Samsung HG32NA478PFXZA, 570, HG40NA570LFXZA, 470, HG39NA570CFXZA User Manual

...
0 (0)

LED TV

Installation manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Model

 

Serial No.

[HG470570_HOTEL-ZA]ENG.indd 1

 

 

2012-04-17 8:40:48

 

 

 

 

 

 

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.

Introduction

This TV has functionality that lets it interact with a set-back box (SBB/STB) and with other TVs in a computer controlled system for hotels and other hospitality businesses.

Interactive : When the TV is powered-up initially, it sends a command to identify the connected SBB/STB. If it identifies the SBB/STB, the TV switches to ONLINE mode which gives full control of the TV to the SBB/STB.

When the TV is in ONLINE mode, it stops accepting IR (Samsung remote) commands and acts according to the interface protocol.

Stand-Alone: If you are not using an SBB/STB and the TV cannot or does not identify an SBB/STB, you should switch the TV to STAND-ALONE mode with restricted operation.

Operational Modes

When this TV is in Hotel mode and is operated with an SBB/STB, it is in one of two states: ONLINE or STAND-ALONE

In the STAND-ALONE state, the TV will act as a Hotel TV, but without active communication. This is to prevent guests from trying to cheat the system by disconnecting the SBB/STB.

 

Stand-alone

 

SBB/STB Online if one success

Mode

 

 

 

within 10 attempts

 

Power

SBB/STB

SBB/STB Status-Attempt

ON

Online-10

every 2 seconds

consecutive fails

 

 

Online Mode

Poll Rate 20/sec

To set the options for Stand-alone or Interactive (Online) mode, refer to pages 17-21 (Setting the hotel option data : Menu Items.)

You can restrict all (or some) operations to prevent guests from "cheating" the TV system.

You can can set Volume limits and lock or unlock the Panel buttons.

Still image warning

Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama or 4:3 format images, stock or news bars or crawls) on the screen. Displaying still pictures continually can cause uneven screen wear, which will affect image quality. To reduce the chance that this effect will occur, please follow the recommendations below:

Avoid displaying the same TV channel for long periods.

Always try to display a full screen image.

Reduce brightness and contrast to help to prevent the occurrence of after-images.

Use all TV features designed to reduce image retention and screen burn-in. Refer to the proper user manual section for details.

Securing the Installation Space

When you install the TV, maintain the distances shown below between the TV and other objects (walls, cabinet sides, etc.) to ensure proper ventilation. Failing to do so may result in a fire or problems with the TV caused by an increase in its internal temperature.

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

 

xx If you use parts provided by another manufacturer, it may cause a problem with the product or cause the product to fall, leading to serioius injury.

Installation with a stand.

Installation with a wall-mount.

4 inches

4 inches

4 inches

 

4 inches

4 inches

4 inches

 

4 inches

Additional Information

The appearance of the TV and its accessories may differ from the illustrations in this manual, depending on the TV.Be careful when you touch the TV if it is on or has been on for a period of time. Some parts can be hot.

[HG470570_HOTEL-ZA]ENG.indd 2

 

 

2012-04-17 8:40:49

 

 

 

 

 

 

Contents

 

yy

Introduction...............................................................................................................................................................

2

yy

Operational Modes....................................................................................................................................................

2

yy

Still image warning.....................................................................................................................................................

2

yy Securing the Installation Space..................................................................................................................................

2

yy

Additional Information................................................................................................................................................

2

yy

Accessories...............................................................................................................................................................

4

yy Installing the LED TV Stand.......................................................................................................................................

5

yy Assembling the swivel (32 inch TVs or larger).............................................................................................................

7

yy

The Control Panel......................................................................................................................................................

8

yy

The Connection Panel...............................................................................................................................................

9

yy

The Remote Control................................................................................................................................................

11

yy Connecting the TV with an SBB or STB...................................................................................................................

12

yy

B-LAN (HG478/578)................................................................................................................................................

14

yy Connecting the RJP (Remote Jack Pack)................................................................................................................

15

yy Setting the Hotel Option Data..................................................................................................................................

17

yy Installing the Wall Mount..........................................................................................................................................

32

yy

Anti-theft Kensington Lock......................................................................................................................................

33

yy

Specifications..........................................................................................................................................................

34

yy

Dimensions..............................................................................................................................................................

35

ENGLISH

Symbols Used in this Manual

t

S

Indicates that you can press the

Note

One-Touch Button

 

TOOLS button on the remote control

 

 

 

to use this function.

 

 

English 3

[HG470570_HOTEL-ZA]ENG.indd 3

 

 

2012-04-17 8:40:49

 

 

 

 

 

 

Accessories

Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.The items’ color and shape may vary, depending on the model.

The parts for the stand are listed under Stand Components on the following page.

yy Remote Control (AA59-00628A) & Batteries (AAA x 2)

yy

Hotel Mount Kit

yy Owner’s Instructions

yy

Power Cord

yy Safety Guide / Quick Setup Guide

yy

Data Cable

(Not available in all locations)

 

(BN39-00865B, BN39-01011C : except 478/578 model)

4 EA (M4 X L12)

 

 

yy Security Screws

 

 

–– Bit tool (sold separately)

 

 

4 English

[HG470570_HOTEL-ZA]ENG.indd 4

 

 

2012-04-17 8:40:50

 

 

 

 

 

 

Installing the LED TV Stand

The 32” and larger LED TVs have swivel stands. You can set these stands so that the TVs swivel 20 degrees left and right. 60 degrees left and right, or 90 degrees left and right. See page 7. The 26” LED TVs do not have swivel stands.

Components

When installing the stand, use the provided components and parts.

 

A

1 EA

B 1 EA

 

 

 

 

C

x8 (M4 X L12)

 

 

 

D

x4 (M4 X L12, SECURITY)

yy Stand (depending on the model)

yy Guide Stand

yy Screws

1

C

x4

2

 

 

Top View

 

 

 

(M4 X L12)

 

 

 

 

 

B

Front

A

ATTENTION

Rear

DO NOT USE

DO NOT USE

DO NOT USE

CHEMICALS

GREASE

OIL

Place a soft cloth over the table to protect the TV, and then place the TV on the cloth screen side down.

Insert the Stand Guide into the slot on the bottom of the TV.

3 Side View

(Correct assembly)

(Incorrect assembly)

4

C

x4

 

 

(M4 X L12)

D x4

(M4 X L12,

SECURITY)

English 5

[HG470570_HOTEL-ZA]ENG.indd 5

 

 

2012-04-17 8:40:54

 

 

 

 

 

 

¦¦ Hotel Mount Kit

Bolt + Nut

Long Bolt (2EA)

Short Bolt (2EA)

Nut (2EA)

Washer (2EA)

Top

Bottom

Affixing the stand to a flat surface such as a

dresser top, desk top, or entertainment center.

Make sure to distinguish between the front and back of the Stand and Stand Guide when assembling them.Make sure that at least two people lift and move the TV.

6 English

[HG470570_HOTEL-ZA]ENG.indd 6

 

 

2012-04-17 8:40:56

 

 

 

 

 

 

Assembling the swivel (32 inch TVs or larger)

¦¦ 60° swivel

Leaving the BRACKET HOLDER SWIVEL unchanged lets the TV swivel 20° left and right. Rotating the BRACKET HOLDER SWIVEL 180°, and then assembling the stand as shown below lets the TV swivel 60° left and right.

¦¦ 90° swivel

Removing the BRACKET HOLDER SWIVEL and assembling the stand as shown below without the BRACKET HOLDER SWIVEL lets the TV swivel 90° left and right.

English 7

[HG470570_HOTEL-ZA]ENG.indd 7

 

 

2012-04-17 8:40:58

 

 

 

 

 

 

Using the TV's Controller

The color and shape of the TV Controller may vary depending on the model.

The TV's Controller, a small joy stick like button on the bottom right side of the TV, lets you control the TV without the remote control.

 

 

 

 

 

 

 

 

CONTENT

Function menu

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Down (Front)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Remote control sensor

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Left

 

 

 

Right

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TV Controller

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Up (Rear)

Power on

Turn the TV on by pressing the Controller when the TV is in standby mode.

Adjusting the volume

Adjust the volume by moving the Controller from side to side when the

 

 

 

power is on.

 

 

 

 

Selecting a channel

Select a channel by moving the Controller backwards and forwards when

 

 

 

the power is on.

 

 

 

 

Using the Function menu

To view and use the Function menu, press and release the Controller

 

 

 

when the power is on. To close the Function menu, press and release the

 

 

 

Controller again.

 

 

 

 

Selecting the MENU (m)

With the Function menu visible, select the MENU (m) by moving the

 

 

 

Controller to the left. The OSD (On Screen Display) Menu appears. Select an

 

 

 

option by moving the Controller to the right. Move the Controller to the right

 

 

 

or left, or backwards and forwards to make additional selections. To change

 

 

 

a parameter, select the it, and then press the Controller.

 

 

 

 

Selecting Contents Home

With the Function menu visible, select Contents Home

 

 

) by

)

moving the Controller backwards. The Contents Home main screen

 

 

 

appears. Select an application by moving the Controller, and then pressing

 

 

 

the Controller.

 

 

 

 

Selecting a Source (s)

With the Function menu visible, open the Source(s) screen by pushing

 

 

 

the Controller to the right. The Source screen appears. To select a

 

 

 

source, move the Controller back and forth. When the source you want is

 

 

 

highlighted, press the Controller.

 

 

 

 

Power Off (P)

With the Function menu visible, select Power Off (P) by pulling the

 

 

 

Controller forwards, and then press the Controller.

 

 

 

 

To close the Menu, Contents Home, or Source, press the Controller for more than 1 second.

Standby mode

Your TV enters Standby mode when you turn it off, and continues to consume a small amount of electric power. To be safe and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on vacation, for example). It is best to unplug the power cord.

8 English

[HG470570_HOTEL-ZA]ENG.indd 8

 

 

2012-04-17 8:40:59

 

 

 

 

 

 

The Connection Panel

 

9

1

[46" Model]

5

!

6

8

Whenever you connect an external device to your TV, make sure that power on the TV and the device is turned off.When connecting an external device, match the color of the connection terminal to the cable.

1COMPONENT IN / AV IN1 (46" Model: COMPONENT IN / AV IN)

––Connect audio cables to "R-AUDIO-L" on your TV and the other ends to corresponding audio out jacks on an A/V device.

––Connects Component video / audio.

––The COMPONENT IN jack is also used as the VIDEO 1 jack.

––Connect component video cables (optional) to the component jacks ("PR", "PB", "Y") on the rear of your TV and the other ends to corresponding component video out jacks on a DVD player.

––If you wish to connect both the Set-Top Box and a DVD player, you should connect the Set-Top Box to the DVD and connect the DVD to the component jacks ("PR", "PB", "Y") on your TV.

––The PR, PB and Y jacks on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.

––Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of the TV set and the other ends to corresponding audio out jacks on the external device.

––When connecting to AV IN, the color of the AV IN [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).

2DATA

––Used to support data communication between the TV and the SBB.

––Connects using RJ-12 TV type plugs.

3HDMI IN 1 (DVI), 2, 3 / PC/DVI AUDIO IN : Connects to the HDMI jack of a device with an HDMI output.

No sound connection is needed for an HDMI to HDMI connection. HDMI connections carry both audio and video.

Use the HDMI IN 1 jack for a DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter (DVI to HDMI) for the video connection and the PC/DVI AUDIO IN jacks for audio.

English 9

[HG470570_HOTEL-ZA]ENG.indd 9

 

 

2012-04-17 8:41:00

 

 

 

 

 

 

4DIGITAL AUDIO OUT (OPTICAL): Connects to a Digital Audio component.

5PC / DVI AUDIO IN: Connect to the audio output jack on your PC.

6PC IN: Connect to the video output jack on your PC.

7AUDIO OUT: Connects to the audio input jacks on an Amplifier/Home Theater.

8ANT IN

––To view television channels correctly, the TV must receive a signal from one of the following sources:

––An outdoor antenna / A cable television system / A satellite receiver

9EX-LINK : Connect this jack to the jack on the optional RJP (Remote Jack Pack). This will allow you to connect external devices (Camcoder, PC, DVD players etc) easily.

0 USB / CLONING

––Connector for software upgrades and Media Play, etc.

––Service connection.

!VIDEO / R-AUDIO-L

––Connect a VIDEO cable to an appropriate external A/V device such a VCR, DVD, or Camcorder.

––Connect audio cables to "R-AUDIO-L" on your TV and the other ends to corresponding audio out jacks on the A/V device.

10 English

[HG470570_HOTEL-ZA]ENG.indd 10

 

 

2012-04-17 8:41:00

 

 

 

 

 

 

Samsung HG32NA478PFXZA, 570, HG40NA570LFXZA, 470, HG39NA570CFXZA User Manual

The Remote Control

This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired customers.

Turns the TV on and off.

Press to directly access channels.

Press to select additional digital channels being broadcast by the same station. For example, to select channel ‘54-3’, press ‘54’, then press '-' and ‘3’.

Adjust the volume.

Display the channel list on the screen.

HOME: Display REACH menu only if

REACH has been downloaded to TV.

Quickly select frequently used functions.

Select on-screen menu items and change menu values.

Return to the previous menu.

Buttons used in Channel list, Media Play menu, etc. button: Enter the hour your want the TV to turn on.

Use these buttons in the Media Play and

Anynet+ modes.

Installing the batteries (Battery size: AAA)

HDMI

PRE-CH

CHLIST

HOME MENU CONTENT

ALARM

SLLEP SRS P.MODE

P.SIZE CC MTS

Display and select the available video sources.

Selects the HDMI mode directly.

Return to the previous channel.

Cut off the sound temporarily.

Change channels.

Display the main on-screen menu.

Displays My Contents, Watch TV and

Source icons on the TV screen.

Press to display channel and TV information on the TV screen.

Exit the menu.

SLEEP: Sets the Sleep Timer.

SRS: Lets you select the SRS TruSurround HD mode.

P.MODE: Select the picture mode (Standard, Movie, etc.)

P.SIZE: Choose the picture size. CC: Controls the caption decoder.

MTS: Press to choose stereo, mono or Separate Audio Program (SAP broadcast).

NOTE

xx Use the remote control within 23~33 feet of the TV.

xx Bright light may affect the performance of the remote control. Avoid using near fluorescent lights or neon signs.

xx The color and shape of the remote may vary depending on the model.

After you have installed the batteries, use a screwdriver to screw in the screw that holds the battery cover closed.

English 11

[HG470570_HOTEL-ZA]ENG.indd 11

 

 

2012-04-17 8:41:01

 

 

 

 

 

 

Connecting the TV to an SBB or STB

TV Rear Panel

Data Cable

1.Connect the DATA jack of the TV to the ETH MODEM jack of the STB (SBB) with the Data cable.

Data cables are polarized. Make sure you attach the end marked TV Side to the TV and the end marked STB Side to the STB. Also make sure you use the correct data cable for your vendor.

12 English

[HG470570_HOTEL-ZA]ENG.indd 12

 

 

2012-04-17 8:41:01

 

 

 

 

 

 

¦¦ List of Vendors and Compatible Data Cables Supplied with the TV

yy Confirm you are using the correct data cable for your vendor. Refer to the code label on the data cables.

 

Confirm the code on the

Note the labeled end.

Code Label

Note the labeled end.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Vendor

 

Cable code

Pin assign

 

Remark

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OCC

 

BN39-00865B

 

 

 

 

 

Provided

 

 

NXTV BN39-01011B

nStreams BN39-01110A

MTI

BN39-01011C

LodgeNet MTI

Provided

 

 

English 13

[HG470570_HOTEL-ZA]ENG.indd 13

 

 

2012-04-17 8:41:02

 

 

 

 

 

 

Loading...
+ 30 hidden pages