed automatically at the reserved time. Set the current time first to use this function.

1.Press the ◄ / ► / ▲ / ▼ buttons to select the desired channel in Channel List.

2.Press the TOOLS button, then select Timer Viewing.

3.Scroll up or down to adjust the settings in the box, or use the numeric buttons on your remote to enter the date and time.

If you selected Once, Every Week or Every

Day in Repeat, you can enter the date you want.

4.Select OK, then press the ENTEREbutton when done.

NOTE

xx Only memorized channels can be reserved.

xx Reserved programs will be displayed in the

Programmed menu.

xx When a digital channel is selected, press the ► button to view the digital program.

■■ Select All: Select all the channels in the channel list. ■■ Deselect All: Deselect all the selected channels.

You can only select Deselect All when one or more channels are selected.

Programmed

(in Channel List)

You can view, modify or delete a show you have reserved to watch. Programmed timer viewing is displayed here. Highlight a program and press the TOOLS button to display Options.

■■ Change Info: Change a show you have reserved to watch. Begin with step 3 of “Timer Viewing,” above.

■■ Cancel Schedules: Cancel a show you have reserved to watch.

This deletes the highlighted or selected program(s).

■■ Information: Display a show you have reserved to watch (You can also change the reservation Information.).

Alternatively, you can view Information by highlighting a program and pressing the ENTEREbutton.

■■ Select All / Deselect All: Select or deselect all reserved programs.

14 English

Fine Tune

(analog channels only)

If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually. Scroll to the left or right until the image is clear.

Settings are applied to the channel you're currently watching.

Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the channel banner.

To reset the fine-tuning, select Reset.

Picture Menu

¦¦ Changing the Preset Picture Mode

OO MENUm→ Picture → Mode → ENTERE

Mode t

Select your preferred picture type.

■■ Dynamic: Suitable for a bright room.

■■ Standard: Suitable for a normal environment. ■■ Natural: Suitable for reducing eye strain.

Natural is not available in PC mode.

■■ Movie: Suitable for watching movies in a dark room.

¦¦ Adjusting Picture Settings

OO MENUm→ Picture → ENTERE

Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)

Your television has several setting options for picture quality control.

NOTE

xx When you make changes to Backlight, Contrast, Brightness, Sharpness, Color or Tint (G/R) the OSD will be adjusted accordingly.

xx In PC mode, you can only make changes to

Backlight, Contrast and Brightness.

xx Settings can be adjusted and stored for each external device connected to the TV.

¦¦ Economical Solutions

The Eco Function can be used to enhance your power savings.

Eco Solution

OO MENUm→ Picture → Eco Solution → ENTERE

■■ Energy Saving (Off / Low / Medium / High / Picture Off / Auto): This adjusts the brightness of the TV in order to reduce power consumption. If you select Picture Off, the screen is turned off , but the sound remains on. Press any button except volume button to turn on the screen.

■■ Eco Sensor (Off / On): To enhance your power savings; the picture settings will automatically adapt to the light in the room.

If you adjusts the Backlight, the Eco Sensor will be set to Off.

Min Backlight: When Eco sensor is On, the minimum screen brightness can be adjusted manually.

If Eco Sensor is On, the display brightness may change (become slightly darker or brighter) depending on the surrounding light intensity.

■■ No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): To avoid unnecessary energy consumption, set how long you want the TV to remain on if it's not receiving a signal.

Disabled when the PC is in power saving mode.

¦¦ Changing the Picture Options

Advanced Settings

OO MENUm→ Picture → Advanced Settings → ENTERE

(Advanced Settings are available in Standard / Movie mode)

Compared to previous models, new Samsung TVs have a more precise picture.

In PC mode, you can only make changes to Dynamic Contrast, Gamma, White Balance and LED Motion Plus.

Advanced Settings

Black Tone	: Off	►
Dynamic Contrast	: Medium
Gamma	: 0
Expert Pattern	: Off
RGB Only Mode	: Off
Color Space	: Native
White Balance
	▼
	UMove EEnter	RReturn

Features Basic 03

English 15

Basic Features

■■ Black Tone (Off / Dark / Darker / Darkest): Select the black level to adjust the screen depth.

■■ Dynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast.

■■ Gamma: Adjust the primary color intensity.

■■ Expert Pattern (Off / Pattern1 / Pattern2): By running the Expert Pattern function, the picture can be calibrated. If the OSD menu disappears or a menu

other than the Picture menu is opened, the calibration is saved and the Expert Pattern window disappears.

Off: Turns the Expert Pattern function off.

Pattern1: This is a test screen designed to demonstrate the affects of display settings on shades.

Pattern2: This is a test screen designed to demonstrate the affects of display settings on colors.

After selecting Pattern1 or Pattern2, you can adjust any of the advanced settings to the desired effect.

While the Expert Pattern is running, sound is not output.

Only enabled on DTV / Component / HDMI.

■■ RGB Only Mode (Off / Red / Green / Blue): Displays the Red, Green and Blue color for making fine adjustments to the hue and saturation.

■■ Color Space (Auto / Native / Custom): Adjust the range of colors available to create the image.To adjust

Color, Red, Green, Blue and Reset, set Color Space to Custom.

■■ White Balance: Adjust the color temperature for a more natural picture.

R-Offset / G-Offset / B-Offset: Adjust each color's (red, green, blue) darkness.

R-Gain / G-Gain / B-Gain: Adjust each color's (red, green, blue) brightness.

Reset: Resets the White Balance to it's default settings.

■■ 10p White Balance (Off / On): Controls the white balance in 10 point intervals by adjusting the red, green, and blue brightness.

Available when the picture mode is set to Movie and when the external input is set to all input.

Some external devices may not support this function.

Interval: Select interval to adjust. Red: Adjust the red level. Green: Adjust the green level. Blue: Adjust the blue level.

Reset: Resets the 10p White Balance to its default settings.

■■ Flesh Tone: Emphasize pink “Flesh Tone.”

■■ Edge Enhancement (Off / On): Emphasize object boundaries.

16 English

■■ xvYCC (Off / On): Setting the xvYCC mode on increases detail and color space when watching movies from an external device (e.g. BD/DVD player) connected to the HDMI or Component IN jacks.

Available when the picture mode is set to Movie and when the external input is set to HDMI or Component.

Some external devices may not support this function.

■■ LED Motion Plus (Off / Normal / Cinema / Ticker): Removes drag from fast scenes with a lot of movement to provide a clear picture.

Picture Options

OO MENUm→ Picture → Picture Options → ENTERE

In PC mode, you can only make changes to the Color Tone, Size and Auto Protection Time.

Picture Options

Color Tone	: Normal	►
Size	: 16:9
Digital Noise Filter	:Auto
MPEG Noise Filter	:Auto
HDMI Black Level	: Normal
Film Mode	: Off
Auto Motion Plus	: Standard
	▼
	UMove EEnter	RReturn

■■ Color Tone (Cool / Normal / Warm1 / Warm2)

Warm1 or Warm2 will be deactivated when the picture mode is Dynamic.

Settings can be adjusted and stored for each external device connected to an input on the TV.

■■ Size: Your cable box/satellite receiver	P.SIZE
may have its own set of screen sizes as
well. However, we highly recommend you
use 16:9 mode most of the time.

16:9: Sets the picture to 16:9 wide mode. Zoom1: Use for moderate magnification.

Zoom2: Use for a stronger magnification.

Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen.

Available with HD 1080i / 720p signals in 16:9 mode.

4:3: Sets the picture to basic (4:3) mode.

Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and center of the screen may cause image retention (screen burn) which are not covered by the warranty.

Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted.

NOTE

xx When Double (À, Œ) mode has been set in PIP (Picture-in-Picture), the Picture Size cannot be set.

xx After selecting Zoom1, Zoom2 or Wide Fit:

1.Press the ► button to select Position.

2.Press the ENTEREbutton.

3.Press the ▲ or ▼ button to move the picture up or down.

4.Press the ENTEREbutton.

5.Press the ► button to select Reset.

6.Press the ENTEREbutton to reset the picture to its default position.

xx After selecting Screen Fit in HDMI (1080i/1080p) or Component (1080i/1080p) mode, you may need to center the picture:

1.Press the ◄ or ► button to select Position.

2.Press the ENTEREbutton.

3.Press the ▲, ▼, ◄ or ► button to move the picture.

4.Press the ENTEREbutton.

5.Press the ◄ or ► button to select Reset.

6.Press the ENTEREbutton.

xx HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720)

xx Settings can be adjusted and stored for each external device you have connected to an input on the TV.

Input Source	Picture Size
ATV, AV,	16:9, Zoom1,
Component (480i, 480p)	Zoom2, 4:3
DTV(1080i),	16:9, 4:3, Wide Fit,
Component (1080i, 1080p),	Screen Fit
HDMI (720p, 1080i, 1080p)
PC	16:9, 4:3

■■ Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualization): If the broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen.

When the signal is weak, try other options until the best picture is displayed.

Auto Visualization: When changing analog channels, displays signal strength.

Only available for analog channels.

When bar is green, is that the best possible signal.

■■ MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG noise to provide improved picture quality.

■■ HDMI Black Level (Normal / Low): Selects the black level on the screen to adjust the screen depth.

Available only in HDMI mode.

■■ Film Mode (Off / Auto1 / Auto2): Sets the TV to automatically sense and process film signals from all sources and adjusts the picture for optimum quality.

Available in TV, AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i).

■■ Auto Motion Plus (Off / Clear / Standard / Smooth / Custom / Demo): Removes drag from fast scenes with a lot of movement to provide a clearer picture.

If noise occurs on the screen, please set the

Auto Motion Plus to Off. If Auto Motion Plus is Custom, you can set the Blur Reduction, Judder Reduction or Reset manually.

If Auto Motion Plus is Demo, you can compare the difference between on and off modes.

Blur Reduction: Adjusts the blur reduction level from video sources.

Judder Reduction: Adjusts the judder reduction level from video sources when playing films.

Reset: Reset the custom settings.

■■ Auto Protection Time (2 hours / 4 hours / 8 hours / 10 hours / Off): Set the time the screen remains idle

with a still image until the screen saver is activated. The screen saver prevents the formation of ghost images on the screen.

■■ Smart LED (Off / Low / Standard / High / Demo): Controls LED backlight to maximize picture clarity.

Demo: Displays the difference between Smart LED on and off modes.

Picture Reset (OK / Cancel)

Resets your current picture mode to its default settings.

¦¦ Setting up the TV with Your PC

Set the input source to PC.

OO MENUm→ Picture → ENTERE

Auto Adjustment t

Adjust frequency values/positions and fine tune the settings automatically.

Not available when connecting with an HDMI/DVI cable.

Features Basic 03

English 17

Basic Features

Screen

■■ Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Finetune again. After the noise has been reduced, readjust the picture so that it is aligned to the center of screen.

■■ Position: Adjust the PC’s screen positioning if it does not fit the TV screen. Press the ▲ or ▼ button to adjust the Vertical-Position. Press the ◄ or ► button to adjust the Horizontal-Position.

■■ Image Reset: Resets the image to default settings.

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP)

Depending on the version of Windows and the video card, the actual screens on your PC will probably look different, but the same basic set-up information will apply in most cases. (If not, contact your computer manufacturer or Samsung Dealer.)

1.Click on “Control Panel” on the Windows start menu.

2.Click on “Appearance and Themes” in the “Control Panel” window and a display dialog-box will appear.

3.Click on “Display” and a display dialog box will appear.

4.Navigate to the “Settings” tab on the display dialog-box.

yy The correct size setting (resolution) [Optimum: 1920 X 1080 pixels]

yy If a vertical-frequency option exists on your display settings dialog box, the correct value is ‘60’ or ‘60 Hz’. Otherwise, just click ‘OK’ and exit the dialog box.

Sound Menu

¦¦ Changing the Preset Sound Mode

OO MENUm→ Sound → SRS TheaterSound →

ENTERE

SRS TheaterSound t

■■ Standard: Selects the normal sound mode. ■■ Music: Emphasizes music over voices.

■■ Movie: Provides the best sound for movies.

■■ Clear Voice: Emphasizes voices over other sounds.

■■ Amplify: Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired.

¦¦ Adjusting Sound Settings

OO MENUm→ Sound → Equalizer → ENTERE

Equalizer

Adjusts the sound mode (standard sound mode only).

■■ Balance L/R: Adjusts the balance between the right and left speaker.

■■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies.

■■ Reset: Resets the equalizer to its default settings.

¦¦ Sound Settings

OO MENUm→ Sound → ENTERE

SRS TruSurround HD (Off / On) t

(standard sound mode only)

This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF (Head Related Transfer Function) technology.

SRS TruDialog (Off / On)

(standard sound mode only)

This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF (Head Related Transfer Function) technology.

	Preferred Language
	(digital channels only)	MTS
	Digital-TV broadcasts are capable of
	simultaneous transmission of many audio
	tracks (for example, simultaneous translations
	of the program into foreign languages).

You can only select a language among the ones being broadcasted.

18 English