Samsung AS09CM1N, AS12CM2N, AS09CM1X, AS12CM2X, AS12CM1N User Manual

USER’S MANUAL

Indoor Unit	Outdoor Unit
AS09CM1N	AS09CM1X
AS09CM2N	AS09CM2X
AS12CM1N	AS12CM1X
AS12CM2N	AS12CM2X
AS18CM1N	AS18CM1X
AS18CM2N	AS18CM2X
AS24CM1N	AS24CM1X
AS24CM2N	AS24CM2X

Split-type Air Conditioner

(Cooling)

E DB98-21718A(2)

Register your product at www.samsung.com/global/register

Safety Precautions

You should take the following safety precautions when using your air conditioner.

WARNING	• If you don’t follow the safety precautions, you may get the risk of an electric
	shock, injury or death.

•The manufacturer or qualified service personnel must install this air conditioner.

•Turn off the electric power before repairing, installing or cleaning.

DURING OPERATION

DISPOSING OF THE UNIT

OTHERS

Do not repair the air conditioner at your discretion.

It is recommended to contact a service center directly.

Never spill any kind of liquid on the air conditioner.

If this happens, turn off the air conditioner and contact an authorized service center.

Do not insert anything between the airflow blades to prevent damage of the inner fan and consequent injury. Keep children away from the air conditioner.

Do not place any obstacles in front of the air conditioner.

Do not spray any kind of liquid into the indoor unit. If this happens, turn off the air conditioner and contact a service center.

Make sure that the air conditioner is well ventilated at all times: Do not place a cloth or other materials over it.

Remove the batteries if you don’t use the remote control for a long time. (If applicable)

Use the remote control within 7 meters from the indoor unit. (If applicable)

Before throwing out the air conditioner, remove the batteries from the remote control.

When you dispose of the air conditioner, consult your dealer. If pipes are removed incorrectly, refrigerant may blow out and cause air pollution. When it contacts with your skin, it can cause skin injury.

The package of the air conditioner should be recycled or disposed of properly for environmental reasons.

Never store or load the air conditioner upside down or sideways to prevent the damage to the compressor.

Young children or infirm persons should be always supervised when they use the air conditioner.

Max current is measured according to IEC standard for safety.

Current is measured according to ISO standard for energy efficiency.

E-2

Contents

	PREPARATION
	■ Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	2
	■ Name of Each Part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	4
	■ Remote Control-Buttons and Display . . . . . . . . . . . . . . . . . . . . . .	6
	■ Inserting the Remote Control Batteries . . . . . . . . . . . . . . . . . . . . .	7
	■ Getting Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	8
	OPERATION
	■ Selecting the Auto Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	9
	■ Selecting the Cool Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	10
	■ Selecting the Dry Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	11
	■ Selecting the Fan Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	12
	■ Selecting the Turbo Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	13
	■ Selecting the Energy Saving Function . . . . . . . . . . . . . . . . . . . . .	14
	■ Selecting the Auto Cleaning Function . . . . . . . . . . . . . . . . . . . . . .	15
	■ Selecting the Sound On / Off Function . . . . . . . . . . . . . . . . . . . . . .	16
	■ Selecting the Anions Function . . . . . . . . . . . . . . . . . . . . . . . . . . . .	17
	■ Adjusting the Airflow Direction Vertically . . . . . . . . . . . . . . . . . . . .	18
	■ Adjusting the Airflow Direction Horizontally . . . . . . . . . . . . . . . . . .	19
	■ Setting the On Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	20
	■ Setting the Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	21
	■ Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	22
RECOMMENDATIONS FOR USE
	■ Operating Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . .	23
	■ Temperature and Humidity Ranges . . . . . . . . . . . . . . . . . . . . . . . .	24
	■ Operating Your Air Conditioner Without the Remote Control . . . . .	25
	■ Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	26
	■ Cleaning Your Air Conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . .	27
	■ Cleaning Anti-Allergy and Deodorizing Filter (Option) . . . . . . . . . .	27
	TECHNICAL SPECIFICATIONS

E-3

Name of Each Part

The design and shape can be changed according to the model.

Indoor Unit

Air Inlet

Room Temperature sensor

Power(On/Off) button

Air filter		Airflow blades
(under the grille)		(outlet)

Set temperature & room temperature

	Operation indicator
(Auto-Cool, Cool, Dry, Fan : Blue)					Auto cleaning indicator
					(Blue)
	Turbo function indicator				Energy saving indicator
	(Blue)				(Blue)
	Timer indicator				Anions indicator
	(Orange)				(Blue)

Fan speed indicator (Blue)

Remote control sensor

Note In the Auto mode, 2 fan indicators increase and decrease continuously and turn round.

In the modes except the Auto mode, the fan speed indicator increases and decreases continuously and turn round each time you press the

button. If you set the Turbo function, the fan speed indicator turns round with the maximum setting and speed.

If you want to turn on/off the Display during operation, press the button on the remote control.

The room temperature sensor senses air temperature around the sensor, and shows the temperature on the display.

E-4

Outdoor Unit

AS09CM1(2)X AS12CM1(2)X

Air Inlet(Rear)

Air Outlet

Connection Valve

(inside)

Outdoor Unit

AS18CM1(2)X AS24CM1(2)X

Air Inlet(Rear)

Air Outlet

Connection Valve

E-5

Remote Control - Buttons and Display

		Operating mode
	Remote control	( AUTO,	COOL,
		DRY,	FAN)
	transmission indicator
	Battery life indicator	Sound On /Off indicator
		Turbo function indicator
	Fan speed indicator
		Temperature setting
	Anions indicator
		Air flow direction
	Sleep mode indicator
	On Timer indicator	Off Timer indicator
		Energy saving indicator
	Power (On/Off) button	Temperature adjustment
		buttons
	Mode selection button	Digital On/Off button

(AUTO, COOL, DRY, FAN)

Fan speed adjustment button Swing button

Turbo button Sound On/Off button Energy saving button Auto Cleaning button

On Timer button Timer Set/Cancel button

Off Timer button

Sleep button

Anions button

E-6

Inserting the Remote Control Batteries

You must insert or replace the remote control batteries when:

You purchase the air conditioner

The remote control does not work correctly

Note Use two AAA, LR03 1.5V batteries.

Do not use old batteries or different kinds of batteries together.

Batteries may be completely discharged after 12 months, even

if they have not actually been used.

1Remove the battery cover in the rear of the remote control by pushing it with your thumb.

2Insert two batteries, respecting the polarities as indicated by the + and - symbols.

3Close the cover by sliding it back in its place.

E-7

Getting Start

The User’s Manual provides you with valuable information about your air conditioner. Please read this manual carefully before using the air conditioner.

It will help you take full advantage of the unit's features.

You have already seen the basic description of the unit on pages from 4 to 6. Starting with the next page, you will find a series of step-by-step procedures for each function available.

The illustrations in the step-by-step procedures use three different symbols:

PRESS	PUSH	HOLD DOWN

E-8

Selecting the Auto Mode

You can select the Auto mode if you want to cool your room automatically.

You can adjust the temperature in this mode.

1 If necessary, press the (On/Off) button.

Result:	The operation indicator on the indoor unit lights up.
	The air conditioner starts up in the mode you selected last.
	The indoor unit beeps.

2 Press the button on the remote control until is displayed.

Result: The indoor unit beeps each time you press the button.The air conditioner runs in the Auto mode.

The Auto mode cools the room depending on the set temperature.

Note You can change modes at any time.

3 Press the button to adjust the temperature until the required temperature is displayed.

You can set the temperature between 16°C and 30°C. Result: Each time you press the button:

-The temperature is adjusted by 1°C

-The indoor unit beeps

The fan speed is adjusted automatically.

2 fan speed indicators increase and decrease continuously and turn round.

Control Panel

E-9