COLORTELEVISION
CL21Z43/21Z50/21Z57/21Z58/
21A530/21A730
Owner’s Instructions
Before operating, please read this manual carefully, and retain it for future reference.
Register your product at www.samsung.com/global/register. Record your Model and Serial number.
▪ Model __________ ▪ Serial No. __________
Themodel.product color and shape may vary depending on the
Front Panel
1 On-screen menu display
2 Volume adjustment
3 Channel selection
4 Remote control sensor
5 Indicator (Standby or Timer)
6Power on/off
The 2 and 3 buttons also have the same function as the ◄/►/▲/▼ buttons on the remote control.
If the remote control no longer works or you have misplaced it, you can use the controls on the panel of the television.
Themodel.product color and shape may vary depending on the
Rear Jack |
|
1 |
|
2 |
3 |
4 3
Whenever you connect an audio or video system to your television, ensure that all elements are switched off. Please be sure to match the color coded input terminals and cable jacks.
1 Audio/Video Output Jacks
Connect to the audio/video input jacks of a recording VCR.
2 Audio/Video Input Jacks
Connect to the audio/video output jacks of VCRs, DVD players and similar devices.
3 Component Video Input Jacks (Y, PB, PR)
Connect to the Component video outputs of a DVD or DTV set-top box. 480i video signal input is available.
When using the Component Video input, connect audio jacks to “AV IN 2 (AUDIO-L/R)”.
4 ANT IN
Connect to an antenna or to a cable TV system.
Side Jack
1
2 3
Please be sure to match the color coded input terminals and cable jacks.
When both the side and rear jacks (AV IN 2) are connected to external equipment, the side receives priority.
1 Audio Input Jacks
Connect audio signals from a camcorder or video game.
2 Video Input Jack
Connect a video signal from a camcorder or video game.
3 Headphone Jack
Connect a set of external headphones to this jack for private listening.
English - 1 |
AA68-03806S-01 |
Operation of remote control may be affected by bright artificial light near to the TV.
This is a special remote control for the visually impaired, and has Braille points on the POWER, Channel and Volume buttons.
1POWER
Turns the TV on and off.
2Number buttons
Press to select channels directly on the TV.
3–
Press to select channels over 100. For example, for channel 122, press “-”, then “2”, then “2”.
4VOL +, VOL -
Press to increase or decrease the volume.
5MENU
Displays the main on-screen menu.
6▲/▼/◄/►
Controls the cursor in the menu.
7ENTER
While using the on-screen menus, press ENTER to activate (or change) a particular item.
8MTS
(Multi-channel Television Sound)
Press to choose “Stereo”, “Mono”, or “SAP” (Secondary Audio Program).
Installing Batteries
9R.SURF
Press to automatically return to a preferred channel after a userpreset time delay.
0SOURCE
Press to display all of the available video sources.
!INFO
Press to display information on the TV screen.
@PRE-CH
Tunes to the previous channel.
# CH , CH
Press to change channels.
$EXIT
Press to exit the menu.
%MUTE
Press to temporarily cut off the sound.
^SLEEP
Press to select a preset time interval for automatic shut off.
Remove the cover. Install two AAA size batteries, then replace the cover.
When the remote control does not operate normally, check that the “+” and “–” ends of
the batteries are inserted correctly or the batteries are drained.
Do not mix battery types, i.e. alkaline and manganese.
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
1Press the MENU button.
The main menu is displayed on the screen. Its left side has five icons: Input, Picture, Sound, Channel, and “Setup”.
2Press the ▲ or ▼ button to select one of the icons. Press the ENTER button to access the icon’s sub-menu.
3Press the ▲ or ▼ button to move to items in the menu. Press the ENTER button to enter items in the menu.
4Press the ▲/▼/◄/► button to change the selected items. Press the MENU button to return to the previous menu.
5Press the EXIT button to exit from the menu.
English - 2
When the TV is initially powered on, several basic customer settings proceed automatically and subsequently.
The following settings are available.
1 Press the POWER button |
|
|
|
on the remote control. |
|
The message “Plug & |
|
Play” is displayed. It |
Plug & Play |
flickers for a little while and |
|
then Language menu is |
|
automatically displayed. |
|
2Press the ◄ or ► button to select the language, then press the MENU button.
The message “Ant input check” is displayed.
|
|
Setup |
Time |
|
► |
Plug & Play |
► |
|
Caption |
|
► |
Language |
: English |
|
▼More |
|
|
|
Adjust |
Skip |
3Make sure that the antenna is connected to the TV. Press the ENTER button, then the “Channel” is displayed.
4Press the ◄ or ► button to select “Air”, “STD”, “HRC”, or “IRC”, then the MENU button. The message “Auto Program” is displayed.
Ant input check |
|
|
Auto Program |
|
Skip |
|
|
|
|
|
|
|
|
Channel |
Auto Program |
|
► |
Add/Delete |
: Deleted ► |
|
Air/CATV |
: Air |
|
Name |
: ---- |
|
Adjust |
Skip |
5 Press the ENTER button to |
|
|
|
|
|
||
select “Start”. The TV will |
Auto Program |
||
begin memorizing all of the |
|||
Air |
7 |
||
available channels. Press the |
|||
Start |
|
||
ENTER button to stop. |
Enter |
Skip |
|
|
|||
|
|
|
continued...
6After all available channels are stored, the “Time” is displayed. Press the ENTER button. Press the ◄ or ► button to move to the hour or minute. Set the clock by pressing the ▲ or ▼ button.
6When you have finished, press the MENU button. The “Enjoy your watching.” is displayed.
Plug & Play feature doesn’t work in theAV mode.
Re-setting the Plug & Play
Method:
MENU ▲/▼ (Setup) ENTER ▲/▼ (Plug & Play) ENTER
|
|
|
Time |
Clock |
-- : -- |
am |
|
On Timer |
-- : -- |
am |
Off |
Off Timer |
-- : -- |
am |
Off |
Sleep Timer : |
Off |
|
On Timer Volume : |
10 |
|
Move |
Enter |
Return |
Enjoy your watching
|
|
Setup |
Time |
|
► |
Plug & Play |
► |
|
Caption |
|
► |
Language |
: English |
|
▼More |
|
|
Move |
Enter |
Return |
Source List |
|
|
|
|
|
Source List |
|
You can switch between |
TV |
|
|
viewing signal from |
AV1 |
|
---- |
connected equipment, such |
AV2 |
|
---- |
as a VCR, DVD, set-top |
Component |
---- |
|
box, and the TV source |
|
|
|
(broadcast or cable). |
Move |
Enter |
Return |
Press the SOURCE
button on the remote control repeatedly to select the desired signal source.
Edit Name
You can give a name to the external source.
|
|
Edit Name |
AV1 |
: |
---- |
VCR |
||
AV2 |
: |
DVD |
Component : |
Cable STB |
|
Sat. STB |
||
|
|
AV Recv. |
|
|
DVD Recv. |
|
|
Game |
|
|
Camcorder |
|
|
DVD Combo |
Move |
Enter |
Return |
English - 3